Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomistic Mechanisms Triggered by Joule Heating Effects in Metallic Cu-Bi Nanowires for Spintronics

  • Guedeja-Marrón, A.
  • Ignacio Beltrán, J.
  • Saura-Múzquiz, M.
  • Perna, P.
  • Muñoz, M. Carmen
  • Pérez, L.
  • Varela, M.
Joule heating may severely impact the response to electric current injection of nanomaterials for spintronics. Here, the effects of heating in Bi doped Cu nanowires, a system where 1% Bi doping promotes a giant spin Hall effect (SHE), are studied by in situ high resolution electron microscopy. High quality Bi-Cu nanowires are grown by room temperature electrodeposition. The large size of Bi cations precludes insertion into the dense Cu face-centered lattice. Still, homogeneous compositions up to a nominal 7% Bi are successfully obtained with thicknesses <100 nm and grain sizes in the micron longitudinal scale, coated by a native oxide. In situ injection of current promotes fast Bi segregation out of solution. Controlled in situ annealing shows that the onset for segregation starts above temperatures of 250 °C. Within minutes, Bi atoms diffuse to grain boundaries or to exposed surfaces, such as the nanowire tips. Monoatomic thick Bi ordered decorations appear, preferentially on surface planes of the (Formula presented.) type. Annealing at 400 °C promotes the growth of pure Bi nanocrystals, coherent with the underlying Cu matrix. Still, the intra-grain Bi concentration remains finite at values near 1%. Density-functional theory calculations show that small amounts of Bi atoms are stable as substitutional impurities, confirming the potential of this system as building block for future spintronic devices. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Financial support from Ministerio de Ciencia, Innovación y Universidades of Spain via grants # PID2021-122980OB-C51, PID2021-122980OB-C52, TED2021-129254B-C21, SpinRed2 RED2022-134649-T and fromComunidad de Madrid via grants MAD2D-UCM3 and TEC-2024/TEC-380 (Mag4TIC-CM) is acknowledged. Fruitful discussions with MartaD. Rossell on monoatomic Bi decorations are acknowledged. Elec-tron microscopy observations carried out at Centro Nacional de Mi-croscopía Electrónica, ICTS ELECMI, Madrid (Spain). This project hasreceived funding from the European Union under the Horizon Eu-rope Marie SkłodowskaCurie Actions under project No. 101109595(MAGWIRE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlating Synthesis, Structure, and Thermal Stability of CuBi Nanowires for Spintronic Applications by Electron Microscopy and in Situ Scattering Methods

  • Guedeja-Marrón, A.
  • Andersen, Henrik L.
  • Sánchez-Santolino, G.
  • Zeng, L.
  • Ranjan, A.
  • García-Manuz, I.
  • Fauth, F.
  • Dejoie, C.
  • Olsson, E.
  • Perna, P.
  • Varela, M.
  • Pérez, L.
  • Saura-Múzquiz, M.
Bi-doped copper (Cu1–xBix) nanowires (NWs), promising candidates for spintronic applications due to their potential for a giant spin Hall effect (SHE), were synthesized, and their structural properties and thermal stability were investigated. Using template-assisted electrodeposition, Cu1–xBix nanowires with varying bismuth (Bi) content (x = 0, 2, 4, and 7%) and different crystalline domain sizes were fabricated. Structural analysis by advanced electron microscopy and X-ray scattering techniques revealed the influence of synthesis conditions on the resulting NW crystal structure and microstructure, including Bi localization (within the lattice or in the grain boundaries), crystallite domain dimensions, and lattice distortions. While NWs with larger crystalline domains allow homogeneous Bi incorporation into the Cu lattice, NWs with smaller crystalline domains exhibit noticeable Bi accumulation at grain boundaries. The thermal stability of the NWs was examined using variable temperature X-ray diffraction and total scattering. Upon heating, lattice distortions consistent with Bi diffusion out of the Cu lattice were observed, with subsequent crystallization of rhombohedral metallic Bi upon cooling. Microstructural analysis of NWs post heating shows that the recrystallized rhombohedral Bi accumulates in localized regions within the NWs, most likely corresponding to grain boundaries. In some cases, the exsolution of Bi from these regions leads to wedge-shaped fractures in the NWs and the formation of independent Bi particles. These findings establish a foundation for optimizing the SHE performance of Cu1–xBix nanowires for spintronic devices by correlating synthesis parameters with microstructural features and thermal behavior. © 2025 The Authors. Published by American Chemical Society, This project has received funding from the European Union under the Horizon Europe Marie Skłodowska-Curie Actions under project no. 101109595 (MAGWIRE) and project no. 101063369 (OXYPOW). Financial support from the Spanish MCIN/AEI, Spain/10.13039/501100011033 (grants PID2021-122980OB-C51, PID2021-122980OB-C52, TED2021-131323B-I00, PID2020-117024GB-C43, and CNS2022-136143) and Comunidad de Madrid (TEC-2024/TEC-380 (Mag4TIC-CM), MAD2D-CM-UCM3 and MAD2D-CM-UAM) is acknowledged. A.G-M. and I.G-M. acknowledge support from MINECO through grants RTI2018-097895-B-C43 and PRE2021-098702, respectively. H.L.A. acknowledges financial support from grant RYC2023-045465-I funded by MICIU/AEI/10.13039/501100011033. G.S.-S. acknowledges financial support from grant RYC2022-038027-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. We acknowledge the node Centro Nacional de Microscopía Electronica (CNME) of ICTS “ELECMI” at Universidad Complutense de Madrid and Chalmers Material Analysis Laboratory (CMAL) at Chalmers University of Technology for the electron microscopy observations. Swedish Research Council and Swedish Foundation for Strategic Research are acknowledged for access to ARTEMI, the Swedish National Infrastructure in Advanced Electron Microscopy (2021-00171 and RIF21-0026). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities under proposal number MA-5440 and CH-6713, and we thank Andy Fitch for assistance and support in using beamline ID22. Experiments were also performed under proposal ID2022035793 at BL04-MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff. We thank Dr. Antonio Santana-Otero for his assistance with the COMSOL Multiphysics software., Peer reviewed
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

In-vitro real-time magnetic recording of neuronal activity on spinal cord slices

  • Vera García, Arturo
  • Calaresu, Ivo
  • Martinez Ramirez, Isidoro|||0000-0002-5821-4840
  • Guerrero, Ruben|||0000-0003-2829-9377
  • Scaini, Denis|||0000-0001-8398-8074
  • Arana Schoebel, Guillermo de
  • Hernández Rueda, Jaime|||0000-0002-4368-2529
  • Rodríguez Fernández, Isabel|||0000-0002-7178-8275
  • Miranda Soriano, Rodolfo|||0000-0002-1064-6724
  • Martin, Eduardo Daniel|||0000-0003-1768-3488
  • Camarero de Diego, Julio|||0000-0003-0078-7280
  • González Pérez, María Teresa|||0000-0002-7253-797X
  • Pérez García, Lucas|||0000-0001-9470-7987
  • Ballerini, Laura|||0000-0001-8420-0787