Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical properties of PSFC-BCYb composites as cathodes for proton conducting solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • Solis Díaz, Cecilia
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The electrochemical properties of mixed conducing ceramic¿ceramic composites for proton conducting fuel cells have been investigated. Different ratios of Pr0.58Sr0.4Fe0.8Co0.2O3¿¿¿BaCe0.9Yb0.1O3¿¿ composites have been tested as cathodes in symmetrical cells based on BaCe0.9Y0.1O3¿¿ dense electrolytes. Impedance measurements have been carried out in the temperature range of 600¿800¿°C under wet (2.5%) air. Different dilutions on both oxygen partial pressure and water content have been performed as a function of the temperature in order to characterise the processes (surface reaction and charge transport) occurring at the composite electrode under oxidising conditions. The variation of the impedance spectra after replacing protonated water by heavy water has been studied in order to understand the role of the proton transport in the overall composite cathode operation. Additional four-point DC-conductivity measurements have been done under different atmospheres comprising different oxygen partial pressures and H2O/D2O saturation for composites and single materials., Funding from Universitat Politècnica de València (grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE-2008-06302) and European Union (FP7 Project EFFIPRO – grant Agreement 227560) are kindly acknowledged. Authors are indebted to S. Jiménez for sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis de maestría (MasterThesis)

Monitorización del contenido de humedad de láminas de lasaña mediante ultrasonidos sin contacto, Contactless Ultrasonic Monitoring of Moisture Content in Lasagna Sheets, Monitorització del contingut d humitat de làmines de lasanya mitjançant ultrasons sense contacte

  • Mansilla-Villena Becerra, Constanza María Pía
[ES] El contenido de humedad es un factor determinante en la calidad y aceptabilidad de los productos de pasta laminada, ya que afecta a su estructura y propiedades texturales durante el procesado y el almacenamiento. No obstante, la evaluación de estos cambios se ha basado tradicionalmente en métodos destructivos, limitando su aplicación industrial. El objetivo de este estudio fue analizar la relación entre el contenido de humedad y los parámetros ultrasónicos y texturales de muestras de lasaña seca, evaluando el potencial de técnicas ultrasónicas sin contacto como herramienta no destructivas. Las muestras se sometieron a diferentes condiciones de humedad y se analizaron mediante ensayos de textura y mediciones ultrasónicas, aplicándose análisis estadístico y multivariante. Los resultados mostraron que el aumento de humedad se asocia con una pérdida de firmeza y rigidez, junto con disminución del tiempo de vuelo, lo que sugiere modificaciones en la matriz alimentaria. Estos resultados indican el potencial de las técnicas ultrasónicas para la monitorización no destructiva de productos de pasta., Los autores agradecen la financiación del proyecto ULTRADIGITALM (AGROALNEXT/2022/045), el cual forma parte del programa AGROALNEXT, financiado por el Ministerio de Ciencia e Innovación con fondos europeos NextGenerationEU (PRTR-C17.I1), así como por la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced oxygen diffusion in low barium-containing La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3&amp, #8722, &amp, #948, intermediate temperature solid oxide fuel cell cathodes

  • Vert Belenguer, Vicente Bernardo
  • Kilner, J.A.
  • Burriel, M.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Isotopic tracer diffusion studies have been performed on the perovskite composition La0.2175Pr0.2175Ba0.145Sr0.4Fe0.8Co0.2O3-delta to obtain the diffusion and surface exchange coefficients for oxygen. This material has been identified as a highly active electrocatalytic cathode for intermediate temperature solid oxide fuel cells. The oxygen diffusion coefficients obtained in the 450-650 degrees C temperature range are higher than the ones measured for most of the cathode materials reported in the literature and they agree with those calculated from electrochemical impedance spectroscopy measurements performed on symmetrical cells., Funding from the Universitat Politecnica de Valencia (grants FPI-UPV-2007-06 and PAID-00-10) and Spanish Government (grant ENE2011-24761) is kindly acknowledged. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no : PIEF-GA-2009-252711 and from King Abdullah University of Science and Technology (KAUST) through a research grant. The authors would like to thank S. Jimenez for material and sample preparation and Dr. S. Fearn, R. Charter and S. Cook for their help with ToF-SIMS analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redox stability and electrochemical study of nickel doped chromites as anodes for H-2/CH4-fueled solid oxide fuel cells

  • Vert Belenguer, Vicente Bernardo
  • MELO FAUS, FRANCISCO VICENTE
  • Navarrete Algaba, Laura
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The influence of nickel and strontium incorporation in LaCrO3 on the crystalline structure, redox behavior and electrochemical performance by impedance spectroscopy using symmetrical cells has been studied. Namely, the La1-xSrxCr1-yNiyO3-delta (x = 0, 0.15: y = 0.05, 0.1, 0.2) system was investigated. Structural and redox evolution has been monitored by X-ray diffraction in oxidized and reduced samples. Reduced samples kept the initial perovskite structure although metallic nickel nanoparticles were detected on the perovskite grain surface by TEM analysis. The re-oxidized surface did not present nickel particles, suggesting the nickel re-incorporation into perovskite lattice coupled with cation diffusion. The perovskites were tested as SOFC anodes and the polarization resistance depended on the nickel stoichiometry and the reduction temperature. La0.85Sr0.15Cr0.9Ni0.1O3-delta reduced at 800 degrees C showed the lowest polarization resistance, both in hydrogen and methane. In fact this composition showed a 20% methane conversion at 900 degrees C for the methane steam reforming in a fixed bed reactor. Tolerance to redox cycling was proved electrochemically by in situ treatments of La0.85Sr0.15Cr0.9Ni0.1O3-delta electrode. Materials were further analyzed by TPR and XPS (in oxidized and reduced state) in order to identify the possible species involved in the electrocatalytic processes. (C) 2011 Elsevier B.V. All rights reserved., Authors thank funding by the Universidad Politecnica de Valencia (Grant FPI-UPV-2007-06), the Spanish Ministry for Science and Innovation (Project ENE2008-06302) and Generalitat Valenciana (Grant ACOMP2010/223). P. Concepcion has contributed to this work with the XPS measurements. N. Morlanes, S. Climent and M. Algarra are kindly acknowledged for the catalytic experiments.