Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical properties of composite cathodes for La0.995Ca0.005NbO4-delta-based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Vert Belenguer, Vicente Bernardo
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed-conducting ceramic-ceramic (cer-cer) composites for proton-conducting solid oxide fuel cells (PC-SOFCs) based on La0.995Ca0.005NbO4-delta (LCN) have been investigated. Different ratios of La0.8Sr0.2MnO3-delta/La0.995Ca0.005NbO4-delta (LSM/LCN) composites have been tested as cathodes in symmetrical cells based on La0.995Ca0.005NbO4-delta dense electrolytes while two different electrode sintering temperatures (1050 and 1150 degrees C) have been studied. Additionally, different LCN doped materials (Pr, Ce and Mn), which present a different conduction behavior, have been used as components in composite cathodes (mixtures of LSM/doped-LCN 50/50 vol.%). Electrochemical impedance spectroscopy analysis has been carried out in the temperature range 700-900 degrees C under moist (2.5%) atmospheres. Different oxygen partial pressures (pO(2)) have been employed in order to characterize the processes (surface reaction and charge transport) occurring at the composite electrode under oxidizing conditions. The main outcome of the present study is that the mixture of LSM (electronic phase) and LCN (protonic phase) enables to decrease substantially the electrode polarization resistance. This is ascribed to the increase in the three-phase-boundary length and therefore it allows electrochemical reactions to occur in a larger region (thickness) of the electrode., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and CSIC Intramural 2008801093) are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Catalytic surface promotion of highly active La0.85Sr0.15Cr0.8Ni0.2O3-delta anodes for La5.6WO11.4-delta based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Bozza, F.
  • Bonanos, Nikos
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] La0.85Sr0.15CrO3-delta (LSC), La0.85Sr0.15Cr0.8Ni0.2O3-delta (LSCN) and LSCN infiltrated with Ni nanoparticles were tested as anodes for symmetrical cells based on La5.6WO11.4-delta (LWO) protonic electrolyte. These chromite-based electrode materials are compatible with LWO material, in contrast to the widely used NiO. Under typical anode reducing conditions, Ni is segregated from the LSCN lattice on the grain surface as metallic Ni nanoparticles, which are proved to be compatible with LWO in reducing conditions. These Ni nanoparticles become the catalytic active sites for the H-2 oxidation reaction in proton conducing anodes and the electrode performance is substantially improved regarding to pure LSC. Ni nanoparticle infiltration further improves the catalytic promotion of the anode, reducing the polarization resistance (R-p) previously limited by low frequency surface related processes. Indeed, the R-p, values achieved for LSCN infiltrated with Ni, e.g. 0.47 Omega cm(2) at 700 degrees C, suggest the practical application of this kind of anodes in proton conducting solid oxide fuel cells (PC-SOFC). (C) 2013 Elsevier B.V. All rights reserved., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560), the Spanish Government (ENE2011-24761, SEV-2012-0267 and CSIC Intramural 2008801093 grants) is kindly acknowledged. The authors thank M. Fabuel for sample preparation.