Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Chemistry of Spinel Ferrite Nanoparticle Nucleation, Crystallization, and Growth

  • Andersen, Henrik L.
  • Granados-Miralles, Cecilia
  • Jensen, K.M.I.
  • Saura-Múzquiz, M.
  • Christensen, M.
The nucleation, crystallization, and growth mechanisms of MnFe2O4, CoFe2O4, NiFe2O4, and ZnFe2O4 nanocrystallites prepared from coprecipitated transition metal (TM) hydroxide precursors treated at sub-, near-, and supercritical hydrothermal conditions have been studied by in situ X-ray total scattering (TS) with pair distribution function (PDF) analysis, and in situ synchrotron powder X-ray diffraction (PXRD) with Rietveld analysis. The in situ TS experiments were carried out on 0.6 M TM hydroxide precursors prepared from aqueous metal chloride solutions using 24.5% NH4OH as the precipitating base. The PDF analysis reveals equivalent nucleation processes for the four spinel ferrite compounds under the studied hydrothermal conditions, where the TMs form edge-sharing octahedrally coordinated hydroxide units (monomers/dimers and in some cases trimers) in the aqueous precursor, which upon hydrothermal treatment nucleate through linking by tetrahedrally coordinated TMs. The in situ PXRD experiments were carried out on 1.2 M TM hydroxide precursors prepared from aqueous metal nitrate solutions using 16 M NaOH as the precipitating base. The crystallization and growth of the nanocrystallites were found to progress via different processes depending on the specific TMs and synthesis temperatures. The PXRD data show that MnFe2O4 and CoFe2O4 nanocrystallites rapidly grow (typically <1 min) to equilibrium sizes of 20-25 nm and 10-12 nm, respectively, regardless of applied temperature in the 170-420 °C range, indicating limited possibility of targeted size control. However, varying the reaction time (0-30 min) and temperature (150-400 °C) allows different sizes to be obtained for NiFe2O4 (3-30 nm) and ZnFe2O4 (3-12 nm) nanocrystallites. The mechanisms controlling the crystallization and growth (nucleation, growth by diffusion, Ostwald ripening, etc.) were examined by qualitative analysis of the evolution in refined scale factor (proportional to extent of crystallization) and mean crystallite volume (proportional to extent of growth). Interestingly, lower kinetic barriers are observed for the formation of the mixed spinels (MnFe2O4 and CoFe2O4) compared to the inverse (NiFe2O4) and normal (ZnFe2O4) spinel structured compounds, suggesting that the energy barrier for formation may be lowered when the TMs have no site preference. © 2024 The Authors. Published by American Chemical Society., The authors are grateful for the obtained beamtimes at beamline I711, MAXlab synchrotron radiation source, Lund University, Sweden; and beamline P02.1, PETRA III, DESY, Hamburg, Germany (ref. I-20150335 EC). Hanns-Peter Liermann, Jozef Bednarcik, Ann-Christin Dippel, Carsten Gundlach, Dorthe Haase, Diana Thomas, and Francisco Martinez are thanked for their support during the respective beamtimes. This work was financially supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93), Innovation Fund Denmark (Green Chemistry for Advanced Materials, GCAM-4107-00008B), Independent Research Fund Denmark (Small and Smart Magnet Design) and the Danish Center for Synchrotron and Neutron Science (DanScatt), The Spanish Ministry of Universities (Ministerio de Universidades) and the European UnionyNextGenerationEU through a Maria Zambrano attraction of international talent fellowship grant, and Comunidad de Madrid, Spain, through an "Atraccion de Talento Investigador" fellowship (2020-T2/IND-20581). This project has received funding from the European Union's Horizon Europe research and innovation programme under project No. 101063369 (OXYPOW). C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". C.G.-M. and M.S.-M. also acknowledge support from the Spanish Ministry of Science and Innovation through Grant TED2021-130957B-C51 and TED2021-130957B-C52 (NANOBOND) funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged., Supporting Information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystal/magnetic structure and cation inversion in hydrothermally synthesized MnFe2O4, CoFe2O4, NiFe2O4, and ZnFe2O4 nanoparticles: a neutron powder diffraction study

  • Andersen, Henrik L.
  • Saura-Múzquiz, M.
  • Granados-Miralles, Cecilia
  • Klemmt, R.
  • Bøjesen, E.D.
  • Christensen, M.
The crystal and magnetic structures of MnFe2O4, CoFe2O4, NiFe2O4 and ZnFe2O4 nanocrystallites are reported based on joint structural modelling of powder X-ray diffraction and neutron powder diffraction data. The nanoparticle samples were prepared using equivalent precursor preparation routes (co-precipitation of transition metal hydroxides using NH4OH) and identical hydrothermal synthesis conditions (steel autoclave, 200 °C, 1 hour), allowing the isolated effect of the divalent cation to be evaluated. The study uncovers how variations in cation site preferences, spinel inversion degree, and crystallite size, which are challenging to discern using conventional characterization techniques, distinctly influence the magnetic structures. Diffraction peak profile analysis and scanning transmission electron microscopy images show how MnFe2O4 forms the largest crystallites (17.13(2) nm), followed by NiFe2O4 (10.31(1) nm) and CoFe2O4 (7.92(1) nm), while ZnFe2O4 forms ultrafine nanoparticles of only 3.70(1) nm. The transition metal ions have different affinities for the tetrahedral and octahedral crystallographic sites as evident from the obtained spinel inversion degrees, x, [M2+1−xFe3+x]tet[M2+xFe3+2−x]octO4. The MnFe2O4 and CoFe2O4 nanocrystallites exhibit mixed/semi-inverse spinel structures with x = 0.87(3) and 0.954(6), respectively, while NiFe2O4 is fully inverse (x = 1.00) and ZnFe2O4 is closer to a normal spinel (x = 0.138(4)). The combination of neutron diffraction and magnetic measurements illustrates how cation identity impacts site occupancy, crystallite size, and magnetization, providing new insights into the design of ferrite-based nanomaterials for magnetic applications., The authors are grateful for the obtained beamtime at the Cold Neutron Powder Diffractometer (DMC) instrument at the Swiss Spallation Neutron Source (SINQ), Paul Scherrer Institute (PSI), Villigen, Switzerland. Lukas Keller and Emmanuel Canévet are thanked for their support during the beamtime. This work was financially supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93), Innovation Fund Denmark (Green Chemistry for Advanced Materials, GCAM-4107-00008B), Independent Research Fund Denmark (Small and Smart Magnet Design), Danish Center for Synchrotron and Neutron Science (DanScatt), and Comunidad de Madrid, Spain, through an “Atracción de Talento Investigador” fellowship (2020-T2/IND-20581). C. G.-M. acknowledges financial support from grant RYC2021–031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. This project has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No 101063369 (OXYPOW) and No 101109595 (MAGWIRE). Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged. EDB and RK acknowledge funding from the Carlsberg Foundation (CF18-0705), Aarhus University Centre for Integrated Materials Research and the Interdisciplinary Nanoscience Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cation disorder and lithium conductivity in mechanochemically synthesized chloride solid electrolytes

  • Artal, Raül
  • Andersen, Henrik Lyder
  • Olmo, Rafael del
  • Villaluenga, Irune
  • Sobrados, Isabel
  • Díez-Gómez, Virginia
  • Gainza, Javier
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
  • Jiménez, Ricardo
  • Aguadero, Ainara
This article is part of a Special issue entitled: ‘Solid State Ionics 100’ published in Solid State Ionics, Developing fast, stable, and scalable Li conductors is crucial for advancing all-solid-state batteries (ASSBs). Here, we present a rapid, one-hour mechanochemical synthesis of chloride electrolytes Li2BxCl4 (B = Zn, Mg, Zr and x = 1 and 2/3) via high-energy ball milling (HEBM), achieving the targeted spinel phase without the need for any annealing steps. In Li2ZnCl4 electrochemical impedance spectroscopy reveals an unexpected, reversible low-temperature ionic transition at ∼75 °C, leading to a dramatic increase in total Li+ conductivity, from 2.95·10−9 S·cm−1 at 25 °C to an extrapolated room temperature conductivity of 3.24·10−5 S·cm−1 following heating to 125 °C. To elucidate the structural origins of this transition, we employ neutron powder diffraction (NPD), variable-temperature powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), and 6Li MAS NMR spectroscopy. We explore the stabilization of the high conducting phase via the introduction of host cation vacancies and therefore increasing the Li/B ratio based on the spinel-related compounds, Li2Zn1/3Zr1/3Cl4 and Li2Mg1/3Zr1/3Cl4, synthesized via the same one-hour mechanochemical approach. Rietveld refinement of NPD data reveals a monoclinic lattice distortion and cation disorder in both compounds, which open new Li conduction pathways. In both materials, 2–4 orders of magnitude increase of conductivity is achieved by aliovalent Zr4+-substitution compared to the undoped counterparts Li2ZnCl4 and Li2MgCl4, leading to maximum bulk conductivities up to 10−4 S·cm−1 at room temperature. Notably, the investigated chloride-based solid electrolytes consist of non-critical elements and exhibit high thermal stability up to at least 190 °C which can be key for easy scalable processing. These results highlight the potential of spinel-based chloride electrolytes as candidates for next-generation solid-state battery applications, combining rapid and scalable synthesis with promising ionic transport properties., The authors acknowledge financial support from the Spanish Ministry of Science, Agencia Estatatal de Investigacion (TED2021-149254B-C22). This work has received financial support from the European Union's Horizon Europe Research and Innovation Programme under Grant 101069726 (SEATBELT project). This project has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No 101063369 (OXYPOW). We also gratefully acknowledge the Institut Laue-Langevin for time on the D2B beamline under Proposal 5-24-730., Peer reviewed