Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MOF-derived PdMn and PdCo bimetallic systems as bifunctional electrocatalysts for overall water splitting

  • Mazarío-Santa-Pau, Jaime
  • Martínez, Jordan Santiago
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Agostini, Giovanni
  • Villalobos-Portillo, Eduardo
  • Bazta, Otman
  • Trasobares, Susana
  • Calvino, Jose Juan
  • Calvente, Juan Jose
  • Olloqui-Sariego, Jose Luis
  • Cerezo-Navarrete, Christian
  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Bimetallic Metalorganic Framework (MOF)-derived PdCo and PdMn nanoparticles have been shown to be excellent bifunctional electrocatalysts for overall electrocatalytic alkaline water splitting. Through an innovative strategy combining a soft chemical (Q) transformation followed by pyrolysis (T) of PdCo-MOF and PdMn-MOF precursors, well-defined and uniformly distributed nanoparticles supported on N-doped graphitic carbon were synthesized (PdCo-QT and PdMn-QT, respectively). The influence of the first row transition metal into the bimetallic nanoparticles on the electrocatalytic activity for both electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) was assessed. Comprehensive characterization using TEM/STEM, PXRD, Raman, XAS and XPS revealed the ultimate structural and compositional features of the synthesized materials. Notably, the bimetallic PdCo-based catalyst demonstrated the best electrocatalytic performance, exhibiting the lowest Tafel slopes for both HER and OER processes, along with superior thermodynamic and kinetic metrics compared to the bimetallic PdMn and monometallic Pd nanoparticles. The exceptional catalytic activity of the PdCo-QT electrode competes with that of benchmark materials, attributed to a synergistic effect between Pd and the secondary metal (Co), likely forming Pd-O(OH)-Co active centers. Moreover, operando and after electrocatalysis characterizations of the electrodes validate the remarkable stability and efficiency of PdCo-QT, underscoring its potential for practical water-splitting applications., Financial support by Severo Ochoa center of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini).r 130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Synthesis and Applications of N-Doped Carbon Supported Pd-Based Bimetallic Nanoparticles by Synergistic Chemical and Thermal Modifications of MOFs

  • Martínez, Jordan Santiago
[ES] Esta tesis presenta el desarrollo de procesos catalíticos sostenibles mediante el uso de catalizadores heterogéneos avanzados, centrándose en la síntesis de composites derivados de MOFs para la semihidrogenación selectiva de alquinos y la división electroquímica del agua. Inicialmente, se investigó una nueva metodología para convertir PdIn-MOF en nanopartículas soportadas en carbono dopado con nitrogeno. La combinación de tratamientos químico y térmicos permitió obtener el composite PdIn-QT, destacable por su estabilidad y control estructural. Además, el estudio demostró que las propiedades de las nanopartículas y del carbono se pueden controlar ajustando la polaridad del disolvente y seleccionando tipos específicos de aminas. Después de la elaboración de los nuevos precursores basados en MOFs de PdCo y PdMn, se aplicó nuestra estrategia de transformación de MOFs recientemente desarrollada, basada en la combinación de tratamientos químicos y térmicos. Posteriormente, se emplearon estos nuevos catalizadores basados en PdCo, PdMn, y PdIn para la hidrogenación selectiva de fenilacetileno, logrando alta estabilidad y selectividad. En particular, el PdCo-QT mostró un rendimiento excepcional en procesos en continuo en fase gaseosa, subrayándose su potencial para posibles aplicaciones industriales. Finalmente, estos materiales se utilizaron como electrodos y mostraron un rendimiento competitivo en comparación con catalizadores de referencia en las reacciones de evolución de hidrógeno y oxígeno (HER y OER). En particular, PdCo-QT, con su alta eficiencia y estabilidad, demostró un gran potencial para aplicaciones sostenibles en la división del agua. En resumen, este trabajo introduce una nueva familia de catalizadores con propiedades ajustables, adecuados tanto para la catálisis industrial como para aplicaciones en generación de energía limpia., [CA] Aquesta tesi presenta el desenvolupament de processos catalítics sostenibles mitjançant l'ús de catalitzadors heterogenis avançats, centrant-se en la síntesi de composites derivats de MOFs per a la semihidrogenació selectiva d'alquins i la divisió electroquímica de l'aigua. Inicialment, es va investigar una nova metodologia per a convertir PdIn-MOF en nanopartícules suportades en carboni. La combinació dels tractaments químic i tèrmic va permetre obtindre el composite PdIn-QT, destacat per la seua estabilitat i control estructural. A més, l'estudi va demostrar que les propietats de les nanopartícules i del carboni es controlen ajustant la polaritat del dissolvent i seleccionant tipus específics d'amines. Després de l'elaboració de nous precursors basats en MOFs de PdCo i PdMn, es va aplicar la nostra estratègia de transformació de MOFs recentment desenvolupada, basada en la combinació de tractaments químics i tèrmics. Posteriorment, es van emprar aquestes catalitzadors basats en PdCo, PdMn i PdIn per a la hidrogenació selectiva del fenilacetilè, aconseguint una alta estabilitat i selectivitat. En particular, el PdCo-QT va mostrar un rendiment excepcional en processos en continu en fase gasosa, subratllant-se el seu potencial per a aplicacions industrials. Finalment, aquests materials, quan s'utilitzaren com a elèctrodes, van mostrar un rendiment competitiu en comparació amb els catalitzadors de referència en les reaccions d'evolució d'hidrogen i oxigen (HER i OER). En particular, el PdCo-QT, amb la seua alta eficiència i estabilitat, va demostrar un gran potencial per a aplicacions sostenibles en la divisió de l'aigua. En resum, aquest treball introdueix una nova família de catalitzadors amb propietats ajustables, adequats tant per a la catàlisi industrial com per a aplicacions de generació d'energia neta., [EN] This thesis develops sustainable catalytic processes using advanced heterogeneous catalysts based on the preparation of MOF-derived composites for selective semi-hydrogenation of alkynes and electrochemical water-splitting applications. Precisely, new methods were followed to transform PdIn-MOF into N-doped carbon-supported nanoparticles. First, a combined chemical and thermal treatment afforded the PdIn-QT composite, which has been distinguished by its stability and structural control. The material was thoroughly compared to the material resulting from the traditional direct pyrolysis method. Then, the study demonstrates that the properties of nanoparticles and carbon can be improved by optimizing solvent polarity and the type of amines involved during the chemical transformation. Later, after the elaboration of the new PdCo, and PdMn MOF precursors, our newly developed MOF transformation strategy was applied. The resulting PdCo, PdMn, and PdIn-based catalysts were used in the selective hydrogenation of phenylacetylene. They showed excellent selectivity at quantitative conversion levels, with high stability. Among them, PdCo-QT showed excellent activity in continuous gas-phase processes, indicating its potential in industrial applications. Lastly, the first-row transition metal-based materials were tested as electrodes and showed competitive performance against benchmark catalysts in hydrogen and oxygen evolution reactions (HER and OER). Specifically, PdCo-QT showed highly efficient and stable performance, with great potential for sustainable water-splitting applications. In conclusion, this study reports on a new family of tunable catalysts suitable for both industrial catalysis and clean energy applications., I want to thank the financial support received from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron in collaboration with ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Trasobares, Susana
  • Calvino Gamez, José Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water Gas Shift under Magnetic Induction Heating

  • García-Zaragoza, Adrián
  • Río-Rodríguez, José Luis del
  • Cerezo-Navarrete, Christian
  • Molina, Maria Asuncion
  • Costley-Wood, Lucy
  • Mazarío-Santa-Pau, Jaime
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
  • Beale, Andrew M
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Reducing CO2 to CO via the reverse water¿gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods., The authors thank the financial support from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00, PID2021-126080OA-I00, TED2021-130191B-C41, TED2021-132087A-I00 and CNS2023-145078 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2022/10), and Junta de Andalucia (ProyExcel_00706). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.L.R.-R. thanks to the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Unversitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO. The authors would also like to thank ALBA synchrotron for provision of beamtime 2023097780 on NOTOS beamline, and beamline scientist Eduardo Villalobos. Also, Diamond Light Source for measurements via Block Allocation Group Access on B18 during beamtime SP34632-4. The UK Catalysis Hub is kindly thanked for resources and support provided during these B18 measurements, via UCL's membership of the UK Catalysis Hub Consortium funded by EPSRC grant EP/R026939/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernandez-Salvador, Sergio
  • Montiel, Miguel A.
  • Molina, M. Asuncion
  • Calvente, Juan Jose
  • Beale, Andrew M.
  • Solla-Gullon, Jose
  • Olloqui-Sariego, Jose Luis
  • Río-Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol(- 1)), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization., The authors thank the financial support from the Spanish Govern-ment (PID2021-126799NB-I00, PID2022-140111OB-I00, PID2022-13 8491OB-C32, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) , by Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Uni-versitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. M.A.M. acknowledges funding from the EPSRC InFUSE Prosperity Partnership (EP/V038044/1) . The authors acknowledge ALBA Syn-chrotron for access to the NOTOS beamline under Proposal 2023097780 and Diamond Light Source for access to Beamline B18 under Proposal SP45829-1. The authors also thank Eduardo Villalobos, Carlo Marini and the B18 beamline staff for their assistance during the XAS mea-surements. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. Authors are also grateful to Ana Cristina Martinez Cantos (Institute of Electrochemistry, University of Alicante) for her work in the identification and determination of products in the glycerol electro-oxidation process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green One-Pot Synthesis of Benzimidazoles from Dinitroarenes in Water Using a Ru-Doped Co-Based Heterogeneous Catalyst

  • del Río-Rodríguez, Jose Luis
  • Molina, Maria Asunción
  • Costley-Wood, Lucy
  • Falcini, Chiara
  • Beale, Andrew M.
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A novel methodology is presented for preparing non-noble metal-based heterogeneous catalysts doped with low amounts of noble metals, yielding highly active and reusable materials for sustainable organic transformations. A new Co-Ru@C catalyst was developed by incorporating small ruthenium nanoparticles (1 wt %) and cobalt nanoparticles (10 wt %) on Vulcan carbon via pyrolysis of a ruthenium-doped cobalt metal-organic framework supported on carbon (2D-Co(Ru)MOF/C). Advanced characterization (in situ PXRD and XAS, HAADF-STEM, HRTEM) confirmed strong Co-Ru interactions, enhancing catalytic activity. The catalyst was evaluated in the one-pot reductive amination of dinitrobenzenes to benzimidazoles using molecular hydrogen and water, which is in line with green chemistry. The synergistic effect between Co and Ru enabled quantitative product yields under significantly milder reaction conditions than the existing ones. In addition, ruthenium was found to facilitate hydrogen activation in the bimetallic material compared with its undoped Co@C counterpart. Regarding stability, the Co-Ru@C catalyst retained its activity over at least five consecutive cycles without metal leaching or structural degradation. This material demonstrated a broad substrate scope, affording over 20 functionalized benzimidazoles in high yields. Half-gram-scale syntheses of commercial Diabazole and Fuberidazole further validated the scalability of this approach., Financial support from the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank the financial support provided by the grants (PID2022140111OB-I00, TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way for making Europe and European Union NextGenerationEU/PRTR). This project has also received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 101022507 and NextGenerationEU/PRTR. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/047). This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. XAS and XRD experiments were performed at NOTOS beamline at ALBA Synchrotron (proposal number 2023097780) with the collaboration of ALBA staff (Eduardo Villalobos and Carlo Marini). The authors thank Diamond Light Source, particularly B18 beamline team and D. Gianolio for their support during XAS measurement (proposal SP42561-1). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural transformation of carbon-encapsulated core-shell CoNi nanoparticles during magnetically induced CO2 reduction into CO

  • Cerezo-Navarrete, Christian
  • Marin, Irene Mustieles
  • Marini, Carlo
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
[EN] Controlling product distribution in CO2 hydrogenation is of great scientific interest, the selective CO production through the reverse water-gas shift reaction (RWGS) being one of the most investigated processes. Herein, we report the synthesis of new core-shell Co@Ni NPs encapsulated in carbon (Co@Ni@C) to prevent their aggregation at the high-temperatures reached during magnetically induced catalysis. This bifunctional system has been simultaneously used as heating agent and catalyst for the magnetically induced hydrogenation of CO2. While at low magnetic fields Co@Ni@C produces CH4:CO mixtures, at higher field amplitudes it selectively generates carbon monoxide. Indeed, Co@Ni@C has shown to be one of the most active catalysts reported to date, which reaches a maximum conversion of 74.2% with complete selectivity towards CO at 53 mT and 300 kHz. In addition, recycling and cyclability experiments have demonstrated that Co@Ni@C becomes fully selective for CO after being exposed to high field amplitudes (i.e. reaction temperature above 500 degrees C), even when it exposed to low magnetic fields again. This change in the selectivity is due to an atomic rearrangement of the core-shell structure, as was confirmed by EDX, XAS, TPR and TPD analysis., The authors also acknowledge European Union's Horizon 2020 research and innovation program H2020-LC-SC3-2020 (LAURELIN; n degrees : 101022507) , Agencia Estatal de Investigacion, Ministerio de Ciencia e Innovacion (PID2021-126080OA-I00, TED2021-132087A-I00 and RYC2020-030031-I) , Junta de Andalucia (ProyExcel_00706) and University of Seville (VI PP A. TALENTO; 2022/00000400) for financial support. We gratefully acknowledge Dr. Raf Roelant for his help with thermodynamic equilibrium calculations. C. Cerezo-Navarrete thanks Generalitat Valenciana Predoctoral Fellowship (GVA: ACIF/2019/076) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • del Río-Rodríguez, Jose Luis
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Beale, Andrew M.
  • Morales, Maria del Puerto
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)." J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 - Reference: 101022507) for PDRA contract at UCL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Carbon-encapsulated FeNi nanoparticles for efficient magnetically induced levulinic acid hydrogenation

  • Tatiana
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • García-Zaragoza, Adrián
  • Mazarío-Santa-Pau, Jaime
  • Martínez, Jordan Santiago
  • Chaudret, Bruno
[EN] Developing robust and efficient catalysts for magnetic induction heating (MIH) offers a sustainable approach for biomass valorization under mild conditions. Herein, we report a green and scalable synthetic method to prepare FeNi-based magnetic nanoparticles (MagNPs), with different atomic compositions, encapsulated in N-doped graphitic carbon (Fe1NiX@N-G), via single-step pyrolysis of glucose and urea. These bimetallic nanoparticles serve both as efficient heating agents and active catalysts. Among them, Fe1Ni0.25@N-G demonstrated excellent catalytic performance in the magnetically induced hydrogenation of levulinic acid (LA) in aqueous solution, achieving full conversion and complete selectivity to ¿-valerolactone (GVL) under mild conditions (63 mT, 320 kHz, 2 kW). Furthermore, the reactivity of Fe1Ni0.25@N-G was tested in the magnetically induced hydrogenation of other biomass-derived substrates of interest, such as 5-hydroxymethylfurfural (HMF), levoglucosenone, and vanillin, showing good activity and selectivity in all cases under mild reaction conditions. Finally, the robust encapsulation of the FeNi NPs in N-doped graphitic carbon strongly improved the stability of the catalyst in aqueous media, enabling its reuse up to four times under acidic conditions (pH ~2), for LA hydrogenation, and up to eight times under neutral conditions, such as HMF., The authors are thankful for the financial support from the European Union's Horizon 2020 research and innovation program under grant agreement no. 101022507. Financial support from the Severo Ochoa Centre of Excellence Program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms a part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J. M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable One-Pot Synthesis of N-Substituted Pyrroles Using a Multifunctional Cobalt-Based Catalyst

  • del Río-Rodríguez, Jose Luis
  • Tiscareño-Ferrer, Arisbeth
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The development of novel non-noble metal-based heterogeneous catalysts for organic compound synthesis has gained significant relevance in the last decades, aiming to maximize efficiency while minimizing environmental impact. A carbon-supported nitrogen phosphorus-cobalt catalyst (Co2PNx@NC) was found to be active for the one-pot synthesis of N-substituted pyrroles via the reductive coupling of nitrobenzene with 2,5-hexanedione. This work represents the first successful synthesis of this important group of molecules with >99% conversion and >99% chemoselectivity, using ethanol as a green solvent, non-noble metal-based catalyst, H-2 as the reductant, and mild reaction conditions simultaneously. The robustness of the catalyst has been investigated using several techniques, including HAADF-STEM, HRTEM, XEDS, and PXRD, revealing excellent stability after six successive runs. In the presence of this material, the hydrogenation of readily accessible nitroarenes followed by condensation yields more than 25 pyrroles in good to high yields. Beyond its advantageous step economy, the broad synthetic applicability of this methodology was demonstrated across a range of functionalized substrates, including the preparation of antifungal and antimycobacterial agents on a half-gram scale. A sustainability assessment of the process using Green Metrics, EcoScale, and GreenStar tools confirmed the effectiveness of ethanol as a green solvent for this process., Financial support by Severo Ochoa Centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). Jose Luis del Rio-Rodriguez thanks the MCIU for his FPU PhD contract FPU21/02562. Silvia Gutierrez-Tarrino thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In Situ Amine Formation to Modulate MOF-Derived PdIn N-Doped Carbon Catalysts

  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Martínez, Jordan Santiago
  • Molina, M. Asunción
  • Mazarío, Jaime
  • Costley-Wood, Lucy
  • Cerezo-Navarrete, Christian
  • Marini, Carlo
  • Villalobos-Portillo, Eduardo
  • Beale, Andrew M.
[EN] Metal-Organic Frameworks (MOFs) are versatile precursors for developing heteroatom-doped carbon-supported catalysts with complex structures and functionalities. In this work, we rationalize an amine-mediated approach that combines a mild chemical pretreatment with pyrolysis to direct the transformation of a PdIn-MOF precursor into dispersed PdIn intermetallic nanoparticles supported on N-doped carbon. Advanced characterization techniques, including synchrotron ex situ and in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD), demonstrate that the chemical pretreatment, involving in situ amine generation under reductive conditions, facilitates the early formation of Pd nanoparticles. This pre-nucleation influences the kinetics of intermetallic phase formation during the subsequent pyrolysis, promoting a more regulated alloying process. Systematically varying nitro precursors and solvents shows that amine sterics and basicity govern nanoparticle size, phase development, PdIn ratio, nitrogen doping, and surface area. Finally, catalytic evaluation in alkyne semihydrogenation shows that the family of PdIn catalysts thus prepared achieves outstanding selectivity and high productivity, outperforming benchmarking Pd/C and Lindlar catalysts across diverse substrates. Specifically, materials synthesized using ethanol and amines with low pKb values offer superior control over particle formation and catalytic behavior. Overall, these findings establish and explain a modular strategy for designing next-generation bimetallic catalysts for selective hydrogenation applications via MOF-derived syntheses., G.E. and J.S.M. contributed equally to this work. Financial support by the Severo Ochoa center of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIN/AEI/ 10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. The authors also thank Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia-Subprograma 1 (PAID-01-23) for financial support. Some of these experiments were performed at NOTOS beamline at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero). A. Yuste Rodrigo is acknowledged for experimental contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MOF-Derived PdCo and PdMn Systems as Versatile Catalysts in Alkyne Semihydrogenation

  • Martínez, Jordan Santiago
  • Carpisassi, Luigi
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Mora-Moreno, Carmen
  • Trasobares, Susana
  • Vaccaro, Luigi
  • Calvino, Juan José
  • Agostini, Giovanni
  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] This study investigates the structure and catalytic properties of bimetallic nanocomposites derived from PdCo- and PdMn-based metal-organic frameworks. These materials, synthesized via chemical (Q) and thermal treatments (T), resulted in PdCo-QT and PdMn-QT catalysts containing Pd-based nanoparticles modified with Co or Mn and supported on N-doped carbon. Detailed characterization techniques confirm these complex structures, including high-resolution transmission electron microscopy, scanning transmission electron microscopy energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The catalytic performances of these materials were evaluated for the selective semihydrogenation of phenylacetylene and 4-octyne under soft conditions (1 H2 bar, room temperature) in batch reactors, demonstrating very high selectivity (>= 95 mol %) toward alkenes at high conversion levels (>= 94 mol %). Moreover, they displayed significant stability after five catalytic cycles with minimal leaching and highly competitive values of alkyne productivity in the semihydrogenation of phenylacetylene. The study also explored the potential of these catalysts in continuous gas-phase reactions, where PdCo-QT demonstrated remarkable catalytic activity and selectivity with a high gas hourly space velocity., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, TED2021-130191B-C41, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. The Italian Ministry of University and Research (MUR) is also thanked for PRIN-PNRR 2022 project "P2022XKWH7-CircularWaste" and PRIN P20223ARWAY-REWIND. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Eduardo Villalobos, Carlos Escudero, and Carlo Marini). A. Yuste Rodrigo is acknowledged for experimental contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • del Río-Rodríguez, José Luis
  • Gutiérrez Tarriño, Silvia
  • Chinchilla Reyes, Lidia Esther
  • Holgado, Juan Pedro
  • Villar García, Ignacio J.
  • Pérez Dieste, Virginia
  • Calvino Gámez, José Juan
  • Oña Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

MOF-Derived PdCo and PdMn Systems as Versatile Catalysts in Alkyne Semihydrogenation

  • Martínez, Jordán Santiago
  • Carpisassi, Luigi
  • Egea, Gonzalo
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Mora Moreno, Carmen
  • Trasobares Llorente, Susana
  • Vaccaro, Luigi
  • Calvino Gámez, José Juan
  • Agostini, Giovanni
  • Oña Burgos, Pascual
This study investigates the structure and catalytic properties of bimetallic nanocomposites derived from PdCo- and PdMn-based metal-organic frameworks. These materials, synthesized via chemical (Q) and thermal treatments (T), resulted in PdCo-QT and PdMn-QT catalysts containing Pd-based nanoparticles modified with Co or Mn and supported on N-doped carbon. Detailed characterization techniques confirm these complex structures, including high-resolution transmission electron microscopy, scanning transmission electron microscopy energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The catalytic performances of these materials were evaluated for the selective semihydrogenation of phenylacetylene and 4-octyne under soft conditions (1 H2 bar, room temperature) in batch reactors, demonstrating very high selectivity (≥95 mol %) toward alkenes at high conversion levels (≥94 mol %). Moreover, they displayed significant stability after five catalytic cycles with minimal leaching and highly competitive values of alkyne productivity in the semihydrogenation of phenylacetylene. The study also explored the potential of these catalysts in continuous gas-phase reactions, where PdCo-QT demonstrated remarkable catalytic activity and selectivity with a high gas hourly space velocity.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, J. S.
  • Mazarío, J.
  • Lopes, C. W.
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
  • Agostini, Giovanni
  • Oña Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernández-Salvador, Sergio
  • del Río-Rodríguez, Jose Luis
  • Montiel, Miguel A.
  • Molina, M. Asunción
  • Gutiérrez-Tarriño, Silvia
  • Calvente, Juan José
  • Beale, Andrew M.
  • Oña-Burgos, Pascual
  • Solla-Gullón, José
  • Olloqui-Sariego, José Luis
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol−1), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A High Pressure Operando Spectroscopy Examination of Bimetal Interactions in ‘Metal Efficient’ Palladium/In2O3/Al2O3 Catalysts for CO2 Hydrogenation

  • Potter, Matthew E.
  • Mediavilla Madrigal, Sofia
  • Campbell, Emma
  • Allen, Lisa J.
  • Vyas, Urvashi
  • Parry, Stephen
  • García-Zaragoza, Adrián
  • Martínez-Prieto, Luis M.
  • Oña-Burgos, Pascual
  • Lützen, Mads
  • Damsgaard, Christian D.
  • Rodríguez-Castellón, Enrique
  • Schiaroli, Nicola
  • Fornasari, Giuseppe
  • Benito, Patricia
  • Beale, Andrew M.
CO2 hydrogenation to methanol has the potential to serve as a sustainable route to a wide variety of hydrocarbons, fuels and plastics in the quest for net zero. Synergistic Pd/In2O3 (Palldium on Indium Oxide) catalysts show high CO2 conversion and methanol selectivity, enhancing methanol yield. The identity of the optimal active site for this reaction is unclear, either as a Pd−In alloy, proximate metals, or distinct sites. In this work, we demonstrate that metal-efficient Pd/In2O3 species dispersed on Al2O3 can match the performance of pure Pd/In2O3 systems. Further, we follow the evolution of both Pd and In sites, and surface species, under operando reaction conditions using X-ray Absorption Spectroscpy (XAS) and infrared (IR) spectroscopy. In doing so, we can determine both the nature of the active sites and the influence on the catalytic mechanism., UK Catalysis Hub is kindly thanked for resources and support provided via the membership of the UK Catalysis Hub Consortium and funded by current EPSRC grants: EP/ R026939/1 and EP/R026815/1. We thank Diamond Light Source for provision of beam time and support facilities at the beamline B18, under proposal SP30647. We also acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and we would like to thank Dragos Stoian, Kenneth Marshall, Wouter van Beek and Naomi Lawes for assistance and support in using beamline BM31. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101022507. This work was supported by a research grant (9455) from VILLUM FONDEN. ERC and PBM wish to thanks the Spanish Ministry of Science and Innovation, for projects PID2021-126235OB-C32 and TED2021-130756B C31 funded by MCIN/AEIMCIN/AEI/10.13039/ 501100011033 and FEDER funds, and by “ERDF A way of making Europe, repectively”. We thank Elena Rodríguez Aguado for performing XPS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural transformation of carbon-encapsulated core-shell CoNi nanoparticles during magnetically induced CO<inf>2</inf> reduction into CO

  • Cerezo-Navarrete, Christian
  • Marin, Irene Mustieles
  • Marini, Carlo
  • Chaudret, Bruno
  • Martínez-Prieto, Luis M.
Controlling product distribution in CO2 hydrogenation is of great scientific interest, the selective CO production through the reverse water-gas shift reaction (RWGS) being one of the most investigated processes. Herein, we report the synthesis of new core-shell Co@Ni NPs encapsulated in carbon (Co@Ni@C) to prevent their aggregation at the high-temperatures reached during magnetically induced catalysis. This bifunctional system has been simultaneously used as heating agent and catalyst for the magnetically induced hydrogenation of CO2. While at low magnetic fields Co@Ni@C produces CH4:CO mixtures, at higher field amplitudes it selectively generates carbon monoxide. Indeed, Co@Ni@C has shown to be one of the most active catalysts reported to date, which reaches a maximum conversion of 74.2% with complete selectivity towards CO at 53 mT and 300 kHz. In addition, recycling and cyclability experiments have demonstrated that Co@Ni@C becomes fully selective for CO after being exposed to high field amplitudes (i.e. reaction temperature above 500 °C), even when it exposed to low magnetic fields again. This change in the selectivity is due to an atomic rearrangement of the core-shell structure, as was confirmed by EDX, XAS, TPR and TPD analysis., The authors thank Instituto de Tecnología Química (ITQ), Instituto de Investigaciones Químicas (IIQ), Consejo Superior de Investigaciones Científicas (CSIC), Universitat Politècnica de València (UPV) and Universidad de Sevilla (US) for the facilities. We also thank the Electron Microscopy Service of the UPV for TEM analysis. The authors also acknowledge European Union's Horizon 2020 research and innovation program H2020-LC-SC3-2020 (LAURELIN; nº: 101022507), Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación (PID2021-126080OA-I00, TED2021-132087A-I00 and RYC2020-030031-I), Junta de Andalucía (ProyExcel_00706) and University of Seville (VI PP A.TALENTO; 2022/00000400) for financial support. We gratefully acknowledge Dr. Raf Roelant for his help with thermodynamic equilibrium calculations. C. Cerezo-Navarrete thanks Generalitat Valenciana Predoctoral Fellowship (GVA: ACIF/2019/076)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A High Pressure Operando Spectroscopy Examination of Bimetal Interactions in ‘Metal Efficient’ Palladium/In2O3/Al2O3 Catalysts for CO2 Hydrogenation

  • Potter, Matthew E.
  • Mediavilla Madrigal, Sofia
  • Campbell, Emma
  • Allen, Lisa J.
  • Vyas, Urvashi
  • Parry, Stephen
  • García-Zaragova, Adrián
  • Martínez-Prieto, Luis Miguel
  • Oña-Burgos, Pascual
  • Lützen, Mads
  • Damsgaard, Christian D.
  • Rodríguez-Castellón, Enrique
  • Schiaroli, Nicola
  • Fornasari, Giuseppe
  • Benito, Patricia
  • Beale, Andrew M.
CO hydrogenation to methanol has the potential to serve as a sustainable route to a wide variety of hydrocarbons, fuels and plastics in the quest for net zero. Synergistic Pd/InO (Palldium on Indium Oxide) catalysts show high CO conversion and methanol selectivity, enhancing methanol yield. The identity of the optimal active site for this reaction is unclear, either as a Pd−In alloy, proximate metals, or distinct sites. In this work, we demonstrate that metal-efficient Pd/InO species dispersed on AlO can match the performance of pure Pd/InO systems. Further, we follow the evolution of both Pd and In sites, and surface species, under operando reaction conditions using X-ray Absorption Spectroscpy (XAS) and infrared (IR) spectroscopy. In doing so, we can determine both the nature of the active sites and the influence on the catalytic mechanism., UK Catalysis Hub is kindly thanked for resources and support provided via the membership of the UK Catalysis Hub Consortium and funded by current EPSRC grants: EP/R026939/1 and EP/R026815/1. We thank Diamond Light Source for provision of beam time and support facilities at the beamline B18, under proposal SP30647. We also acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and we would like to thank Dragos Stoian, Kenneth Marshall, Wouter van Beek and Naomi Lawes for assistance and support in using beamline BM31. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. This work was supported by a research grant (9455) from VILLUM FONDEN. ERC and PBM wish to thanks the Spanish Ministry of Science and Innovation, for projects PID2021-126235OB-C32 and TED2021-130756B-C31 funded by MCIN/AEIMCIN/AEI/10.13039/501100011033 and FEDER funds, and by “ERDF A way of making Europe, repectively”. We thank Elena Rodríguez Aguado for performing XPS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Concise Diastereoselective Total Synthesis of α-Ambrinol

  • López-Martínez, Josefa L.
  • Torres-García, Irene
  • Moreno-Gutiérrez, Irene
  • Oña-Burgos, Pascual
  • Rosales Martínez, Antonio
  • Muñoz-Dorado, Manuel
  • Álvarez-Corral, Miriam
  • Rodríguez-García, Ignacio
(−)-cis-α-Ambrinol is a natural product present in ambergris, a substance of marine origin that has been highly valued by perfumers. In this paper, we present a new approach to its total synthesis. The starting material is commercially available α-ionone and the key step is an intramolecular Barbier-type cyclization induced by CpTiCl, an organometallic compound prepared in situ by a CpTiCl reduction with Mn., This work was supported by the University of Almería and Junta de Andalucía (Conserjería de Transformación Económica, Industria, Conocimiento y Universidades) and Fondo Europeo de Desarrollo Regional (FEDER) for the Projects UALFEDER 2020-FQM-B1989, project PY20_01027 and project CEIA3 PYC20 RE 060 UAL, and also for the Horizon 2020-Research and Innovation Framework Programme of the European Commission for the project 101022507 LAURELIN and also by the University of Seville, through the Vicerrectorado de Investigación (Projects 2020/00001014 and 2021/00000422: Ayudas a Consolidación de Grupos de la Junta de Andalucía and Project Politec-Biomat: Red de Biomateriales en la Universidad de Sevilla)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural transformation of carbon-encapsulated core-shell CoNi nanoparticles during magnetically induced CO2 reduction into CO

  • Cerezo-Navarrete, Christian
  • Mustieles Marin, Irene
  • Marini, Carlo
  • Chaudret, Bruno
  • Martínez-Prieto, Luis M.
Controlling product distribution in CO hydrogenation is of great scientific interest, the selective CO production through the reverse water-gas shift reaction (RWGS) being one of the most investigated processes. Herein, we report the synthesis of new core-shell Co@Ni NPs encapsulated in carbon (Co@Ni@C) to prevent their aggregation at the high-temperatures reached during magnetically induced catalysis. This bifunctional system has been simultaneously used as heating agent and catalyst for the magnetically induced hydrogenation of CO. While at low magnetic fields Co@Ni@C produces CH:CO mixtures, at higher field amplitudes it selectively generates carbon monoxide. Indeed, Co@Ni@C has shown to be one of the most active catalysts reported to date, which reaches a maximum conversion of 74.2% with complete selectivity towards CO at 53 mT and 300 kHz. In addition, recycling and cyclability experiments have demonstrated that Co@Ni@C becomes fully selective for CO after being exposed to high field amplitudes (i.e. reaction temperature above 500 °C), even when it exposed to low magnetic fields again. This change in the selectivity is due to an atomic rearrangement of the core-shell structure, as was confirmed by EDX, XAS, TPR and TPD analysis., The authors thank Instituto de Tecnología Química (ITQ), Instituto de Investigaciones Químicas (IIQ), Consejo Superior de Investigaciones Científicas (CSIC), Universitat Politècnica de València (UPV) and Universidad de Sevilla (US) for the facilities. We also thank the Electron Microscopy Service of the UPV for TEM analysis. The authors also acknowledge European Union's Horizon 2020 research and innovation program H2020-LC-SC3-2020 (LAURELIN; nº: 101022507), Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación (PID2021-126080OA-I00, TED2021-132087A-I00 and RYC2020-030031-I), Junta de Andalucía (ProyExcel_00706) and University of Seville (VI PP A.TALENTO; 2022/00000400) for financial support. We gratefully acknowledge Dr. Raf Roelant for his help with thermodynamic equilibrium calculations. C. Cerezo-Navarrete thanks Generalitat Valenciana Predoctoral Fellowship (GVA: ACIF/2019/076).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan
  • Mazarío, Jaime
  • Lopes, Christian W.
  • Trasobares, Susana
  • Calvino Gamez, Jose Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Chinchilla, Lidia E
  • Holgado, Juan Pedro
  • Villar-García, Ignacio J
  • Pérez-Dieste, Virginia
  • Calvino, Jose J
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water-Gas Shift under Magnetic Induction Heating

  • García-Zaragoza, Adrián
  • Del Río-Rodríguez, José Luis
  • Cerezo-Navarrete, Christian
  • Gutiérrez-Tarriño, Silvia
  • Molina, M Asunción
  • Costley-Wood, Lucy
  • Mazarío, Jaime
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
  • Beale, Andrew M.
  • Oña-Burgos, Pascual
Reducing CO2 to CO via the reverse water-gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods., The authors thank the financial support from the European Union’s Horizon 2020 research and innovation program under grant agreement No 101022507. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00, PID2021-126080OA-I00, TED2021-130191B–C41, TED2021-132087A-I00 and CNS2023-145078 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2022/10), and Junta de Andalucia (ProyExcel_00706). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.L.R.-R. thanks to the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Unversitat Politècnica de València for her postdoctoral contract PAID-10-23. J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnología Química (ITQ), Consejo Superior de Investigaciones Científicas (CSIC) and Universitat Politècnica de València (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO. The authors would also like to thank ALBA synchrotron for provision of beamtime 2023097780 on NOTOS beamline, and beamline scientist Eduardo Villalobos. Also, Diamond Light Source for measurements via Block Allocation Group Access on B18 during beamtime SP34632-4. The UK Catalysis Hub is kindly thanked for resources and support provided during these B18 measurements, via UCL’s membership of the UK Catalysis Hub Consortium funded by EPSRC grant EP/R026939/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzyme-like Enantioselectivity in GTM Chiral Zeolite Catalysts upon Preactivation of Ge Sites

  • Serna Valdés, Ramón de la
  • Jurado Sánchez, Jaime
  • Márquez Álvarez, Carlos
  • Molina Esquinas, Asunción
  • Costley-Wood, Lucy
  • Beale, Andrew M
  • Gianolio, Diego
  • Pérez-Pariente, Joaquín
  • Gómez-Hortigüela Sainz, Luis
Extra-large-pore Ge-containing GTM chiral zeolite catalysts have recently proved useful asymmetric catalysts, with chirality emerging from their chiral confined nanospace. However, so far these exceptional materials have suffered from low framework stability in the presence of water and moderate catalytic enantioselectivity in the ring-opening of chiral trans-stilbene oxide with 1-butanol used as a test reaction. Here, we report that these chiral zeolite catalysts can be easily stabilized upon exposure of the calcined material to 1-butanol, providing stability against water and, most importantly, prompting a preactivation of the chiral active sites that boosts their enantioselective properties, reaching unprecedented enantiomeric excesses up to 88% where one enantiomer reacts 16 times more than the other. A range of physicochemical studies, including in situ Fourier transform infrared (FTIR) and X-ray absorption spectroscopy, indicates that framework Ge sites increase their coordination environment upon interaction with 1-butanol molecules, which after a thermal treatment above 100 °C remain irreversibly bound to Ge as a consequence of a condensation and dehydration reaction, providing a route to easily functionalize these materials. These preactivated GTM asymmetric catalysts act similarly to enzymes by controlling the confinement of the chiral reactants in particular orientations through coordination with Ge and development of H-bonds with nearby hydroxyl groups, thus attaining enantioselective catalytic activities close to those reached by enzymatic systems but with the crucial advantage associated with heterogeneous catalysts and, notably, the possibility of preparing both enantiomeric versions of the catalyst by using an easily accessible alkaloid., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI, MCIN/AEI/10.13039/501100011033) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project PID2022-138481NB-I00. RS acknowledges MCIN for predoctoral grant (PRE2020-095946). This work is also part of the Project PDC2022-133681-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. We acknowledge Centro Técnico de Informática (CSIC) for running the calculations. The authors thank Diamond Light Source, particularly the B18 beamline team, for their support during the XAS measurements (proposal SP38597-1). The UCL team also acknowledges financial support from the Laurelin project (European Union’s Horizon 2020 - Reference: 101022507)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • Río Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Cerezo-Navarrete, Christian
  • Beale, Andrew M.
  • Morales, María Del Puerto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual
A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by “Ayuda a Primeros Proyectos de Investigación (PAID-06-24).” J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 – Reference: 101022507) for PDRA contract at UCL., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed