Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFeCoO Thin Films

  • Machado, Pamela|||0000-0002-4235-0370
  • Sallés Perramon, Pol|||0000-0003-1426-611X
  • Frebel, Alexander
  • De Luca, Gabriele|||0000-0003-3757-3761
  • Ros, Eloi|||0000-0002-1952-6614
  • Hagendorf, Christian
  • Fina, Ignasi|||0000-0003-4182-6194
  • Puigdollers, Joaquim|||0000-0002-1834-2565
  • Coll, Mariona|||0000-0001-5157-7764
Photoferroelectric BiFeO (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFeCoO (BFCO)-based heterostructure. The device is completed with Sn-doped InO (ITO) and LaSrMnO (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Robust multiferroicity and magnetic modulation of the ferroelectric imprint field in heterostructures comprising epitaxial HfZrO and Co

  • Zakusylo, Tetiana|||0000-0001-5933-7108
  • Quintana, Alberto|||0000-0002-9813-735X
  • Lenzi, Veniero|||0000-0002-3633-1966
  • Silva, José P. B.|||0000-0002-3485-7032
  • Marques, Luís
  • Yano, José Luís Ortolá
  • Lyu, Jike
  • Sort, Jordi|||0000-0003-1213-3639
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fina, Ignasi|||0000-0003-4182-6194
Magnetoelectric multiferroics, either single-phase or composites comprising ferroelectric/ferromagnetic coupled films, are promising candidates for energy efficient memory computing. However, most of the multiferroic magnetoelectric systems studied so far are based on materials that are not compatible with industrial processes. Doped hafnia is emerging as one of the few CMOS-compatible ferroelectric materials. Thus, it is highly relevant to study the integration of ferroelectric hafnia into multiferroic systems. In particular, ferroelectricity in hafnia, and the eventual magnetoelectric coupling when ferromagnetic layers are grown atop of it, are very much dependent on quality of interfaces. Since magnetic metals frequently exhibit noticeable reactivity when grown onto oxides, it is expected that ferroelectricity and magnetoelectricity might be reduced in multiferroic hafnia-based structures. In this article, we present excellent ferroelectric endurance and retention in epitaxial HfZrO films grown on buffered silicon using Co as the top electrode. The crucial influence of a thin Pt capping layer grown on top of Co on the ferroelectric functional characteristics is revealed by contrasting the utilization of Pt-capped Co, non-capped Co and Pt. Magnetic control of the imprint electric field (up to 40% modulation) is achieved in Pt-capped Co/HfZrO structures, although this does not lead to appreciable tuning of the ferroelectric polarization, as a result of its high stability. Computation of piezoelectric and flexoelectric strain-mediated mechanisms of the observed magnetoelectric coupling reveal that flexoelectric contributions are likely to be at the origin of the large imprint electric field variation. Magnetoelectric composite multiferroic comprising ferroelectric doped HfO and ferromagnetic cobalt coupled films is demonstrated to be a promising candidate for energy efficient memory computing.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magneto-Ionic Engineering of Antiferromagnetically RKKY-Coupled Multilayers

  • Ma, Zheng|||0000-0003-3655-1448
  • Arredondo-López, Aitor|||0009-0007-5147-3763
  • Wrona, Jerzy
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Langer, Juergen|||0000-0002-6319-8259
  • Berthold, Ocker
  • Pellicer, Eva|||0000-0002-8901-0998
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven ion motion offers a powerful means to modulate magnetism and spin phenomena in solids, a process known as magneto-ionics, which holds great promise for developing energy-efficient next-generation micro- and nano-electronic devices. Synthetic antiferromagnets (SAFs), consisting of two ferromagnetic layers coupled antiferromagnetically via a thin non-magnetic spacer, offer advantages such as enhanced thermal stability, robustness against external magnetic fields, and reduced magnetostatic interactions in magnetic tunnel junctions. Despite its technological potential, magneto-ionic control of antiferromagnetic coupling in multilayers (MLs) has only recently been explored and remains poorly understood, particularly in systems free of platinum-group metals. In this work, room-temperature voltage control of Ruderman-Kittel-Kasuya-Yosida (RKKY) interactions in Co/Ni-based SAFs is achieved. Transitions between ferrimagnetic (uncompensated) and antiferromagnetic (fully compensated) states is observed, as well as significant modulation of the RKKY bias field offset, emergence of additional switching events, and formation of skyrmion-like or pinned domain bubbles under relatively low gating voltages. These phenomena are attributed to voltage-driven oxygen migration in the MLs, as confirmed through microscopic and spectroscopic analyses. This study underscores the potential of voltage-triggered ion migration as a versatile tool for post-synthesis tuning of magnetic multilayers, with potential applications in magnetic-field sensing, energy-efficient memories and spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Decoupling Magnetic and Electric Field Control in Magneto-Ionic Materials for Energy-Efficient Brain-Inspired Memory Devices

  • Martínez Armesto, Luis|||0009-0003-0788-5067
  • Ma, Zheng|||0000-0003-3655-1448
  • Tan, Huan|||0000-0002-5579-2127
  • Pellicer, Eva|||0000-0002-8901-0998
  • Spasojevic, Irena|||0000-0002-6426-7009
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionic materials, which enable nonvolatile control of magnetism through voltage-driven ion migration, are emerging as promising candidates for neuromorphic computing. Unlike conventional memristors, these systems allow dual actuation by both electric and magnetic fields, providing a broader range of functional capabilities. The reliance on voltage rather than current significantly reduces Joule heating and enhances the energy efficiency. However, the general need for external magnetic fields to modulate the voltage-induced magnetic response remains a key limitation, undermining the full energy-saving potential of these systems. In this work, we present a magneto-ionic strategy in CoFeN that fully decouples the electric and magnetic field requirements. By taking advantage of a planar N 3- ion migration and the ferromagnetic exchange interactions between preexisting and newly generated CoFe magnetic regions, we achieve remanent-state magnetization control solely through applied voltage. The system exhibits behaviors reminiscent of neuromorphic-inspired functionalities, such as synaptic potentiation and depression, while also exhibiting a cumulative voltage-driven increase in magnetization in the absence of a magnetic field. Once the magnetic field is switched off, synaptic weight remains influenced by both the sample's magnetic and electric history. By eliminating the need for magnetic fields, our approach contributes to reduce energy consumption, offering a more efficient pathway for brain-inspired magneto-ionic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synergetic contributions of chemical doping and epitaxial stress to polarization in ferroelectric HfO2 films

  • Song, Tingfeng
  • Tan, Huan
  • Robert, Anne Claire
  • Estandia, Saúl
  • Gázquez, Jaume
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Literature is rich on the study of different strategies to tailor ferroelectric properties of HfO2. Among them, chemical doping is the most studied. La doped HfO2 films have attracted interest because they show very low leakage current and high endurance. On the other hand, stress controlled by substrate selection has shown to induce ferroelectric properties variations in Hf0.5Zr0.5O2 films. Here, we investigate stress effects in La-doped epitaxial HfO2 films. Interestingly, ferroelectricity is measured in films grown on substrates having a broad range of lattice parameter from 3.71 to 4.21 Å. While comparing the obtained results with those obtained in epitaxial Hf0.5Zr0.5O2, it is observed that La doped HfO2 shows always larger remanent polarization (Pr) if the same substrate is used. Films grown on substrates with large lattice parameter (TbScO3 and GdScO3) show very large values of remanent polarization (29 μC/cm2), but it is also noticeable that the films on substrates with small parameter (YAlO3) show remanent polarization above 5 μC/cm2, whereas negligible Pr was detected in equivalent Hf0.5Zr0.5O2 films. Therefore, chemical doping and epitaxial stress do not compete and can be both used to synergetically tailor ferroelectric properties and eventually improve them., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019–000917-S), TED2021–130453B-C21, PID2020–112548RB-I00 and PID2019–107727RB-I00 projects, and from CSIC through the i-LINK (LINKA20338) program, is acknowledged. Project is also supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. TS and HT are financially supported by China Scholarship Council (CSC) with No. 201807000104 and 201906050014, respectively. TS and HT work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona.The electron microscopy work has been carried out at the facilities of Centro Nacional de Microscopía Electrónica at UCM., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A transversal approach to predict surface charge compensation in piezoelectric force microscopy

  • Tan, Huan
  • Lyu, Jike
  • Sheng, Yunwei
  • Machado, Pamela
  • Song, Tingfeng
  • Bhatnagar, Akash
  • Coll, Mariona
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
  • Fina, Ignasi
Piezoelectric force microscopy (PFM) has demonstrated to be a powerful tool to characterize ferroelectric materials. However, extrinsic effects, most notably, those resulting from surface charges, often mask or mirror genuine piezoelectric response, challenging PFM data understanding. The contribution of surface charges to PFM signal is commonly compensated by using appropriate external bias voltage, which is ad-hoc selected and sample dependent. Here, we determine the compensating voltage in thin films of different ferroelectric materials and we compare with the corresponding I-V characteristics recorded using suitable electrodes. It turns out that the sign and magnitude of the bias voltage required to compensate the surface charges are related to the asymmetry of the I-V characteristics. We propose that this relation results from the fact that the semiconducting properties of the material determine both the I-V dependence, and the sign of charged adsorbates. We show how to make use of this correlation to predict the required compensation voltage of a non-ferroelectric material and we show that spurious piezoelectric-like contributions are largely cancelled. The results provide guidelines to mitigate common extrinsic contributions in PFM imaging., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033), through the Severo Ochoa FUNFUTURE (project CEX2019-000917-S funded by MCIN/AEI), project TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and projects PID2020-118479RB-I00, PID2020-112548RB-I00, PID2020-114224RB-I00 and PID2019-107727RB-I00 funded by MCIN/AEI, and from CSIC through the i-LINK (LINKA20338) program are acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. HT, TS and YS are financially supported by China Scholarship Council (CSC) with No. 201906050014, 201807000104, and 201806410010. PM is financially supported by FPI fellowship PRE2018-084618. The work of HT, TS, PM and YS has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Disentangling electronic and thermal contributions to light-induced resistance switching in BaTiO3 ferroelectric tunnel junction

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
In the presence of asymmetric potential barriers, such as those created by imprint fields, ferroelectric polarization can be reversed by light due to the photoinduced suppression of polarization. Both thermal effects and photocarrier-induced polarization screening may agree with this experimental observation, challenging its understanding. Here, we explore light-induced ferroelectric polarization switching in BaTiO3 thin films. Time-dependent photocurrent and photoresistance experiments at different wavelengths indicate that the optical switch of polarization is mainly driven by photocarriers rather than thermal effects. The effect of light on sample polarization is found to be relatively slow and that an illumination period as long as ≈100 s is required to achieve complete switching when using a 405 nm light wavelength and 1.4 W/cm2 power density. It is shown that this response is governed by the concentration of photo-generated charges, which is low due to the reduced light absorption of BaTiO3 films at the explored wavelengths. Our conclusions can help us to better design optically switching devices based on ferroelectric materials., Financial support from the Spanish Ministry of Science and Innovation (No. 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (Project No.CEX2019-000917-S funded by MCIN/AEI), Project No. TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and Project Nos. PID2020-118479RB-I00, PID2020-112548RB-I00, and PID2019-107727RB-I00 funded by MCIN/AEI, and from CSIC through the i-LINK (No. LINKA20338) program are acknowledged. Project supported by a 2020 Leonardo Grant for Researchers and Cultural Creators, BBVA Foundation. Xiao Long and Huan Tan are financially supported by the China Scholarship Council (CSC) under Grant Nos. 201806100207 and 201906050014. X.L. and H.T.’s work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferroelectric Hf0.5Zr0.5O2 films with improved endurance obtained through low temperature epitaxial growth on seed layers

  • Song, Tingfeng
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Crystallization temperature is a critical parameter in the stabilization of the metastable ferroelectric phase of HfO2. The optimal crystallization temperature used for polycrystalline films is too low to grow epitaxial films. We have developed a new growth strategy, based on the use of an ultrathin seed layer, to obtain high-quality epitaxial films of orthorhombic Hf0.5Zr0.5O2 at a lower temperature. The threshold temperature for epitaxy is reduced from about 750 °C to about 550 °C using a seed layer. Epitaxial films deposited at low temperatures exhibit highly enhanced endurance, and films grown at 550-600 °C show high polarization, no wake-up effect, and greatly reduced fatigue and improved endurance in comparison with the films deposited at high temperatures without a seed layer. We propose that the endurance enhancement is due to a positive effect of the defects, which limits the propagation of pinned ferroelectric domains., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804) and from CSIC through the i-LINK (LINKA20338) program is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. T. S. is financially supported by the China Scholarship Council (CSC) with No. 201807000104. T. S.'s work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. R. B. and G. S. G. acknowledge the financial support from the French National Research Agency (ANR) through the projects DIAMWAFEL (No. ANR-15-CE08-0034), LILIT (No. ANR-16-CE24-0022), and MITO (No. ANR-17-CE05-0018), as well as P. Regreny, C. Botella, and J. B. Goure for the technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polarization-dependent electrocaloric and pyroelectric effects in ferroelectric BaTiO3 thin films

  • Adkins, Joshua Willis
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Bakaul, Saidur R.
  • Abiade, Jeremiah T.
Herein, we examine the influence of controllable polarization reversal and built-in electric fields on pyroelectric and electrocaloric effects in a BaTiO3 thin film using a modified indirect method. We find that the magnitude of the sample's change in polarization with temperature is sensitive to the degree of polarization reversal. The pyroelectric response is small at low fractions of switched polarization and grows larger by several factors as larger fractions of polarization are reversed. This polarization reversal-sensitive pyroelectric behavior is the result of an internal built-in field, which has the effect of destabilizing low fractions of switched polarization and producing diminished pyroelectric effect. Greater fractions of switched polarization are more stable against backswitching and permit a larger pyroelectric response. Our findings highlight a characterization method for polarization-dependent pyroelectric effects in ferroelectric thin films, where built-in field effects are also present., J. T. Abiade acknowledges financial support from the U. S. National Science Foundation under Grant No. NSFDMR-1508220. Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033), through the Severo Ochoa FUNFUTURE (project CEX2019-000917-S funded by MCIN/AEI), project TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and projects PID2020-112548RB-I00 and PID2019-107727RB-I00 funded by MCIN/AEI are acknowledged. J. W. Adkins acknowledges the University of Illinois Chicago’s Pipeline to an Inclusive Faculty (PIF) Program. The work (Electronic measurements and part of manuscript preparation) at Argonne National Laboratory were supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. Lithographic patterning was conducted using equipment provided by the University of Illinois Chicago’s Nanotechnology Core Facility., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the ferroelectric switching mechanisms in ferroelectric pure and La doped HfO2 epitaxial thin films

  • Silva, Alexandre
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Silva, José P. B.
  • Marques, Luís
  • Lenzi, Veniero
Epitaxial orthorhombic phase La doped HfO2 films are promising for achieving robust ferroelectric polarization without wake-up effect. However, lowering the coercive field is crucial for achieving low-power memory devices. In this work, we have investigated the influence of the La content effect on the structural and ferroelectric properties of epitaxial HfO2 thin films. We show that while the remanent polarization is optimum for 2-5 at. % La-doped HfO2 films, the coercive field is decreased with La doping. The experimental work is supported by density functional theory (DFT) calculations which show that the polarization switching in epitaxial La:HfO2 films can be understood based on the synergetic contribution of the presence of a non-ferroelectric monoclinic phase and the La doping itself that causes a reduction of the nucleation and DW motion energy barriers for the crossing path, which makes it more probable than the non-crossing one., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. This work was supported by: (i) the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding Contract UIDB/04650/2020; (ii) exploratory project 2022.01740.PDTC and (iii) the European Union's Horizon 2020 research and innovation programme under grant agreement No 958174 (M-ERA-NET3/0003/2021 - NanOx4EStor). J. P. B. S. also thanks FCT for the contract under the Institutional Call to Scientific Employment Stimulus – 2021 Call (CEECINST/00018/2021). A.S. also acknowledges FCT for the PhD grant with reference 2022.13796.BD., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ferroelectric Electroresistance after a Breakdown in Epitaxial Hf0.5Zr0.5O2 Tunnel Junctions

  • Long, Xiao
  • Tan, Huan
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
The recent discovery of ferroelectricity in doped HfO2 has opened perspectives on the development of memristors based on ferroelectric switching, including ferroelectric tunnel junctions. In these devices, conductive channels are formed in a similar manner to junctions based on nonferroelectric oxides. The formation of the conductive channels does not preclude the presence of ferroelectric switching, but little is known about the device ferroelectric properties after conduction path formation or their impact on the electric modulation of the resistance state. Here, we show that ferroelectricity and related sizable electroresistance are observed in pristine 4.6 nm epitaxial Hf0.5Zr0.5O2 (HZO) tunnel junctions grown on Si. After a soft breakdown induced by the application of suitable voltage, the resistance decreases by about five orders of magnitude, but signatures of ferroelectricity and electroresistance are still observed. Impedance spectroscopy allows us to conclude that the effective ferroelectric device area after the breakdown is reduced, most likely by the formation of conducting paths at the edge., Financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033) through the Severo Ochoa FUNFUTURE (No. CEX2019-000917-S); the TED2021-130453B-C21 (AEI/FEDER, EU), PID2020-118479RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects; from Generalitat de Catalunya through 2021 SGR 00445 and 2021 SGR 00804 projects; and from CSIC through the i-LINK (No. LINKA20338) program is acknowledged. X.L. and H.T. are financially supported by the China Scholarship Council (CSC) through No. 201806100207 and 201906050014. The work of X.L. and H.T. has been done as part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vector piezoelectric response and ferroelectric domain formation in Hf0.5Zr0.5O2 films

  • Tan, Huan
  • Song, Tingfeng
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
The piezoelectric response in polycrystalline films of doped ferroelectric HfO2 has been explored so far; however, the lack of texture in most of the studied films prevents its full understanding. By selecting the appropriate substrate orientation, the ferroelectric orthorhombic phase ratio and crystallographic orientation can be modified in epitaxial films. We exploit this possibility to get further insight into the ferroelectric hafnium oxide piezoelectric response. While characterizing in-plane and out-of-plane piezoelectric responses, it is observed that their magnitude is mainly ruled by the presence of the orthorhombic phase and the polar axis of the polarization along the probing direction. It is also found for the as-grown state that along the out-of-plane direction a single ferroelectric domain is formed, and instead the in-plane response reveals a rich domain structure with a domain size of ≈10-30 nm. By characterizing the in-plane piezoelectric response, it is observed that it is anisotropic if the specific orientation, (110), of the SrTiO3 substrate is used. We propose that an out-of-plane single domain is formed due to the presence of an imprint electric field, whereas in-plane domains are formed by non-purely electrostatic interactions as revealed by their relatively large size. Besides, the small but sizeable in-plane anisotropic response is found to result from the in-plane crystallographic configuration, ultimately determined by the selected substrate., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects program and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. HT is financially supported by China Scholarship Council (CSC) with no. 201906050014. The work of HT has been done as part of his PhD program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Stable Epitaxially Crystallized Ferroelectric Hf0.5Zr0.5O2 Films

  • Lyu, Xueliang
  • Song, Tingfeng
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00, and from Generalitat de Catalunya (2021 SGR 00804) projects is acknowledged. We also acknowledge project TED2021-130453B–C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. I.F. acknowledges Ramón y Cajal contract RYC-2017-22531 (Fondo Social Europeo). X.L. and T.S. are financially supported by China Scholarship Council (CSC) with No.202206180011 and 201807000104, respectively. X.L. and T.S. work have been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effects of Doping, Stress, and Thickness on the Piezoelectric Response and Its Relation with Polarization in Ferroelectric HfO2

  • Tan, Huan
  • Estandía, Saúl
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
The piezoelectric response in hafnia is of interest because it is a CMOS-compatible material. It is known that polarization depends on the stabilization of the orthorhombic phase, which depends on several parameters, such as doping, stress, and thickness. Here, the piezoelectric response in epitaxial doped HfO2 films characterized by piezoelectric force microscopy, is investigated considering this multifactorial dependence. The impact of different levels of La and Zr doping, variations of stress effects controlled by substrate selection, and thickness effects on piezoresponse is analyzed. It is found that the piezoelectric response is mainly correlated with the polarization, i.e., it is primarily determined by the amount of the orthorhombic phase. Interestingly, Zr doping of hafnia is observed to result in a larger piezoresponse than La doping for films showing similar polarization. The piezoresponse is found to be the greatest for the pure ZrO2 film; however, the actual ferroelectric response is not observed by piezoelectric force microscopy, indicating an exception to the general tendency. It is concluded that in the case of samples showing larger amounts of the orthorhombic phase, extrinsic effects due to the tip radii effect can influence the evaluation of the amplitude of the piezoresponse., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects program and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. The authors also acknowledge project TED2021-130453B C21, funded by MCIN/AEI/10.13039/50110001103. H.T. is financially supported by the China Scholarship Council (CSC) with No. 201906050014. The work of H.T. has been done as part of his PhD program in Materials Science at Universitat Autònoma de Barcelona. The Center for Nanoscience and Nanotechnology (research supported by the French RENATECH network) and Thomas Maroutian are acknowledged for the growth of the PbZr0.2Ti0.8O3 sample. I.F. acknowledges Ramon y Cajal RYC-2017-22531 funded by Fondo Social Europeo., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non-volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00, PID2020-112914RB-I00 and PID2019-107727RB-I00 projects and from Generalitat de Catalunya (2021 SGR 00804) are acknowledged. The authors also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR, and EU Horizon 2020 programme under the Marie Skłodowska-Curie grant agreement No. 861153 MANIC. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Disentangling stress and strain effects in ferroelectric HfO2

  • Song, Tingfeng
  • Lenzi, Veniero
  • Silva, José P. B.
  • Marques, Luís
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Ferroelectric HfO2 films are usually polycrystalline and contain a mixture of polar and nonpolar phases. This challenges the understanding and control of polar phase stabilization and ferroelectric properties. Several factors such as dopants, oxygen vacancies, or stress, among others, have been investigated and shown to have a crucial role on optimizing the ferroelectric response. Stress generated during deposition or annealing of thin films is a main factor determining the formed crystal phases and influences the lattice strain of the polar orthorhombic phase. It is difficult to discriminate between stress and strain effects on polycrystalline ferroelectric HfO2 films, and the direct impact of orthorhombic lattice strain on ferroelectric polarization has yet to be determined experimentally. Here, we analyze the crystalline phases and lattice strain of several series of doped HfO2 epitaxial films. We conclude that stress has a critical influence on metastable orthorhombic phase stabilization and ferroelectric polarization. On the contrary, the lattice deformation effects are much smaller than those caused by variations in the orthorhombic phase content. The experimental results are confirmed by density functional theory calculations on HfO2 and Hf0.5Zr0.5O2 ferroelectric phases., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917- S), PID2020-112548RB-I00 and PID2019-107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804) and from CSIC through the i-LINK (LINKA20338) program is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. TS is financially supported by China Scholarship Council (CSC) with No. 201807000104. This work was supported by: (i) the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding Contract UIDB/04650/2020; (ii) the exploratory research project 2022.01740.PDTC (DOI:10.54499/2022.01740.PTDC) and (iii) the project M-ERA-NET3/0003/2021 - NanOx4EStor grant agreement No 958174 (DOI:10.54499/M-ERA-NET3/0003/2021). J. P. B. S. also thanks FCT for the contract under the Institutional Call to Scientific Employment Stimulus – 2021 Call (CEECINST/00018/2021). This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Roadmap on ferroelectric hafnia- and zirconia-based materials and devices

  • Silva, José P.B.
  • Alcala, Ruben
  • Avci, Uygar E.
  • Barrett, Nick
  • Bégon-Lours, Laura
  • Borg, Mattias
  • Byun, Seungyong
  • Chang, Sou Chi
  • Cheong, Sang Wook
  • Choe, Duk Hyun
  • Coignus, Jean
  • Deshpande, Veeresh
  • Dimoulas, Athanasios
  • Dubourdieu, Catherine
  • Fina, Ignasi
  • Funakubo, Hiroshi
  • Grenouillet, Laurent
  • Gruverman, Alexei
  • Heo, Jinseong
  • Hoffmann, Michael
  • Hsain, H. Alex
  • Huang, Fei Ting
  • Hwang, Cheol Seong
  • Íñiguez, Jorge
  • Jones, Jacob L.
  • Karpov, Ilya V.
  • Kersch, Alfred
  • Kwon, Taegyu
  • Lancaster, Suzanne
  • Lederer, Maximilian
  • Lee, Younghwan
  • Lomenzo, Patrick D.
  • Martin, Lane W.
  • Martin, Simon
  • Migita, Shinji
  • Mikolajick, Thomas
  • Noheda, Beatriz
  • Park, Min Hyuk
  • Rabe, Karin M.
  • Salahuddin, Sayeef
  • Sánchez Barrera, Florencio
  • Seidel, Konrad
  • Shimizu, Takao
  • Shiraishi, Takahisa
  • Slesazeck, Stefan
  • Toriumi, Akira
  • Uchida, Hiroshi
  • Vilquin, Bertrand
  • Xu, Xianghan
  • Ye, Kun Hee
  • Schroeder, Uwe
Ferroelectric hafnium and zirconium oxides have undergone rapid scientific development over the last decade, pushing them to the forefront of ultralow-power electronic systems. Maximizing the potential application in memory devices or supercapacitors of these materials requires a combined effort by the scientific community to address technical limitations, which still hinder their application. Besides their favorable intrinsic material properties, HfO2-ZrO2 materials face challenges regarding their endurance, retention, wake-up effect, and high switching voltages. In this Roadmap, we intend to combine the expertise of chemistry, physics, material, and device engineers from leading experts in the ferroelectrics research community to set the direction of travel for these binary ferroelectric oxides. Here, we present a comprehensive overview of the current state of the art and offer readers an informed perspective of where this field is heading, what challenges need to be addressed, and possible applications and prospects for further development., Financial support from the Spanish Ministry of Science and Innovation (Grant No. 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (Project No. CEX2019-000917-S funded by MCIN/AEI), Project No. TED2021-130453B-C21 funded by MCIN/AEI and European Union NextGenerationEU/PRTR, and Project Nos. PID2020-112548RB-I00 and PID2019-107727RB-I00 funded by MCIN/AEI, and from Generalitat de Catalunya (Grant No. 2021 SGR 00804) is acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Robust Antiferromagnetic FeRh Films on Mica

  • Quintana, Alberto
  • Zarco, Carlos
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Fontcuberta, Josep
FeRh shows an antiferromagnetic to ferromagnetic phase transition above room temperature, which permits its use as an antiferromagnetic memory element. However, its antiferromagnetic order is sensitive to small variations in crystallinity and composition, challenging its integration into flexible devices. Here, we show that flexible FeRh films of high crystalline quality can be synthesized by using mica as a substrate, followed by a mechanical exfoliation of the mica. The magnetic and transport data indicate that the FeRh films display a sharp antiferromagnetic to ferromagnetic phase transition. Magnetotransport data allow for the observation of two distinguishable resistance states, which are written after a field-cooling procedure. It is shown that the memory states are robust under the application of magnetic fields of up to 10 kOe., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (10.13039/501100011033) through the Severo Ochoa FUNFUTURE (No. CEX2019-000917-S); the TED2021-130453B-C21 (AEI/FEDER, EU), PID2020-118479RB-I00 (AEI/FEDER, EU), PID2020-112548RB-I00 (AEI/FEDER, EU), and PID2019-107727RB-I00 (AEI/FEDER, EU) projects; from Generalitat de Catalunya through 2019 LLAV 00050, 2021 SGR 00445, and 2021 SGR 00804 projects. A.Q. acknowledges the Spanish Ministry of Science, Innovation, and Universities for the Juan de la Cierva Formación Contract (No. FJC2019-039780-I). The work of C.Z. has been done as part of his Bachelor’s Degree in Physics + Bachelor’s Degree in Chemistry at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversible optical control of magnetism in engineered artificial multiferroics

  • Ochoa, Diego A.
  • Menéndez, Enric
  • López-Sánchez, Jesús
  • Campo, Adolfo del
  • Ma, Zheng
  • Spasojević, Irena
  • Fina, Ignasi
  • Fernández, José F.
  • Rubio Marcos, Fernando
  • Sort, Jordi
  • García, José E.
Optical means instead of electric fields may offer a new pathway for low-power and wireless control of magnetism, holding great potential to design next-generation memory and spintronic devices. Artificial multiferroic materials have shown remarkable suitability as platforms towards the optical control of magnetic properties. However, the practical use of magnetic modulation should be both stable and reversible and, particularly, it should occur at room temperature. Here we show an unprecedented reversible modulation of magnetism using low-intensity visible-light in Fe75Al25/BaTiO3 heterostructures, at room temperature. This is enabled by the existence of highly oriented charged domain walls arranged in arrays of alternating in-plane and out-of-plane ferroelectric domains with stripe morphology. Light actuation yields a net anisotropic stress caused by ferroelectric domain switching, which leads to a 90-degree reorientation of the magnetic easy axis. Significant changes in the coercivity and squareness ratio of the hysteresis loops can be light-modulated, encouraging the development of novel low energy-consumption wireless magneto-optical devices., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00, PID2020-116844RB-C21, PID2019-107727RB-I00, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, and PID2020-114192RB-C41 projects program, from Generalitat de Catalunya (2021 SGR 00804 and 2021 SGR 00651), the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant No. 101054687) and MCIN/AEI/10.13039/501100011033 & “European Union NextGenerationEU/PRTR” (Grant CNS2022-135230) is acknowledged. We also acknowledge projects TED2021-130453B-C21, TED2021-130453B-C22 and TED2021-130957B-C51, funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/50110001103). E. M. is a Serra-Húnter fellow. F. R.-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund. J. L.-S. acknowledges the financial support from MCIN for the “Ramón y Cajal” contract RYC2022-035912-I, funded by the European Social Fund Plus. The authors also acknowledge the provision of the SpLine CRG BM25 beamline under the project MA-5601 at the European Synchrotron Radiation Facility (ESRF). Dr Juan Rubio-Zuazo and Mr Carlos Beltrán-Hernando are acknowledged for their assistance with the synchrotron XRD measurements., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photovoltaic-driven dual optical writing and non-destructive voltage-less reading of polarization in ferroelectric Hf0.5Zr0.5O2 for energy efficient memory devices

  • Tan, Huan
  • Quintana, Alberto
  • Dix, Nico
  • Estandía, Saul
  • Sort, Jordi
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Ferroelectric doped hafnium oxide constitutes, at present, an intensively investigated candidate material to develop outperforming non-volatile memory devices. We report reading and writing of the ferroelectric polarization with light in Hf0.5Zr0.5O2/Nb:SrTiO3 structures, where light is absorbed at the interface between the two materials, thereby enabling both processes. Reading of ferroelectric polarization is accomplished through the induced short-circuit photocurrents, which is a pathway towards voltage-less-non-destructive reading. Optical writing allows remote and contact-less switching of ferroelectric polarization, without the need for external voltages. The presence or absence of a Pt capping layer is crucial for the aforementioned read/write operations. If top Pt is present, photocarriers flow, resulting in short-circuit photocurrent, whose magnitude is modulated by the induced depolarization field. Instead, if Pt is removed, photocarriers are accumulated at the top surface, eventually producing an optically induced switching of polarization, as revealed by piezoelectric force microscopy observations. These results are highly appealing for the design of novel energy-efficient ferroelectric memory devices actuated with light., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/ 10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019–000917-S), PID2023-147211OB-C21, PID2020–112548RB-I00, PID2020–116844RB-C21 and PID2019–107727RB-I00 projects program, from Generalitat de Catalunya (2021 SGR 00804 and 2021 SGR 00651) and the European Research Council (2021-ERC-Advanced ‘REMINDS’ Grant Nº 101054687) is acknowledged. We also acknowledge projects TED2021–130453B-C21 and TED2021–130453B-C22, funded by MCIN/AEI/10.13039/50110001103. HT is financially supported by China Scholarship Council (CSC) with no. 201906050014. The work of HT has been done as part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. Francesc Xavier Campos is acknowledged for indispensable assistance during XRD characterization. Prof. David Jimenez is acknowledged for assisting us on data analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low oxidation conditions in pulsed laser deposition enhance polarization without degradation of endurance and retention in Hf0.5Zr0.5O2 films

  • Ali, Faizan
  • Song, Tingfeng
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Interplay between oxygen vacancies and the stabilization of the ferroelectric orthorhombic phase in doped HfO2, as well as the resulting impact on endurance and retention, is far from being well understood. In Hf0.5Zr0.5O2 (HZO) thin films, it is commonly found that high polarization occurs usually at the the expense of robustness upon cycling due to the polarization-endurance dilemma. It has been reported that HZO thin films grown by pulsed laser deposition under the mixed Ar and O2 atmosphere exhibit a high polarization. Here, we show that this strategy enables functional properties tuning, allowing to obtain HZO films with high polarization at low oxidation conditions without degradation of endurance and retention., Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa FUNFUTURE (CEX2019-000917-S), PID2020-112548RB-I00 and PID2019-107727RB-I00, and from Generalitat de Catalunya (2021 SGR 00804) projects is acknowledged. We also acknowledge Projects TED2021-130453B–C21, PID2023-147211OB-C21, and PDC2023-145874-I00, funded by MICIU/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR. F.A. acknowledges Juan de la Cierva–formación Contract FJC2020-043023-I. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ionic control of magnetism in all-solid-state CoO<inf>x</inf>/yttria-stabilized zirconia heterostructures

  • Ma, Zheng
  • Tan, Zhengwei
  • Quintana, Alberto
  • Spasojevic, Irena
  • López Pintó, Nicolau
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
  • Herrero Martín, Javier
  • Menéndez, Enric
  • Sort, Jordi
Magneto-ionic gating, a procedure that enables the modulation of materials' magnetic properties by voltage-driven ion motion, offers alternative perspectives for emerging low-power magnetic storage and spintronic applications. Most previous studies in all-solid-state magneto-ionic systems have focused on the control of interfacial magnetism of ultrathin (i.e., 1-3 nm) magnetic films, taking advantage of an adjacent ionic conducting oxide, usually GdOx or HfOx, that transports functional ionic species (e.g., H+ or O2−). Here, we report on room-temperature OFF-ON ferromagnetism by solid-state magneto-ionics in relatively thick (25 nm) patterned CoOx films grown on an yttria-stabilized zirconia (YSZ) layer, which acts as a dielectric to hold electric field and as an O2− ion reservoir. Upon negatively biasing, O2− ions from the CoOx tend to migrate toward the YSZ gate electrode, leading to the gradual generation of magnetization (i.e., OFF-to-ON switching of a ferromagnetic state). X-ray absorption and magnetic circular dichroism studies reveal subtle changes in the electronic/chemical characteristics, responsible for the induced magnetoelectric effects in such all-oxide heterostructures. Recovery of the initial (virtually non-magnetic) state is achieved by application of a positive voltage. The study may guide future development of all-solid-state low-power CMOS-compatible magneto-ionic devices., Financial support by the European Union's Horizon 2020 Research and Innovation Programme (BeMAGIC European Training Network, ETN/ITN Marie Skłodowska–Curie Grant No. 861145), the European Research Council (2021-ERC-Advanced REMINDS Grant No. 101054687), the Generalitat de Catalunya (Nos. 2021-SGR-00651 and 2021 SGR 00804), and the Spanish Government (Nos. PID2020-112548RB-I00, PID2020-116844RB-C21, PDC2021-121276-C31, PID2019-107727RB-I00, PID2023-147211OB-C21, TED2021-130453B-C21, and TED2021-130453B-C22, and the MCIN/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” Grant No. CNS2022-135230) are acknowledged. The XAS/XMCD experiments were performed at BL29-BOREAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. E.M. is a Serra Húnter Fellow., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switching dynamics and improved efficiency of free-standing antiferroelectric capacitors

  • Saeed, Umair
  • Pesquera, David
  • Liu, Ying
  • Fina, Ignasi
  • Ganguly, Saptam
  • Santiso, José
  • Padilla, Jessica
  • Caicedo, José Manuel
  • Liao, Xiaozhou
  • Catalán, Gustau
27 pages, 7 Figures, Supplementary material, We report the switching dynamics of antiferroelectric Lead Zirconate (PbZrO3) free standing capacitors compared to their epitaxial counterparts. Frequency dependence of hysteresis indicates that freestanding capacitors exhibit a lower dispersion of switching fields, lower residual polarization, and faster switching response as compared to epitaxially-clamped capacitors. As a consequence, freestanding capacitor membranes exhibit better energy storage density and efficiency., This project was funded by Grant PID2019-108573GB-C21 (FOx-Me) funded by the Spanish Ministry of Science and Innovation (DOI: 10.13039/501100011033), and by grant N° 964931 (TSAR, https://doi.org/10.3030/964931) from the European Union's Horizon 2020 research and innovation program. Financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), through the TED2021-130453B-C21, PDC2023-145874-I00 and PID2023-147211OB-C21 projects and from Generalitat de Catalunya (2021 SGR 00804) are acknowledged. Y.L. acknowledges the BIST Postdoctoral Fellowship Programme (PROBIST) funded by the European Union's Horizon 2020 research and innovation programme, under the Marie Sklodowska-Curie grant agreement No. 754510. D.P. acknowledges funding from “la Caixa” Foundation fellowship (ID 100010434). The authors are grateful for the scientific and technical support from the Australian Centre for Microscopy and Microanalysis as well as the Microscopy Australia node at the University of Sydney., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unfolding the Challenges To Prepare Single Crystalline Complex Oxide Membranes by Solution Processing

  • Sallés, Pol
  • Guzmán, Roger
  • Tan, Huan
  • Ramis, Martí
  • Fina, Ignasi
  • Machado, Pamela
  • Sánchez Barrera, Florencio
  • Luca, Gabriele de
  • Zhou, Wu
  • Coll, Mariona
The ability to prepare single crystalline complex oxide freestanding membranes has opened a new playground to access new phases and functionalities not available when they are epitaxially bound to the substrates. The water-soluble Sr3Al2O6 (SAO) sacrificial layer approach has proven to be one of the most promising pathways to prepare a wide variety of single crystalline complex oxide membranes, typically by high vacuum deposition techniques. Here, we present solution processing, also named chemical solution deposition (CSD), as a cost-effective alternative deposition technique to prepare freestanding membranes identifying the main processing challenges and how to overcome them. In particular, we compare three different strategies based on interface and cation engineering to prepare CSD (00l)-oriented BiFeO3 (BFO) membranes. First, BFO is deposited directly on SAO but forms a nanocomposite of Sr-Al-O rich nanoparticles embedded in an epitaxial BFO matrix because the Sr-O bonds react with the solvents of the BFO precursor solution. Second, the incorporation of a pulsed laser deposited La0.7Sr0.3MnO3 (LSMO) buffer layer on SAO prior to the BFO deposition prevents the massive interface reaction and subsequent formation of a nanocomposite but migration of cations from the upper layers to SAO occurs, making the sacrificial layer insoluble in water and withholding the membrane release. Finally, in the third scenario, a combination of LSMO with a more robust sacrificial layer composition, SrCa2Al2O6 (SC2AO), offers an ideal building block to obtain (001)-oriented BFO/LSMO bilayer membranes with a high-quality interface that can be successfully transferred to both flexible and rigid host substrates. Ferroelectric fingerprints are identified in the BFO film prior and after membrane release. These results show the feasibility to use CSD as alternative deposition technique to prepare single crystalline complex oxide membranes widening the range of available phases and functionalities for next-generation electronic devices., This work was funded by CEX2023-001263-S/MCIN/AEI/10.13039/501100011033, PID2020-114224RB-I00/AEI/10.13039/501100011033, PID2019-107727RB-I00/AEI/10.13039/501100011033, TED2021-130402B–I00, and TED2021-130453B c21/MCIN/AEI/10.13039/501100011033 European Union “NextGenerationEU”/“PRTR”. We also acknowledge the financial support from the National Key RD Program of China (2018YFA0305800), and the Beijing Outstanding Young Scientist Program (BJJWZYJH01201914430039). This research benefited from resources and supports from the Electron Microscopy Center at the University of Chinese Academy of Sciences. The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434) LCF/BQ/DI19/11730026. P.M. acknowledges the FPI fellowship (PRE2018-084618 MCIN/AEI/10.13039/5011000011033). The authors are grateful to I. Caño for the assistance in thin film preparation and to the Thin Film Deposition Scientific Service at ICMAB-CSIC. G.D.L. acknowledges grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. This work has been done in the framework of the doctorate in material science of the Autonomous University of Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin-orbit entanglement driven by the Jahn-Teller effect

  • Miñarro, Alejandro S.
  • Villa, Mario
  • Casals, Blai
  • Plana Ruiz, Sergi
  • Sánchez Barrera, Florencio
  • Gázquez, Jaume
  • Herranz, Gervasi
Spin-orbit entanglement in 4d and 5d transition metal systems can enhance electronic correlations, leading to nontrivial ground states and the emergence of exotic excitations. There is also an interest to investigate spin-orbit entanglement in 3d compounds, though this is challenging due to their smaller spin-orbit coupling. Here we demonstrate that the Jahn-Teller effect in Mn3+ reduces the energy gap between high- and low- spin-orbital states that lead to enhanced spin-orbit entanglement. Our results show a rare example of synergistic effects of Jahn-Teller and spin-orbit interactions and provide a way to entangle different degrees of freedom in d-metal oxides, which may allow paths to explore the interplay of orbital, lattice and spins in 3d correlated systems., We acknowledge financial support from Projects No. PID2023-152225NB-I00, PID2023-147211OB-C21, PID2020-118479RBI00, PID2020-112548RB-I00, and Severo Ochoa MATRANS42 (No. CEX2023-001263-S) of the Spanish Ministry of Science and Innovation (Grant No. MICIU/AEI/10.13039/501100011033 and FEDER, EU)"), Projects No. TED2021-129857B-I00 and TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR and by the Generalitat de Catalunya (2021 SGR 00445, 2021 SGR 00804). We thank the X-ray Diffraction Laboratory at ICMAB-CSIC for their assistance in X-ray diffraction reciprocal space maps. We thank Gyanendra Singh for his participation in formatting some of the figures of the main text. EM02-METCAM at ALBA and ICTS-CNME at UCM are acknowledged for offering access to STEM microscopy and expertise. The authors acknowledge the TEM facilities of the Scientific & Technical Resources Service (SRCiT) from Universitat Rovira i Virgili where the TEM was partially funded by the operative program FEDER Catalunya 2014-2020 (IU16-015844)., info:eu-repo/grantAgreement/AEI/Plan Estatal de investigación Científica y Técnica y de Innovación 2021-2023/CEX2023-001263-S, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFe0.9Co0.1O3 Thin Films

  • Machado, Pamela
  • Salles, Pol
  • Frebel, Alexander
  • Luca, Gabriele de
  • Ros, Eloi
  • Hagendorf, Christian
  • Fina, Ignasi
  • Puigdollers, Joaquim
  • Coll, Mariona
Photoferroelectric BiFeO3 (BFO) has attracted renewed interest to be integrated into thin film photovoltaic (PV) devices as a stable, lead-free, and versatile photoabsorber with simplified architecture. While significant efforts have been dedicated toward the exploration of strategies to tailor the properties of this photoabsorber to improve the device performance, efficiencies still remain low. The modification of the BFO interface by the incorporation of transport-selective layers can offer fresh opportunities to modify the properties of the device. Identifying an optical and electrically suitable selective layer while ensuring easy device processing and controlled film properties is challenging. In this work, we determine the influence of incorporating a ZnO layer on the ferroelectric and photoresponse behavior of an epitaxial BiFe0.9Co0.1O3 (BFCO)-based heterostructure. The device is completed with Sn-doped In2O3 (ITO) and La0.7Sr0.3MnO3 (LSMO) electrodes. This all-oxide system is stable under ambient conditions and displays robust ferroelectricity. The coupled ferroelectricity-photoresponse measurements demonstrate that the short circuit current can be modulated by ferroelectric polarization in up to 68% under blue monochromatic light. Also, the responsivity of the system with the ZnO-modified interface is larger than that of the system with no ZnO. Complementary band energy alignment studies reveal that the observed increase in the short circuit current density of the device with ZnO is attributed to lower Fermi level energy at the ZnO/BFCO interface compared to the ITO/BFCO interface, which reduces charge recombination. Therefore, this study provides useful insights into the role of the ZnO interface layer in stable BFO-based devices to further explore their viability for potential optoelectronic applications., This work was funded by CEX2023-001263-S/AEI/10.13039/501100011033, PID2020-535 114224RB-I00/AEI/10.13039/501100011033, PID2019-536 107727RB-I00/AEI/10.13039/501100011033. The authors also acknowledge projects TED2021-130402B-I00 and TED2021-130453B-C21 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. The authors acknowledge Prof. Josep Fontcuberta for fruitful scientific discussions on the photoferroelectric behavior of BFCO heterostructures and Prof. Andreas Klein for his advice on XPS data acquisition and energy band alignment interpretation. Dr. G. Sauthier is also acknowledged for the support in the XPS measurements. P.M. and P.S. acknowledge financial support from the FPI fellowship (PRE2018-084618) and from the “la Caixa” Foundation LCF/BQ/DI19/11730026 fellowship. The work of P.M. and P.S. has been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona. G.D.L. acknowledges funding from the Swiss National Science Foundation (SNSF) under Project No. P2EZP2-191865 and grant RYC2021-032524-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU”/PRTR. G.D.L also acknowledges Prof. G. Catalan for the use of the off-axis sputtering system., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Fundamentals of Flexoelectricity, Materials and Emerging Opportunities Toward Strain-Driven Nanocatalysts

  • Kołodziej, Mieszko
  • Ojha, Niwesh
  • Budziałowski, Michał
  • Załęski, Karol
  • Fina, Ignasi
  • Mishra, Yogendra Kumar
  • Pant, Kamal Kishore
  • Coy, Emerson
Flexoelectricity, an intrinsic property observed in materials under nonuniform deformation, entails a coupling between polarization and strain gradients. Recent catalyst advancements have reignited interest in flexoelectricity, particularly at the nanoscale, where pronounced strain gradients promote robust flexoelectric effects. This paper comprehensively examines flexoelectricity, encompassing methodologies for precise measurement, elucidating its distinctions from related phenomena, and exploring its potential applications in augmenting catalytic properties. So far, the greatest potentials are based on lead strontium titanate (PST) and other metallic titanates such as titania (TiO2), strontium titanate (STO), barium strontium titanate (BST) sulfates (MoS2, ZnS) and halide perovskites (with archetype XPbI3). This review explores the promise of flexoelectric properties in addressing material and photocatalytic challenges, such as charge carrier recombination and ineffective surface charge separation. Additionally, it sheds light on the synergy with emerging paradigms like photo-flexo catalysis and synergistic flexo-piezo catalysis, specifically focusing on selective chemical transformations like green hydrogen production. Current limitations related to the usage of photoflexoelectricity for photocatalysis are mostly the stability of the used substance (susceptibility to photodegradation) or the voltage values, which represent the inferior potential for specific practical applications. This work underscores the indispensable role of flexoelectricity in catalysis and its capacity to steer future research and technological advancement., M.K. and N.O. contributed equally to this work. The authors thank the financial funding from the National Science Foundation of Poland (NCN) by the SONATA Grant UMO-2021/43/D/ST5/01116. N.O. thanks the DST Inspire Faculty Fellowship (Grant DST/INSPIRE/04/2022/002668) for financial support and the Department of Chemical Engineering Indian Institute of Technology Roorkee for hosting. Y.K.M. acknowledges the funding from the NANOCHEM (national infrastructure UFM 5229-00010B, NANOCHEM, Denmark), BHJ Fonden and Fabrikant Mads Clausen Fonden, Denmark. I.F. acknowledges the project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/50110001103. The authors also thank the editors and reviewers for their constructive comments, which help the manuscript insights., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magneto-ionic vortices: voltage-reconfigurable swirling-spin analog-memory nanomagnets

  • Spasojevic, Irena
  • Ma, Zheng
  • Barrera, Aleix
  • Celegato, Federica
  • Magni, Alessandro
  • Ruiz Gómez, Sandra
  • Foerster, Michael
  • Palau, Anna
  • Tiberto, Paola
  • Buchanan, Kristen S.
  • Sort, Jordi
Rapid progress in information technologies has spurred the need for innovative memory concepts, for which advanced data-processing methods and tailor-made materials are required. Here we introduce a previously unexplored nanoscale magnetic object: an analog magnetic vortex controlled by electric-field-induced ion motion, termed magneto-ionic vortex or "vortion". This state arises from paramagnetic FeCoN through voltage gating and gradual N3- ion extraction within patterned nanodots. Unlike traditional vortex states, vortions offer comprehensive analog adjustment of key properties such as magnetization amplitude, nucleation/annihilation fields, or coercivity using voltage as an energy-efficient tuning knob. This manipulation occurs post-synthesis, obviating the need for energy-demanding methods like laser pulses or spin-torque currents. By leveraging an overlooked aspect of N3- magneto-ionics-planar ion migration within nanodots-precise control of the magnetic layer's thickness is achieved, which enables reversible transitions among paramagnetic, single-domain, and vortion states, offering future prospects for analog computing, multi-state data storage, or brain-inspired devices., This work has been supported by the European Research Council (2021-ERC-Advanced REMINDS Grant N° 101054687, awarded to J.S.). J.S. acknowledges partial financial support from the Generalitat de Catalunya (2021-SGR-00651) and the Spanish Government (PID2020-116844RB-C21 and TED2021-130453B-C22). PID2021-124680OB-I00 funded by MCIN/AEI/10.13039/501100011033, ERDF “A way of making Europe”, Severo Ochoa MaTrans42 (CEX2023-001263-S), EU COST action SUPERQUMAP (CA21144) and Nanolito RED2022-134096-T are acknowledged by A.P. A.B. acknowledges support from MICIN Predoctoral Fellowship (PRE2019-09781). K.S.B. acknowledges support from the W.M. Keck Foundation. M.F. acknowledges funding from MICIN under grant PID2021-122980OB-C54. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat de Catalunya. We thank Dr. Cristina Navarro-Senent for her assistance with the graphical design., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cooperative Effects of Interface Symmetry, Redox Conditions and Low-Thickness to Improve Polarization in Ferroelectric Hf0.5Zr0.5O2 Films

  • Lyu, Xueliang
  • Ali, Faizan
  • Song, Tingfeng
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
The ferroelectric phase of hafnia is metastable, and its stabilization is achieved by appropriate doping and generally only in ultrathin films where the contribution of surface energy is relevant. Other factors, such as interfaces and point defects such as oxygen vacancies, can affect the formation energy of competing polymorphs. Understanding the role of these factors is important to achieve further control over the stabilized phases and, thereby, improve ferroelectric polarization. To gain insight into the role of defects and stress at interfaces, we have compared a series of Hf0.5Zr0.5O2 epitaxial films of various thicknesses. The films were grown on (001) and (110) oriented SrTiO3 substrates to impose different symmetries at the interface and were deposited in a pure O2 or a mixed O2/Ar atmosphere to vary the oxidation conditions. We find that both factors are critical, with polarization maximized in films on (110)-oriented substrates and prepared under reducing conditions. Irrespective of the used substrate and atmosphere, polarization rapidly decays for thicknesses above 10 nm, indicating the relevance of the surface energy. Strain is thickness dependent, varying differently depending on the substrate orientation, but not on the deposition conditions investigated. Strain-thickness and polarization-thickness dependencies are not correlated, signaling that strain does not have a direct influence on the ferroelectricity of the films. Thickness, oxidation conditions, and epitaxial stress can contribute synergistically, and films with an optimal selection of these parameters have the ferroelectric polarization expected for pure orthorhombic phase films., Grants PID2023-147211OB-C21, Severo Ochoa (CEX2023-001263-S), PDC2023-145874-I00, PID2020-112548RB-I00, TED2021-130453B-C21, and PID2019-107727RB-I00, funded by MCIN/AEI/10.13039/501100011033 and grant 2021 SGR 00804 funded by Generalitat de Catalunya, are acknowledged. This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101168161 (MASAUTO European Training Networks). X.L. and T.S. are financially supported by the China Scholarship Council (CSC) with No. 202206180011 and 201807000104, respectively. X.L.’s work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulated photovoltaic response in a flexoelectric device using microscopic indentation

  • Coy, Emerson
  • Załęski, Karol
  • Budziałowski, Michal
  • Zou, Jingye
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
The use of ferroelectric materials in photovoltaics has garnered significant attention due to the presence of a giant open circuit voltage response. In addition, while flexoelectric effects are known to contribute to the magnitude and direction of internal electric fields, they have yet to be exploited in a controllable and permanent way in devices. In this study, we employ microscopic indentation in photovoltaic capacitor devices based on an archetypal ferroelectric material, that is, BaTiO<inf>3</inf>. Our findings reveal that the applied indentation force can modulate the internal electric fields via flexoelectric effects. However, this comes with increased device conductivity, which indicates the unavoidable presence of an increased number of defects. Importantly, this modulation is accompanied by a tunable photovoltaic response. These results suggest that indentation offers a novel approach to engineer devices with an enhanced photoresponse., Financial support from the Spanish Ministry of Science, Innovation and Universities (Grant No. MCIN/AEI/10.13039/501100011033), through the Severo Ochoa (Grant No. CEX2023-001263-S), Grant Nos. PDC2023-145874-I00, PID2020-112548RB-I00, PID2023-147211OB-C21, and PID2019-107727RB-I00 projects program and from Generalitat de Catalunya (Grant No. 2021 SGR 00804) is acknowledged. We also acknowledge Project No. TED2021-130453B-C21, funded by Grant No. MCIN/AEI/10.13039/501100011033. The Financial support from the National Science Center of Poland (NCN) in the Grant SONATA (Grant No. UMO-2021/43/D/ST5/01116) is acknowledged. The authors also thank Dr. Piotr Graczyk – from Adam Mickiewicz University for his technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Yttrium: A highly efficient dopant for ferroelectric HfO2

  • Ghiasabadi Farahani, Mehrdad
  • Magén, César
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
The ferroelectric phase of HfO2 is metastable, and its stabilization in thin films strongly depends on both doping and microstructure. Optimally doped films exhibit high ferroelectric polarization; however, it typically decreases rapidly with increasing film thickness. In contrast to these usual results, a few exceptions report ferroelectricity in thick films with specific dopants, such as Y or La, crystallized under conditions that favor granular microstructure. Disentangling the roles of microstructure and doping on the thickness-dependent stability of ferroelectricity remains essential, and identifying highly effective dopant atoms is of high relevance. In this work, Y-doped epitaxial films of various thicknesses up to about 100 nm are prepared to determine phase evolution and ferroelectric polarization. Films deposited on SrTiO3(001) and SrTiO3(110) substrates exhibit robust ferroelectric response across the entire thickness range, in contrast to equivalent La-doped films. Coexistence of monoclinic (paraelectric) and orthorhombic (ferroelectric) phases is observed, with columnar grains revealed by scanning transmission electron microscopy, demonstrating that the microstructure of epitaxial HfO2 films can be preserved beyond 10 nm. The observed columnar grain structure indicates that the robustness of ferroelectricity in Y-doped films results from the high effectiveness of Y, supporting its use in devices requiring thick ferroelectric layers., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa program (CEX2023-001263-S and CEX2023-001286-S), PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, TED2021-130453B-C21, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects, from Gobierno de Aragon project E13_23R, including FEDER funding, and from Generalitat de Catalunya (2021 SGR 00804) is acknowledged. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intrinsic Ferroelectric Polarization in Doped HfO2 and ZrO2

  • Lyu, Xueliang
  • Zou, Jingye
  • Ali, Faizan
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Fluorite ferroelectrics based on HfO2 and ZrO2 hold great potential for efficient memory devices. For these applications, it is of interest to control and maximize the remanent polarization. The literature shows a strong dispersion of polarization values for the same chemical composition. The measured values can include distinct contributions, and indeed, HfO2 and ZrO2 present prominent ionic transport, in addition to electronic processes. This can cause the genuine ferroelectricity of fluorites to be superimposed on extrinsic contributions, leading to the erroneous estimation of polarization. This possibility has a major impact, as it can seriously affect the system's understanding, hampering progress. To disclose genuine ferroelectricity, a comprehensive study of hafnium and zirconium oxide films is conducted. High-quality epitaxial films are prepared with different Hf1-xZrxO2 compositions, ranging from HfO2 to ZrO2, and using different deposition parameters and substrate orientation to vary defects and interfaces. There is resistive switching, especially in ZrO2 films, which results in hysteretic current and induces a considerable overestimation of the polarization in films with high leakage current levels. It is demonstrated that a critical evaluation of extrinsic contributions is necessary, especially when abnormally shaped polarization loops or anomalously high polarization values are measured., Grants PID2023-147211OB-C21, Severo Ochoa (CEX2023-001263-S), PDC2023-145874-I00, PID2020-112548RB-I00, TED2021-130453B-C21 and PID2019-107727RB-I00 funded by the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033) were acknowledged. Grant 2021 SGR 00804 funded by Generalitat de Catalunya was also acknowledged. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 101168161 (MASAUTO European Training Networks). The authors acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Thin Films Laboratory (Raúl Solanas and Victor Castro) and X-Ray Diffraction Laboratory (Anna Crespi, Xavier Campos and Joan Esquius). X.L. was financially supported by China Scholarship Council (CSC) with No. 202206180011, and his work has been done as a part of his Ph.D. program in Materials Science at Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Decoupling Magnetic and Electric Field Control in Magneto-Ionic Materials for Energy-Efficient Brain-Inspired Memory Devices

  • Martínez Armesto, Luis
  • Ma, Zheng
  • Tan, Huan
  • Pellicer, Eva
  • Spasojević, Irena
  • Sort, Jordi
Magneto-ionic materials, which enable nonvolatile control of magnetism through voltage-driven ion migration, are emerging as promising candidates for neuromorphic computing. Unlike conventional memristors, these systems allow dual actuation by both electric and magnetic fields, providing a broader range of functional capabilities. The reliance on voltage rather than current significantly reduces Joule heating and enhances the energy efficiency. However, the general need for external magnetic fields to modulate the voltage-induced magnetic response remains a key limitation, undermining the full energy-saving potential of these systems. In this work, we present a magneto-ionic strategy in CoFeN that fully decouples the electric and magnetic field requirements. By taking advantage of a planar N3– ion migration and the ferromagnetic exchange interactions between preexisting and newly generated CoFe magnetic regions, we achieve remanent-state magnetization control solely through applied voltage. The system exhibits behaviors reminiscent of neuromorphic-inspired functionalities, such as synaptic potentiation and depression, while also exhibiting a cumulative voltage-driven increase in magnetization in the absence of a magnetic field. Once the magnetic field is switched off, synaptic weight remains influenced by both the sample’s magnetic and electric history. By eliminating the need for magnetic fields, our approach contributes to reduce energy consumption, offering a more efficient pathway for brain-inspired magneto-ionic devices., Financial support from the European Research Council (2021-ERC-Advanced “REMINDS” no. 101054687, and 2024-ERC-Proof of Concept “SECURE-FLEXIMAG” Grant no. 101204328), the Generalitat de Catalunya (2021-SGR-00651), and the Spanish Agencia Estatal de Investigación (PID2020-116844RB-C21 and TED2021-130453B–C22) is acknowledged. The authors acknowledge the use of instrumentation financed through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF) with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is funded by the CERCA program/Generalitat de Catalunya and is also supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, a grant funded by MCIU/AEI/10.13039/501100011033. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interface engineering using multiple La-Doped HfO2 epitaxial subnanolayers to improve the ferroelectric properties of Hf0.5Zr0.5O2 films

  • Ghiasabadi Farahani, Mehrdad
  • Song, Tingfeng
  • Magén, César
  • Zou, Jingye
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
The fabrication of ferroelectric multilayer systems based on hafnia represents a promising approach for achieving high-performance ferroelectric devices. Electrical cycling instability is, in this regard, a key barrier to commercialization. Here, we report on the incorporation of La:HfO2 subnanolayers into an epitaxial Hf0.5Zr0.5O2 film, forming multilayer heterostructures. Ferroelectric properties of multilayers are compared with single-layer structures. We observe that wake-up and fatigue are not present up to 105 cycles in the multilayers. The improved stability is enabled by the ≈25% reduction of coercive field together with the lower leakage resulting from the columnar microstructure throughout the entire thickness without phase discontinuity at interfaces and negligible presence of structural defects. This improvement on endurance response is obtained while the polarization is maintained in comparison with single Hf0.5Zr0.5O2 films; there is negligible loss of the polarization throught time and there is a fast response time lower than 100 ns, limited by the measurement circuit. In addition, dielectric permittivity and large resistive switching up to 108%, not related to the ferroelectric response, are also observed. These findings underscore multilayer architecture as an interesting approach to improve properties while also showing that careful selection of interlayer composition is critical to improve device performance., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 (CEX2023-001263-S) and CEX2023-001286-S, PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, TED2021-130453B-C21, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects and from Generalitat de Catalunya (2021 SGR 00804), and from Gobierno de Aragon Project E13_23R, including FEDER funding, is acknowledged. We also acknowledge project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/501100011033. T.S. is financially supported by China Scholarship Council (CSC) with No. 201807000104. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. We acknowledge the assistance of the ICMAB-CSIC Scientific & Technical Services: Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius, and Francisco Javier Campos)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of epitaxial stress on temperature-dependent ferroelectric endurance of Hf0.5Zr0.5O2 from cryogenic to ambient conditions

  • Adkins, Joshua. W.
  • Kumari, Suman
  • Gage, Thomas
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Herein, we describe a comparative study of the ferroelectric properties of epitaxial Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> films grown on La<inf>0.67</inf>Sr<inf>0.33</inf>MnO<inf>3</inf>/SrTiO<inf>3</inf> (100) and La<inf>0.67</inf>Sr<inf>0.33</inf>MnO<inf>3</inf>/DyScO<inf>3</inf> (110) across a temperature range of 32-298 K for the purpose of assessing the influence of epitaxial stress on material behavior. Despite the nearly 300% greater in-plane strain in the LSMO layer on DSO (110) than STO (100), strain in the HZO layer was minimal. The absence of strain propagation into the HZO film via LSMO is the result of domain matching epitaxy, in which the conventional strain induced by differences in the lattice parameters of HZO and LSMO is compensated and minimized by the generation of periodic integer multiples of HZO and LSMO planes matched along the interface of the two materials. However, epitaxial stress present during growth modifies the stability of the orthorhombic and monoclinic phases in the films, and produces differences in observed variable-temperature ferroelectric behavior. The HZO film grown on LSMO-buffered DSO (110) exhibits 20% greater remanent polarization than its LSMO-buffered STO (100) counterpart due to its enhanced orthorhombic phase volume and also experiences a smaller polarization-based wake up effect. The defect migration-mediated variable-temperature wake-up characteristics of both films, which manifest as pinched hysteresis loops at low temperatures, are comparable. Slight differences in the variable-temperature fatigue characteristics of the films suggest subtle electronic dissimilarities between HZO/LSMO/STO (100) and HZO/LSMO/DSO (110), which can also be explained by slight differences in domain pinning behavior due to differences in polar phase volume present in these films. Our findings provide insight into the influence of epitaxial stress on the behavior of HZO, which should prove useful for researchers aiming to utilize mismatch strain-based methods of introducing structural modifications for enhanced functionality and understanding material behavior in epitaxial HZO films., J W Adkins acknowledges financial support from the University of Illinois Chicago Bridge to Faculty program. Grants PID2023-147211OB-C21, Severo Ochoa (CEX2023-001263-S), PDC2023-145 874-I00, PID2020-112548RB-I00, TED2021-130453B-C21 and PID2019-107727RB-I00 funded by MCIN/AEI/ 10.13039/501 100 011 033 and grant 2021 SGR 00804 funded by Generalitat de Catalunya are acknowledged. Electronic measurements at Argonne National Laboratory were supported by the US. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The use of the Center for Nanoscale Materials (CNM) for transmission electron microscopy was supported by the US. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. X-ray diffraction was conducted using instrumentation provided by the University of Illinois Chicago Research Resources Center and the UIC College of Engineering’s Nanotechnology Core Facility. Transmission electron microscopy was conducted at Argonne National Laboratory’s CNM., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronically Driven Magnetoelectric Coupling in Co/La:Hf0.5Zr0.5O2 Heterostructures for Energy-Efficient Neuromorphic Computing

  • Quintana, Alberto
  • Magén, César
  • Ghiasabadi Farahani, Mehrdad
  • Dong, Wenjing
  • Zou, Jingye
  • Dix, Nico
  • Ma, Zheng
  • Menéndez, Enric
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Cazorla, Claudio
  • Sort, Jordi
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Magnetoelectric materials enable low-power memory devices by leveraging the electric control of magnetization. The discovery of ferroelectricity in doped hafnia has unlocked further opportunities since the distinct ferroelectric switching mechanism in this material can enable robust and multilevel modulation of magnetization by electric field, if combined with appropriate magnetic materials. Here, we demonstrate a 5% electric field-induced modulation of the saturation magnetization in a cobalt layer, driven by ferroelectric switching of an adjacent epitaxial La(1%):Hf0.5Zr0.5O2 film. Dichroic imaging with synchrotron radiation confirms that ferroelectric switching induces a magnetic change. We show that the response time is faster than 500 ns (limited by the setup time resolution threshold) and that energy consumption is 6 nJ. This low energy consumption is mainly enabled by the absence of relevant leakage current contribution (10 nA/cm2 at 500 mV). The found response time and energy-efficient behavior point to the presence of an electronically driven modulation of magnetism (i.e., conventional magnetoelectric effects), which is confirmed by theoretical calculations and compositional analysis. Additionally, a multilevel magnetoelectric response is observed, enabling neuromorphic-like behavior. The demonstration of magnetoelectric coupling in a system based on CMOS-compatible materials offers a viable route toward the development of low-power beyond von-Neumann technologies., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 (CEX2023-001263-S), CEX2023-001286-S, PDC2023-145874-I00, PID2023-147211OB-C21, PID2023-147211OB-C22, PID2021-122980OB-C54, PID2024-156385OB-I00, TED2021-130453B-C21, TED2021-130453B-C22, PID2020-112548RB-I00, PID2020-112914RB-I00, and PID2019-107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804, 2021-SGR-00651), and from Gobierno de Aragon (E13_23R) is acknowledged. This work has also received funding from the European Union NextGenerationEU/PRTR (grant No. CNS2022-135230) and from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 101168161 (MASAUTO European Training Networks). Financial support by the European Research Council (2021-ERC-Advanced REMINDS Grant No. 101054687) is also acknowledged. M.G.F. is financially supported by Spanish Ministry of Science and Innovation with FPI2021 PRE2021-098067 fellowship funded by Fondo Social Europeo. W.D. is financially supported by China Scholarship Council (CSC) with No. 202208310089. W.D. and M.G.F. work has been done as a part of their Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. E.M. is a Serra Húnter Fellow. C.C. acknowledges support by MICIN/AEI/10.13039/501100011033 and ERDF/EU under the grants PID2023-146623NB-I00 and PID2023-147469NB-C21 and by the Generalitat de Catalunya under the grants 2021SGR-00343, 2021SGR-01519, and 2021SGR-01411. Computational support was provided by the Red Española de Supercomputación under the grants FI-2024-1-0005, FI-2024-2-0003, and FI-2024-3-0004. Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius and Francisco Javier Campos). These experiments were performed at Circe beamline at ALBA Synchrotron with the collaboration of ALBA staff. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001286-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Leveraging the integration of perovskite BaTiO3 on ferroelectric fluorite HfO2 to enhance energy storage cyclability and efficiency

  • Dong, Wenjing
  • Magén, César
  • Zou, Jingye
  • Quintana, Alberto
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Silva, José P.B.
  • Sánchez Barrera, Florencio
  • Fina, Ignasi
Perovskite relaxor ferroelectrics and antiferroelectrics have been the workhorse materials for energy storage electrostatic devices. Recently, there has been growing interest in ferroelectric HfO<inf>2</inf>, which is highly compatible with fabrication processes of the electronics industry and scalable down to the ultrathin limit. However, wake-up and fatigue phenomena in ferroelectric HfO<inf>2</inf> can limit the stability of energy storage capacity upon cycling. Interface engineering using simple A<inf>x</inf>O<inf>y</inf> (Ir, Ce, Ru, Al, La and Zr) binary oxides as capping layers is a promising strategy to mitigate these effects, but previous works have focused on optimizing high remanent polarization for memory applications. In contrast, for energy storage applications, the optimal parameters differ from those required for memory devices. Therefore, alternatives to A<inf>x</inf>O<inf>y</inf> capping layers must be investigated. Here, we demonstrate that the integration of the perovskite ferroelectric BaTiO<inf>3</inf> with the fluorite ferroelectric Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> yields highly stable energy storage density and enhanced efficiency over cycling and at high temperatures. We study a set of samples combining epitaxial Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> grown on Si(001) with polycrystalline BaTiO<inf>3</inf> of various thicknesses. The ferroelectricity of Hf<inf>0.5</inf>Zr<inf>0.5</inf>O<inf>2</inf> is preserved and the efficiency is enhanced without compromising the high breakdown voltage. The device performance is optimal for a BaTiO<inf>3</inf> thickness of 10 nm, exhibiting an energy storage density of 100 J/cm3, efficiency of 80 % and breakdown field of 12 MV/cm. We attribute this remarkable performance to the distinct electrical properties of BaTiO<inf>3</inf> compared with previously investigated A<inf>x</inf>O<inf>y</inf> capping layers. The investigations are carried out on a system that combines memory and energy storage properties, enabling the design of prospective devices in which energy recovery and memory functionalities are integrated at the chip level., Financial support from the Spanish Ministry of Science, Innovation and Universities (MCIN/AEI/10.13039/501100011033), through the Severo Ochoa MATRANS42 CEX2023–001263-S, CEX2023–001286-S, PDC2023–145874-I00, PID2023–147211OB-C21, PID2023–147211OB-C22, TED2021–130453B-C21, PID2020–112548RB-I00, PID2020–112914RB-I00, and PID2019–107727RB-I00 projects, from Generalitat de Catalunya (2021 SGR 00804) and from Regional Gobierno de Aragón through Project E13_23R is acknowledged. We also acknowledge project TED2021–130453B-C21, funded by MCIN/AEI/10.13039/501100011033. W.D. is financially supported by China Scholarship Council (CSC) with No. 202208310089. W.D. work has been done as a part of her Ph.D. program in Materials Science at Universitat Autònoma de Barcelona. https://doi.org/10.54499/2022.01740.PTDChttps://doi.org/10.54499/M-ERA-NET3/0003/2021https://doi.org/10.54499/2022.01735.CEECIND/CP1718/CT0036. This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the (i) Strategic Funding UID/04650/2025 (DOI: https://doi.org/10.54499/UID/04650/2025), (ii) project 2024.12826.MIT (https://doi.org/10.54499/2024.12826.MIT) and (iii) the project M-ERA-NET3/0003/2021 - NanOx4EStor grant agreement No 958174 (https://doi.org/10.54499/M-ERA-NET3/0003/2021). J. P. B. S. also thanks FCT for the contract under the FCT Tenure program 1st edition. Thin Films Laboratory (Raul Solanas and Victor Pardo) and X-ray Diffraction Laboratory (Anna Crespi, Joan Esquius and Francisco Javier Campos)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improved polarization-retention-endurance in Hf0.5Zr0.5O2 films by ZrO2 capping via electrostatic effects

  • Song, Tingfeng
  • Koutsogiannis, Panagiotis
  • Magén, César
  • Pardo, José A.
  • Sánchez, Florencio
  • Fina, Ignasi
Ferroelectric hafnia is one of the most promising materials for next generation of non‐volatile memory devices. Several strategies have demonstrated to be of interest to improve its functional properties. Interface engineering, realized by the introduction of additional layer in the capacitor structure, is demonstrated as a promising strategy. However, interface layers can have multiple implications, such as changes in the chemistry of the interfaces and an increase of depolarization field, whose effects are difficult to discriminate. The role of HfO2 and ZrO2 capping is explored on polarization, retention, endurance, and leakage properties of Hf0.5Zr0.5O2 epitaxial films. In HfO2 capped films, lower polarization is observed, and endurance and retention are also comparably worse than in ZrO2 capped films. Complementary under illumination ferroelectric characterization and capacitance measurements indicate a reduction of defects and interface capacitance contribution in ZrO2 capped films. For both cappings, the interfaces with the Hf0.5Zr0.5O2 layer are shown to be compositionally sharp and the phase of Hf0.5Zr0.5O2 (HZO) grains is replicated on the capping layer, indicating that electrostatic effects prevail and that the use of interface layers with high permittivity, here ZrO2, is crucial to favor good functional properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Yttrium: A Highly Efficient Dopant for Ferroelectric HfO<sub>2</sub>

  • Ghiasabadi Farahani, Mehrdad
  • Magén, César
  • Quintana, Alberto
  • Fina, Ignasi
  • Sánchez, Florencio
The ferroelectric phase of HfO2 is metastable, and its stabilization in thin films strongly depends on both doping and microstructure. Optimally doped films exhibit high ferroelectric polarization; however, it typically decreases rapidly with increasing film thickness. In contrast to these usual results, a few exceptions report ferroelectricity in thick films with specific dopants, such as Y or La, crystallized under conditions that favor granular microstructure. Disentangling the roles of microstructure and doping on the thickness-dependent stability of ferroelectricity remains essential, and identifying highly effective dopant atoms is of high relevance. In this work, Y-doped epitaxial films of various thicknesses up to about 100 nm are prepared to determine phase evolution and ferroelectric polarization. Films deposited on SrTiO3(001) and SrTiO3(110) substrates exhibit robust ferroelectric response across the entire thickness range, in contrast to equivalent La-doped films. Coexistence of monoclinic (paraelectric) and orthorhombic (ferroelectric) phases is observed, with columnar grains revealed by scanning transmission electron microscopy, demonstrating that the microstructure of epitaxial HfO2 films can be preserved beyond 10 nm. The observed columnar grain structure indicates that the robustness of ferroelectricity in Y-doped films results from the high effectiveness of Y, supporting its use in devices requiring thick ferroelectric layers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interface Engineering Using Multiple La-Doped HfO2 Epitaxial Subnanolayers To Improve the Ferroelectric Properties of Hf0.5Zr0.5O2 Films

  • Ghiasabadi Farahani, Mehrdad
  • Song, Tingfeng
  • Magén, César
  • Zou, Jingye
  • Sánchez, Florencio
  • Fina, Ignasi
The fabrication of ferroelectric multilayer systems based on hafnia represents a promising approach for achieving high-performance ferroelectric devices. Electrical cycling instability is, in this regard, a key barrier to commercialization. Here, we report on the incorporation of La:HfO2 subnanolayers into an epitaxial Hf0.5Zr0.5O2 film, forming multilayer heterostructures. Ferroelectric properties of multilayers are compared with single-layer structures. We observe that wake-up and fatigue are not present up to 10(5) cycles in the multilayers. The improved stability is enabled by the approximate to 25% reduction of coercive field together with the lower leakage resulting from the columnar microstructure throughout the entire thickness without phase discontinuity at interfaces and negligible presence of structural defects. This improvement on endurance response is obtained while the polarization is maintained in comparison with single Hf0.5Zr0.5O2 films; there is negligible loss of the polarization throught time and there is a fast response time lower than 100 ns, limited by the measurement circuit. In addition, dielectric permittivity and large resistive switching up to 10(8)%, not related to the ferroelectric response, are also observed. These findings underscore multilayer architecture as an interesting approach to improve properties while also showing that careful selection of interlayer composition is critical to improve device performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electronically Driven Magnetoelectric Coupling in Co/La:Hf0.5Zr0.5O2 Heterostructures for Energy-Efficient Neuromorphic Computing

  • Quintana, Alberto
  • Magen, Cesar
  • Ghiasabadi Farahani, Mehrdad
  • Dong, Wenjing
  • Zou, Jingye
  • Dix, Nico
  • Ma, Zheng
  • Menéndez, Enric
  • Foerster, Michael
  • Niño, Miguel Angel
  • Cazorla, Claudio
  • Sort, Jordi
  • Sánchez, Florencio
  • Fina, Ignasi
Magnetoelectric materials enable low-power memory devices by leveraging the electric control of magnetization. The discovery of ferroelectricity in doped hafnia has unlocked further opportunities since the distinct ferroelectric switching mechanism in this material can enable robust and multilevel modulation of magnetization by electric field, if combined with appropriate magnetic materials. Here, we demonstrate a 5% electric field-induced modulation of the saturation magnetization in a cobalt layer, driven by ferroelectric switching of an adjacent epitaxial La(1%):Hf0.5Zr0.5O2 film. Dichroic imaging with synchrotron radiation confirms that ferroelectric switching induces a magnetic change. We show that the response time is faster than 500 ns (limited by the setup time resolution threshold) and that energy consumption is 6 nJ. This low energy consumption is mainly enabled by the absence of relevant leakage current contribution (10 nA/cm2 at 500 mV). The found response time and energy-efficient behavior point to the presence of an electronically driven modulation of magnetism (i.e., conventional magnetoelectric effects), which is confirmed by theoretical calculations and compositional analysis. Additionally, a multilevel magnetoelectric response is observed, enabling neuromorphic-like behavior. The demonstration of magnetoelectric coupling in a system based on CMOS-compatible materials offers a viable route toward the development of low-power beyond von-Neumann technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Leveraging the integration of perovskite BaTiO3 on ferroelectric fluorite HfO2 to enhance energy storage cyclability and efficiency

  • Dong, Wenjing
  • Magén, César
  • Zou, Jingye
  • Quintana, Alberto
  • Bachelet, Romain
  • Saint-Girons, Guillaume
  • Silva, José P.B.
  • Sánchez, Florencio
  • Fina, Ignasi
Perovskite relaxor ferroelectrics and antiferroelectrics have been the workhorse materials for energy storage electrostatic devices. Recently, there has been growing interest in ferroelectric HfO2, which is highly compatible with fabrication processes of the electronics industry and scalable down to the ultrathin limit. However, wake-up and fatigue phenomena in ferroelectric HfO2 can limit the stability of energy storage capacity upon cycling. Interface engineering using simple AxOy (Ir, Ce, Ru, Al, La and Zr) binary oxides as capping layers is a promising strategy to mitigate these effects, but previous works have focused on optimizing high remanent polarization for memory applications. In contrast, for energy storage applications, the optimal parameters differ from those required for memory devices. Therefore, alternatives to AxOy capping layers must be investigated. Here, we demonstrate that the integration of the perovskite ferroelectric BaTiO3 with the fluorite ferroelectric Hf0.5Zr0.5O2 yields highly stable energy storage density and enhanced efficiency over cycling and at high temperatures. We study a set of samples combining epitaxial Hf0.5Zr0.5O2 grown on Si(001) with polycrystalline BaTiO3 of various thicknesses. The ferroelectricity of Hf0.5Zr0.5O2 is preserved and the efficiency is enhanced without compromising the high breakdown voltage. The device performance is optimal for a BaTiO3 thickness of 10 nm, exhibiting an energy storage density of 100 J/cm3, efficiency of 80 % and breakdown field of 12 MV/cm. We attribute this remarkable performance to the distinct electrical properties of BaTiO3 compared with previously investigated AxOy capping layers. The investigations are carried out on a system that combines memory and energy storage properties, enabling the design of prospective devices in which energy recovery and memory functionalities are integrated at the chip level.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Optimizing magneto-ionic performance in structure/composition-engineered ternary nitrides

  • Ma, Zheng|||0000-0003-3655-1448
  • Peda, Monalisha|||0000-0002-3299-1254
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Pellicer, Eva|||0000-0002-8901-0998
  • Liedke, Maciej Oskar|||0000-0001-7933-7295
  • Butterling, Maik|||0000-0003-3674-0767
  • Attallah, Ahmed|||0000-0002-7759-0315
  • Hirschmann, Eric
  • Wagner, Andreas|||0000-0001-7575-3961
  • Ibrahim, Fatima
  • Chshiev, Mairbek|||0000-0001-9232-7622
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionics, an emerging approach to manipulate magnetism that relies on voltage-driven ion motion, holds the promise to boost energy efficiency in information technologies such as spintronic devices or future non-von Neumann computing architectures. For this purpose, stability, reversibility, endurance, and ion motion rates need to be synergistically optimized. Among various ions, nitrogen has demonstrated superior magneto-ionic performance compared to classical species such as oxygen or lithium. Here, we show that ternary Co1-xFexN compound exhibits an unprecedented nitrogen magneto-ionic response. Partial substitution of Co by Fe in binary CoN is shown to be favorable in terms of generated magnetization, cyclability and ion motion rates. Specifically, the Co0.35Fe0.65N films exhibit an induced saturation magnetization of 1,500 emu/cm3, a magneto-ionic rate of 35.5 emu/(cm3·s) and endurance exceeding 103 cycles. These values significantly surpass those of other existing nitride and oxide systems. This improvement can be attributed to the larger saturation magnetization of Co0.35Fe0.65 compared to individual Co and Fe, the nature and size of structural defects in as-grown films of different composition, and the dissimilar formation energies of Fe and Co with N in the various developed crystallographic structures.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ionic control of magnetism in all-solid-state CoOx/yttria-stabilized zirconia heterostructures

  • Ma, Zheng|||0000-0003-3655-1448
  • Tan, Zhengwei|||0000-0003-4142-0637
  • Quintana, Alberto|||0000-0002-9813-735X
  • Spasojevic, Irena|||0000-0002-6426-7009
  • López-Pintó, Nicolau|||0000-0001-5145-6153
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fina, Ignasi|||0000-0003-4182-6194
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Menéndez, Enric|||0000-0003-3809-2863
  • Sort, Jordi|||0000-0003-1213-3639
Magneto-ionic gating, a procedure that enables the modulation of materials' magnetic properties by voltage-driven ion motion, offers alternative perspectives for emerging low-power magnetic storage and spintronic applications. Most previous studies in all-solid-state magneto-ionic systems have focused on the control of interfacial magnetism of ultrathin (i.e., 1-3 nm) magnetic films, taking advantage of an adjacent ionic conducting oxide, usually GdO or HfO, that transports functional ionic species (e.g., H or O). Here, we report on room-temperature OFF-ON ferromagnetism by solid-state magneto-ionics in relatively thick (25 nm) patterned CoO films grown on an yttria-stabilized zirconia (YSZ) layer, which acts as a dielectric to hold electric field and as an O ion reservoir. Upon negatively biasing, O ions from the CoO tend to migrate toward the YSZ gate electrode, leading to the gradual generation of magnetization (i.e., OFF-to-ON switching of a ferromagnetic state). X-ray absorption and magnetic circular dichroism studies reveal subtle changes in the electronic/chemical characteristics, responsible for the induced magnetoelectric effects in such all-oxide heterostructures. Recovery of the initial (virtually non-magnetic) state is achieved by application of a positive voltage. The study may guide future development of all-solid-state low-power CMOS-compatible magneto-ionic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Switching Dynamics and Improved Efficiency of Free-Standing Antiferroelectric Capacitors

  • Saeed, Umair|||0000-0001-7397-9123
  • Pesquera, David|||0000-0003-0681-3371
  • Liu, Ying|||0000-0002-1262-2590
  • Fina, Ignasi|||0000-0003-4182-6194
  • Ganguly, Saptam|||0000-0002-2090-6622
  • Santiso, José|||0000-0003-4274-2101
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Liao, Xiaozhou|||0000-0001-8565-1758
  • Catalan, Gustau|||0000-0003-0214-4828
The switching dynamics of antiferroelectric lead zirconate (PbZrO) freestanding capacitors compared to their epitaxial counterparts is reported. Frequency dependence of hysteresis indicates that freestanding capacitors exhibit a lower dispersion of switching fields, lower residual polarization, and faster switching response as compared to epitaxially-clamped capacitors. As a consequence, freestanding capacitor membranes exhibit better energy storage density and efficiency.