Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFeCoO Thin Films

  • Machado, Pamela|||0000-0002-4235-0370
  • Sallés Perramon, Pol|||0000-0003-1426-611X
  • Frebel, Alexander
  • De Luca, Gabriele|||0000-0003-3757-3761
  • Ros, Eloi|||0000-0002-1952-6614
  • Hagendorf, Christian
  • Fina, Ignasi|||0000-0003-4182-6194
  • Puigdollers, Joaquim|||0000-0002-1834-2565
  • Coll, Mariona|||0000-0001-5157-7764
Photoferroelectric BiFeO (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFeCoO (BFCO)-based heterostructure. The device is completed with Sn-doped InO (ITO) and LaSrMnO (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bendable Polycrystalline and Magnetic CoFe2O4 Membranes by Chemical Methods

  • Sallés, Pol
  • Guzmán, Roger
  • Zanders, David
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Zhou, Wu
  • Devi, Anjana
  • Coll, Mariona
The preparation and manipulation of crystalline yet bendable functional complex oxide membranes has been a long-standing issue for a myriad of applications, in particular, for flexible electronics. Here, we investigate the viability to prepare magnetic and crystalline CoFe2O4 (CFO) membranes by means of the Sr3Al2O6 (SAO) sacrificial layer approach using chemical deposition techniques. Meticulous chemical and structural study of the SAO surface and SAO/CFO interface properties have allowed us to identify the formation of an amorphous SAO capping layer and carbonates upon air exposure, which dictate the crystalline quality of the subsequent CFO film growth. Vacuum annealing at 800 °C of SAO films promotes the elimination of the surface carbonates and the reconstruction of the SAO surface crystallinity. Ex-situ atomic layer deposition of CFO films at 250 °C on air-exposed SAO offers the opportunity to avoid high-temperature growth while achieving polycrystalline CFO films that can be successfully transferred to a polymer support preserving the magnetic properties under bending. Float on and transfer provides an alternative route to prepare freestanding and wrinkle-free CFO membrane films. The advances and challenges presented in this work are expected to help increase the capabilities to grow different oxide compositions and heterostructures of freestanding films and their range of functional properties., This work was funded by MICIN/AEI/10.13039/501100011033/FEDER through the projects Severo Ochoa FUNFUTURE CEX2019-00917-S and PID2020-114224RB-I00. We also acknowledge the financial support from the 2020 Leonardo Grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project, the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation LCF/BQ/DI19/11730026. D.Z. acknowledges the funding and financial support of the Fund of Chemical Industries (Kekulé fellowship) for his Ph.D. research. The authors are thankful to R. Solanas for his help with the RHEED measurements. This work has been done in the framework of the doctorate in material science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A transversal approach to predict surface charge compensation in piezoelectric force microscopy

  • Tan, Huan
  • Lyu, Jike
  • Sheng, Yunwei
  • Machado, Pamela
  • Song, Tingfeng
  • Bhatnagar, Akash
  • Coll, Mariona
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Fina, Ignasi
Piezoelectric force microscopy (PFM) has demonstrated to be a powerful tool to characterize ferroelectric materials. However, extrinsic effects, most notably, those resulting from surface charges, often mask or mirror genuine piezoelectric response, challenging PFM data understanding. The contribution of surface charges to PFM signal is commonly compensated by using appropriate external bias voltage, which is ad-hoc selected and sample dependent. Here, we determine the compensating voltage in thin films of different ferroelectric materials and we compare with the corresponding I-V characteristics recorded using suitable electrodes. It turns out that the sign and magnitude of the bias voltage required to compensate the surface charges are related to the asymmetry of the I-V characteristics. We propose that this relation results from the fact that the semiconducting properties of the material determine both the I-V dependence, and the sign of charged adsorbates. We show how to make use of this correlation to predict the required compensation voltage of a non-ferroelectric material and we show that spurious piezoelectric-like contributions are largely cancelled. The results provide guidelines to mitigate common extrinsic contributions in PFM imaging., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033), through the Severo Ochoa FUNFUTURE (project CEX2019-000917-S funded by MCIN/AEI), project TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and projects PID2020-118479RB-I00, PID2020-112548RB-I00, PID2020-114224RB-I00 and PID2019-107727RB-I00 funded by MCIN/AEI, and from CSIC through the i-LINK (LINKA20338) program are acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. HT, TS and YS are financially supported by China Scholarship Council (CSC) with No. 201906050014, 201807000104, and 201806410010. PM is financially supported by FPI fellowship PRE2018-084618. The work of HT, TS, PM and YS has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical Synthesis of La0.75Sr0.25CrO3 Thin Films for p-Type Transparent Conducting Electrodes

  • Machado, Pamela
  • Guzmán, Roger
  • Morera, Ramon J.
  • Alcalà, Jordi
  • Palau, Anna
  • Zhou, Wu
  • Coll, Mariona
The imperative need for highly performant and stable p-type transparent electrodes based on abundant metals is stimulating the research on perovskite oxide thin films. Moreover, exploring the preparation of these materials with the use of cost-efficient and scalable solution-based techniques is a promising approach to extract their full potential. Herein, we present the design of a chemical route, based on metal nitrate precursors, for the preparation of pure phase La0.75Sr0.25CrO3 (LSCO) thin films to be used as a p-type transparent conductive electrode. Different solution chemistries have been evaluated to ultimately obtain dense, epitaxial, and almost relaxed LSCO films. Optical characterization of the optimized LSCO films reveals promising high transparency with ∼67% transmittance while room temperature resistivity values are 1.4 Ω·cm. It is suggested that the presence of structural defects, i.e., antiphase boundaries and misfit dislocations, affects the electrical behavior of LSCO films. Monochromated electron energy loss spectroscopy allowed changes in the electronic structure in LSCO films to be determined, revealing the creation of Cr4+ and unoccupied states at the O 2p upon Sr-doping. This work offers a new venue to prepare and further investigate cost-effective functional perovskite oxides with potential to be used as p-type transparent conducting electrodes and be easily integrated in many oxide heterostructures., This work was funded by MICIN/AEI/10.13039/501100011033/FEDER through the projects Severo Ochoa FUNFUTURE CEX2019-00917-S, FREEOXIDES PID2020-114224RB-I00, MAGNETOLIGHT TED2021-130402B-I00, and HTSUPERFUN PID2021-124680OB-I00. We also acknowledge the financial support from the 2020 Leonardo Grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project, the National Key R&D Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). P.M. is grateful for financial support from the FPI fellowship (PRE2018-084618). The work of P.M. and J.A. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the Role of the Sr3−xCaxAl2O6 Sacrificial Layer Composition in Epitaxial La0.7Sr0.3MnO3 Membranes

  • Sallés, Pol
  • Guzman, Roger
  • Barrera, Aleix
  • Ramis, Martí
  • Caicedo, José Manuel
  • Palau, Anna
  • Zhou, Wu
  • Coll, Mariona
The possibility to fabricate freestanding single crystal complex oxide films has raised enormous interest to be integrated in next-generation electronic devices envisaging distinct and novel properties that can deliver unprecedented performance improvement compared to traditional semiconductors. The use of the water-soluble Sr3Al2O6 (SAO) sacrificial layer to detach the complex oxide film from the growth substrate has significantly expanded the complex oxide perovskite membranes library. Nonetheless, the extreme water sensitivity of SAO hinders its manipulation in ambient conditions and restricts the deposition approaches to those using high vacuum. This study presents a pioneering study on the role of Ca-substitution in solution processed SAO (Sr3−xCaxAl2O6 with x ⩽ 3) identifying a noticeable improvement on surface film crystallinity preserving a smooth surface morphology while favoring the manipulation in a less-restricted ambient conditions. Then, the study focuses on the effect of the sacrificial composition on the subsequent ex situ deposition of La0.7Sr0.3MnO3 (LSMO) by pulsed laser deposition, to obtain epitaxial films with a variable degree of strain. Finally, epitaxial and strain-free LSMO membranes with metal-insulator transition at 290 K are delivered. This study offers a hybrid and versatile approach to prepare and easily manipulate crystalline perovskite oxide membranes by facilitating ex situ growth on SAO-based sacrificial layer., This work was funded by MICIN/AEI/10.13039/ 501100011033/FEDER through the projects Severo Ochoa FUNFUTURE CEX2019-00917-S, CEX2021-001214-S and PID2020-114224RBI00, TED2021-130402B-I00. The authors also acknowledge the financial support from the 2020 Leonardo Grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project, the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). The project that gave rise to these results received the support of a fellowship (P.S.) from “la Caixa” Foundation (ID 100010434). The fellowship code was LCF/BQ/DI19/11730026. M.R. acknowledges the support from FPI fellowship PRE2021-099672. The authors are thankful to the Thin film scientific service at ICMAB and to Dr. J. Santiso from ICN2 for the fruitful discussions on structure properties. This work had been done in the framework of the doctorate in material science of the Autonomous University of Barcelona (P.S. and M.R.)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Chemical synthesis of complex oxide thin films and freestanding membranes

  • Sallés, Pol
  • Machado, Pamela
  • Yu, Pengmei
  • Coll, Mariona
Oxides offer unique physical and chemical properties that inspire rapid advances in materials chemistry to design and nanoengineer materials compositions and implement them in devices for a myriad of applications. Chemical deposition methods are gaining attention as a versatile approach to develop complex oxide thin films and nanostructures by properly selecting compatible chemical precursors and designing an accurate cost-effective thermal treatment. Here, upon describing the basics of chemical solution deposition (CSD) and atomic layer deposition (ALD), some examples of the growth of chemically-deposited functional complex oxide films that can have applications in energy and electronics are discussed. To go one step further, the suitability of these techniques is presented to prepare freestanding complex oxides which can notably broaden their applications. Finally, perspectives on the use of chemical methods to prepare future materials are given., This work was funded by CEX2019-00917-S/MICIN/AEI/10.13039/501100011033 and PID2020-114224RB-I00/MICIN/AEI/10.13039/501100011033. We also acknowledge the financial support from the 2020 Leonardo grant for Researchers and Cultural Creators BBVA Foundation, the i-link A20346-CSIC project. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/DI19/11730026. P. M. is grateful for financial support from the FPI fellowship (PRE2018-084618 MCIN/AEI/10.13039/5011000011033 by ESF invest in your future). We also acknowledge financial support from China Scholarship Council to P. Yu (201606920073). The work of P. M., P. S. and P. Y. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. We would like to acknowledge all the collaborators from those who provided novel metal precursors to the experts in thin film deposition and advanced characterization and SUMAN group members who made the work presented in this Feature article possible., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing

  • Sallés, Pol
  • Guzmán, Roger
  • Tan, Huan
  • Ramis, Martí
  • Fina, Ignasi
  • Machado, Pamela
  • Sánchez Barrera, Florencio
  • Luca, Gabriele de
  • Zhou, Wu
  • Coll, Mariona
The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices., This work was funded by CEX2023-001263-S/MCIN/AEI/10.13039/501100011033, PID2020-114224RB-I00/AEI/10.13039/501100011033, PID2019-107727RB-I00/AEI/10.13039/501100011033, TED2021-130402B–I00, and TED2021-130453B c21/MCIN/AEI/10.13039/501100011033 European Union “NextGenerationEU”/“PRTR”. We also acknowledge the financial support from the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). This research benefited from resources and supports from the Electron Microscopy Center at the University of Chinese Academy of Sciences. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434) LCF/BQ/DI19/11730026. P.M. acknowledges the FPI fellowship (PRE2018-084618 MCIN/AEI/10.13039/5011000011033). The authors are grateful to I. Caño for the assistance in thin film preparation and to the Thin Film Deposition Scientific Service at ICMAB-CSIC. G.D.L. acknowledges grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. This work has been done in the framework of the doctorate in material science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Epitaxially grown single-crystalline SrTiO3 membranes using a solution-processed, amorphous SrCa2Al2O6 sacrificial layer

  • Varshney, Shivasheesh
  • Ramis, Martí
  • Choo, Sooho
  • Coll, Mariona
  • Jalan, Bharat
Water-soluble sacrificial layers based on epitaxially grown, single crystalline (Ca, Sr, Ba)3Al2O6 layers are widely used for creating free-standing perovskite oxide membranes. However, obtaining these sacrificial layers with intricate stoichiometry remains a challenge, especially for molecular beam epitaxy (MBE). In this study, we demonstrate the hybrid MBE growth of epitaxial, single crystalline SrTiO3 films using a solution processed, amorphous SrCa2Al2O6 sacrificial layer onto SrTiO3 (001) substrates. Prior to the growth, oxygen plasma exposure was used to first create the crystalline SrCa2Al2O6 layer with well-defined surface crystallinity. Utilizing reflection high energy electron diffraction, X-ray diffraction, and atomic force microscopy, we observe an atomic layer-by-layer growth of epitaxial, single crystalline SrTiO3 films on the SrCa2Al2O6 layer with atomically smooth surfaces. The SrCa2Al2O6 layer was subsequently dissolved in deionized water to create free-standing SrTiO3 membranes that were transferred onto a metal-coated Si wafer. Membranes created with Sr-deficiency revealed ferroelectric-like behavior measured using piezo-force microscopy whereas stoichiometric films retained paraelectric-like behavior. These findings underscore the viability of using ex situ deposited amorphous SrCa2Al2O6 for epitaxial, single crystalline growth, as well as the importance of point defects in determining the ferroic properties in membranes., Synthesis of membrane and characterization (S.V. and B.J.) were supported by the U.S. Department of Energy through DE-SC0020211. Device characterization (fabrication and dielectric measurements) was supported as part of the Center for Programmable Energy Catalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at the University of Minnesota, under Award No. DE-SC0023464. S.C. acknowledges support from the Air Force Office of Scientific Research (AFOSR) through Grant Nos. FA9550-21-1-0025, FA9550-21-0460. Film growth was performed using instrumentations funded by AFOSR DURIP awards FA9550-18-1-0294 and FA9550-23-1-0085. Parts of this work were carried out at the Characterization Facility, University of Minnesota, which receives partial support from the NSF through the MRSEC program under award DMR-2011401. Exfoliation of films and device fabrication was carried out at the Minnesota Nano Center, which is supported by the NSF through the National Nano Coordinated Infrastructure under award ECCS-2025124. M.C. acknowledges funding by MICIN PID2020-114224RB-I00/AEI/10.13039/501100011033. The work of M.R. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFe0.9Co0.1O3 Thin Films

  • Machado, Pamela
  • Salles, Pol
  • Frebel, Alexander
  • Luca, Gabriele de
  • Ros, Eloi
  • Hagendorf, Christian
  • Fina, Ignasi
  • Puigdollers, Joaquim
  • Coll, Mariona
Photoferroelectric BiFeO3 (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFe0.9Co0.1O3 (BFCO)-based heterostructure. The device is completed with Sn-doped In2O3 (ITO) and La0.7Sr0.3MnO3 (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications., This work was funded by CEX2023-001263-S/AEI/10.13039/501100011033, PID2020-535 114224RB-I00/AEI/10.13039/501100011033, PID2019-536 107727RB-I00/AEI/10.13039/501100011033. The authors also acknowledge projects TED2021-130402B-I00 and TED2021-130453B-C21 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. The authors acknowledge Prof. Josep Fontcuberta for fruitful scientific discussions on the photoferroelectric behavior of BFCO heterostructures and Prof. Andreas Klein for his advice on XPS data acquisition and energy band alignment interpretation. Dr. G. Sauthier is also acknowledged for the support in the XPS measurements. P.M. and P.S. acknowledge financial support from the FPI fellowship (PRE2018-084618) and from the “la Caixa” Foundation LCF/BQ/DI19/11730026 fellowship. The work of P.M. and P.S. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. G.D.L. acknowledges funding from the Swiss National Science Foundation (SNSF) under Project No. P2EZP2-191865 and grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. G.D.L also acknowledges Prof. G. Catalan for the use of the off-axis sputtering system., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed