Skip to main content

ESTRUCTURACION DE MATERIALES AVANZADOS MEDIANTE LASERES ULTRARRAPIDOS PARA APLICACIONES EN FOTONICA, SENSADO Y BIO-ACTUACION: ESTRUCTURACION LASER Y APLICACIONES

PID2020-112770RB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Dynamics of phase transformations in Si and Ge upon strong excitation with UV femtosecond laser pulses

  • Puerto, Daniel
  • Solis, Javier
  • Siegel, Jan
  • Puerto, Daniel|||/items/b76fae6f-7ae0-4a4d-82a3-038fb7d7ff43
Femtosecond laser processing of semiconductors has evolved into a mature, high-precision fabrication technique, enabling a wide range of applications. While initially most studies have employed pulses at near infrared wavelengths, the interest in using UV laser pulses is constantly increasing due to the different excitation conditions as a consequence of the much shorter optical penetration depth, leading to an improved resolution. In this context, fundamental studies on the temporal dynamics of phase transformations triggered by such pulses are necessary in order to comprehend and eventually control the complex phase transformation pathways. Here, we report a detailed time-resolved study on the phase transformation dynamics of crystalline silicon and germanium upon irradiation with single 400 nm, 100 fs laser pulses in the moderate and high excitation regime. To this end, we have employed fs-resolved optical microscopy with a probe wavelength of 800 nm to study the reflectivity evolution of the irradiated surface over a temporal window ranging from 100 fs up to 20 ns. At moderate excitation fluence, the data reveals the entire sequence of laser-induced processes, starting from the generation of a free-electron plasma, non-thermal melting, ablation onset and expansion of a semi-transparent ablation layer with sharp interfaces. At excitation with peak fluences more than 30 times the ablation threshold, an anomalous transient high-reflectivity state is observed, which might be indicative of a recoil pressure-induced liquid–liquid phase transition. Moreover, 70 nm-thick amorphous surface layers are formed in both materials after irradiation at moderate fluences. Overall, our results provide relevant information on both, transformation dynamics and final state of both materials for fs-pulse excitation in the near-UV wavelength range.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multiscale ultrafast laser texturing of marble for reduced surface wetting

  • Ariza, Rocío
  • Álvarez-Alegría, Miguel
  • Costas, Gloria
  • Tribaldo, Leo
  • González-Elipe, Agustín R.
  • Siegel, Jan
  • Solís Céspedes, Javier
27 pags., 11 figs., 4 tabs., The modification of the wetting properties of marble surfaces upon multi-scale texturing induced by ultrafast laser processing (340 fs pulse duration, 1030 nm wavelength) has been investigated with the aim of evaluating its potential for surface protection. The contact angle (CA) of a water drop placed on the surface was used to assess the wettability of the processed areas. Although the surfaces are initially hydrophilic upon laser treatment, after a few days they develop a strong hydrophobic behavior. Marble surfaces have been irradiated with different scan line separations to elucidate the relative roles of multi-scale roughness (nano- and micro-texture) and chemical changes at the surface. The time evolution of the contact angle has been then monitored up to 11 months after treatment. A short and a long-term evolution, associated to the combined effect of multi-scale roughness and the attachment of chemical species at the surface over the time, have been observed. XPS and ATR measurements are consistent with the progressive hydroxylation of the laser treated surfaces although the additional contribution of hydrocarbon adsorbates to the wettability evolution cannot be ruled-out. The robustness of the results has been tested by CA measurements after cleaning in different conditions with very positive results., This work was financially supported by the EU through project FET-ILP 852048 (BioPromarL), the Spanish Research Agency (MCIU/AEI/Spain) through projects TEC2017-82464-R, PID2020-112770RB-C21, RTI2018-097195B-100 and PID2020-112770RB-C21, UCM-Santander 2019 (PR87/19-22613) and the National Research Council of Spain (CSIC) through project 2020AEP049. R. Ariza acknowledges the European Social Fund (ESF) and the Youth Employment Initiative (YEI) of the Madrid region through the PEJD- 2019-PRE/IND-16755 grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-Step Fabrication of High-Performance Extraordinary Transmission Plasmonic Metasurfaces Employing Ultrafast Lasers

  • Ruiz de Galarreta, Carlota
  • Casquero, Noemí
  • Humphreys, Euan
  • Bertolotti, Jacopo
  • Solís Céspedes, Javier
  • Wright, C.D.
  • Siegel, Jan
9 pags., 6 figs., Plasmonic metasurfaces based on the extraordinary optical transmission (EOT) effect can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in important technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT metasurfaces are nowadays fabricated with nano- and micro-lithographic techniques, requiring many processing steps and carrying out in expensive cleanroom environments. In this work, we propose and experimentally demonstrate a novel, single-step process for the rapid fabrication of high-performance mid- and long-wave infrared EOT metasurfaces employing ultrafast direct laser writing. Microhole arrays composing extraordinary transmission metasurfaces were fabricated over an area of 4 mm2 in timescales of units of minutes, employing single pulse ablation of 40 nm thick Au films on dielectric substrates mounted on a high-precision motorized stage. We show how by carefully characterizing the influence of only three key experimental parameters on the processed micro-morphologies (namely, laser pulse energy, scan velocity, and beam shaping slit), we can have on-demand control of the optical characteristics of the extraordinary transmission effect in terms of transmission wavelength, quality factor, and polarization sensitivity of the resonances. To illustrate this concept, a set of EOT metasurfaces having different performances and operating in different spectral regimes has been successfully designed, fabricated, and tested. Comparison between transmittance measurements and numerical simulations has revealed that all the fabricated devices behave as expected, thus demonstrating the high performance, flexibility, and reliability of the proposed fabrication method. We believe that our findings provide the pillars for mass production of EOT metasurfaces with on-demand optical properties and create new research trends toward single-step laser fabrication of metasurfaces with alternative geometries and/or functionalities, This work was financially supported by the Spanish Research Agency (MCIU/AEI/Spain) through project TEC2017- 82464-R and PID2020-112770RB-C21, as well as by the National Research Council of Spain (CSIC) for the intramurales project 201850E057
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanisms driving self-organization phenomena in random plasmonic metasurfaces under multipulse femtosecond laser exposure: A multitime scale study

  • Eles, Balint
  • Rouquette, Paul
  • Siegel, Jan
  • Amra, Claude
  • Lumeau, Julien
  • Moreau, Antonin
  • Hubert, Christophe
  • Zerrad, Myriam
  • Destouches, Nathalie
16 pags., 5 figs., Laser-induced transformations of plasmonic metasurfaces pave the way for controlling their anisotropic optical response with a micrometric resolution over large surfaces. Understanding the transient state of matter is crucial to optimize laser processing and reach specific optical properties. This article proposes an experimental and numerical study to follow and explain the diverse irreversible transformations encountered by a random plasmonic metasurface submitted to multiple femtosecond laser pulses at a high repetition rate. A pump-probe spectroscopic imaging setup records pulse after pulse, and with a nanosecond time resolution, the polarized transmission spectra of the plasmonic metasurface, submitted to 50,000 ultrashort laser pulses at 75 kHz. The measurements reveal different regimes, occurring in different ranges of accumulated pulse numbers, where successive self-organized embedded periodic nanostructures with very different periods are observed by post-mortem electron microscopy characterizations. Analyses are carried out; thanks to laser-induced temperature rise simulations and calculations of the mode effective indices that can be guided in the structure. The overall study provides a detailed insight into successive mechanisms leading to shape transformation and self-organization in the system, their respective predominance as a function of the laser-induced temperature relative to the melting temperature of metallic nanoparticles and their kinetics. The article also demonstrates the dependence of the self-organized period on the guided-mode effective index, which approaches a resonance due to system transformation. Such anisotropic plasmonic metasurfaces have a great potential for security printing or data storage, and better understanding their formation opens the way to smart optimization of their properties., The French authors acknowledge ANR project MIXUP (ANR-18-CE39-0010). This work was partially supported by the joint project SAMUL within the PICS programme between the CSIC and the CNRS. JSi acknowledges the Spanish Ministry of Science, Innovation and Universities for financial support through research grant PID2020-112770RB-C21 and the CSIC for the intramurales project 201850E057, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Propagation dynamics of the solid-liquid interface in Ge upon ns and fs laser irradiation

  • Casquero, Noemí
  • Ruiz de Galarreta, Carlota
  • Fuentes-Edfuf, Yasser
  • Solís Céspedes, Javier
  • Wright, C.D.
  • Siegel, Jan
13 pags., 9 figs., Monitoring the laser-induced melting and solidification dynamics of Ge upon laser irradiation is an enormous challenge due to the short penetration depth of its liquid phase. In this work, real-time pump-probe experiments in combination with finite element calculations have been employed to investigate the melting and solidification dynamics of germanium upon ns and fs laser pulse irradiation (λ = 800 nm). Excellent agreement between experiments and simulations allowed us to indirectly determine additional time- and depth-dependent information about the transformation dynamics of germanium, including the thickness evolution of the molten layer, as well as its melting and solidification velocities for the two pulse durations for different fluences. Our results reveal considerable differences in the maximum thickness of the molten Ge superficial layers at sub-ablative fluences for ns and fs pulses, respectively. Maximum melt-in velocities of 39 m s−1 were obtained for ns pulses at high fluences, compared to non-thermal melting of a thin layer within 300 fs for fs pulses already at moderate fluences. Maximum solidification velocities were found to be 16 m s−1 for ns pulses, and up to 55 m s−1 for fs pulses. Weak signs of amorphization were observed for fs excitation, suggesting that the lower limit of solidification velocities for a complete amorphization is above 55 m s−1. In addition, we show high precision measurements of the melt-in velocities over the first 20 nm by means of fs microscopy with sub-ps temporal resolution. Here, differences of the melt-in process of several orders of magnitude were observed, ranging from virtually instantaneous melting within less than 2 ps even for a moderate peak fluence up to 200 ps for fluences close to the melting threshold., This work was financially supported by the Spanish Research Agency (MCIU/AEI/Spain) through Project PID2020- 112770RB-C21. The authors acknowledge a pre-doctoral fellowship from the MICINN for N Casquero. C Ruiz de Galarreta acknowledges the Margarita Salas fellowship (CA1/RSUE/2021-00829) from the Spanish Government.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation

  • Florian, Camilo
  • Fuentes-Edfuf, Yasser
  • Solís Céspedes, Javier
  • Skoulas, E.
  • Stratakis, E.
  • Sánchez-Cortés, Santiago
  • Siegel, Jan
17 pags., 8 figs. -- This article belongs to the Special Issue Short and Ultra-Short Laser Materials Processing – Advantages and Applications, The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and µ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput., This research was supported by the LiNaBioFluid Project (H2020-FETOPEN-2014–2015RIA, Grant No. 665337) of the European Commission as well as the research grants (TEC2017-82464-R and PiD2020-112770RB-C21) from the Spanish Ministry of Economy and Competitiveness. C.F. acknowledges the support from the European Commission through the Marie Curie Individual Fellowship—Global Grant No. 844977.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical Properties of 2D Micro- and Nanostructures of ZnO:K

  • Ariza, Rocío
  • Urbieta, Ana
  • Solís Céspedes, Javier
  • Fernández, Paloma
Artículo con 3 tablas y 12 figuras, ZnO nano- and microstructures doped with K were grown by the Vapor–Solid method. Wires and needles are the main morphology observed, although some structures in the form of ribbons and triangular plates were also obtained. Besides these, ball-shaped structures which grow around a central wire were also detected. Raman and cathodoluminescence investigations suggest that variations in morphology, crystalline quality and luminescence emissions are related to the different lattice positions that K occupies depending on its concentration in the structures. When the amount is low, K ions mainly incorporate as interstitials (K), whereas K occupies substitutional positions of Zn (K) when the amount of K is increased. Electron Backscattered Diffraction shows that ribbons and triangular plates are oriented in the (0001) direction, which indicates that the growth of this type of morphologies is related to distortions introduced by the K since this position favors the growth in the (0001) plane. In the case of the ball-shaped structures, the compositional analysis and Raman spectra show that they consist of KSO. Finally, the capability of the elongated structures to act as waveguides and optical resonators was investigated. Due to the size of the K ion, practically double that of the Zn, and the different positions it can adopt within the ZnO lattice (K or K), high distortions are introduced that compromise the resonators performance. Despite this, quality factor (Q) and fineness (F) show acceptable values (80 and 10 at 544 nm, respectively), although smaller than those reported for doping with smaller size alkali, such as Li., This work was funded by the Spanish Research Agency (MCIU/AEI/Spain) via project PID2020-112770RB-C21, the Complutense University of Madrid—Banco Santander via project UCM- Santander 2019 (PR87/19-22613) and Complutense University—Comunidad de Madrid via project PR65/19-22464.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast Electron Dynamics and Optical Interference Tomography of Laser Excited Steel

  • Fuentes-Edfuf, Yasser
  • García-Lechuga, Mario
  • Solís Céspedes, Javier
  • Siegel, Jan
Artículo con 1 tabla y 5 figuras, Femtosecond laser machining of materials has transformed into a mature high-precision technology, giving access to a wide range of applications. Yet, for a complete exploitation of its full potential, a detailed knowledge of the complex laser–matter interaction processes is required. For the case of the application-relevant material steel, a complete study of the electron dynamics and material transformation upon single laser pulse irradiation (800 nm, 120 fs) is reported. Detailed analysis of the obtained time- and fluence-dependent reflectivity map reveals that ultrafast electron heating during the pulse is directly followed by energy transfer to the lattice within a few picoseconds, reaching fluence-dependent peak temperatures from below melting threshold to above the boiling point. Moreover, an innovative approach to obtain the ultrafast-evolving 3D structure of a femtosecond laser excited material is reported, unraveling the dynamics of complex processes as melting, ablation, and solidification. Combined with modeling, the evolving optical properties, multilayer structure, and expansion velocities can be precisely determined. The information obtained from this study will contribute to further increase the achievable precision and wealth of structures that can be produced by designing efficient pulsed energy deposition schemes for selective re-excitation of the material., This work was partly funded by the Spanish Research Agency (MCIU/AEI/Spain) through project ULS_PSB (PID2020-112770RB-C21) and the European Regional Development Fund (ERDF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast-laser powder bed fusion of oxygen-deficient Nb2O5 ceramics with highly improved electrical properties

  • Sotillo, Belén
  • Ariza, Rocío
  • Fernández, Paloma
  • Solís Céspedes, Javier
Artículo con 10 figuras, In this work, NbO layers with highly improved electrical properties respect to pristine material have been produced by ultrafast-laser powder bed fusion process. The conditions required for producing uniform and compact layers of NbO from powder material have been studied and optimized. It has been established that ultrafast-laser irradiation, performed in air at room temperature, leads to the formation of dense NbO layers with the high temperature monoclinic crystal structure (H-NbO) but oxygen deficient. The layers show a preferential crystal orientation with the short axis of the monoclinic structure lying in the structure plane. This preferential orientation can be controlled by the laser irradiation conditions. Anisotropic resistivity has been observed as a consequence of the induced microstructure, while the overall material resistivity is decreased by more than eight orders of magnitude due to the oxygen deficiency. These results indicate that it is feasible to use ultrafast laser processing to promote high-temperature non-stoichiometric niobium oxide phases in a few seconds and with low energy consumption. The highly improved electrical properties of the laser irradiated NbO layers are extremely interesting for different electronic and sensing applications., The authors are grateful to the Comunidad de Madrid for support via the Project PR65/19-22464 (Proyectos de I+D para jóvenes doctores) and MCIN/AEI/10.13039/501100011033 for the financial support through grant PID2020-112770RB-C21. This work has also been funded by Complutense University of Madrid and Banco Santander via the project UCM-Santander 2019 (PR87/19-22613). B. Sotillo acknowledges financial support from Comunidad de Madrid (Ayudas del Programa de Atracción de Talento 2017-T2/IND-5465). We acknowledge the Technical Services of CENIM-CSIC for the XPS measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An Integrated Pump-Controlled Variable Coupler Fabricated by Ultrafast Laser Writing

  • Benedicto, David
  • Martín, Juan Carlos
  • Días-Ponte, Antonio
  • Solís Céspedes, Javier
  • Vallés, J. A.
The design and fabrication of a integrated symmetric directional coupler dependent o the pumping power and operating at a 1534 nm wavelength is reported. The twin-core waveguide was inscribed into Er3+/Yb3+ co-doped phosphate glass by a femtosecond laser direct writing technique. By optical pumping, the coupling ratio can be modulated due to the changes induced in the refractive index of the material. The experimental results demonstrated that the coupling ratio can be tuned continuously from 100/0 to 50/50 by increasing the pump’s power from 0 to 350 mW. The developed twin-core coupler has promising applications for on-chip all-optical signal processing and communication systems., This work has been partially funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 through PID2019-108598GB-I00, by the Government of Aragon through the research group TOL under Grant E44-23R and by MCIN/AEI/10.13039/501100011033 through PID2020-112770RB-C21 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-Time 3D Visualization of the Formation of Micrograting Structures Upon Direct Laser Interference Patterning of Ge

  • Alvarez-Alegría, Miguel
  • Ruiz de Galarreta, Carlota
  • Siegel, Jan
10 pags., 8 figs., 1 tab. -- Correction added on August 11th, 2023 after first online publication: The spelling of the second author’s last name was corrected from “de Ruiz de Galarreta” to “Ruiz de Galarreta” and the formatting of equations 4–6 was fixed., Direct Laser Interference Patterning (DLIP) is a versatile technique that enables the fabrication of periodic micro- to nanometric scale structures over large areas in a variety of materials. The periodically modulated excitation pattern can be exploited to trigger a range of complex processes, including heating, melting, ablation, and matter reorganization. In this work, a novel strategy is developed to combine deep-ultraviolet (UV) DLIP (λ = 193 nm, τ = 23 ns) and real-time optical reflectivity and diffraction techniques to unravel the formation dynamics of grating structures with periods down to Λ = 740 nm. Applied to crystalline Ge wafers, single-pulse topography modulation profiles with amplitudes up to 85 nm can be imprinted. Moreover, the dynamics of the melting and solidification processes, as well as the surface topography deformation, can be followed in real-time. Combined with a model, changes in topography over time with ns resolution can be obtained. The results unambiguously reveal that the formation process of the 3D structures can only be understood when taking both Marangoni convection and thermocapillary waves into account. The technique presented here has the potential to unravel the formation dynamics of a wide range of periodic structures in other materials., This work has been partly funded by the national research grant ULS_PSB (PID2020-112770RB-C21) from the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF), as well as by research grant HyperSolar (TED2021-130894B-C22) funded by the Recovery and Resilience Facility of the EU. C.R. acknowledges a Margarita Salas grant from the Universidad Autónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Generation EU” program of the EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modeling optical amplification in Er/Yb-codoped integrated Bragg gratings

  • Sanz-Felipe, Ángel
  • Ariza, Rocío
  • Benedicto, David
  • Macias-Montero, M.
  • Vallés, Juan A.
  • Solís Céspedes, Javier
7 pags., 8 figs., Bragg gratings inscribed in active waveguides combine very efficient reflective properties with the amplifying capability of rare-earths, which may lead to large amplification and lasing performance. However, the response of these photonic structures highly depends on the grating parameters and working conditions, so modeling their behavior and dependences becomes fundamental. In this work, a numerical method has been implemented to simulate the optical power propagation along an Er/Yb-codoped integrated waveguide Bragg grating as a function of its most relevant operational parameters. The results obtained show the optimal conditions to maximize its performance as a highly amplifying reflector, but also its capability as a monolithic laser. In addition, the modeling results adequately match experimental values measured in fs-laser written structures in Er/Yb-codoped phosphate glass, supporting the accuracy of the numerical method developed and its usefulness for further optimizing these promising photonic structures., This work was partially supported by the grants PID2020-112770RBC21 and PID2019-108598 GB-I00 funded by MCIN/AEI/10.13039/ 501100011033, and by the Department of Industry and Innovation (Government of Aragon) ´ through the research group Grant E44-20R (cofinanciado con FEDER 2014–2020: Construyendo Europa desde Aragon). ´ S.F. acknowledges the projects CUD-2021_05 and CUD2023_12 of the Centro Universitario de la Defensa de Zaragoza. M.M. acknowledges the postdoctoral Juan de la Cierva Incorporacion ´ grant (IJCI-2017-33317) of the Spanish Ministry of Research and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Femtosecond laser thinning for resistivity control of tungsten ditelluride thin-films synthesized from sol-gel deposited tungsten oxide

  • Fernández García, A.
  • García-Lechuga, Mario
  • Agulló Rueda, F.
  • Rubio-Zuazo, Juan
  • Manso Silvan, M.
8 pags., 7 figs., In this work we present a route for fabricating WTe thin-films together with femtosecond laser post processing, enabling to finely control the conductivity. First, we produce amorphous films of WO on Si by spin-coating a sol-gel precursor followed by a consolidating annealing and a reduction process in partial H atmosphere, leading to porous metallic tungsten cluster layers. To achieve WTe, the films were exposed to the chalcogen vapours by isothermal closed space vapor transport. The formation of a tungsten ditelluride film composed of piled crystals could be confirmed and a gradient of surface rich Te identified through hard X-ray photoelectron spectroscopy. Finally, it is demonstrated that resistivity can be changed from 0.2 mΩ.m to 1 mΩ.m, while keeping the material characteristics. An anisotropic conductivity can be induced by direct selective thinning with fs laser writing (350 fs pulse duration, 515 nm laser wavelength) of 1D stripes. The obtained results, demonstrate that laser processing is a promising thin-film post-processing technique that can be applied to 2D transition metal dichalcogenide thin films., The current research was funded through grants PID2020–112770RB-C21 and PID2020–112770RB-C22 by MCIN/AEI/10.13039/501100011033. We acknowledge the Spanish MCIN and CSIC for provision of synchrotron radiation at the Spanish line at the ESRF trough project 25–02–972. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13–4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamics of phase transformations in Si and Ge upon strong excitation with UV femtosecond laser pulses

  • Puerto, D.
  • Solís Céspedes, Javier
  • Siegel, Jan
8 pags., 7 figs., 2 tabs., Femtosecond laser processing of semiconductors has evolved into a mature, high-precision fabrication technique, enabling a wide range of applications. While initially most studies have employed pulses at near infrared wavelengths, the interest in using UV laser pulses is constantly increasing due to the different excitation conditions as a consequence of the much shorter optical penetration depth, leading to an improved resolution. In this context, fundamental studies on the temporal dynamics of phase transformations triggered by such pulses are necessary in order to comprehend and eventually control the complex phase transformation pathways. Here, we report a detailed time-resolved study on the phase transformation dynamics of crystalline silicon and germanium upon irradiation with single 400 nm, 100 fs laser pulses in the moderate and high excitation regime. To this end, we have employed fs-resolved optical microscopy with a probe wavelength of 800 nm to study the reflectivity evolution of the irradiated surface over a temporal window ranging from 100 fs up to 20 ns. At moderate excitation fluence, the data reveals the entire sequence of laser-induced processes, starting from the generation of a free-electron plasma, non-thermal melting, ablation onset and expansion of a semi-transparent ablation layer with sharp interfaces. At excitation with peak fluences more than 30 times the ablation threshold, an anomalous transient high-reflectivity state is observed, which might be indicative of a recoil pressure-induced liquid–liquid phase transition. Moreover, 70 nm-thick amorphous surface layers are formed in both materials after irradiation at moderate fluences. Overall, our results provide relevant information on both, transformation dynamics and final state of both materials for fs-pulse excitation in the near-UV wavelength range., This work is part of the projects TEC2008-001183, PID2020-112770RB-C21 and TED2021-130894B-C22 and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation) and European Union NextGenerationEU/PRTR, as well as by the “Generalitat Valenciana” (project PROMETEO/2021/006).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Out-of-plane preferential growth of 2D molybdenum diselenide nanosheets on laser-induced periodic surface structures

  • Fernández García, A.
  • Ariza, Rocío
  • Solís Céspedes, Javier
  • Agulló Rueda, F.
  • Manso Silvan, M.
  • García-Lechuga, Mario
7 pags., 5 figs., In this study, we explore the morphology and orientation of molybdenum diselenide, a Van der Waals 2D material, through isothermal closed space vapor deposition on both pristine and laser-structured substrates. Laser structuring is conducted on dielectric (sapphire), semiconductor (silicon), and conductive (titanium nitride) substrates using ultrashort laser pulses, resulting in smooth topographic changes such as laser-induced periodic surface structures (LIPSS) or selective ablation. Scanning electron microscopy (SEM) reveals the pivotal role of surface structuring in the growth of out-of-plane MoSe nanosheets. This effect is particularly pronounced on monocrystalline substrates like sapphire and silicon, exhibiting in-plane growth on pristine substrates. Additionally, Raman spectroscopy confirms the vertical orientation of flakes on structured substrates and highlights the presence of active edge sites by demonstrating an increased abundance of deposited material. Overall, our findings emphasize the controllability of directing the growth of MoSe flakes through appropriate pre-treatment of the substrate, with potential applications in various fields, including Surface-Enhanced Raman Scattering (SERS). Furthermore, the scalability, reproducibility, and applicability to any substrate make ultrashort laser structuration a promising general strategy for orienting 2D materials., The current research was funded through grants PID2020-112770RB-C21 and PID2020-112770RB-C22 funded by MCIN/AEI/10.13039/501100011033. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). The initial part of the research leading to these results has received funding from LASERLAB-EUROPE (grant agreement no. 871124, European Union’s Horizon 2020 research and innovation programme. Grant project CNRS‐LP3002707).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Building Conventional Metasurfaces with Unconventional Interband Plasmonics: A Versatile Route for Sustainable Structural Color Generation Based on Bismuth

  • Chacón, Fernando
  • Ruiz de Galarreta, Carlota
  • Nieto-Pinero, Eva
  • García-Pardo, Marina
  • García-Tabares, Elisa
  • Ramos, Nicolás
  • Castillo, Miguel
  • López-García, Martín
  • Siegel, Jan
  • Toudert, Johann
  • Wright, C. David
  • Serna, Rosalía
9 pags., 7 figs. 1 tab., Plasmonic metasurfaces for structural color generation are typically built using the archetypal noble metals, gold, and silver. These possess plasmonic properties in the visible spectrum due to their inherent high free carrier densities. However, they are much more expensive compared to many other metals and exhibit several nanofabrication issues such as bad surface adhesion or thermally activated inter-diffusion. In this work, it is shown that interband plasmonic materials –whose optical properties are driven by interband transitions instead of free carriers— are appealing candidates for the fabrication of sustainable and cost-efficient metasurfaces for structural coloring. By using bismuth, an environment-friendly interband plasmonic material cheaper than gold and silver, nanodisks gap-plasmon metasurfaces and planar Fabry-Perot cavities are modeled and fabricated, which both successfully enable pure colors that can be robustly tailored upon suitable design. By direct experimental comparison between both types of design interms of color efficiency, fabrication complexity, and angular robustness; howbismuth-based gap surface plasmon metasurfaces can be excellent candidates for color microprinting is shown, whereas nanolayered BiFabry-Pérot cavities are ideal for macroscopic color coatings due to their easeof fabrication and implementation., C.R.de G. acknowledges funding from the Marie Sklodowska-Curie Individual Fellow-ship 101068089 (METASCALE) and from Margarita Salas/UniversidadAutónoma de Madrid (CA1/RSUE/2021-00829) funded by the “Next Gen-eration EU” program of the EU. This work had been partly funded by the national research grants ULS_PSB (PID2020-112770RB-C21), AlPHOM-ENA (PID2021-123190OB-I00f), and (ASSESS TED2021-129666B-C22)from the Spanish Research Agency (AEI, Ministry of Research andInnovation)) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) y la Agencia Estatal de Investigación (AEI) MCIN/AEI/10.13039/501 100 011 033 and by “ERDF a way of making Europe”, and the“European Union NextGenerationEU/PRTR”. R.S. and F.C.-S. would like toacknowledge funding from the INTRAMURALES-CSIC project LANAAP-EU (PIE-202050E195), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Amorphization and Ablation of Crystalline Silicon Using Ultrafast Lasers: Dependencies on the Pulse Duration and Irradiation Wavelength

  • García-Lechuga, Mario
  • Casquero, Noemi
  • Siegel, Jan
  • Solís Céspedes, Javier
  • Clady, Raphael
  • Wang, Andong
  • Utéza, Olivier
  • Grojo, David
17 pags., 10 figs., 2 tabs., Using lasers to achieve controlled crystallographic phase changes in silicon with high spatial precision promises new manufacturing solutions in semiconductor technologies, including silicon photonics. Recent demonstrations of improved amorphization thicknesses position ultrafast lasers as an optimum tool to meet current challenges. Here, the literature on silicon transformations is reviewed and complemented with new experimental data. This includes amorphization and ablation response as a function of pulse duration (τ = 13.9 to 134 fs at λ = 800 nm) and laser wavelength (λ = 258 to 4000 nm with τ = 200 fs pulses). For pulse duration-dependent studies on Si(111), the amorphization fluence threshold decreases with shorter durations, emphasizing the significance of non-linear absorption in the range of considered conditions. For wavelength-dependent studies, the amorphization threshold increases sharply from λ = 258 to 1030 nm, followed by near-constant behavior up to λ = 3000 nm. Conversely, the ablation threshold fluence increases in these specified ranges. Differences in the obtained amorphization thicknesses on Si(111) and Si(100) are also discussed, identifying an anomalously large fluence range for amorphization at λ = 258 nm. Finally, the question of the lateral resolution, shown as independent of the interaction nonlinearity is addressed., This work was conducted using ASUR and LaMP facilities at LP3. It has been supported by the European Union’s H2020 program (Grant agree-ments Laserlab-Europe No 871124 [project CNRS-LP3002792 and CNRS-LP300258] and ERC No 871124), grant HyperSolar (TED2021−130894B-C22) funded by MCIN/AEI/10.13039/501100011033 by “European UnionNextGenerationEU/PRTR”, grant ULS_PSB (PID2020-112770RB-C21)funded by MCIN/AEI/10.13039/501100011033, .and grant ANR-23-CE08-0029-03 funded by French National Research Agency (ANR). It was also partially funded by the CSIC through the call for internationalization i-LINK2022 (project ILINK22056). N. Casquero acknowledges a pre-doctoral fel-lowship from the MICINN. The authors acknowledge F. Chacón (Institutode Óptica, CSIC) for AFM measurement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile femtosecond laser interference patterning applied to high-precision nanostructuring of silicon

  • Solana-Ramírez, Irene
  • Chacón, Fernando
  • García-Lechuga, Mario
  • Siegel, Jan
10 pags., 9 figs., We present a high-precision nanostructuring technique based on beam interference from a commercial Ti:Sa femtosecond amplified laser (800 nm, 120 fs, 1 kHz, 1 mJ). Its potential and versatility is illustrated by applying the technique to the nanostructuring of silicon. Employing commercial and ad-hoc laser-fabricated diffractive optical elements together with standard optical components, periodic line gratings and spot arrays with tunable periods down to 650 nm can readily be fabricated. Moreover, fabrication of millimeter-size diffraction gratings via multipulse irradiation at processing speeds up to 0.5 mm/s is demonstrated. The variety of structures written in crystalline silicon feature amorphous fringes and dots with widths down to 300 nm. The corresponding complex topography profiles consist of surface elevations and depressions with sizes down to 120 nm that can be controlled by the laser fluence and fringe width, demonstrating the presence of several competing matter reorganization processes in the molten phase. The exceptional high-contrast ratio of the fringe intensity together with a near-Gaussian intensity envelope of the laser spot enable patterning with well-defined local fluences, paving the way for single-pulse fluence-dependent studies. The high-quality experimental data that can be obtained with this technique can prove critical for modelling attempts aimed at unravelling the underlying formation mechanisms of complex surface topographies in a wide range of materials. Furthermore, the technique presented here has outstanding potential for the rapid and versatile fabrication of high-precision metasurfaces., This work is part of the projects ULS_PSB (PID2020-112770RB-C21), HyperSolar (TED2021-130894B-C22) and ASSESS (TED2021-129666B- C22), and has been financed by MCIN/AEI/10.13039/501100011033 (Ministry of Science and Innovation/State Agency of Investigation), FEDER (European Regional Development Fund), as well as by the European Union NextGenerationEU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optoplasmonic tuneable response by femtosecond laser irradiation of glass with deep-implanted gold nanoparticles

  • Solana-Ramírez, Irene
  • Ynsa, María Dolores
  • Cabello, Fátima
  • Chacón, Fernando
  • Siegel, Jan
  • García-Lechuga, Mario
8 pages, 5 figures, The manipulation of the optical properties of plasmonic nanocomposites is of high interest for the development of advanced optical devices with tailored unique properties. Achieving these objectives requires a combination of synthesis techniques and post-fabrication strategies. Here, we combine the use of two well-established physical strategies: MeV ion implantation and femtosecond laser processing. Firstly, we synthesize Au-doped soda lime glass nanocomposite through ion beam implantation (Au2+ at 1.8 MeV) followed by thermal annealing. This synthesis procedure results in a peculiar optical response based on the combination of Au-nanoparticle plasmonic resonance and a Fabry-Perot interference, caused by the deep implantation (centered at 480 nm). Secondly, this dual response is demonstrated to be highly tuneable by non-resonant femtosecond laser irradiation (800-nm wavelength and 130-fs pulse duration). Depending on the laser fluence, three transformation regimes are distinguished: supressing the interferometric response by spallative ablation, inducing vivid blue colors by surface swelling, and producing red-shifted color changes by multi-shot irradiation at low fluences. The proposed method is very versatile, since it is applicable to any dielectric matrix or implanted element. This work paves the way to a new route for the development of scalable and tuneable nanocomposites with several potential applications in optics., The current research was funded through grants ULS_PSB(PID2020112770RB-C21 and PID2020-112770RB-C22) funded by MCIN/AEI/ 10.13039/501100011033 and ASSESS (TED2021-129666B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support, in particular to Jesús S´anchez Prieto. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Laboratorio de Microscopías Avanzadas" at the University of Zaragoza. I. S. acknowledges for their support and help in RBS analysis to Jose Gonzalo de los Reyes (IO, CSIC) and Gaston García Lopez (CMAM-UAM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, R.
  • Muñoz-Noval, A.
  • Briz, José Antonio
  • Murias, J. R.
  • Espinosa-Rodríguez, A.
  • Fraile, Luis M.
  • Agulló Rueda, F.
  • Ynsa, M. D.
  • Tavares de Sousa, C.
  • Cortés-Llanos, B.
  • García-López, G.
  • Nácher, Enrique
  • García Tavora, Vicente
  • Mont I Geli, N.
  • Nerio, A.N.
  • Onecha, V. V.
  • Pallàs, M.
  • Tarifeño, A.
  • Tengblad, Olof
  • Manso Silván, M.
  • Viñals, S.
8 pages, 7 figures, 2 tables, Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00, PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM(P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning spike-like morphologies in Silicon by sustainable fs-laser processing in air for enhanced light absorption

  • Gómez-Munoz, Gonzalo
  • Benítez-Fernández, Rafael
  • Godoy-Perez, Guillermo
  • Cabello, Fatima
  • García-Pardo, Marina
  • Caudevilla, Daniel
  • Gonzalo de los Reyes, J.
  • Solís Céspedes, Javier
  • García-Lechuga, Mario
  • Olea, Javier
  • Pastor, David
  • Siegel, Jan
11 pages, 6 figures, 2 tables, In this work, we demonstrate that ultrafast laser processing (1030 nm, 290 fs) of silicon in ambient air strongly improves the material's performance in terms of absorption, both in the visible and near infrared spectral range, which paves the way for further studies on increasing the sub-bandgap absorption after texturing, suggesting the material developed as a sustainable substitute for black silicon processed in greenhouse gases atmospheres. Our approach is based on the fabrication of spike-like morphologies in ambient air and the subsequent annealing of the material by pulsed laser melting or rapid thermal annealing to recover its crystalline phase. In particular, the influence of three main processing parameters (fluence, pulse number and repetition rate) on the properties of the spike-like structures has been investigated, each of them revealing the possibility of a direct control on the size, shape and period of the spikes, and achieving a total tuning range of the period from 4 μm to 14 μm for a single laser wavelength. Macroscopic areas have been fabricated using short processing times, yielding absorption values A > 94% over the UV–VIS-NIR spectral range (250 nm - 1100 nm) without hyperdoping, and A ≥ 20% for longer wavelengths up to 2500 nm, while preserving the electrical performance of pristine silicon., This work has been supported by grant HyperSolar (TED2021-130894B-C21 and TED2021-130894B-C22) funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, grant ULS_PSB (PID2020-112770RB-C21) funded by MICIU/AEI/10.13039/501100011033, and grant HyperPHIR (PID2020-117498RB-I00) funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation), the European Regional Development Fund (ERDF) and by the Spanish Ministry of Science and Innovation. G. Godoy-Pérez and R. Benítez-Fernández acknowledge the research contracts under the Investigo Program (CT19/23-INVM-35 and CT19/23-INVM-27) of the Ministerio de Trabajo y Economía Social. The authors would like to thank David Gomez at ICTP-CSIC for performing the 45° SEM measurements. Authors want to acknowledge assistance from CAI de Técnicas Químicas (Espectroscopía Raman y Correlación) and CAI de Técnicas Físicas (Implantación Iónica) from the Universidad Complutense de Madrid for Raman measurements and RTA. We also acknowledge ICTS-CNME (Madrid, Spain) for the SEM images and EDX characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selective growth of ZnO micro- and nano-structures on fs-laser processed metallic Zn substrates for large area applications

  • Ariza, Rocío
  • Urbieta, A.
  • Ferreiro, A.
  • Rabanal, M. E.
  • Fernández, P.
  • Solís Céspedes, Javier
9 pages, 7 figures, 4 tables, The synthesis of large area micro- and nano-structured ZnO surfaces has been successfully achieved through a two-step process. It involves the irradiation of Zn metal sheets with femtosecond laser pulses (350 fs at 1030 nm) at high repetition rates (100–500 kHz), and fast scanning speeds (cm/s). Subsequently, the irradiated sheets are thermally treated in an Argon flux at 380 °C, a temperature significantly lower than that typically required for growing micro- and nanostructures in ZnO. Fs-laser irradiation promotes the initial development of topography and the localized oxidation of the metal. This enables the further growth of micro- and nanostructures at preferential sites with good crystalline quality and luminescent properties. Analysis of the material at different processing steps shows that the initial laser-induced oxidation is crucial in defining ZnO growth mechanisms upon thermal treatment, and determining the final properties. We have tested the potential use of these structures as reusable photocalyst. The ease of catalyst recovery in photocatalysis experiments and the degree of degradation achieved may be considered as key performance indicators. Photocatalytic activity tests performed with a Rhodamine B solution showed degradation values up to 43 % over 90 min. The morphology of the samples remains unaltered after photocatalysis experiments., The authors are grateful to MCIN/AEI/10.13039/501100011033 for the financial support through grants PID2020–112770RB-C21, PID2019–106631GB-C43 and CPP2022–009910, UCM under project PR3/23–30813, and project S2018/NMT-4411. RA acknowledges the funding from a Marie Skłodowska-Curie Postdoctoral grant (No 101149132)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon amorphization responses by combined irradiations with MeV ion beams and ultrashort laser pulses

  • Solana-Ramírez, Irene
  • Ynsa, M. Dolores
  • Agulló-Rueda, Fernando
  • Sánchez-Prieto, Jesús
  • Grojo, David
  • Siegel, Jan
  • García-Lechuga, Mario
7 pages, 4 figures, This work demonstrates a significant synergistic effect between MeV ion implantation and femtosecond laser irradiation in silicon amorphization. The achievable amorphization depth and the range of laser fluencies leading to amorphization is increased for implanted samples in comparison to pristine silicon. In Si(100) samples, prior to femtosecond laser irradiation (800 nm and 120 fs, or 1030 nm and 180 fs) ion-induced defects are produced with protons (0.6, 1 and 2 MeV) or Si-ions (2 MeV) at varying ion-irradiation fluences. Then, the investigated defects densities before laser irradiation range from low levels to levels approaching ion-induced amorphization (defects per atom, dpa, from 10<sup>–9</sup> to 0.1). The optimal pre-conditioning for subsequent femtosecond laser-induced amorphization is found at a moderate defect density level, dpa =10<sup>–5</sup>. Additionally, it is shown that the achievable spatial resolution of the synergistic material amorphization is determined by the high resolution of the focused ion irradiation, suggesting a potential pathway for high-resolution patterning based on laser-assisted techniques. However, at high defect densities (dpa ≈ 0.1), the synergistic effect diminishes, and femtosecond laser irradiation instead reduces disorder, indicating a defect-annealing effect rather than further amorphization., This work is part of the projects ULS_PSB (grants PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (grant PID2023–148178OB-C22) funded by MCIN/AEI/10.13039/501100011033 and HyperSolar (grant TED2021–130894B-C22) funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056) and by the French National Research Agency (grant ANR-23-CE08–0029–03). Authors acknowledge the support from CMAM-UAM for the beam time (STD002/22, STD015/22, and STD024/23) and its technical staff support. Part of the work was conducted using LaMP facilities at LP3. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities vía a doctoral grant (FPU23/01300)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and nonlinear optical properties of TeO2–WO3–PbO thin film glasses

  • Gorni, Giuliio
  • Muñoz-Martín, David
  • Ruiz de la Cruz, A.
  • Martin-Diaconescu, V.
  • Simonelli, L.
  • García-López, J.
  • Fernández-Navarro, José María
  • Solís Céspedes, Javier
  • Gonzalon de los Reyes, J.
10 pages, 8 figures, 3 tables, Lead tungsten tellurite thin film glasses have been produced by pulsed laser deposition in a broad TeO2 compositional range (50–85 mol%). Films present high transparency with an optical band gap Eg = 3.3–3.4 eV, large refractive index (n > 2) and reduced absorption (k < 10−4) in the visible and near infrared ranges, whereas their nonlinear optical response (∣χ(3)∣) is found to be ≥ 10−12 esu at 1.3 μm. The dependence of n, Eg and ∣χ(3)∣ with film composition is analyzed and compared with the values determined for the parent bulk glasses. ∣χ(3)∣ increases as the TeO2 content in the film glasses decreases, while it remains constant for bulk glasses. This behaviour is analyzed in the frame of Line's model and correlated to the structural differences between bulk and film glasses. In the case of bulk glasses, X-ray absorption spectroscopy results at the W L3 and L1-edges clearly indicate the presence of W6+ ions in a distorted octahedral coordination, with the coordination environment and W–O bond distance remaining unchanged regardless of the WO3 content. Raman analysis suggests that films have a structure close to that of bulk glasses, with a moderate WO3 and PbO enrichment, and a relative increase of the non-bridging oxygen fraction that are proposed to be responsible for the observed increase of ∣χ(3)∣ in the films., This work was funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grants PID2020-112770RB-C21 and PID2021-123190OB-I00, and by the CSIC (PIE-202050E195). G. Gorni acknowledges Grant FJC2020-044866-I funded by MCIN/AEI/10.13039/501100011033, by Plan de Recuperación, Transformación y Resiliencia, and by the “European Union NextGeneration EU/PRTR”. A. Jha (Institute for Materials Research, Univ. of Leeds) is thanked for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid femtosecond laser and ion-implantation processing for controlled, deep, high-efficiency ablation in fused silica

  • García-Lechuga, Mario
  • Levy, Yoann
  • Solana-Ramírez, Irene
  • Cabello, Fátima
  • Ynsa, María Dolores
  • Bulgakova, Nadezhda M.
10 pages, 9 figures, 2 tables, Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser–matter interactions where the local fluence determines the processing depth, often limiting control over feature geometry and efficiency. Here, we present a hybrid approach combining localized Au implantation (1.8 MeV Au<sup>2+</sup> ions) into SiO<inf>2</inf> samples with femtosecond laser irradiation (250 fs), effectively tuning the laser–matter interaction and resulting morphology. At both 515 nm and 1030 nm irradiation wavelengths, single-shot femtosecond pulses produce cylindrical craters with sharp edges and flat-bottom profiles. Independently of the fluence, these craters exhibit a constant depth of 550 nm, corresponding to the region of maximum Au concentration. The effect manifests already at moderate fluence (∼4 J/cm<sup>2</sup>) and yields high ablation efficiency, up to 15 µm<sup>3</sup>/µJ. The hybrid method also works effectively at lower implantation doses that preserve the excellent transmission of fused silica, offering a promising pathway for the high-quality fabrication of flat optical components such as binary phase masks, phase lenses, or fused-silica micromolds., This work is part of the Spanish National projects ULS_PSB (PID2020–112770RB-C21 and PID2020–112770RB-C22), HyperSpec (PID2023-148178OB-C22) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and the Regional Government of Madrid through the project TEC MATRIX-CM (TEC-2024/TEC-85). It was partially funded by the CSIC through the call for internationalization i-LINK 2022 (project ILINK22056). The work of Y.L. and N.M.B. has been funded by a grant from the Programme Johannes Amos Comenius under the Ministry of Education, Youth and Sports of the Czech Republic SENDISO project No. CZ.02.01.01/00/22_008/0004596. Authors acknowledge the support from CMAM-UAM for the beam time (STD045/22, STD009/23, STD024/23 and STD025/23) and its technical staff support. I.S. acknowledges the support by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant (FPU23/01300)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, Raúl
  • Muñoz Noval, Alvaro
  • Briz, José Antonio
  • Rodríguez Murias, Javier
  • Espinosa Rodríguez, Andrea
  • Fraile, Luis Mario
  • Agulló Rueda, Fernando
  • Ynsa, Maria Dolores
  • Tavares de Sousa, Célia
  • Cortés Llanos, Belén
  • García López, Gastón
  • Nacher González, Enrique
  • García Távora, Vicente
  • Mont i Geli, Nil|||0000-0003-4249-7281
  • Nerio Aguirre, Amanda
  • Valladolid Onecha, Víctor
  • Pallàs i Solís, Max|||0000-0001-6137-0812
  • Tarifeño Saldivia, Ariel
  • Tengblad, Olof Erik
  • Manso Silvan, Miguel
  • Viñals Onsens, Silvia
Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00 and PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM (P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An integrated pump-controlled variable coupler fabricated by ultrafast laser writing

  • Benedicto, David
  • Martín, Juan C.
  • Dias-Ponte, Antonio
  • Solis, Javier
  • Vallés, Juan A.
The design and fabrication of a integrated symmetric directional coupler dependent o the pumping power and operating at a 1534 nm wavelength is reported. The twin-core waveguide was inscribed into Er3+/Yb3+ co-doped phosphate glass by a femtosecond laser direct writing technique. By optical pumping, the coupling ratio can be modulated due to the changes induced in the refractive index of the material. The experimental results demonstrated that the coupling ratio can be tuned continuously from 100/0 to 50/50 by increasing the pump’s power from 0 to 350 mW. The developed twin-core coupler has promising applications for on-chip all-optical signal processing and communication systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modeling optical amplification in Er/Yb-codoped integrated Bragg gratings

  • Sanz-Felipe, Ángel
  • Ariza, Rocío
  • Benedicto, David
  • Macias-Montero, Manuel
  • Vallés, Juan A.
  • Solís, Javier
Bragg gratings inscribed in active waveguides combine very efficient reflective properties with the amplifying capability of rare-earths, which may lead to large amplification and lasing performance. However, the response of these photonic structures highly depends on the grating parameters and working conditions, so modeling their behavior and dependences becomes fundamental. In this work, a numerical method has been implemented to simulate the optical power propagation along an Er/Yb-codoped integrated waveguide Bragg grating as a function of its most relevant operational parameters. The results obtained show the optimal conditions to maximize its performance as a highly amplifying reflector, but also its capability as a monolithic laser. In addition, the modeling results adequately match experimental values measured in fs-laser written structures in Er/Yb-codoped phosphate glass, supporting the accuracy of the numerical method developed and its usefulness for further optimizing these promising photonic structures.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Iodine-substituted hydroxyapatite nanoparticles and activation of derived ceramics for range verification in proton therapy

  • Magro Hernández, Raúl
  • Muñoz Noval, Alvaro
  • Briz, José Antonio
  • Rodríguez Murias, Javier
  • Espinosa Rodríguez, Andrea
  • Fraile, Luis Mario
  • Agulló Rueda, Fernando
  • Ynsa, Maria Dolores
  • Tavares de Sousa, Célia
  • Cortés Llanos, Belén
  • García López, Gastón
  • Nacher González, Enrique
  • García Távora, Vicente
  • Mont i Geli, Nil
  • Nerio Aguirre, Amanda
  • Valladolid Onecha, Víctor
  • Pallàs i Solís, Max
  • Tarifeño Saldivia, Ariel
  • Tengblad, Olof Erik
  • Manso Silvan, Miguel
  • Viñals Onsens, Silvia
Osteosarcoma is a radioresistant cancer, and proton therapy is a promising radiation alternative for treating cancer with the advantage of a high dose concentration in the tumor area. In this work, we propose the use of iodine-substituted hydroxyapatite (IHAP) nanomaterials to use iodine (127I) as a proton radiation tracer, providing access to range verification studies in mineralized tissues. For this purpose, the nanomaterials were synthesized at four iodine concentrations via hydrothermal synthesis. The materials were characterized via different microstructural techniques to identify an optimal high iodine concentration and pure apatite phase nanomaterial. Finally, such pure IHAP powders were shaped and irradiated with proton beams of 6 and 10 MeV, and their activation was demonstrated through subsequent decay analysis. The materials could be integrated into phantom structures for the verification of doses and ranges of protons prior to animal testing and clinical proton therapy treatments of tumors located deep under combined soft and calcified tissues., The current research was funded through grants PID2020-112770RB-C21, PDC2022-133382-I00 and PID2020-112770RB-C22 and PID2023-151371OB-C22 by MCIN/AEI/10.13039/501100011033 and FEDER, EU, grant FLASHOnChip (PLEC2022-009256) by MCIN, ASAP-CM (P2022/BMD-7434) from DGI-Comunidad de Madrid and CIPROM/2021/064 from Generalitat Valenciana. Beamtime at the CMAM through experiment EUB004/22 is acknowledged., Peer Reviewed, Postprint (published version)
Docta Complutense
Publication Artículo científico (JournalArticle)

Selective growth of ZnO micro- and nano-structures on fs-laser processed metallic Zn substrates for large area applications

  • Ariza, R.
  • Urbieta Quiroga, Ana Irene
  • Ferreiro, A.
  • Rabanal, M.E.
  • Fernández Sánchez, Paloma
  • Solis, J.
The synthesis of large area micro- and nano-structured ZnO surfaces has been successfully achieved through a two-step process. It involves the irradiation of Zn metal sheets with femtosecond laser pulses (350 fs at 1030 nm) at high repetition rates (100–500 kHz), and fast scanning speeds (cm/s). Subsequently, the irradiated sheets are thermally treated in an Argon flux at 380 ◦C, a temperature significantly lower than that typically required for growing micro- and nanostructures in ZnO. Fs-laser irradiation promotes the initial development of topography and the localized oxidation of the metal. This enables the further growth of micro- and nanostructures at preferential sites with good crystalline quality and luminescent properties. Analysis of the material at different processing steps shows that the initial laser-induced oxidation is crucial in defining ZnO growth mechanisms upon thermal treatment, and determining the final properties. We have tested the potential use of these structures as reusable photocalyst. The ease of catalyst recovery in photocatalysis experiments and the degree of degradation achieved may be considered as key performance indicators. Photocatalytic activity tests performed with a Rhodamine B solution showed degradation values up to 43 % over 90 min. The morphology of the simples remains unaltered after photocatalysis experiments.