Skip to main content

BUSQUEDA DE NUEVOS MATERIALES CONDUCTORES DE OXIGENO E HIDROGENO EN ESTADO SOLIDO MEDIANTE QUIMICA COMBINATORIA

ENE2008-06302

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2008
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical properties of PSFC-BCYb composites as cathodes for proton conducting solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed conducing ceramic¿ceramic composites for proton conducting fuel cells have been investigated. Different ratios of Pr0.58Sr0.4Fe0.8Co0.2O3¿¿¿BaCe0.9Yb0.1O3¿¿ composites have been tested as cathodes in symmetrical cells based on BaCe0.9Y0.1O3¿¿ dense electrolytes. Impedance measurements have been carried out in the temperature range of 600¿800¿°C under wet (2.5%) air. Different dilutions on both oxygen partial pressure and water content have been performed as a function of the temperature in order to characterise the processes (surface reaction and charge transport) occurring at the composite electrode under oxidising conditions. The variation of the impedance spectra after replacing protonated water by heavy water has been studied in order to understand the role of the proton transport in the overall composite cathode operation. Additional four-point DC-conductivity measurements have been done under different atmospheres comprising different oxygen partial pressures and H2O/D2O saturation for composites and single materials., Funding from Universitat Politècnica de València (grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE-2008-06302) and European Union (FP7 Project EFFIPRO – grant Agreement 227560) are kindly acknowledged. Authors are indebted to S. Jiménez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Epitaxial Films of the proton-conducting Ca-doped LaNbO4 material and study of their charge transport properties

  • Cavallaro, Andrea
  • Solis Díaz, Cecilia
  • Garcia, Pablo R.
  • Ballesteros, Belén
  • Santiso, Jose L.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ca-doped LaNbO4 (LCNO) material has shown outstanding stability in harsh environments in combination with moderate proton-conductivity in polycrystalline samples at intermediate temperatures below 800 degrees C under a wet atmosphere. However, in polycrystalline materials the role of grain boundaries is believed to play a predominant role in protonic conductivity, which may make more difficult the study of the intrinsic properties of the material. For that reason the present study focuses on the preparation of epitaxial films by pulsed laser deposition on NdGaO3 (110) single crystal substrates. Under certain deposition conditions the films grow epitaxially with a monoclinic structure (fergusonite) and b-axis orientation. A polymorph change between the monoclinic and tetragonal structure has been observed at 250 degrees C. The film charge transport properties are analyzed under different atmospheres, dry and wet O-2 and H-2 as well as under deuterated conditions by using D-2 and D2O in order to check for the characteristic isotopic effect of the proton transport. Although a certain proton conductivity was observed under reducing wet atmospheres unexpected large DC conductivity values (of about 5.5 S/cm for the 80 nm thin LCNO film at 800 degrees C in dry O-2) have been observed for all films and ambient conditions. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the European Union (FP7 Project EFFIPRO, grant agreement 227560), and the Spanish Government (MAT2008-04931, ENE2008-06302, Consolider-Ingenio 2010-CSD2008-023 and CSIC Intramural 200880I093 grants). One author (A.C.) acknowledges the support of a “Juan de la Cierva” postdoctoral fellowship from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrogen separation and stability study of ceramic membranes based on the system Nd5LnWO12

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
This contribution presents the preparation, permeation and stability study of mixed protonic-electronic conducting membranes based on the system Nd(5)LnWO(12). The tung-states Ln(6)WO(12) are proton conducting crystalline materials, which show sufficient protonic and electronic mixed conductivity and stability in moist CO2 environments to consider them as potential candidates for the separation of hydrogen at high temperatures. Hydrogen separation properties of A-substoichiometric Nd6WO12 and Nd5LaWO12 were systematically analyzed, i.e. the influence of the H-2 concentration in feed stream, humidification degree and operating temperature on the hydrogen separation was studied. Finally, the stability of these materials at different temperatures and CO2-rich and sulfurcontaining environments was evaluated., Financial support by the Spanish Ministry for Science and Innovation (Grant JAE-Pre 08-0058 and Project ENE2008-06302/CON) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Authors wish to thank Sandra Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of CO2 Protective Layers by Spray Pyrolysis for Ceramic Oxygen Transport Membranes

  • García Torregrosa, Iván
  • Lobera González, Maria Pilar
  • Solis Díaz, Cecilia
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ceramic mixed ionic¿electronic conducting (MIEC) membranes enable very selective oxygen separation from air at high temperatures. Two major potential applications of oxygen-transport membranes are: i) oxygen production for oxyfuel power plants, and, ii) integration within high-temperature catalytic membrane reactors for methane or alkane upgrading by selective oxidative conversions. However, these applications involve contact with carbon-bearing atmospheres and most state-of-the-art highly permeable MIEC membranes do not tolerate operation under CO 2 -rich environments due to carbonation processes. The present contribution shows our ¿ rst attempts in the development of ceria-based protective thin layers on monolithic LSCF membranes. Gd-doped ceria (CGO) deposition is carried out by air blast spray pyrolysis on mirror-polished LSCF disc membranes. The layer thickness is maintained below 0.4 ¿ m in order to prevent the formation of cracks during thermal cycling and minimize limitations caused by the reduced oxygen permeability through the ceria layer. After optimization of the spraying process, smooth crack-free dense coatings are obtained with high crystallinity in the as-deposited state. The layers are characterized by XRD, SEM, AFM, DC-conductivity measurements, interferometry and optical microscopy. Oxygen separation is studied on coated LSCF using air as the feed and argon/CO 2 mixtures as the sweep gas in the temperature range 650¿1000 ° C. The protected membrane exhibits a higher stability than the uncoated LSCF membrane, although the nominal oxygen ¿ ux is slightly reduced at temperatures below 850 ° C due to the limited ambipolar conductivity of doped ceria in the range of oxygen partial pressures investigated. Moreover, the protective layer (250 nm thickness) remains stable after the permeation testing., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of the transport properties of the mixed ionic electronic conductor Ce 1-x Tb x O 2- + Co (x=0.1, 0.2) and evaluation as oxygen-transport membrane

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
[EN] Tb-doped ceria materials have been synthesized by the coprecipitation method. Cobalt oxide (2 mol %) has been added in order to improve the sinterability and conductivity. XRD measurements suggest that a part of the cobalt is incorporated in the ceria lattice. Ce1¿xTbxO2¿¿ materials showed predominantly ionic conductivity, but the mixed ionic electronic conductivity can be tuned by modifying Tb and Co doping level and temperature range. The ambipolar conductivity was determined by galvanic method coupled with gas permeation and these results support the applicability of these materials as oxygen transport membranes at high temperature. Ce1¿xTbxO2¿¿ +Co membranes are CO2 stable and yielded oxygen fluxes that can compete with reported perovskite materials. Oxygen diffusion and surface exchange coefficients in the range 1 ¿ 10¿5 to 1 ¿ 10¿4 cm2/s and 1 ¿ 10¿4 to 1 ¿ 10¿3 cm/s from 773 to 1023 K have been obtained by conductivity relaxation., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, Grant JAE-Pre 08-0058, and Grant BES-2009-015835), Spanish Industry Ministry (Project IAP-560620-2008-17), the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701) and Instalaciones Inabensa S.A. is kindly acknowledged. The help of Dr. Jorda (HT-XRD) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical properties of composite cathodes for La0.995Ca0.005NbO4-delta-based proton conducting fuel cells

  • Solis Díaz, Cecilia
  • Vert Belenguer, Vicente Bernardo
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed-conducting ceramic-ceramic (cer-cer) composites for proton-conducting solid oxide fuel cells (PC-SOFCs) based on La0.995Ca0.005NbO4-delta (LCN) have been investigated. Different ratios of La0.8Sr0.2MnO3-delta/La0.995Ca0.005NbO4-delta (LSM/LCN) composites have been tested as cathodes in symmetrical cells based on La0.995Ca0.005NbO4-delta dense electrolytes while two different electrode sintering temperatures (1050 and 1150 degrees C) have been studied. Additionally, different LCN doped materials (Pr, Ce and Mn), which present a different conduction behavior, have been used as components in composite cathodes (mixtures of LSM/doped-LCN 50/50 vol.%). Electrochemical impedance spectroscopy analysis has been carried out in the temperature range 700-900 degrees C under moist (2.5%) atmospheres. Different oxygen partial pressures (pO(2)) have been employed in order to characterize the processes (surface reaction and charge transport) occurring at the composite electrode under oxidizing conditions. The main outcome of the present study is that the mixture of LSM (electronic phase) and LCN (protonic phase) enables to decrease substantially the electrode polarization resistance. This is ascribed to the increase in the three-phase-boundary length and therefore it allows electrochemical reactions to occur in a larger region (thickness) of the electrode., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and CSIC Intramural 2008801093) are kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La5.5WO12-δ Characterisation of Transport Properties under Oxidizing Conditions: A Conductivity Relaxation

  • Solis Díaz, Cecilia
  • Haugsrud, Reidar
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The conduction properties of La5.5WO12-δ have been studied by using the electrochemical conductivity relaxation technique. Exchange and diffusion coefficients have been obtained from relaxation experiments including measurements of conductivity transients from (1) oxidation reduction under dry and wet oxygen and (2) hydration dehydration for both H2O-saturated and D2O-saturated oxygen at atmospheric pressure. The evolution of the total conductivity as a function of temperature, oxygen partial pressure, and the presence of H2O or D2O has moreover been characterized. The exchange coefficient for oxygen and water incorporation was calculated from the relaxation experiments. It was also possible to determine the coefficients for oxygen vacancy/oxygen ion (in dry and hydrated state) diffusion and for ambipolar diffusion of water. Oxygen vacancy/oxide ion diffusion is apparently not affected by the hydration state within the studied temperature range and water and oxygen partial pressures. The ambipolar water diffusion coefficient was significantly smaller than the one for the oxygen ion., Funding from European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and Grant JAE-Pre 08-0058) is kindly acknowledged. Authors are indebted to S. Jimenez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of transport properties and hydrogen permeation of chemically-stable proton conducting oxides bases on the system BaZr1-x-yYxMyO3-&amp, #948

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Ivanova, Mariya
  • Solis Díaz, Cecilia
  • Roitsch, Stefan
  • Meulenberg, Wilhem Albert
[EN] The structural and transport properties as well as the chemical stability of a series of proton-conducting oxides based on yttrium-doped barium zirconate were investigated. Specifically, Pr-, Fe- and Mn-doped BaZr1-x-yYxMyO3-delta compounds were prepared by solid state reaction. The compound exhibiting the highest total and protonic conductivity at elevated temperatures under reducing atmospheres was BaZr0.8Y0.15Mn0.05O3-delta. Temperature-programmed reduction experiments revealed a particular redox behavior related to the Mn-species under selected conditions. The hydrogen permeation was thoroughly studied as a function of the temperature, hydrogen concentration and the humidification degree in the sweep gas. Moreover, the transient processes induced by alternate step changes in the humidification degree of the sweep gas were analysed. The highest steady hydrogen evolution flow exceeded 0.03 ml min(-1) cm(-2) (0.9 mm-thick membrane) at 1000 degrees C for the humidified sweep gas. The stability of BaZr0.8Y0.15M0.05O3-delta under operation-relevant atmospheres (CO2-rich reducing atmosphere at high temperature) was tested using different techniques ( X-ray diffraction (XRD), Raman, SEM, TEM and TG) and the results showed that this material is stable even when exposed to 115 ppm H2S., Financial support by the Spanish Ministry for Economics and Competitiveness (JAE-Pre 08-0058, ENE2008-06302 and ENE2011-24761 grants) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Dr M. Ivanova thanks the Northern European Innovative Energy Research Program N-INNER (grant no. 09- 064274) and the German Federal Ministry of Education and Research (BMBF) for supporting the N-INNER Project ‘‘Novel High Temperature Proton and Mixed-Proton Electron Conductors for Fuel Cells and H2-separation membranes’’ (Contract 03SF0330).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultrahigh oxygen permeation flux through supported Ba0.5Sr0.5Co0.8Fe0.2O3-delta membranes

  • Baumann, S.
  • Lobera González, Maria Pilar
  • Schulze-Kueppers, F.
  • Meulenberg, W. A.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Oxygen transport membranes made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) were manufactured by tape casting and co-firing. The disk-shaped membranes consisted of a top gastight layer (70 mu m thick) and a porous substrate (830 mu m thick) with 34% open porosity. The variation of the permeation operation conditions allowed (i) the identification of the different limitations steps in the permeation process, i.e., bulk oxygen ion diffusion, catalytic surface exchange and gas phase diffusion in the membrane compartments and porous substrate, and (ii) the ultimate optimization of the oxygen flux. The variables considered in the systematic permeation study included the inlet gas flow rate of the sweep and air feed, the temperature and the nature of the oxygen feed gas (air or pure oxygen). Moreover, the influence of the deposition of a catalytic activation layer (17 mu m thick) made of BSCF on top of the thin gastight layer was investigated. As a result of this parametric study, unpreceded oxygen flux values were achieved, i.e., a maximum flux of 67.7 ml(STP) min(-1) cm(-2) was obtained at 1000 degrees C using pure oxygen as the feed and argon as the sweep, while a flux of 12.2 ml(STP) min(-1) cm(-2) at 1000 degrees C was obtained when air was used as the feed. (C) 2011 Elsevier BM. All rights reserved., Financial support from the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. Mrs H. Burlet has contributed to this work with the careful revision of the English language.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fluid Dynamic Modeling of Oxygen Permeation through Mixed Ionic-Electronic Conducting Membranes

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The oxygen transport in a lab-scale experimental set-up for permeation testing of oxygen transport membranes has been modeled using computational fluid dynamics using Finite Element Analysis. The modeling considered gas hydrodynamics and oxygen diffusion in the gas phase and vacancy diffusion of oxygen in a perovskite disc-shaped membrane at 1273. K. In a first step, the model allowed obtaining the coefficient diffusion of oxygen. The parametric study showed that the set-up geometry and flow rate in the air compartment did not have major influence in the oxygen transport. However, very important polarization effects in the sweep-gas (argon) compartment were identified. The highest oxygen permeation flux and the lowest oxygen concentration on the membrane surface were obtained for the following conditions (in increasing order of importance): (1) a large gas inlet radius; (2) short gas inlet distance; and (3) a high gas flow rate. © 2011 Elsevier B.V., The Spanish Ministry for Science and Innovation (JAE-Pre 08-0058 grant and ENE2008-06302 project) and through FP7 NASA-OTM Project (NMP3-SL-2009-228701) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Oxygen permeation studies in surface Pd-activated asymmetric Ce0.9Gd0.1O1.95 membranes for application in CO2 and CH4 environments

  • García-Fayos, Julio
  • Sogaard, Martin
  • Kaiser, Andreas
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Oxygen Transport Membranes (OTMs) present a high potential for being considered in the integration of O-2 supply systems in oxyfuel installations, as well as for the conduction of chemical reactions when operating Catalytic Membrane Reactors (CMRs). Several solutions are being prospected for overcoming the main drawbacks regarding materials stability and membrane performance. A highly stable material such as Ce0.9Gd0.1O1.95(CGO) doped with 2% mol. Co was studied as a 40 mu m-thick CGO supported CGO membrane. This membrane was characterized by studying its performance as oxygen permeation membrane for the production of oxygen under oxyfuel conditions and for the conduction of chemical reactions involving CH4. In order to improve oxygen surface reactions and consequently, the oxygen permeation, the membrane was surface activated with the addition of Pd nanoparticles. A broad characterization consisting of the study of O-2 production under different environments simulating real application conditions was conducted by subjecting the membrane to Ar, CO2 and CH4 environments in the temperature range of 750 to 1000 degrees C. A peak oxygen flux of 7.8 ml.min(-1)cm(-2) was obtained at 1000 degrees C when using a sweep consisting of 75% CH4 in Ar. This flux corresponds to a 16-fold improvement in the O-2 permeation at 1000 degrees C when sweeping with Ar, with an oxygen flux of 0.47 ml.min(-1).cm(-2). An oxygen flux of 1.2 ml.min(-1).cm(-2) was obtained at 1000 degrees C when feeding with pO(2) = 1 atm in feed side. Membrane performance under CO2-containing environments showed a positive effect of CO2 on permeation at 1000-900 degrees C, reaching up to 0.59 ml.min(-1).cm(-2) O-2 at 1000 degrees C. A continuous exposure of CO2 during 48 h at 750 degrees C resulted in a slight J(O-2) increase, with a reversible reduction in performance when returning to clean conditions, thus demonstrating high stability of CGO membranes., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302) and by the EU through FP7 NASA-OTM Project (NMP3-SL-2009- 228701) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrogen permeation through Nd-doped La6WO12 membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
[EN] This work presents the preparation and characterization of the hydrogen permeation of a mixed protonic-electronic conducting membrane based on the doped system La6WO12, in this instance, (La5/6Nd1/6)(5.5)WO12-delta. The tungstates Ln(6)WO(12) present sufficient protonic and electronic mixed conductivity and stability in moist CO2 environments and are potential candidates for the separation of hydrogen at high temperatures. Hydrogen separation properties of (La5/6Nd1/6)(5.5)WO12-delta were systematically analyzed, specifically, the influence of the H-2 concentration in feed stream, humidification degree and operating temperature on the hydrogen separation were studied. The best permeation results were achieved when both membrane sides were humidified (2.5 vol.% H2O), i.e., the highest hydrogen flux was 0.046 mL min(-1) cm(-2) at 1000 degrees C for membrane thickness of 0.9 mm. (C) 2011 Elsevier B.V. All rights reserved., Financial support by the Spanish Ministry for Science and Innovation (grant JAE-Pre 08–0058, projects ENE2008-06302 and ENE2011-24761) and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural-Transport Properties Relationships on Ce(1-x)Ln(x)O(2-delta) System (Ln = Gd, La, Tb, Pr, Eu, Er, Yb, Nd) and Effect of Cobalt Addition

  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
A large series of doped cerias have been prepared by the coprecipitation method combined with impregnation and completely characterized in order to have an overall understanding of the structural, oxygen vacancy concentration, and transport properties relationships. Several lanthanides were incorporated in the fluorite structure, and the effects of the final sintering temperature (1073 and 1573 K) and the addition of cobalt oxide on the structural properties were studied. The chosen lanthanides (Gd, La, Tb, Pr, Eu, Er, Yb and Nd) included a large range of ionic radii and different metals exhibiting variable oxidation states under the typical operating conditions for these materials. The materials have been characterized by powder XRD, high-temperature XRD, micro- Raman spectroscopy, helium pycnometry, and dc conductivity. Transport properties were correlated with structural features induced by the different ionic radii and variable oxidation state of the dopants. The highest ionic conductivity was obtained for the less distorted cells (Gd- and Nd-doped ceria) which represent the optimum balance between Coulomb interactions, steric effects, and vacancy distribution. The lowest Ea value was found for materials with long cell parameters., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, ENE2011-24761 and Grant BES-2009-015835), Spanish Industry Ministry (Project IAP-560620-2008-17), and Instalaciones Inabensa S.A. is kindly acknowledged. Dr. Jose L. Jorda contributed to this work with HT-XRD diffraction experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of ODHE membrane reactor based on mixed ionic electronicconductor using soft computing techniques

  • Lobera González, Maria Pilar
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Argente, Estefanía|||0000-0002-5431-3868
  • Botti V.|||0000-0002-6507-2756
[EN] This work presents the optimization of the operating conditions of a membrane reactor for the oxidative dehydrogenation of ethane. The catalytic membrane reactor is based on a mixed ionic-electronic conducting material, i.e. Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(delta-3), which presents high oxygen flux above 750 degrees C under sufficient chemical potential gradient. Specifically, diluted ethane is fed into the reactor chamber and air (or diluted air) is flushed to the other side of the membrane. A framework based on Soft Computing techniques has been used to maximize the ethylene yield by simultaneously varying five operation variables: nominal reactor temperature (Temp); gas flow in the reaction compartment (QHC); gas flow in the oxygen-rich compartment (QAir); ethane concentration in the reaction compartment (%C(2)H(6)); and oxygen concentration in oxygen-rich compartment (%O(2)). The optimization tool combines a genetic algorithm guided by a neural network model. This shows how the neural network model for this particular problem is obtained and the analysis of its behavior along the optimization process. The optimization process is analyzed in terms of: (1) catalytic figures of merit, i.e., evolution of yield and selectivity towards different products and (2) framework behavior and variable significance. The two experimental areas maximizing the ethylene yield are explored and analyzed. The highest yield reached in the optimization process exceeded 87%. (C) 2010 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058, CONSOLIDER-INGENIO 2010 under grant CSD2007-00022, TIN2008-04446/TIN project and TIN2009-13839-C03-01 project, which are co-funded by the Spanish government and FEDER funds), EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Use of Supported Ceria Membranes for Oxyfuel process / Syngas production

  • Lobera González, Maria Pilar
  • Foghmoes, Soren P.
  • Søgaard, Martin
  • Kaiser, Andreas
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ceramic oxygen transport membranes (OTMs) enable selective oxygen separation from air at high temperatures. Among several potential applications for OTMs, the use in (1) oxygen production for oxyfuel power plants and (2) the integration in high-temperature catalytic membrane reactors for alkane upgrading through selective oxidative reactions are of special interest. Nevertheless, these applications involve the direct contact of the membrane surface with carbon-rich atmospheres. Most state-of-the-art permeable membranes are based on perovskites, which are prone to carbonation under operation in CO2-rich environments and/or decomposition in reducing gas environments. The oxygen flux through supported thin film membranes of Ce-0.9Gd0.1O1.95-delta (CGO) with 2 mol.% of cobalt was measured for oxygen separation in oxyfuel processes and in syngas production and degradation was compared to perovskite membranes. The CGO membranes consist of a 27 mu m-thick gastight CGO layer supported on a porous CGO substrate. The flat surface of the membrane was coated using two different porous catalytic layers aiming to improve the oxygen activation rate on the permeate side while the porous substrate was infiltrated with an oxygen reduction catalyst. Oxygen separation was studied using air as feed and argon/CO2 or argon/CH4 mixtures as sweep gas in the temperature range 750-1000 degrees C. The supported membrane exhibited a maximum oxygen flux of ca. 5 ml min(-1) cm(-2) at 1000 degrees C when diluted methane was used as sweep gas. The CGO membrane showed high stability in CO2 (in contrast to tests on La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF) membranes) and no detrimental effect on the oxygen flux is observed when CO2 is present in the sweep gas even at temperatures below 800 degrees C. Moreover, the SEM analysis showed that membrane integrity remained stable after the permeation tests using CO2. (C) 2011 Elsevier B. V. All rights reserved., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302) and by the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High Ethylene Production through ODHE Membrane Reactors based on Fast Oxygen-Ion Conductors

  • Lobera González, Maria Pilar
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] High ethylene productivity through the oxidative dehydrogenation of ethane has been achieved in a catalytic membrane reactor based on a highly solid-state oxygen permeable material (Ba0.5Sr0.5Co0.8Fe0.2O3 d). Ethylene is selectively produced by avoiding the direct contact of molecular oxygen and hydrocarbons, thereby minimizing the oxygen concentration in the reaction side. Another key aspect in the process is the dilution of ethane in the feed to achieve high ethylene yields. There exists a specific combination of the ethane concentration and feed flow that maximizes ethylene productivity, whereas the diluting gas nature has a direct impact on the formation of higher olefins and coking issues. Indeed, the use of methane as an almost-inert dilutant allows the reduction of oligomerization and aromatization of the formed ethylene and therefore improves the reactor stability even at operating temperatures from 800 to 900 8C. This behavior is attributed to the competitive adsorption of methane and ethane/ethylene, the modification of the radical-driven homogeneous reaction, and the change of partially reducible membrane surface. The productivity values achieved at 8508C were 383 mLmin 1cm 2 for Ar and 353 mLmin 1cm 2 for CH4, with a selectivity of 80 and 90%, respectively, Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and FPI Grant JAE-Pre 08-0058), the European Union through FP7 NASA-OTM Project (NMP3-SL-2009228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ethylene Production by ODHE in Catalytic Modified Ba0.5Sr0.5Co0.8Fe0.2O3 Membrane Reactors

  • Lobera González, Maria Pilar
  • García Fayos, Julio
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Process intensification by the integration of membranes and high-temperature reactors offers several advantages with regard to conventional process schemes, that is, energy saving, safe operation, reduced plant/unit size, and higher process performance, for example, higher productivity, catalytic activity, selectivity, or stability. We present the study of oxidative dehydrogenation of ethane at 850 8C on a catalytic membrane reactor based on a mixed ionic¿electronic conducting membrane. The surface of the membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3 d has been activated by using different porous catalytic layers based on perovskites. The layer was deposited by screen printing, and the porosity and thickness was studied for the catalyst composition. The different catalyst formulations are based on partial substitution of A- and B-site atoms of doped strontium ferrite/cobaltites (A0.6Sr0.4Co0.5Fe0.5O3 d and Ba0.6Sr0.4BO3 d) and were synthesized by an ethylenediaminetetraacetic acid¿citrate complexation route. The use of a disk-shaped membrane in the reactor enabled the direct contact of gaseous oxygen and hydrocarbons to be avoided, and thus, the ethylene content increased. High ethylene yields (up to 81%) were obtained by using a catalytic coating based on Ba0.5Sr0.5Co0.8Fe0.2O3 d, which included macropores produced by the addition of graphite platelets into the screen-printing ink. The promising catalytic results obtained with this catalytically modified membrane reactor are attributed to the combination of 1) the high activity, as a result of the high temperature and oxygen species diffusing through the membrane; 2) the control of oxygen dosing and the low concentration of molecules in the gas phase; and 3) suitable fluid dynamics, which enables appropriate feed contact with the membrane and the rapid removal of products., Financial support by the Spanish Ministry for Science and Innovation (Project ENE2008-06302, ENE2011-24761 and FPI Grant JAE-Pre 08-0058), the EU through the FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. We thank S. Jimenez for material preparation, M. Fabuel for TPD experiments, and Forschungszentrum Julich for SEM analysis of BSCF catalytic layer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study of CO2 stability and electrochemical oxygen activation of mixed conductors with low thermal expansion coefficient based on the TbBaCo3ZnO7+δ system

  • Vert Belenguer, Vicente Bernardo
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The influence of different application-oriented factors on the electrochemical activity and stability of TbBaCo3ZnO7+delta when used as a solid oxide fuel cell cathode has been studied. Calcination at temperatures above 900 degrees C (e.g. 1000 degrees C) leads to a significant increase in the electrode polarization resistance. The effect of the sintering temperature of the TbBaCo3ZnO7+delta cathode seems to be more important than the effect produced by the Tb substitution as observed when compared with 900 degrees C-sintered YBaCo3ZnO7+delta; and ErBaCo3ZnO7+delta electrode performances. The presence of CO2 in the air flow leads to an increase of roughly 10% in the polarization resistance for the whole studied temperature range (500-850 degrees C) while this effect is reversible. Analysis of the impedance spectroscopy measurements shows that the exchange rate constant (k(G) from Gerischer element) is significantly affected by CO2 at temperatures below 700 degrees C, while the diffusion coefficient related parameter is slightly influenced at low temperatures. Electrode degrades with a low constant rate of 1 m Omega cm(2) h(-1) after 60h. This cathode material exhibits high CO2 tolerance, as shown by temperature programmed treatment under a continuous gas flow of air with 5% CO2, and a relatively low thermal expansion coefficient., Financial support by the Universitat Politecnica de Valencia (Grant UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE2008-06302), the EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701), and the Helmholtz Association of German Research Centres through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) is kindly acknowledged. The revision of this paper was funded by the Politecnica de Valencia. The authors wish to thank S. Jimenez for material preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Quaternary mixture designs applied to the development of multi-element oxygen electrocatalysts based on the Ln(0.58)Sr(0.4)Fe(0.8)Co(0.2)O(3-delta) system (Ln = La1-x-y-zPrxSmyBaz): Predictive modeling approaches

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Vert Belenguer, Vicente Bernardo
[EN] The experimental data generated through the optimization of oxygen electrocatalysts based on the perovskite Ln(0.58)Sr(0.4)Fe(0.8)Co(0.2)O(3-delta) system (Ln = La1-x-y-zPrxSmyBaz) have been modeled following different approaches. The main application of these catalysts is as fuel cell (SOFC) cathodes and activation layers on oxygen-transport membranes. Among the different La, Pr and Sm combinations, those containing at a time Sm-La-Ba or alternatively Pr-La-Ba show the lowest polarization resistance values. Within the same substitution degree, Pr-Ba-based compositions have lower electrode resistance than samarium-based ones. The experimental datasets available for the series of materials can be divided into: composition data, structural data (X-ray diffraction patterns), and electrochemical characterization data (electrochemical impedance spectra). Electrochemical characterization was performed for each electrode composition as a function of the operating temperature and oxygen partial pressure. Different ways of reducing the dimensionality of the spectral descriptors (XRD patterns and impedance spectroscopy) were applied based on knowledge-guided and unsupervised approaches. Different material descriptors were studied as input variables in the modeling of the electrochemical properties. (C) 2010 Elsevier B.V. All rights reserved., Funding from Universitat Politècnica de València (grant UPV2007-06), the Spanish Ministry for Science and Innovation (Project ENE-2008-06302), the Helmholtz Association of German Research Centers through the Helmholtz Alliance MEM-BRAIN (Initiative and Networking Fund) and EU through FP7 NASA-OTM Project (NMP3-SL-2009-228701) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redox stability and electrochemical study of nickel doped chromites as anodes for H-2/CH4-fueled solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • MELO FAUS, FRANCISCO VICENTE
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The influence of nickel and strontium incorporation in LaCrO3 on the crystalline structure, redox behavior and electrochemical performance by impedance spectroscopy using symmetrical cells has been studied. Namely, the La1-xSrxCr1-yNiyO3-delta (x = 0, 0.15: y = 0.05, 0.1, 0.2) system was investigated. Structural and redox evolution has been monitored by X-ray diffraction in oxidized and reduced samples. Reduced samples kept the initial perovskite structure although metallic nickel nanoparticles were detected on the perovskite grain surface by TEM analysis. The re-oxidized surface did not present nickel particles, suggesting the nickel re-incorporation into perovskite lattice coupled with cation diffusion. The perovskites were tested as SOFC anodes and the polarization resistance depended on the nickel stoichiometry and the reduction temperature. La0.85Sr0.15Cr0.9Ni0.1O3-delta reduced at 800 degrees C showed the lowest polarization resistance, both in hydrogen and methane. In fact this composition showed a 20% methane conversion at 900 degrees C for the methane steam reforming in a fixed bed reactor. Tolerance to redox cycling was proved electrochemically by in situ treatments of La0.85Sr0.15Cr0.9Ni0.1O3-delta electrode. Materials were further analyzed by TPR and XPS (in oxidized and reduced state) in order to identify the possible species involved in the electrocatalytic processes. (C) 2011 Elsevier B.V. All rights reserved., Authors thank funding by the Universidad Politecnica de Valencia (Grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE2008-06302) and Generalitat Valenciana (Grant ACOMP2010/223). P. Concepcion has contributed to this work with the XPS measurements. N. Morlanes, S. Climent and M. Algarra are kindly acknowledged for the catalytic experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Adjusting the conduction properties of La0.995Ca0.005NbO4 by doping for proton conducting fuel cells electrode operation

  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Structural characterization and transport properties of A- (Ce and Pr) and B-site (Mn) doped La0.995Ca0.005- NbO4 (-) (delta) (LCN) have been investigated. Conductivity data have been analyzed in the temperature range from 400 to 800 degrees C as a function of the oxygen partial pressure under dry atmospheres and under different wet atmospheres. All compounds present changes in the activation energy due to a phase transformation at ca. 550 degrees C. Under wet conditions the conductivity is predominantly protonic in all compounds except for the Ce doped sample under oxidizing atmospheres. The conductivity of Ce doped sample is principally electronic at high pO(2) and high temperatures while it becomes more ionic at low pO(2) and temperatures. The combination of n-type electronic and protonic conductivity for Ce doped LCN under reducing atmospheres suggests its potential application as an anode component for LCN-based proton conducting fuel cells (PCFC). Moreover, Pr doped LCN shows remarkable p-type electronic conductivity at high pO(2) in combination with protonic conductivity, which are interesting properties for LCN-based PCFC cathode components. Furthermore, Ce and Pr addition have allowed increasing the sintering activity with respect to LCN powders. The activation energies and the preexponential factors under wet atmospheres have been studied and correlated. It was found that they obey the Meyer-Neldel law and an estimation of the activation energy of protons in both crystal structures has been derived. (C) 2011 Elsevier B.V. All rights reserved., Funding from the European Union (FP7 Project EFFIPRO - Grant Agreement 227560) and the Spanish Ministry for Science and Innovation (Project ENE2008-06302 and CSIC Intramural 200880I093) is kindly acknowledged. Authors are indebted to M. Fabuel for sample preparation.