Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multienzymatic platform for coupling a CCU strategy to waste valorization, CO2 from iron and steel industry and crude glycerol from biodiesel production

  • Rodriguez, Sady Roberto|||0000-0002-6035-6952
  • Álvaro, Gregorio|||0000-0002-2924-8902
  • Guillén, Marina|||0000-0002-9740-9966
  • Romero, Oscar|||0000-0002-0223-5167
Ongoing climate crisis demands the development of carbon capture and utilization (CCU) technologies that emphasize simplicity, eco-sustainability, and cost-effectiveness. Enzymatic CO2 reduction emerges as an alternative to biotransforming this cheap raw material into high-value products under milder conditions. This work proposes a multienzymatic platform to reduce CO2 to formate by formate dehydrogenase (FDH) and oxidize glycerol to dihydroxyacetone (DHA) by glycerol dehydrogenase (GlyDH), allowing for efficient cofactor regeneration. Through studies such as pH operating range, enzyme stability, FDH/GlyDH ratio, and reaction medium engineering to achieve optimal soluble CO2 concentrations, the reaction with a gas mixture of 24% CO2 yielded 5.7 mM formate and 6 mM DHA after 30 h, achieving a 92.3% CO2 conversion. To evaluate the feasibility under industrially relevant conditions, a synthetic gas mixture mimicking the composition of the iron and steel industry off-gases (24.5% CO2) and crude glycerol (64% v/v) from biodiesel production was tested as substrates. The simultaneous production was successful, yielding 3.1 mM formate and 4.4 mM DHA. Formic acid was subsequently purified using liquid-liquid extraction, employing the green solvent 2-methyltetrahydrofuran (2-MTHF). For the first time to our knowledge, a CCU strategy has been successfully coupled with industrial waste valorization, obtaining two high-value molecules by means of a robust, profitable, and easily manageable multienzymatic system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Continuous Process Verification 4.0 application in upstream, adaptiveness implementation managed by AI in the hypoxic bioprocess of the Pichia pastoris cell factory

  • Gasset Franch, Arnau|||0000-0002-2583-6416
  • Wijngaarden, Joeri van|||0000-0001-5208-665X
  • Mirabent, Ferran
  • Sales Vallverdú, Albert|||0000-0002-0699-3045
  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
  • Montesinos Seguí, José Luis|||0000-0001-9941-0832
  • Manzano, Toni
  • Valero, Francisco|||0000-0003-0429-9620
The experimental approach developed in this research demonstrated how the cloud, the Internet of Things (IoT), edge computing, and Artificial Intelligence (AI), considered key technologies in Industry 4.0, provide the expected horizon for adaptive vision in Continued Process Verification (CPV), the final stage of Process Validation (PV). Pichia pastoris producing Candida rugosa lipase 1 under the regulation of the constitutive GAP promoter was selected as an experimental bioprocess. The bioprocess worked under hypoxic conditions in carbon-limited fed-batch cultures through a physiological control based on the respiratory quotient ( RQ). In this novel bioprocess, a digital twin (DT) was built and successfully tested. The implementation of online sensors worked as a bridge between the microorganism and AI models, to provide predictions from the edge and the cloud. AI models emulated the metabolism of Pichia based on critical process parameters and actionable factors to achieve the expected quality attributes. This innovative AI-aided Adaptive-Proportional Control strategy (AI-APC) improved the reproducibility comparing to a Manual-Heuristic Control strategy (MHC), showing better performance than the Boolean-Logic-Controller (BLC) tested. The accuracy, indicated by the Mean Relative Error (MRE), was for the AI-APC lower than 4%, better than the obtained for MHC (10%) and BLC (5%). Moreover, in terms of precision, the same trend was observed when comparing the Root Mean Square Deviation (RMSD) values, becoming lower as the complexity of the controller increases. The successful automatic real time control of the bioprocess orchestrated by AI models proved the 4.0 capabilities brought by the adaptive concept and its validity in biopharmaceutical upstream operations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Rewired NADPH-Dependent Redox Shuttle for Testing Peroxisomal Compartmentalization of Synthetic Metabolic Pathways in Komagataella phaffii

  • Fina Romero, Albert|||0000-0001-7949-0484
  • Àvila-Cabré, Sílvia|||0000-0001-6179-4877
  • Vázquez Pereira, Enrique|||0000-0002-0561-9000
  • Albiol i Sala, Joan|||0000-0001-5626-429X
  • Ferrer, Pau|||0000-0002-5287-4127
The introduction of heterologous pathways into microbial cell compartments offers several potential advantages, including increasing enzyme concentrations and reducing competition with native pathways, making this approach attractive for producing complex metabolites like fatty acids and fatty alcohols. However, measuring subcellular concentrations of these metabolites remains technically challenging. Here, we explored 3-hydroxypropionic acid (3-HP), readily quantifiable and sharing the same precursors-acetyl-CoA, NADPH, and ATP-with the above-mentioned products, as a reporter metabolite for peroxisomal engineering in the yeast Komagataella phaffii. To this end, the malonyl-CoA reductase pathway for 3-HP production was targeted into the peroxisome of K. phaffii using the PTS1-tagging system, and further tested with different carbon sources. Thereafter, we used compartmentalized 3-HP production as a reporter system to showcase the impact of different strategies aimed at enhancing the peroxisomal NADPH pool. Co-overexpression of genes encoding a NADPH-dependent redox shuttle from Saccharomyces cerevisiae (IDP2 / IDP3) significantly increased 3-HP yields across all substrates, whereas peroxisomal targeting of the S. cerevisiae NADH kinase Pos5 failed to improve 3-HP production. This study highlights the potential of using peroxisomal 3-HP production as a biosensor for evaluating peroxisomal acetyl-CoA and NAPDH availability by simply quantifying 3-HP, demonstrating its potential for peroxisome-based metabolic engineering in yeast.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metabolic engineering of Komagataella phaffii for enhanced 3-hydroxypropionic acid (3-HP) production from methanol

  • Àvila-Cabré, Sílvia|||0000-0001-6179-4877
  • Albiol i Sala, Joan|||0000-0001-5626-429X
  • Ferrer, Pau|||0000-0002-5287-4127
Bioconversion of methanol derived from CO reduction into value-added chemicals provides a unique approach for mitigating global warming and reducing fossil fuels dependence. Production of 3-hydroxypropionic acid (3-HP), a key building block for the development of biobased products such as acrylates and 1,3-propanediol, has been successfully achieved using methanol as the sole carbon and energy source in the methylotrophic yeast Komagataella phaffii (syn. Pichia pastoris). However, challenges remain in meeting commercially relevant concentrations, yields and productivities of 3-HP, prompting further strain optimization. In the present study, we have combined metabolic engineering strategies aiming at increasing metabolic precursors supply and redirecting carbon flux towards 3-HP production. A combinatorial metabolic engineering strategy targeting precursors supply and 3-HP export was applied to the original 3-HP producing K. phaffii strain harboring the synthetic β-alanine pathway and a mutated NADP-dependent formate dehydrogenase from Pseudomonas sp. 101 (PseFDH(V9)). To do so, several genes encoding enzymes catalyzing reactions immediately upstream of the β-alanine pathway were overexpressed to enhance precursors availability. However, only the overexpression of the pyruvate carboxylase PYC2 gene significantly increased the 3-HP yield on biomass (Y) in small-scale cultivations. Co-overexpression of PYC2 and the lactate permeases ESBP6 and JEN1 genes led to a 55% improvement in 3-HP titer and product yield in methanol deep-well plate cultures compared to the reference strain, mostly due to Esbp6 activity, proving its effectiveness as a 3-HP transporter. Deletion of the native formate dehydrogenase gene FDH1 did not increase methanol flux entering the assimilatory pathway. Instead, knockout strains showed severe growth defects due to toxic intermediates accumulation. Co-expression of the PseFDH(V9) encoding gene in these strains failed to compensate for the loss of the native FDH. The strain combining PYC2, ESBP6, and JEN1 overexpression was further tested in fed-batch cultures at pH 5, achieving a 3-HP concentration of 27.0 g l - 1, with a product yield of 0.19 g g - 1, and a volumetric productivity of 0.56 g l - 1 h - 1 for the methanol feeding phase of the cultivations. These results represent a 42% increase in final concentration and over 20% improvement in volumetric productivity compared to the original 3-HP-producing strain. Furthermore, bioreactor-scale cultivations at pH 3.5 revealed increased robustness of the strains overexpressing monocarboxylate transporters. Our results point out the potential of lactate transporters to efficiently drive 3-HP export in K. phaffii, leading to higher titers, yields, and productivities, even at lower pH conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Targeted knockdown of ATM, ATR, and PDEδ increases Gag HIV-1 VLP production in HEK293 cells

  • Díaz-Maneh, Andy|||0000-0002-5259-8070
  • Pérez-Rubio, Pol|||0000-0002-9892-6762
  • Rigau Granes, Cristina
  • Bosch Molist, Laia|||0000-0002-9970-0490
  • Lavado-García, Jesús|||0000-0001-9993-6332
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Cervera Gracia, Laura|||0000-0002-3639-2793
Several strategies have been developed in recent years to improve virus-like particle (VLP)-based vaccine production processes. Among these, the metabolic engineering of cell lines has been one of the most promising approaches. Based on previous work and a proteomic analysis of HEK293 cells producing Human Immunodeficiency Virus-1 (HIV-1) Gag VLPs under transient transfection, four proteins susceptible of enhancing VLP production were identified: ataxia telangiectasia mutated (ATM), ataxia telangiectasia and rad3-related (ATR), DNA-dependent protein kinase catalytic subunit (DNA-PKcs), and retinal rod rhodopsin-sensitive cGMP 3',5'-cyclic phosphodiesterase subunit delta (PDEδ). The knockdown of ATM, ATR, and PDEδ in HEK293 cells increased HIV-1 VLP titers in the supernatant by 3.4-, 2.1-, and 2.2-fold, respectively. Also, possible metabolic synergies between plasmids were investigated by statistical design of experiments (DoE), enabling us to identify the optimal production strategy, that was further demonstrated at lab-scale stirred tank bioreactor operated in perfusion, significantly increasing both VLPs specific and volumetric productivities to 8.3 × 103 VLPs/cellxday and 7.5 × 1012 VLPs/Lxday, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Gag HIV-1 Virus-like Particles and Extracellular Vesicles Functionalization with Spike Epitopes of SARS-CoV-2 Using a Copper-Free Click Chemistry Approach

  • García-Trujillo, Marc|||0000-0002-5466-7703
  • Lavado-García, Jesús|||0000-0001-9993-6332
  • Boix-Besora, Arnau|||0000-0002-3706-4265
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Cervera Gracia, Laura|||0000-0002-3639-2793
Enveloped nanoparticles such as extracellular vesicles (EVs) and virus-like particles (VLPs) have emerged as promising nanocarriers capable of transporting bioactive molecules for drug delivery and vaccination. Optimized functionalization methodologies are required to increase the functionalization levels of these nanoparticles, enhancing their performance. Here, a bioorthogonal copper-free strain-promoted azide-alkyne cycloaddition (SPAAC) reaction has been optimized to functionalize human immunodeficiency virus type 1 (HIV-1) Gag-based VLPs and EVs. The optimization process has been carried out through reaction kinetics and design of experiments (DoE) using Cy5 as a reporter molecule. The functionalization of both VLPs and EVs has been studied using super-resolution fluorescence microscopy (SRFM), revealing remarkable differences between Gag-VLPs and coproduced EVs. EVs produced by mock transfection and cell growth have been functionalized achieving a mean of 3618.63 ± 48.91 and 6498.75 ± 352.71 Cy5 molecules covalently linked per particle (Cy5/particle), respectively. Different nanoparticles have been functionalized with two linear B-cell epitopes from the Spike protein of SARS-CoV-2, S TSNFRVQPTESIVRFPNITNLCPF and S GCLIGAEHVNNSYECD, and analyzed by an immunoassay with sera from COVID-19 patients. The obtained results validate the selected B-cell epitopes and highlight the potential of the optimized functionalization approach for the development of nanoparticle-based vaccines.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enzyme-Powered CO₂ Utilization, A Bifunctional Immobilized Biocatalyst for Intensified CCU of Industrial Feedstocks to High-Value Chemicals

  • Rodriguez, Sady Roberto|||0000-0002-6035-6952
  • Romero, Oscar|||0000-0002-0223-5167
  • Guillén, Marina|||0000-0002-9740-9966
Decarbonizing industry demands a shift from high-energy fossil carbon to more sustainable green processes that valorize CO as a waste product. In this context, biocatalysis offers a promising approach for integrating Carbon Capture and Utilization (CCU) with the conversion of industrial waste into value-added chemicals. To facilitate the transition from bench-scale experiments to industrial-scale CCU, enzyme immobilization plays a crucial role by enhancing biocatalyst stability, reuse, and overall reaction efficiency. This study explores an industrially relevant multienzyme CCU platform to valorize CO and glycerol by developing a bifunctional biocatalyst through a one-step sequential purification/coimmobilization strategy using formate dehydrogenase (FDH) and glycerol dehydrogenase (GlyDH) for the coproduction of formate and dihydroxyacetone (DHA), with in situ cofactor regeneration. The obtained biocatalyst was optimized for stability and activity, and its performance was first evaluated using pure substrates, as well as under industrially relevant conditions with a crude gas mixture mimicking emissions from iron and steel industry and crude glycerol from biodiesel production. The results demonstrate the feasibility of this system for sustainable CO conversion, achieving the highest formate concentrations reported to date via enzymatic catalysis, 50.4 ± 0.3 mM (2.3 g L). Similarly, the valorization of crude glycerol into DHA was achieved, along with glycerol carbonate as a byproduct. The biocatalyst-enabled reaction intensification with significant yields for all products improved stability and reusability over five reaction cycles and reduced inhibition. The successful production of three high-value molecules was achieved through a CCU approach aimed at the valorization of industrial waste.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Towards a resource friendly circular cotton processing, From carbohydrate rich wastewaters to hydrogen peroxide using carbohydrate oxidases

  • Fredes Tapia, Yerko Andre|||0000-0002-3144-9949
  • Álvaro, Gregorio|||0000-0002-2924-8902
  • Guillén, Marina|||0000-0002-9740-9966
  • Romero, Oscar|||0000-0002-0223-5167
One of the main concerns in the textile cotton industry is the substantial amount of contaminated effluent generated from various stages, including desizing and pre-wash. The wastewater, rich in carbohydrates from starch hydrolysis, presents a promising feedstock for hydrogen peroxide (H2O2) production, a crucial component in cotton fabric bleaching. this study, comprehensively characterized various cotton processing wastewater, evaluating their total sugar content and carbohydrate profile. Based on the results, wastewater from the pre-washer emerged as the most suitable for enzymatic H2O2 production. Given the variability in carbohydrate profile of wastewater, two strategies based on the carbohydrate oxidase promiscuity were developed: N-acetylglucosamine oxidase (NagOx), specific for glucose, and Cellobiose oxidase (COX), displaying a high carbohydrate promiscuity. A pretreatment with glucoamylases was employed to increase glucose levels for NagOX, while COX was directly applied towards untreated wastewater. pH control was assessed for both systems. Results indicated NagOX's performance was enhanced by pH control, unlike COX. The robustness and flexibility of both proposed strategies were validated using diverse batches industrial wastewaters samples, confirming the efficacy of the proposed enzymatic-based hydrogen peroxide production processes. Biobleaching tests were conducted, revealing an impact of wastewater color on the bleaching process. However, the use of a hydrogen peroxide activator (TAED) emerged as a promising approach to implement the proposed strategies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Proof-of-Concept for Cell Culture-Based Duck Fat Production on a Laboratory Scale

  • Díaz-Maneh, Andy|||0000-0002-5259-8070
  • Camacho Sucarrats, Andreu|||0009-0004-8329-4469
  • Fuenmayor, J.|||0000-0002-6254-8034
  • Ilic, Natasa|||0000-0001-5987-2805
  • García Aranda, Natalia|||0000-0003-3230-9881
  • Enciso, Yuliana
  • Notari, Mario|||0000-0001-7695-4415
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Lavado-García, Jesús|||0000-0001-9993-6332
  • Revilla-Sánchez, Raquel|||0000-0003-3115-2587
Cultured meat has been gaining ground in recent years as an innovative approach to address the potential scarcity of meat supply. Fat is one of the key components of meat in terms of flavor and juiciness. However, the production and scale-up of fat from agriculturally relevant animals have not been extensively investigated, particularly in scalable bioreactor systems. The culture of primary duck embryonic fibroblast (DEF) proliferation and adipogenesis in various lab-scale bioreactors for cultured meat purposes was explored. Cytodex 1 microcarriers were used to culture DEF in two proprietary serum-free media: ProDuck4.0 for proliferation and LipoDuck2.0 for adipogenesis. Proliferation and differentiation conditions of DEF were optimized in shake flasks through Design of Experiments (DoE) and then the culture was transferred to lab-scale bioreactors operating in perfusion with different agitation regimes. A rocking motion bioreactor (RMB), an orbitally shaken bioreactor (OSB), and a stirred tank bioreactor (STB) were assessed to scale up the production process. Results showed that DEFs exhibited high sensitivity to shear stress, particularly in RMB and OSB systems, which led to impaired cell growth. In contrast, STB supported DEF proliferation and adipogenic differentiation, reaching full confluency and a cell concentration of 489,000 cells·mL and an intracellular triglyceride accumulation of 380 pg·cell, comparable to those achieved in shake flasks. These findings highlight the potential of using STBs for scaling up duck fat production for cultured meat applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing Multi-Enzymatic CO2 Conversion via Reactor Engineering, Effects of Mass Transfer on Sustainable and Green Metrics

  • Rodriguez, Sady Roberto|||0000-0002-6035-6952
  • Guillén, Marina|||0000-0002-9740-9966
  • Romero, Oscar|||0000-0002-0223-5167
The global energy transition toward decarbonization requires highly efficient Carbon Capture and Utilization (CCU) technologies that combine economic feasibility, operational stability and environmental sustainability. A key factor for successful CCU is efficient CO2 gas-liquid transfer, which can be optimized through tailored reactor designs to maximize yields and utilization. Technological advances such as CO2-specific sensors have enabled accurate monitoring of CO2 mass balance enhancing the efficiency of its conversion. This work addresses an in-depth analysis of CO2 mass transfer in a stirred-tank reactor, focusing on the impact of volumetric gas flow rate on gas-liquid transfer during the multi-enzymatic conversion of CO2 into high-value compounds using a co-immobilized biocatalyst of formate dehydrogenase and glycerol dehydrogenase enzymes. The volumetric mass transfer coefficient (kLa) was determined at different gas flow rates (1, 0.5 and 0.1 vvm) from a 24% CO2 gas mixture, with the reaction carried out at 0.1 vvm achieving an outstanding formate production of 66.1 ± 1.4 mM (3 g L-1), due to near-neutral pH conditions that improved the reaction conditions and enhanced biocatalyst stability by at least 1.8-fold compared with high gas flow rate (1.0 vvm). Furthermore, a remarkable CO2 capture efficiency of 93.3 ± 2.1% was achieved at 0.1 vvm, along with a high selectivity toward formate and glycerol carbonate, reflecting a complete CO2 conversion into target products. Finally, the environmental impact of the reaction at 0.1 vvm showed a lower contribution to climate change, reaching 13.2 kg CO2 eq kg products⁻1. These results underscore enzymatic CO2 reduction as an effective and sustainable approach for the development of bio-based industrial processes with a markedly reduced environmental footprint.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Key challenges and limitations in enzymatic biodiesel production

  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
  • Canet, Albert|||0009-0000-8487-8176
  • Valero, Francisco|||0000-0003-0429-9620
Biodiesel, composed of methyl or ethyl esters of vegetable oils and animal fats, emerged as a promising alternative to conventional fossil fuels. Research into its potential began in the early 1980s, and over the subsequent decades, its production and application have become increasingly established. While industrial-scale biodiesel is predominantly produced through chemical catalysis, enzymatic approaches have attracted considerable attention due to their potential advantages, including milder reaction conditions and the ability to process waste feedstocks. Despite these benefits and extensive research efforts, the industrial implementation of enzymatic biodiesel production remains limited. This review summarizes the current state of enzymatic biodiesel production and highlights the main challenges to its large-scale implementation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Immobilized Hydroxymethylfurfural Oxidase Enables Robust Biocatalytic Production of 2,5-Furandicarboxylic Acid from Crude 5-Hydroxymethylfurfural

  • Concha, Darly|||0000-0003-2823-5437
  • Ortiz-Orruño, Garazi|||0000-0001-6013-7920
  • Guillén, Marina|||0000-0002-9740-9966
  • Romero, Oscar|||0000-0002-0223-5167
  • Bonet-Ragel, Kírian|||0000-0002-0041-7493
Bioplastics such as poly(ethylene 2,5-furandicarboxylate) (PEF), synthesized from biobased 2,5-furandicarboxylic acid (FDCA), offer a promising alternative to petrochemical-derived plastics. Enzymatic conversion of 5-hydroxymethylfurfural (HMF) to FDCA via hydroxymethylfurfural oxidase (HMFO) is environmentally benign but is limited by catalyst stability. This study addresses these challenges through a high-performance biocatalytic platform based on the one-step purification and immobilization of the engineered enzyme 8BxHMFO fused with a carbohydrate-binding module (CBM3). Utilizing the high affinity of CBM3 for microcrystalline cellulose (Perloza MT100), the biocatalyst achieved a significant increase in thermal stability (Tm = 53.2 °C) and enhanced resistance to oxygen interfacial inactivation. The system's efficacy was demonstrated with pure HMF (>95% conversion; 7.2 g·L-1 FDCA), and its robustness was validated using a 15% (w/w) crude extract. The biocatalyst maintained its catalytic performance in the presence of minor matrix components, exhibiting a highly competitive FDCA yield (70.6%) and titer (5.7 g·L-1). FDCA recovery was achieved with 72% efficiency using a mild ethanol-based extraction process. These findings and sustainable indicators validate the robustness of the system under realistic conditions, demonstrating its potential as a sustainable platform for FDCA production and contributing to broader PEF bioplastic adoption.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Carbonic anhydrase boosts multi-step CO2 conversion, A synergistic approach of co-immobilized enzymes for CO2 valorization

  • Rodriguez, Sady Roberto|||0000-0002-6035-6952
  • Maciel, Ayanne De Oliveira
  • Romero, Oscar|||0000-0002-0223-5167
  • Guillén, Marina|||0000-0002-9740-9966
  • Antonopoulou, Io|||0000-0002-7754-9398
Carbon dioxide (CO2) is an underutilized industrial byproduct whose conversion into valuable molecules is mainly constrained by slow gas-liquid transfer. Carbonic anhydrase (CA) efficiently accelerates CO2 hydration to bicarbonate, increasing its availability in the liquid phase. Therefore, integrating CA into CO2 bioconversion processes is a promising strategy for Carbon Capture and Utilization (CCU). This study investigates CA's role in enhancing CO2 mass transfer in a multi-enzymatic platform comprising the co-immobilized formate dehydrogenase (FDH) for CO2 reduction to formate and glycerol dehydrogenase (GlyDH) for in situ NADH regeneration via glycerol oxidation to dihydroxyacetone (DHA). Three microbial CA variants were screened, identifying Bacillus halodurans CA (BhCA) as the best candidate due to boosted formate production, immobilization on Ni2+-ReliZyme, and operational stability. Consequently, a novel trifunctional biocatalyst was rationally prepared from crude cell lysates using a one-step purification / co-immobilization strategy, enabling controlled enzyme incorporation at optimal activity ratios and yielding a streamlined, cost-effective, and industrially relevant biocatalyst with high catalytic performance. In the reaction, BhCA significantly enhanced CO2 reduction to formate by FDH, increasing yield by up to 1.8-fold and reaction rate by up to 4.3-fold. This synergy with FDH arises from CA-mediated stabilization of the CO2-bicarbonate interconversion, which enhances gas-liquid transfer and promotes CO2 reduction. Reusability tests showed remarkable stability with BhCA retaining 63.5 ± 0.8% of its activity and achieving 80.3 ± 1.9% formate yield after five cycles. Overall, CA acts as an effective intensifier for bio-based CCU, boosting both CO2 capture and its conversion into high-value products within multi-enzymatic platforms.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Gag Virus-like Particles Functionalized with SARS-CoV-2 Variants: Generation, Characterization and Recognition by COVID-19 Convalescent Patients' Sera

  • Boix-Besora, Arnau|||0000-0002-3706-4265
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Cervera Gracia, Laura|||0000-0002-3639-2793
The robustness, safety, versatility, and high immunogenicity of virus-like particles (VLPs) make them a promising approach for the generation of vaccines against a broad range of pathogens. VLPs are recombinant macromolecular structures that closely mimic the native conformation of viruses without carrying viral genetic material. Particularly, HIV-1 Gag-based VLPs are a suitable platform for the presentation of the SARS-CoV-2 Spike (S) protein on their surface. In this context, this work studies the effect of different rationally engineered mutations of the S protein to improve some of its characteristics. The studied variants harbored mutations such as proline substitutions for S stabilization, D614G from the early dominant pandemic form, the elimination of the S1/S2 furin cleavage site to improve S homogeneity, the suppression of a retention motif to favor its membrane localization, and cysteine substitutions to increase its immunogenicity and avoid potential undesired antibody-dependent enhancement (ADE) effects. The influence of the mutations on VLP expression was studied, as well as their immunogenic potential, by testing the recognition of the generated VLP variants by COVID-19 convalescent patients' sera. The results of this work are conceived to give insights on the selection of S protein candidates for their use as immunogens and to showcase the potential of VLPs as carriers for antigen presentation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering the synthetic β-alanine pathway in Komagataella phaffii for conversion of methanol into 3-hydroxypropionic acid

  • Àvila-Cabré, Sílvia|||0000-0001-6179-4877
  • Pérez-Trujillo, Míriam|||0000-0002-6919-7417
  • Albiol i Sala, Joan|||0000-0001-5626-429X
  • Ferrer, Pau|||0000-0002-5287-4127
Methanol is increasingly gaining attraction as renewable carbon source to produce specialty and commodity chemicals, as it can be generated from renewable sources such as carbon dioxide (CO2). In this context, native methylotrophs such as the yeast Komagataella phaffii (syn Pichia pastoris) are potentially attractive cell factories to produce a wide range of products from this highly reduced substrate. However, studies addressing the potential of this yeast to produce bulk chemicals from methanol are still scarce. 3-Hydroxypropionic acid (3-HP) is a platform chemical which can be converted into acrylic acid and other commodity chemicals and biopolymers. 3-HP can be naturally produced by several bacteria through different metabolic pathways.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synergic kinetic and physiological control to improve the efficiency of Komagataella phaffii recombinant protein production bioprocesses

  • Sales Vallverdú, Albert|||0000-0002-0699-3045
  • Gasset Franch, Arnau|||0000-0002-2583-6416
  • Requena Moreno, Guillermo|||0009-0005-1231-4028
  • Valero, Francisco|||0000-0003-0429-9620
  • Montesinos Seguí, José Luis|||0000-0001-9941-0832
  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
The yeast Komagataella phaffii (Pichia pastoris) is currently considered a versatile and highly efficient host for recombinant protein production (RPP). Interestingly, the regulated application of specific stress factors as part of bioprocess engineering strategies has proven potential for increasing the production of recombinant products. This study aims to evaluate the impact of controlled oxygen-limiting conditions on the performance of K. phaffii bioprocesses for RPP in combination with the specific growth rate (μ) in fedbatch cultivations. In this work, Candida rugosa lipase 1 (Crl1) production, regulated by the constitutive GAP promoter, growing at different nominal μ (0.030, 0.065, 0.100 and 0.120h-1) under both normoxic and hypoxic conditions in carbon-limiting fed-batch cultures is analysed. Hypoxic fermentations were controlled at a target respiratory quotient (RQ) of 1.4, with excellent performance, using an innovative automated control based on the stirring rate as the manipulated variable developed during this study. The results conclude that oxygen limitation positively affects bioprocess efficiency under all growing conditions compared. The shift from respiratory to respiro-fermentative metabolism increases bioprocess productivity by up to twofold for the specific growth rates evaluated. Moreover, the specific product generation rate (qp) increases linearly with μ, regardless of oxygen availability. Furthermore, this hypoxic boosting effect was also observed in the production of Candida antarctica lipase B (CalB) and pro-Rhizopus oryzae lipase (proRol), thus proving the synergic effect of kinetic and physiological stress control. Finally, the Crl1production scale-up was conducted successfully, confirming the strategy's scalability and the robustness of the results obtained at the bench-scale level.