Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Promising Impregnated Mn-based Oxygen Carriers for Chemical Looping Combustion of Gaseous Fuels

  • Costa, T.R.
  • Gayán, P.
  • Abad, A.
  • García-Labiano, F.
  • De Diego, L.F.
  • Melo, D.M.A.
  • Adánez, J.
Promising impregnated oxygen carriers, based on copper and iron, have been previously developed for CLC with gaseous fuels (CH4, syngas, LHC). Recently, because of its low cost and environmental compatibility, Mn-based oxygen carriers are now being considered as an attractive option for chemical-looping combustion (CLC) applications. In this work, a screening of different commercial supports in fluidizable particle size for impregnated Mn-based materials has been carried out. Different oxygen carriers have been prepared by incipient impregnation on ZrO2, and CaAl2O4, and evaluated with respect to their mechanical resistance, fuel gas reactivity and fluidization properties such as agglomeration and attrition rate. In a first step, particles showing high enough crushing strength values were selected for the reactivity investigation. The redox reactivity was evaluated through TGA experiments at suitable temperatures for the CLC process (i.e. 850-950 °C) using H2, CO and CH4. Multi cycle redox analysis and full physical and chemical characterization was also performed. In a second step, materials with high enough reactivity were prepared for fluidized bed evaluation. A batch fluidized bed installation with continuous gaseous fuel feed was used to analyze the product gas distribution during reduction and oxidation reactions at different operation temperatures, and agglomeration and attrition behavior of the selected materials. Results showed that an oxygen carrier impregnated using ZrO2 as support, had high enough reactivity and low attrition rate. Therefore, this material can be selected as a candidate for the development of CLC with syngas with promising results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of (MnxFe1-x)2TiyOz Particles as Oxygen Carrier for Chemical Looping Combustion

  • Abián, M.
  • Abad, A.
  • Izquierdo, M.T.
  • Gayán, P.
  • De Diego, L.F.
  • García-Labiano, F.
  • Adánez, J.
The present work accomplishes a screening of the performance of Mn-Fe-Ti based oxygen carriers, prepared with different Mn/(Mn+Fe) molar ratios in the general formula (MnyFe1-y)Ti0.15Ox. The oxygen carriers were prepared by physical mixing followed by pelletizing under pressure, calcining, crushing and sieving in the 100-300 µm particle size interval. The characterization of the carriers is based on the evaluation of their crushing strength, magnetic properties and reduction and oxidation behavior through TGA experiments at temperatures suitable for the CLC process (i.e. 850-950 °C). In addition, the main chemical structures of the Mn-Fe-Ti system were identified as a function of the Mn/(Mn+Fe) molar ratio. Oxygen uncoupling property was analyzed by reduction under a N2 atmosphere and the capability to interact with fuel gases was analyzed by using CH4, H2 and CO. Results indicate that the (MnyFe1-y)Ti0.15Ox oxygen carriers with Mn/(Mn+Fe) molar ratios of 0.55-0.87 have very promising properties for the CLC process with solid fuels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels

  • Abián, María
  • Abad, Alberto
  • Izquierdo, María T.
  • Gayán, Pilar
  • de Diego, Luis F.
  • García-Labiano, Francisco
  • Adánez, Juan
Mixed oxides of Mn-Fe have been identified as suitable materials for Chemical Looping Combustion (CLC) with solid fuels both via in-situ Gasification Chemical Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU) processes. These materials show the property of react with gaseous fuels as well as release oxygen under given conditions, while cheap metals are used. In addition, these materials can show magnetic properties that can be used for an easy separation from ash in CLC with solid fuels. Thus, losses of oxygen carrier material in the ash drain stream would be reduced. Different cations have been proposed for improving the magnetic properties of manganese ferrites, including Ti4+. In this context, the present work accomplishes a screening of (MnxFe1-x)2O3 doped with 7 wt.% TiO2, with x ranging from 0 to 1. The influence of Mn:Fe ratio on their physical and chemical properties was evaluated. In general, particles with high crushing strength values (>4 N) were obtained, and magnetic characteristics were highlighted when x ¿ 0.66. The oxygen uncoupling capability depended on the Mn:Fe ratio and the oxidation conditions, i.e. temperature and oxygen partial pressure. Broader oxidation conditions to take advantage of the oxygen uncoupling capability were found for materials with low Mn content. On contrary, the reactivity with fuel gases (CH4, H2 and CO) increased with the Mn content. Thus, oxygen carriers with Mn/(Mn + Fe) molar ratio in the 0.5–0.9 interval showed interesting properties at suitable temperatures for the iG-CLC and CLOU processes (i.e. 850–980 °C). The material with Mn/(Mn + Fe) = 0.55 was preferred considering a trade-off between reactivity and magnetic properties.