Skip to main content

-

FPDI-2013-16172

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Contratos para la Formación Posdoctoral
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A study of dimethyl carbonate conversion and its impact to minimize soot and NO emissions

  • Alzueta, M. U.
  • Salinas, Pablo
  • Millera, Ángela
  • Bilbao, Rafael
  • Abián, María
6 figures, 3 tables.-- Supplementary material under CC-BY license https://creativecommons.org/licenses/by/4.0/, Fuel reformulation through the use of oxygenated compounds e.g. dimethyl carbonate (DMC) is a potential option both to reduce the harmful soot emissions and to overcome the dependence on fossil fuels since many of them are bio-derived fuels. DMC presents a relative high oxygen content as compared with other additives and suitable characteristics to be used in combustion systems. The different fundamental aspects of the DMC combustion process including its oxidation behavior its tendency to produce soot and the role of the NO presence in the reaction system were studied. Experiments were conducted under well controlled conditions using specifically designed flow reactor systems. Results demonstrated the low tendency of DMC to form soot compared to other oxygenates and its capacity to contribute to NO reduction under specific fuel-rich conditions. Modeling calculations successfully reproduce reasonably well the experimental trends observed and emphasized the sensitivity of the results to the thermodynamic data of DMC and DMC derived species., Authors acknowledge the Aragón Government and the European Social Fund, GPT group, and MINECO and FEDER (Project CTQ2015-65226-R) for financial support. Dr. M. Abián acknowledges the MINECO and Instituto de Carboquímica (ICB-CSIC) for the post-doctoral grant awarded (FPDI-2013-16172).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Interaction soot-SO2. Experimental and kinetic analysis

  • Abián, M.
  • Millera, A.
  • Bilbao, R.
  • Alzueta, M.U.
This study aims to evaluate the capability of SO2 to interact with soot and to determine the kinetics of this reaction under conditions of interest for combustion. The conditions of the soot reactivity experiments were: 1% SO2 with nitrogen to balance, around 10 mg of soot, and different reaction temperatures for each run: 1275, 1325, 1375, 1425, and 1475 K. Results demonstrate that SO2 does interact with soot. The evaluation of the soot reactivity has been based on the calculation of the time for the complete conversion of carbon through the employment of the Shrinking Core Model equations for decreasing size particle with chemical reaction control. The reactivity of soot with SO2 increased by a factor of about 3 when increasing the reaction temperature of the test from 1275 K to 1475 K. Kinetics in terms of Arrhenius parameters showed that the activation energy of the interaction of soot with SO2 was around 82 kJ/mol.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A study of dimethyl carbonate conversion and its impact to minimize soot and NO emissions

  • Alzueta, María U.
  • Salinas, Pablo
  • Millera, Ángela
  • Bilbao, Rafael.
  • Abián, María
Fuel reformulation through the use of oxygenated compounds e.g. dimethyl carbonate (DMC) is a potential option both to reduce the harmful soot emissions and to overcome the dependence on fossil fuels since many of them are bio-derived fuels. DMC presents a relative high oxygen content as compared with other additives and suitable characteristics to be used in combustion systems. The different fundamental aspects of the DMC combustion process including its oxidation behavior its tendency to produce soot and the role of the NO presence in the reaction system were studied. Experiments were conducted under well controlled conditions using specifically designed flow reactor systems. Results demonstrated the low tendency of DMC to form soot compared to other oxygenates and its capacity to contribute to NO reduction under specific fuel-rich conditions. Modeling calculations successfully reproduce reasonably well the experimental trends observed and emphasized the sensitivity of the results to the thermodynamic data of DMC and DMC derived species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Role of Potassium and Calcium on the Combustion Characteristics of Biomass Obtained from Thermogravimetric Experiments

  • Abián, M.
  • Alzueta, M.U.
  • Carvalho, A.
  • Rabaçal, M.
  • Costa, M.
This work focuses on the combustion behavior of raw and demineralized grape pomace and grape pomace doped with 0.1, 0.5, 0.82 (equal to the K concentration in the raw biomass), 3, and 6 wt % K and 0.1, 0.5, 1.08 (equal to the Ca concentration in the raw biomass), 3, and 6 wt % Ca. To identify the individual role of calcium and potassium, the biomass samples were either pyrolyzed in a N2 atmosphere or oxidized in air in a thermogravimetric analyzer (TGA) during non-isothermal runs at 10 K/min from room temperature to a maximum temperature of 1275 K. In all of the cases, the biomass pyrolysis process shows one main stage associated with the volatile matter release. This process is not significantly affected by the mineral content of biomass nor the presence of high K and Ca contents. During combustion in air, the biomass samples show two main distinct stages that are associated with the volatile matter release and the char oxidation. Whereas the main devolatilization stage is not significantly affected by the mineral content of the biomass, the char oxidation stage is shifted to higher temperatures for the demineralized biomass. Potassium and calcium play a different role on the char oxidation process. In general, char oxidation is promoted with increasing the K content, whereas Ca does not significantly influences this process. The TGA results were also used to determine the kinetic parameters of the pyrolysis and combustion processes of biomass in the presence of K and Ca.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of (MnxFe1-x)2TiyOz Particles as Oxygen Carrier for Chemical Looping Combustion

  • Abián, M.
  • Abad, A.
  • Izquierdo, M.T.
  • Gayán, P.
  • De Diego, L.F.
  • García-Labiano, F.
  • Adánez, J.
The present work accomplishes a screening of the performance of Mn-Fe-Ti based oxygen carriers, prepared with different Mn/(Mn+Fe) molar ratios in the general formula (MnyFe1-y)Ti0.15Ox. The oxygen carriers were prepared by physical mixing followed by pelletizing under pressure, calcining, crushing and sieving in the 100-300 µm particle size interval. The characterization of the carriers is based on the evaluation of their crushing strength, magnetic properties and reduction and oxidation behavior through TGA experiments at temperatures suitable for the CLC process (i.e. 850-950 °C). In addition, the main chemical structures of the Mn-Fe-Ti system were identified as a function of the Mn/(Mn+Fe) molar ratio. Oxygen uncoupling property was analyzed by reduction under a N2 atmosphere and the capability to interact with fuel gases was analyzed by using CH4, H2 and CO. Results indicate that the (MnyFe1-y)Ti0.15Ox oxygen carriers with Mn/(Mn+Fe) molar ratios of 0.55-0.87 have very promising properties for the CLC process with solid fuels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Titanium substituted manganese-ferrite as an oxygen carrier with permanent magnetic properties for chemical looping combustion of solid fuels

  • Abián, María
  • Abad, Alberto
  • Izquierdo, María T.
  • Gayán, Pilar
  • de Diego, Luis F.
  • García-Labiano, Francisco
  • Adánez, Juan
Mixed oxides of Mn-Fe have been identified as suitable materials for Chemical Looping Combustion (CLC) with solid fuels both via in-situ Gasification Chemical Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU) processes. These materials show the property of react with gaseous fuels as well as release oxygen under given conditions, while cheap metals are used. In addition, these materials can show magnetic properties that can be used for an easy separation from ash in CLC with solid fuels. Thus, losses of oxygen carrier material in the ash drain stream would be reduced. Different cations have been proposed for improving the magnetic properties of manganese ferrites, including Ti4+. In this context, the present work accomplishes a screening of (MnxFe1-x)2O3 doped with 7 wt.% TiO2, with x ranging from 0 to 1. The influence of Mn:Fe ratio on their physical and chemical properties was evaluated. In general, particles with high crushing strength values (>4 N) were obtained, and magnetic characteristics were highlighted when x ¿ 0.66. The oxygen uncoupling capability depended on the Mn:Fe ratio and the oxidation conditions, i.e. temperature and oxygen partial pressure. Broader oxidation conditions to take advantage of the oxygen uncoupling capability were found for materials with low Mn content. On contrary, the reactivity with fuel gases (CH4, H2 and CO) increased with the Mn content. Thus, oxygen carriers with Mn/(Mn + Fe) molar ratio in the 0.5–0.9 interval showed interesting properties at suitable temperatures for the iG-CLC and CLOU processes (i.e. 850–980 °C). The material with Mn/(Mn + Fe) = 0.55 was preferred considering a trade-off between reactivity and magnetic properties.