Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystal/magnetic structure and cation inversion in hydrothermally synthesized MnFe2O4, CoFe2O4, NiFe2O4, and ZnFe2O4 nanoparticles: a neutron powder diffraction study

  • Andersen, Henrik L.
  • Saura-Múzquiz, M.
  • Granados-Miralles, Cecilia
  • Klemmt, R.
  • Bøjesen, E.D.
  • Christensen, M.
The crystal and magnetic structures of MnFe2O4, CoFe2O4, NiFe2O4 and ZnFe2O4 nanocrystallites are reported based on joint structural modelling of powder X-ray diffraction and neutron powder diffraction data. The nanoparticle samples were prepared using equivalent precursor preparation routes (co-precipitation of transition metal hydroxides using NH4OH) and identical hydrothermal synthesis conditions (steel autoclave, 200 °C, 1 hour), allowing the isolated effect of the divalent cation to be evaluated. The study uncovers how variations in cation site preferences, spinel inversion degree, and crystallite size, which are challenging to discern using conventional characterization techniques, distinctly influence the magnetic structures. Diffraction peak profile analysis and scanning transmission electron microscopy images show how MnFe2O4 forms the largest crystallites (17.13(2) nm), followed by NiFe2O4 (10.31(1) nm) and CoFe2O4 (7.92(1) nm), while ZnFe2O4 forms ultrafine nanoparticles of only 3.70(1) nm. The transition metal ions have different affinities for the tetrahedral and octahedral crystallographic sites as evident from the obtained spinel inversion degrees, x, [M2+1−xFe3+x]tet[M2+xFe3+2−x]octO4. The MnFe2O4 and CoFe2O4 nanocrystallites exhibit mixed/semi-inverse spinel structures with x = 0.87(3) and 0.954(6), respectively, while NiFe2O4 is fully inverse (x = 1.00) and ZnFe2O4 is closer to a normal spinel (x = 0.138(4)). The combination of neutron diffraction and magnetic measurements illustrates how cation identity impacts site occupancy, crystallite size, and magnetization, providing new insights into the design of ferrite-based nanomaterials for magnetic applications., The authors are grateful for the obtained beamtime at the Cold Neutron Powder Diffractometer (DMC) instrument at the Swiss Spallation Neutron Source (SINQ), Paul Scherrer Institute (PSI), Villigen, Switzerland. Lukas Keller and Emmanuel Canévet are thanked for their support during the beamtime. This work was financially supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93), Innovation Fund Denmark (Green Chemistry for Advanced Materials, GCAM-4107-00008B), Independent Research Fund Denmark (Small and Smart Magnet Design), Danish Center for Synchrotron and Neutron Science (DanScatt), and Comunidad de Madrid, Spain, through an “Atracción de Talento Investigador” fellowship (2020-T2/IND-20581). C. G.-M. acknowledges financial support from grant RYC2021–031181-I funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. This project has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No 101063369 (OXYPOW) and No 101109595 (MAGWIRE). Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged. EDB and RK acknowledge funding from the Carlsberg Foundation (CF18-0705), Aarhus University Centre for Integrated Materials Research and the Interdisciplinary Nanoscience Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomistic Mechanisms Triggered by Joule Heating Effects in Metallic Cu-Bi Nanowires for Spintronics

  • Guedeja-Marrón, A.
  • Ignacio Beltrán, J.
  • Saura-Múzquiz, M.
  • Perna, P.
  • Muñoz, M. Carmen
  • Pérez, L.
  • Varela, M.
Joule heating may severely impact the response to electric current injection of nanomaterials for spintronics. Here, the effects of heating in Bi doped Cu nanowires, a system where 1% Bi doping promotes a giant spin Hall effect (SHE), are studied by in situ high resolution electron microscopy. High quality Bi-Cu nanowires are grown by room temperature electrodeposition. The large size of Bi cations precludes insertion into the dense Cu face-centered lattice. Still, homogeneous compositions up to a nominal 7% Bi are successfully obtained with thicknesses <100 nm and grain sizes in the micron longitudinal scale, coated by a native oxide. In situ injection of current promotes fast Bi segregation out of solution. Controlled in situ annealing shows that the onset for segregation starts above temperatures of 250 °C. Within minutes, Bi atoms diffuse to grain boundaries or to exposed surfaces, such as the nanowire tips. Monoatomic thick Bi ordered decorations appear, preferentially on surface planes of the (Formula presented.) type. Annealing at 400 °C promotes the growth of pure Bi nanocrystals, coherent with the underlying Cu matrix. Still, the intra-grain Bi concentration remains finite at values near 1%. Density-functional theory calculations show that small amounts of Bi atoms are stable as substitutional impurities, confirming the potential of this system as building block for future spintronic devices. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Financial support from Ministerio de Ciencia, Innovación y Universidades of Spain via grants # PID2021-122980OB-C51, PID2021-122980OB-C52, TED2021-129254B-C21, SpinRed2 RED2022-134649-T and fromComunidad de Madrid via grants MAD2D-UCM3 and TEC-2024/TEC-380 (Mag4TIC-CM) is acknowledged. Fruitful discussions with MartaD. Rossell on monoatomic Bi decorations are acknowledged. Elec-tron microscopy observations carried out at Centro Nacional de Mi-croscopía Electrónica, ICTS ELECMI, Madrid (Spain). This project hasreceived funding from the European Union under the Horizon Eu-rope Marie SkłodowskaCurie Actions under project No. 101109595(MAGWIRE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlating Synthesis, Structure, and Thermal Stability of CuBi Nanowires for Spintronic Applications by Electron Microscopy and in Situ Scattering Methods

  • Guedeja-Marrón, A.
  • Andersen, Henrik L.
  • Sánchez-Santolino, G.
  • Zeng, L.
  • Ranjan, A.
  • García-Manuz, I.
  • Fauth, F.
  • Dejoie, C.
  • Olsson, E.
  • Perna, P.
  • Varela, M.
  • Pérez, L.
  • Saura-Múzquiz, M.
Bi-doped copper (Cu1–xBix) nanowires (NWs), promising candidates for spintronic applications due to their potential for a giant spin Hall effect (SHE), were synthesized, and their structural properties and thermal stability were investigated. Using template-assisted electrodeposition, Cu1–xBix nanowires with varying bismuth (Bi) content (x = 0, 2, 4, and 7%) and different crystalline domain sizes were fabricated. Structural analysis by advanced electron microscopy and X-ray scattering techniques revealed the influence of synthesis conditions on the resulting NW crystal structure and microstructure, including Bi localization (within the lattice or in the grain boundaries), crystallite domain dimensions, and lattice distortions. While NWs with larger crystalline domains allow homogeneous Bi incorporation into the Cu lattice, NWs with smaller crystalline domains exhibit noticeable Bi accumulation at grain boundaries. The thermal stability of the NWs was examined using variable temperature X-ray diffraction and total scattering. Upon heating, lattice distortions consistent with Bi diffusion out of the Cu lattice were observed, with subsequent crystallization of rhombohedral metallic Bi upon cooling. Microstructural analysis of NWs post heating shows that the recrystallized rhombohedral Bi accumulates in localized regions within the NWs, most likely corresponding to grain boundaries. In some cases, the exsolution of Bi from these regions leads to wedge-shaped fractures in the NWs and the formation of independent Bi particles. These findings establish a foundation for optimizing the SHE performance of Cu1–xBix nanowires for spintronic devices by correlating synthesis parameters with microstructural features and thermal behavior. © 2025 The Authors. Published by American Chemical Society, This project has received funding from the European Union under the Horizon Europe Marie Skłodowska-Curie Actions under project no. 101109595 (MAGWIRE) and project no. 101063369 (OXYPOW). Financial support from the Spanish MCIN/AEI, Spain/10.13039/501100011033 (grants PID2021-122980OB-C51, PID2021-122980OB-C52, TED2021-131323B-I00, PID2020-117024GB-C43, and CNS2022-136143) and Comunidad de Madrid (TEC-2024/TEC-380 (Mag4TIC-CM), MAD2D-CM-UCM3 and MAD2D-CM-UAM) is acknowledged. A.G-M. and I.G-M. acknowledge support from MINECO through grants RTI2018-097895-B-C43 and PRE2021-098702, respectively. H.L.A. acknowledges financial support from grant RYC2023-045465-I funded by MICIU/AEI/10.13039/501100011033. G.S.-S. acknowledges financial support from grant RYC2022-038027-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. We acknowledge the node Centro Nacional de Microscopía Electronica (CNME) of ICTS “ELECMI” at Universidad Complutense de Madrid and Chalmers Material Analysis Laboratory (CMAL) at Chalmers University of Technology for the electron microscopy observations. Swedish Research Council and Swedish Foundation for Strategic Research are acknowledged for access to ARTEMI, the Swedish National Infrastructure in Advanced Electron Microscopy (2021-00171 and RIF21-0026). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities under proposal number MA-5440 and CH-6713, and we thank Andy Fitch for assistance and support in using beamline ID22. Experiments were also performed under proposal ID2022035793 at BL04-MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff. We thank Dr. Antonio Santana-Otero for his assistance with the COMSOL Multiphysics software., Peer reviewed