Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

CFD Modeling of Reacting Diesel Sprays with Primary Reference Fuel

  • Zhou, Qiyan
  • Lucchini, Tommaso
  • D'Errico, Gianluca
  • Lu, Xingcai
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] Computational fluid dynamics (CFD) modeling has many potentials for the design and calibration of modern and future engine concepts, including facilitating the exploration of operation conditions and casting light on the involved physical and chemical phenomena. As more attention is paid to the matching of different fuel types and combustion strategies, the use of detailed chemistry in characterizing auto-ignition, flame stabilization processes and the formation of pollutant emissions is becoming critical, yet computationally intensive. Therefore, there is much interest in using tabulated approaches to account for detailed chemistry with an affordable computational cost. In the present work, the tabulated flamelet progress variable approach (TFPV), based on flamelet assumptions, was investigated and validated by simulating constant-volume Diesel combustion with primary reference fuels - binary mixtures of n-heptane and iso-octane. Simulations were initially carried out to evaluate and compare the performance of two kinetic models in homogeneous reactors and laminar diffusion flames, followed by turbulent reacting spray simulations considering different fuels, ambient temperatures, and oxygen concentrations. The sensitivity study of the turbulent Schmidt number was then conducted, and results in terms of ignition delay and lift-off length were compared with experimental data to determine a more appropriate global constant. Finally, parametric variations of ambient temperature and oxygen concentration were performed for six fuel blends ranging from PRF0 (n-heptane) to PRF100 (iso-octane), confirming the validity of the TFPV model., Authors acknowledge the financial support from the China Scholarship Council (No. 201806230180) and Natural Science Foundation of China (No. 51961135105) for the first author's study in Politecnico di Milano, Italy
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CFD analysis of combustion and emission characteristics of primary reference fuels: from transient Diesel spray to heavy-duty engine

  • Zhou, Qiyan
  • Lucchini, Tommaso
  • D'Errico, Gianluca
  • Lu, Xingcai
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] The pre-blending of low- and high-reactivity fuels for a single direct injection system has been proven to be an effective way to control the reactivity of mixtures in compression ignition engines, having the potential to simultaneously reduce fuel consumption and pollutant emissions. However, there is not much knowledge about the complex physical-chemical phenomena in the turbulent sprays with fuels having widely different autoignition qualities, although this information is critical for the design and development of cleaner combustion systems based on this concept. For this reason, a computational analysis of ignition behavior, flame structure, and soot production for reacting sprays with five primary reference fuels (PRFs), from PRF0 (n-heptane) to PRF80 (20% n-heptane, 80% iso-octane) with 20% increment in iso-octane mass fraction, was first performed using the Tabulated Flamelet Progress Variable (TFPV) approach based on the tabulation of diffusion flamelets for different scalar dissipation rates. The temporal and spatial features of the flame structure and soot formation for different fuels were investigated with the so-called intensity-axial distance-time (IXT) plots. Then, ten PRFs, from RRF0 to PRF90 with 10% increment in iso-octane mass fraction, were investigated and compared in a heavy-duty Diesel engine operating at the conventional high-temperature, short-ignition delay (HTSID) condition. The injection timing was altered from -5 to -13 degrees ATDC to optimize the combustion phase and engine performance for different fuels. The results showed that PRF70 exhibited the best performance at the tested condition, which reduced the soot mass to 5% of the baseline value without sacrificing fuel efficiency., Authors acknowledge the financial support from the China Scholarship Council (No. 201806230180) and Natural Science Foundation of China (No. 51961135105) for the first author's study in Politecnico di Milano, Italy