Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Combining biological processes with UV/H2O2 for metoprolol and metoprolol acid removal in hospital wastewater

  • Jaén-Gil, Adrián
  • Buttiglieri, Gianluigi
  • Benito, Aleix
  • Mir Tutusaus, Josep Anton
  • González Olmos, Rafael
  • Caminal, Gloria
  • Barceló, Damià
  • Sarrà, Montserrat
  • Rodriguez-Mozaz, Sara
The transformation products (TPs) of water contaminants generated during wastewater treatment can sometimes be equally or even more hazardous than the parent compounds. Therefore, for a comprehensive assessment of removal efficiency of a water treatment technology, it is mandatory to monitor not only the pollutants but also of their TPs. However, this type of evaluation studies is lacking in the case of water combined treatments. In this study, the elimination of metoprolol (MTP), metoprolol acid (MTPA) and the TPs generated was evaluated in pure water and hospital wastewater (HWW) using UV/H2O2 before and after fungal (FG) or conventional activated sludge (CAS). The major transformation pathways were suggested in terms of transformation of the parent compounds through bio-transformation and photo-transformation mechanisms. The results reveal an extended removal of MTP, MTPA and TPs after UV/H2O2 single experiment treating spiked pure water at 2.5 mg/L, without increasing the treated effluents toxicity. However, combined treatments were required to achieve similar removal percentages in spiked real HWW at 2.0 μg/L: while AOPs combined with FG exhibited lower removal efficiencies with generation of persistent intermediates (such as α-HMTP and TP240), AOPs combined with CAS attained the higher persistent TPs removal. In particular, AOP + CAS was classified as the most effective combination for HWW with the highest removal of the parent compounds (86% for MTP and 100% for MTPA), of the intermediates generated (up to 85%) and with a low presence of toxic TPs (such as O-DMTP). This study demonstrates that comprehensive evaluation of the intermediates generated along water treatment technologies is highly recommended to successfully evaluate their removal efficiencies., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Combining biological processes with UV/H2O2 for metoprolol and metoprolol acid removal in hospital wastewater

  • Jaén-Gil, Adrián
  • Buttiglieri, Gianluigi
  • Benito, Aleix
  • Mir Tutusaus, Josep Anton
  • González Olmos, Rafael
  • Caminal, Gloria
  • Barceló, Damià
  • Sarrà, Montserrat
  • Rodriguez-Mozaz, Sara
The transformation products (TPs) of water contaminants generated during wastewater treatment can sometimes be equally or even more hazardous than the parent compounds. Therefore, for a comprehensive assessment of removal efficiency of a water treatment technology, it is mandatory to monitor not only the pollutants but also of their TPs. However, this type of evaluation studies is lacking in the case of water combined treatments. In this study, the elimination of metoprolol (MTP), metoprolol acid (MTPA) and the TPs generated was evaluated in pure water and hospital wastewater (HWW) using UV/H2O2 before and after fungal (FG) or conventional activated sludge (CAS). The major transformation pathways were suggested in terms of transformation of the parent compounds through bio-transformation and photo-transformation mechanisms. The results reveal an extended removal of MTP, MTPA and TPs after UV/H2O2 single experiment treating spiked pure water at 2.5 mg/L, without increasing the treated effluents toxicity. However, combined treatments were required to achieve similar removal percentages in spiked real HWW at 2.0 μg/L: while AOPs combined with FG exhibited lower removal efficiencies with generation of persistent intermediates (such as α-HMTP and TP240), AOPs combined with CAS attained the higher persistent TPs removal. In particular, AOP + CAS was classified as the most effective combination for HWW with the highest removal of the parent compounds (86% for MTP and 100% for MTPA), of the intermediates generated (up to 85%) and with a low presence of toxic TPs (such as O-DMTP). This study demonstrates that comprehensive evaluation of the intermediates generated along water treatment technologies is highly recommended to successfully evaluate their removal efficiencies., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Systematic calibration of N2O emissions from a full-scale WWTP including a tracer test and a global sensitivity approach

  • Solis Duran, Borja|||0000-0003-0305-6168
  • Guisasola, Albert|||0000-0002-3012-7964
  • Pijuan Vilalta, Maria Teresa|||0000-0002-6468-6203
  • Corominas, L.
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Nitrous oxide (NO) is a greenhouse gas (GHG) emitted during biological nitrogen removal from wastewater treatment plants (WWTPs). Some modelling tools have been proposed to predict NO emissions during the design and operation of WWTPs. In this study, the novel ASM2d-NO model, which accounts for the production of NO in nutrient removal WWTPs, was used to study the associated emissions from a full-scale WWTP with two independent lines. Firstly, the hydraulics of the WWTP was characterized by a residence time distribution test, showing the flow was equally divided into the two treatment lines (49.3 vs. 50.7%), that each reactor worked as an ideal continuous stirred tank reactor and the secondary settler model flux was similar to a plug-flow reactor. The ASM2d-NO model was then calibrated using experimental data obtained under dynamic conditions. A global sensitivity analysis was used to select, among 59 model parameters, five candidates that resulted to be related to nitrifying organisms. Different parameter subsets up to four parameters were evaluated, being the subset [µ, q, K, K] the best, achieving 53.3% reduction of the calibration cost function. The model fit obtained provided a reasonably description of nutrients and NO emission trends, considering the inherent operational variability suffered in full-scale WWTPs. Finally, a simulation-based study showed that, for the given WWTP and operational conditions, an unbalanced distribution of flow-rate between the two treatment lines did not result in a significant increase on NO emissions. The results obtained show that this model can be a suitable tool for predicting NO emissions in full-scale WWTPs, and can therefore be used to find operational conditions that help to minimise these emissions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploring GHG emissions in the mainstream SCEPPHAR configuration during wastewater resource recovery

  • Solís, B.
  • Guisasola, Albert|||0000-0002-3012-7964
  • Pijuan Vilalta, Maria Teresa|||0000-0002-6468-6203
  • Baeza, Juan Antonio|||0000-0003-1290-1669
The wastewater sector paradigm is shifting from wastewater treatment to resource recovery. In addition, concerns regarding sustainability during the operation have increased. In this sense, many water utilities have become aware of the potential GHG emissions during the operation of wastewater treatment. This study assesses the nitrous oxide and methane emissions during the long-term operation of a novel wastewater resource recovery facility (WRRF) configuration: the mainstream SCEPPHAR. The long-term NO and CH emission factors calculated were in the low range of the literature, 1 % and 0.1 %, respectively, even with high nitrite accumulation in the case of NO. The dynamics and possible sources of production of these emissions are discussed. Finally, different aeration strategies were implemented to study the impact on the NO emissions in the nitrifying reactor. Results showed that operating the pilot-plant under different dissolved oxygen concentrations (between 1 and 3 g O m) did not have an effect on the NO emission factor. Intermittent aeration was the aeration strategy that most mitigated the NO emissions in the nitrifying reactor, obtaining a reduction of 40 % compared to the normal operation of the pilot plant.