Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Route to Ultra-Fast Amplitude-Only Spatial Light Modulation using Phase-Change Materials

  • Shields, Joe
  • Ruiz de Galarreta, Carlota
  • Penketh, Harry
  • Au, Yat Yin
  • Bertolotti, Jacopo
  • Wright, C. David
7 pags., 6 figs., A phase-change material based, thin-film, amplitude-only spatial light modulator is presented. The modulator operates in reflection and modulates the amplitude of light incident on its surface with no effect on optical phase when the phase-change material is switched between its amorphous and crystalline states. This is achieved using a thin-film device with an embedded, switchable, GeTe phase-change layer. Test modulation patterns are written to the device using laser scans, and the amplitude and phase response measured, using optical spectroscopy and off-axis digital holography. Experimental results reveal reflected intensity to be modulated by up to 38%, with an averaged phase difference of less than ≈π/50. Since phase-change materials such as GeTe can be switched on sub-microsecond timescales, this approach maps out a route for ultra-fast amplitude spatial light modulators with widespread applications in fields such as wavefront shaping, communications, sensing, and imaging., J.S. acknowledges funding from the EPSRC CDT in Metamaterials (EP/L015331/1). J.S., J.B., and C.D.W. acknowledge funding from the EPSRC A-META project (EP/W003341/1). C.R.G. acknowledges funding from the Marie Skłodowska-Curie Individual Fellowship 101068089 (METASCALE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Building Conventional Metasurfaces with Unconventional Interband Plasmonics: A Versatile Route for Sustainable Structural Color Generation Based on Bismuth

  • Chacón, Fernando
  • Ruiz de Galarreta, Carlota
  • Nieto-Pinero, Eva
  • García-Pardo, Marina
  • García-Tabares, Elisa
  • Ramos, Nicolás
  • Castillo, Miguel
  • López-García, Martín
  • Siegel, Jan
  • Toudert, Johann
  • Wright, C. David
  • Serna, Rosalía
9 pags., 7 figs. 1 tab., Plasmonic metasurfaces for structural color generation are typically built using the archetypal noble metals, gold, and silver. These possess plasmonic properties in the visible spectrum due to their inherent high free carrier densities. However, they are much more expensive compared to many other metals and exhibit several nanofabrication issues such as bad surface adhesion or thermally activated inter-diffusion. In this work, it is shown that interband plasmonic materials –whose optical properties are driven by interband transitions instead of free carriers— are appealing candidates for the fabrication of sustainable and cost-efficient metasurfaces for structural coloring. By using bismuth, an environment-friendly interband plasmonic material cheaper than gold and silver, nanodisks gap-plasmon metasurfaces and planar Fabry-Perot cavities are modeled and fabricated, which both successfully enable pure colors that can be robustly tailored upon suitable design. By direct experimental comparison between both types of design interms of color efficiency, fabrication complexity, and angular robustness; howbismuth-based gap surface plasmon metasurfaces can be excellent candidates for color microprinting is shown, whereas nanolayered BiFabry-Pérot cavities are ideal for macroscopic color coatings due to their easeof fabrication and implementation., C.R.de G. acknowledges funding from the Marie Sklodowska-Curie Individual Fellow-ship 101068089 (METASCALE) and from Margarita Salas/UniversidadAutónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Gen-eration EU” program of the EU. This work had been partly funded by the national research grants ULS_PSB (PID2020-112770RB-C21), AlPHOM-ENA (PID2021-123190OB-I00f), and (ASSESS TED2021-129666B-C22)from the Spanish Research Agency (AEI, Ministry of Research andInnovation)) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) y la Agencia Estatal de Investigación (AEI) MCIN/AEI/10.13039/501 100 011 033 and by “ERDF a way of making Europe”, and the“European Union NextGenerationEU/PRTR”. R.S. and F.C.-S. would like toacknowledge funding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical power-handling capabilities and temporal dynamics of reconfigurable phase-change metasurfaces

  • Braid, George
  • Ruiz de Galarreta, Carlota
  • Pady, Joe
  • Comley, Andrew
  • Bertolotti, Jacopo
  • Wright, C. David
Metasurfaces based on chalcogenide phase-change materials offer a highly promising route towards the realization of non-volatile reconfigurable metasurfaces. However, since their switching mechanism between amorphous and crystalline states is based on thermal stimuli, phase-change metasurfaces should be treated carefully when operating under high power laser sources, since optically induced heating could trigger unwanted state changes during their operation. In this work, therefore, we develop a thermodynamic model capable of tracking the crystallization, melting and reamorphization dynamics of phase-change optical metadevices, and so too their optical performance, when operating under (i.e., aiming to control) high power laser sources. Our model is used, by way of example, to ascertain the optical power-handling capabilties of two typical phase-change metasurface architectures, one for beam steering and one for active lensing., Funding is acknowledged from the EPSRC (grants EP/W022931/1, EP/W003341/1, EP/L015331/1). GB also acknowledges funding from AWE Ltd. CRdeG acknowledges funding from the EC MSCA Fellowship METASCALE (101068089)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reconfigurable, Temperature Resilient Phase-Change Metasurfaces Fabricated via High Throughput Nanoimprinting Lithography

  • Ruiz de Galarreta, Carlota de
  • Zhao, Yinghao
  • Mendoza Carreño, José
  • Caicedo, José M.
  • Santiso, José
  • Wright, C. David
  • Alonso Carmona, M. Isabel
  • Li, Jiafang
  • Mihi, Agustín
The combination of metasurfaces with chalcogenide phase-change materials is a highly promising route toward the development of multifunctional and reconfigurable nanophotonic devices. However, their transition into real-world devices is hindered by several technological challenges. This includes, amongst others, the lack of large area photonic architectures produced via scalable nanofabrication methods as required for free-space photonic applications, along with the ability to withstand the high temperatures needed for the phase-change process. In this work, we present a scalable nanofabrication strategy for the production of reconfigurable metasurfaces based on high-throughput, large-area nanoimprint lithography that is fully compatible with chalcogenide phase-change materials processing. Our approach involves the direct imprinting of high-melting-point, thermally stable TiO2 nanoparticle pastes, followed by the deposition of an Sb2Se3 thin film as the phase-change material active layer. The patterned TiO2 film enables the creation of thermally robust metasurfaces, overcoming the limitations of conventional polymer-based nanoimprinting techniques. The versatility of our approach is showcased by producing phase-change devices with two distinct functionalities: (i) metasurfaces with tunable spectral band switching and amplitude modulation capabilities across the near- to mid-infrared, and (ii) reconfigurable chiral metasurfaces, whose chiroptical activity can be switched between the visible and the near-infrared. Experimental results show excellent agreement with numerical simulations and reveal high uniformity across large areas. This work provides a universal, thermally robust and scalable platform for the production of reconfigurable metasurfaces based on phase-change materials, paving the way to low-cost, photonic devices with reconfigurable optical responses that could be extended far beyond the applications demonstrated here., CRdG acknowledges funding from the Marie Sklodowska Curie Individual Fellowship METASCALE (101068089). YZ ackonwledges founding from the Chinese Council (CSC No. 202406030183). This work also received funding from the Spanish AEI through grant PID-2022-141956NB-I00 (OUTLIGHT) and the Severo Ochoa Excellence programme CEX2023-001263-S (MATRANS24). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. CDW acknowledges funding from the EPSRC (grants EP/W022931/1 and EP/W003341/1). The authors are grateful to Videsh Kumar for providing h-PDMS hole-stamps for the imprinting of triskelia m-TiO2 patterns, and to Afroditi Koutsogianni and Ana Conde-Rubio for sharing the time of their SEM sessions. Authors would like to thank Dr Anna Esther Carrillo of the ICMAB electron microscopy Service for her assistance with EDS analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed