Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Overexpression of the transcriptional activators Mxr1 and Mit1 enhances lactic acid production on methanol in Komagataella phaffii

  • Bachleitner, Simone|||0000-0002-0048-5701
  • Mølgaard Severinsen, Manja
  • Lutz, Gregor
  • Mattanovich, Diethard|||0000-0002-0907-4167
A bio-based production of chemical building blocks from renewable, sustainable and non-food substrates is one key element to fight climate crisis. Lactic acid, one such chemical building block is currently produced from first generation feedstocks such as glucose and sucrose, both requiring land and water resources. In this study we aimed for lactic acid production from methanol by utilizing Komagataella phaffii as a production platform. Methanol, a single carbon source has potential as a sustainable substrate as technology allows (electro)chemical hydrogenation of CO2 for methanol production. Here we show that expression of the Lactiplantibacillus plantarum derived lactate dehydrogenase leads to L-lactic acid production in Komagataella phaffii, however, production resulted in low titers and cells subsequently consumed lactic acid again. Gene expression analysis of the methanol-utilizing genes AOX1, FDH1 and DAS2 showed that the presence of lactic acid downregulates transcription of the aforementioned genes, thereby repressing the methanol-utilizing pathway. For activation of the methanol-utilizing pathway in the presence of lactic acid, we constructed strains deficient in transcriptional repressors Nrg1, Mig1-1, and Mig1-2 as well as strains with overrepresentation of transcriptional activators Mxr1 and Mit1. While loss of transcriptional repressors had no significant impact on lactic acid production, overexpression of both transcriptional activators, MXR1 and MIT1, increased lactic acid titers from 4 g L-1 to 17 g L-1 in bioreactor cultivations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Efficient production of itaconic acid from the single-carbon substrate methanol with engineered Komagataella phaffii

  • Severinsen, Manja Mølgaard
  • Bachleitner, Simone|||0000-0002-0048-5701
  • Modenese, Viola
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Background: Amidst the escalating carbon dioxide levels resulting from fossil fuel consumption, there is a pressing need for sustainable, bio-based alternatives to underpin future global economies. Single-carbon feedstocks, derived from CO2, represent promising substrates for biotechnological applications. Especially, methanol is gaining prominence for bio-production of commodity chemicals.Results: In this study, we show the potential of Komagataella phaffii as a production platform for itaconic acid using methanol as the carbon source. Successful integration of heterologous genes from Aspergillus terreus (cadA, mttA and mfsA) alongside fine-tuning of the mfsA gene expression, led to promising initial itaconic acid titers of 28 g·L-1 after 5 days of fed-batch cultivation. Through the combined efforts of process optimization and strain engineering strategies, we further boosted the itaconic acid production reaching titers of 55 g·L-1 after less than 5 days of methanol feed, while increasing the product yield on methanol from 0.06 g·g-1 to 0.24 g·g-1.Conclusion: Our results highlight the potential of K. phaffii as a methanol-based platform organism for sustainable biochemical production.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Free-Standing Carbon Nanofiber Films with Supported Cobalt Phosphide Nanoparticles as Cathodes for Hydrogen Evolution Reaction in a Microbial Electrolysis Cell

  • Pérez-Pi, Gerard
  • Luque-Rueda, Jorge|||0009-0007-6123-5267
  • Bosch Jiménez, Pau
  • Borràs Camps, Eduard|||0000-0002-3147-7835
  • Martínez-Crespiera, Sandra|||0000-0002-9284-8521
High-performance and cost-efficient electrocatalysts and electrodes are needed to improve the hydrogen evolution reaction (HER) for the hydrogen (H2) generation in electrolysers, including microbial electrolysis cells (MECs). In this study, free-standing carbon nanofiber (CNF) films with supported cobalt phosphide nanoparticles have been prepared by means of an up-scalable electrospinning process followed by a thermal treatment under controlled conditions. The produced cobalt phosphide-supported CNF films show to be nanoporous (pore volume up to 0.33 cm3 g-1) with a high surface area (up to 502 m2 g-1) and with a suitable catalyst mass loading (up to 0.49 mg cm-2). Values of overpotential less than 140 mV at 10 mA cm-2 have been reached for the HER in alkaline media (1 M KOH), which demonstrates a high activity. The high electrical conductivity together with the mechanical stability of the free-standing CNF films allowed their direct use as cathodes in a MEC reactor, resulting in an exceptionally low voltage operation (0.75 V) with a current density demand of 5.4 A m-2. This enabled the production of H2 with an energy consumption below 30 kWh kg-1 H2, which is highly efficient.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Electrochemical CO2 Reduction, Commercial Innovations and Prospects

  • Varhade, Swapnil|||0000-0003-4202-9883
  • Guruji, Avni|||0009-0000-6059-8401
  • Singh, Chandani|||0000-0001-9913-0304
  • Cicero, Giancarlo|||0000-0002-2920-9882
  • García-Melchor, Max|||0000-0003-1348-4692
  • Helsen, Joost|||0000-0001-9017-7210
  • Pant, Deepak|||0000-0002-1425-9588
Sustainability is an imperative requirement in this era, with electrocatalytic power into fuels technologies emerging as a significant route toward sustainable chemistry. One of the focus areas within the chemical industry is capture of carbon dioxide (CO2) and its electrochemical reduction (eCO2RR) into economically viable commodities through the utilization of renewable sources. Despite some specific eCO2RR technologies being poised for market introduction, the development of a comprehensive technology for eCO2RR remains a challenge. While certain technologies targeting specific eCO2RR products are on the verge of deployment, substantial efforts are still necessary to transition and establish presence in the market over conventional technologies. This review highlights recent technological advancements, fundamental studies, and the persisting challenges from an industrial perspective. We take a deep dive into the research methodologies, strategies, challenges, and advancements in the development of applications for eCO2RR. Specifically, three eCO2RR products - CO, HCOOH, and C2H4 - as promising candidates for implementation are elaborated based on techno-economic considerations. Additionally, the review discusses the industrial blueprint for these products, aiming to streamline their path toward commercialization. The intent is to present the status of eCO2RR, offering insights into its potential transformation from a mere laboratory curiosity to a feasible technology for industrial chemical synthesis.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Metabolic engineering of Komagataella phaffii for enhanced 3-hydroxypropionic acid (3-HP) production from methanol

  • Àvila-Cabré, Sílvia|||0000-0001-6179-4877
  • Albiol i Sala, Joan|||0000-0001-5626-429X
  • Ferrer, Pau|||0000-0002-5287-4127
Bioconversion of methanol derived from CO reduction into value-added chemicals provides a unique approach for mitigating global warming and reducing fossil fuels dependence. Production of 3-hydroxypropionic acid (3-HP), a key building block for the development of biobased products such as acrylates and 1,3-propanediol, has been successfully achieved using methanol as the sole carbon and energy source in the methylotrophic yeast Komagataella phaffii (syn. Pichia pastoris). However, challenges remain in meeting commercially relevant concentrations, yields and productivities of 3-HP, prompting further strain optimization. In the present study, we have combined metabolic engineering strategies aiming at increasing metabolic precursors supply and redirecting carbon flux towards 3-HP production. A combinatorial metabolic engineering strategy targeting precursors supply and 3-HP export was applied to the original 3-HP producing K. phaffii strain harboring the synthetic β-alanine pathway and a mutated NADP-dependent formate dehydrogenase from Pseudomonas sp. 101 (PseFDH(V9)). To do so, several genes encoding enzymes catalyzing reactions immediately upstream of the β-alanine pathway were overexpressed to enhance precursors availability. However, only the overexpression of the pyruvate carboxylase PYC2 gene significantly increased the 3-HP yield on biomass (Y) in small-scale cultivations. Co-overexpression of PYC2 and the lactate permeases ESBP6 and JEN1 genes led to a 55% improvement in 3-HP titer and product yield in methanol deep-well plate cultures compared to the reference strain, mostly due to Esbp6 activity, proving its effectiveness as a 3-HP transporter. Deletion of the native formate dehydrogenase gene FDH1 did not increase methanol flux entering the assimilatory pathway. Instead, knockout strains showed severe growth defects due to toxic intermediates accumulation. Co-expression of the PseFDH(V9) encoding gene in these strains failed to compensate for the loss of the native FDH. The strain combining PYC2, ESBP6, and JEN1 overexpression was further tested in fed-batch cultures at pH 5, achieving a 3-HP concentration of 27.0 g l - 1, with a product yield of 0.19 g g - 1, and a volumetric productivity of 0.56 g l - 1 h - 1 for the methanol feeding phase of the cultivations. These results represent a 42% increase in final concentration and over 20% improvement in volumetric productivity compared to the original 3-HP-producing strain. Furthermore, bioreactor-scale cultivations at pH 3.5 revealed increased robustness of the strains overexpressing monocarboxylate transporters. Our results point out the potential of lactate transporters to efficiently drive 3-HP export in K. phaffii, leading to higher titers, yields, and productivities, even at lower pH conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Into the metabolic wild, Unveiling hidden pathways of microbial metabolism

  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Microbial metabolism has been deeply studied over decades and it is considered to be understood to a great extent. Annotated genome sequences of many microbial species have contributed a lot to generating biochemical knowledge on metabolism. However, researchers still discover novel pathways, unforeseen reactions or unexpected metabolites which contradict to the expected canon of biochemical reactions in living organisms. Here, we highlight a few examples of such non-canonical pathways, how they were found, and what their importance in microbial biotechnology may be. The predictive power of metabolic modelling, well-founded on biochemical knowledge and genomic information is discussed in the light of both discovery of yet unknown existing metabolic routes and the prediction of others, new to Nature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluation of single chamber electrochemical reduction of CO2 to formate for application under biocompatible conditions

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Haus, Philip
  • Izadi, Paniz|||0000-0002-9427-8171
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Harnisch, Falk|||0000-0002-0014-4640
  • Guisasola, Albert|||0000-0002-3012-7964
The electrochemical CO2 reduction reaction (eCO2RR) facilitates high rates and yields for the selective production of formate, a quintessential C1-compound that can serve as a valuable carbon and energy source for biosynthesis. The use of double-chamber (DC) electrochemical cells with membranes is deemed essential to avoid mixing of electrochemical products (i.e. anodic oxygen and cathodic formate) and thus cross-reactions that lower yields, Faradaic efficiency (FE) and effective rate. However, single-chamber (SC) setups for eCO2RR can be more suitable to combine with bioprocesses. This work comprehensively evaluates, using different experimental set-ups, the conditions under which SC operation can obtain results comparable to DC systems. At a 50 mL scale, under biocompatible conditions, formate production in the SC setup achieved a 14 % reduction in the production rate (146 mg L-1 h-1 for SC and 170 mg L-1 h-1 for DC) and a 15 % decrease in FE (72.2 % in SC and 84.7 % in DC). The highest formate concentration produced in 24 h SC experiments was 1.8 g·L-1 with FE of 41 %, a concentration appropriate for fermentation processes. The SC operation of eCO2RR to formate without a membrane could reduce energy losses and capital costs, although at the cost of an expected reduction in rate and FE.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Advancing yeast metabolism for a sustainable single carbon bioeconomy

  • Kuzman, Miriamb
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Single carbon (C1) molecules are considered as valuable substrates for biotechnology, as they serve as intermediates of carbon dioxide recycling, and enable bio-based production of a plethora of substances of our daily use without relying on agricultural plant production. Yeasts are valuable chassis organisms for biotech production, and they are able to use C1 substrates either natively or as synthetic engineered strains. This minireview highlights native yeast pathways for methanol and formate assimilation, their engineering, and the realization of heterologous C1 pathways including CO2, in different yeast species. Key features determining the choice among C1 substrates are discussed, including their chemical nature and specifics of their assimilation, their availability, purity, and concentration as raw materials, as well as features of the products to be made from them.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochemical and bioelectrochemical ammonium recovery from N-loaded streams using a hydrophobic membrane

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Galeano, Mariella Belen
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Baeza, Mireia|||0000-0002-2240-6410
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Bioelectrochemical systems enable the recovery of ammonium from wastewater with low energy requirements and as a concentrated nitrogen-rich stream. This work aims to thoroughly investigate different cathodic electrode configurations and to optimize the operational conditions for active ammonium recovery from synthetic wastewater as concentrated ammonium sulphate. Different applied current intensities (50 mA, corresponding to 5 A m, and 75 mA, corresponding to 7.5 A m) and initial ammonium concentrations (between 0.3 and 3 g L N-NH ) were tested in an abiotic electrochemical system to understand the upper threshold of the used three-chamber configuration with hydrophobic membrane in terms of ammonium recovery rate (R). With an external current of 75 mA, the highest value was 55 gN-NH m d when removing 97 % from an initial ammonium concentration of 3 g L. Bioelectrochemical ammonium removal/recovery was evaluated under different applied potentials (0.8, 1.0, 1.2, and 1.4 V) using two configurations: a Nickel-based gas diffusion electrode (GDE) and a configuration with the cathode (stainless steel or nickel foam) physically separated from the hydrophobic membrane. The highest removal rate (R) (21 gN-NH m d) was exhibited for stainless steel cathode at 1.4 V mainly due to its higher current density, which increased the cations migration. This higher R also led to a higher R (17 gN-NH m d).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Customizing bioelectrochemical ammonium recovery, towards application-specific effluents

  • Fernández-Verdejo, David|||0000-0002-3234-4006
  • Galeano, Mariella Belen
  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Pant, Deepak|||0000-0002-1425-9588
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Ammonium recovery from wastewater is of increasing interest due to its environmental implications and potential economic and energy benefits. In this study, a three-chamber bioelectrochemical system (BES) incorporating nickel-based gas diffusion electrodes was operated in continuous mode, achieving high ammonium recovery rates (47 g NH4+-N/m2/d) and current densities (3.6 A/m2), with low energy requirements (∼ 1.0 kWh/kg NH4+-N recovered). The established biofilms and membrane materials maintained stable performance over extended operation (>80 d). The effects of recovery solution flow rate (40, 60 and 83 mL/d) and acid type (sulfuric, phosphoric and nitric) on effluent quality were systematically evaluated. For each condition, the properties of the recovered effluent regarding pH (ranging between 1 and 10) and ammonium concentration (from 2.8 to 11.0 g NH4+-N/L) were evaluated, providing a flexible platform for generating application-specific ammonium solutions. All tested conditions delivered competitive nitrogen recovery rates (>29 g NH4+-N/m2/d), with several scenarios outperforming previous BES configurations. The recovered effluents were validated as a nitrogen source in Komagataella phaffii fermentation, achieving 3-hydroxypropionic acid concentrations 7 % higher than those obtained when using a commercial ammonium source.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Carbonic anhydrase to boost CO2 sequestration, Improving carbon capture utilization and storage (CCUS)

  • de Oliveira Maciel, Ayanne|||0000-0002-3002-2935
  • Christakopoulos, Paul|||0000-0003-0079-5950
  • Rova, Ulrika|||0000-0001-7500-2367
  • Antonopoulou, Io|||0000-0002-7754-9398
CO2 Capture Utilization and Storage (CCUS) is a fundamental strategy to mitigate climate change, and carbon sequestration, through absorption, can be one of the solutions to achieving this goal. In nature, carbonic anhydrase (CA) catalyzes the CO2 hydration to bicarbonates. Targeting the development of novel biotechnological routes which can compete with traditional CO2 absorption methods, CA utilization has presented a potential to expand as a promising catalyst for CCUS applications. Driven by this feature, the search for novel CAs as biocatalysts and the utilization of enzyme improvement techniques, such as protein engineering and immobilization methods, has resulted in suitable variants able to catalyze CO2 absorption at relevant industrial conditions. Limitations related to enzyme recovery and recyclability are still a concern in the field, affecting cost efficiency. Under different absorption approaches, CA enhances both kinetics and CO2 absorption yields, besides reduced energy consumption. However, efforts directed to process optimization and demonstrative plants are still limited. A recent topic with great potential for development is the CA utilization in accelerated weathering, where industrial residues could be re-purposed towards becoming carbon sequestrating agents. Furthermore, research of new solvents has identified potential candidates for integration with CA in CO2 capture, and through techno-economic assessments, CA can be a path to increase the competitiveness of alternative CO2 absorption systems, offering lower environmental costs. This review provides a favorable scenario combining the enzyme and CO2 capture, with possibilities in reaching an industrial-like stage in the future.
Dipòsit Digital de Documents de la UAB
Other research product Plan de Gestión de Datos (DataManagementPlan)

Vivaldi Data Management Plan

  • Sulonen, Mira|||0000-0003-4812-3360
This Data Management Plan (DMP) defines the data management policies that are followed during the execution of VIVALDI project and provides an overview of all the datasets that are collected and generated. It describes the types of data that are collected, processed or generated, how the data is handled during and after the project and the measures that are taken to ensure that the data collected or generated follows the FAIR principles of EU Horizon 2020 projects, ensuring that the data is findable, accessible, interoperable and reusable. The plan discusses the used metadata standards and identifiers, repositories for making the data available as well as quality assurance methods and reusability.
Dipòsit Digital de Documents de la UAB
Publication Estudio, informe, memoria (Report)

Vivaldi Communication Plan

  • CO2 Value Europe
The communication plan focuses on the promotion of all VIVALDI project's activities, ensuring an appropriate level of public engagement.In order to accomplish this, the communication plan:Sets the communication objectives, that are functional to reach the project's priorities.Identifies and analyses the target audience, grouping the most relevant stakeholders based on common interest and potential impact on the project.Defines and adapts the key messages to each stakeholder group.Lists the key communication tools and channels to be used to deliver the key messages to the right audience.Organises all communication activities in an implementation plan, appointing responsibilities, timeframe and KPIs.
Dipòsit Digital de Documents de la UAB
Publication Estudio, informe, memoria (Report)

Vivaldi Dissemination Plan

  • CO2 Value Europe
The Dissemination Plan focus on spreading VIVALDI results to a wide stakeholder base that is interested in VIVALDI's outcomes and are likely to use them in activities other than exploitation, including scientific diffusion and knowledge exchange.The Dissemination Plan includes the following key elements:The dissemination objectives and the expected outcomes to be disseminated.The identification and analysis of the target audience. Aspects such as knowledge and attitude towards the subject, potential barriers and their role in reaching dissemination objectives are described for each stakeholder group.The dissemination tools and channels. A detailed list of means to ensure to reach the entire target audience and convey the project's results in the most appropriate way.The implementation plan and the governance. A guide on how, when, where, to whom disseminate VIVALDI project's outcomes. The partners' responsibilities and the KPIs complete the section.
Dipòsit Digital de Documents de la UAB
Publication Estudio, informe, memoria (Report)

Vivaldi website and visual identity

  • Tottolo, Lara
The aim of the website and visual identity is to support the effective uptake of the project's outcome by the targeted stakeholders.The deliverable consists in the creation of the following communication tools and material:The visual identity, which includes the project logo and templates for presentation and reporting.The visual identity will make the project and its outcomes recognisable by the targeted stakeholders and offer the consortium effective material to present and report the work done in each WP.The project's website, which is designed following VIVALDI visual identity and in conformity with the General Data Protection Rules.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conversion of CO2 into organic acids by engineered autotrophic yeast

  • Baumschabl, Michael|||0000-0002-0676-6002
  • Ata, Özge|||0000-0001-7157-2039
  • Mitic, Bernd M.|||0000-0001-5899-3090
  • Lutz, Lisa|||0000-0002-9097-230X
  • Gassler, Thomas|||0000-0003-1873-8807
  • Troyer, Christina|||0000-0002-8960-7532
  • Hann, Stephan|||0000-0001-5045-7293
  • Mattanovich, Diethard|||0000-0002-0907-4167
The increase of CO2 emissions due to human activity is one of the preeminent reasons for the present climate crisis. In addition, considering the increasing demand for renewable resources, the upcycling of CO2 as a feedstock gains an extensive importance to establish CO2-neutral or CO2-negative industrial processes independent of agricultural resources. Here we assess whether synthetic autotrophic Komagataella phaffii (Pichia pastoris) can be used as a platform for value-added chemicals using CO2 as a feedstock by integrating the heterologous genes for lactic and itaconic acid synthesis. 13C labeling experiments proved that the resulting strains are able to produce organic acids via the assimilation of CO2 as a sole carbon source. Further engineering attempts to prevent the lactic acid consumption increased the titers to 600 mg L-1, while balancing the expression of key genes and modifying screening conditions led to 2 g L-1 itaconic acid. Bioreactor cultivations suggest that a fine-tuning on CO2 uptake and oxygen demand of the cells is essential to reach a higher productivity. We believe that through further metabolic and process engineering, the resulting engineered strain can become a promising host for the production of value-added bulk chemicals by microbial assimilation of CO2, to support sustainability of industrial bioprocesses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microbial | electrochemical CO2 reduction, To integrate or not to integrate?

  • Izadi, Paniz|||0000-0002-9427-8171
  • Harnisch, Falk|||0000-0002-0014-4640
Carbon dioxide (CO2) must turn from waste to feedstock in order to establish a circular economy. Although there is consensus that chemicals and fuels for consumer goods will be based on the carbon that was recently CO2, one can only make inferences regarding the technology platform(s) that will be needed to reach such an industrial transformation. Certainly, the current petro-based industries will not be simply replaced by one technology. Rather, a broad portfolio of platforms comprised of physical, chemical and biological technologies can be expected in order to allow development toward a true circularity of (bio)chemical synthesis. Among these technologies are platforms based on interweaving microbial and electrochemical synthesis
Dipòsit Digital de Documents de la UAB
Publication Artículo preliminar (WorkingPaper)

Preparation of nickel-coated gas diffusion electrodes for (bio)electrochemical ammonium recovery, Ni-GDE preparation for BESs

  • Universitat Autònoma de Barcelona.
The protocol for the preparation of nickel-based gas diffusion electrodes for bioelectrochemical ammonium recovery.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microbial electrosynthesis of acetate from CO2 in three-chamber cells with gas diffusion biocathode under moderate saline conditions

  • Dessì, Paolo|||0000-0002-9935-3038
  • Buenaño-Vargas, Claribel
  • Martínez-Sosa, Santiago|||0000-0003-2187-210X
  • Mills, Simon|||0000-0002-8682-3846
  • Trego, Anna
  • Ijaz, Umer Z.
  • Pant, Deepak|||0000-0002-1425-9588
  • Puig, Sebastià|||0000-0003-2995-1443
  • O'Flaherty, Vincent
  • Farràs Costa, Pau
The industrial adoption of microbial electrosynthesis (MES) is hindered by high overpotentials deriving from low electrolyte conductivity and inefficient cell designs. In this study, a mixed microbial consortium originating from an anaerobic digester operated under saline conditions (∼13 g L-1 NaCl) was adapted for acetate production from bicarbonate in galvanostatic (0.25 mA cm-2) H-type cells at 5, 10, 15, or 20 g L-1 NaCl concentration. The acetogenic communities were successfully enriched only at 5 and 10 g L-1 NaCl, revealing an inhibitory threshold of about 6 g L-1 Na+. The enriched planktonic communities were then used as inoculum for 3D printed, three-chamber cells equipped with a gas diffusion biocathode. The cells were fed with CO2 gas and operated galvanostatically (0.25 or 1.00 mA cm-2). The highest production rate of 55.4 g m-2 d-1 (0.89 g L-1 d-1), with 82.4% Coulombic efficiency, was obtained at 5 g L-1 NaCl concentration and 1 mA cm-2 applied current, achieving an average acetate production of 44.7 kg MWh-1. Scanning electron microscopy and 16S rRNA sequencing analysis confirmed the formation of a cathodic biofilm dominated by Acetobacterium sp. Finally, three 3D printed cells were hydraulically connected in series to simulate an MES stack, achieving three-fold production rates than with the single cell at 0.25 mA cm-2. This confirms that three-chamber MES cells are an efficient and scalable technology for CO2 bio-electro recycling to acetate and that moderate saline conditions (5 g L-1 NaCl) can help reduce their power demand while preserving the activity of acetogens.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Application of gas diffusion electrodes in bioeconomy: An update

  • Stöckl, Markus
  • Lange, Thomas
  • Izadi, Paniz|||0000-0002-9427-8171
  • Bolat, Sera
  • Teetz, Niklas
  • Harnisch, Falk|||0000-0002-0014-4640
  • Holtmann, Dirk|||0000-0001-5540-3550
The transition of today's fossil fuel based chemical industry toward sustainable production requires improvement of established production processes as well as development of new sustainable and bio-based synthesis routes within a circular economy. Thereby, the combination of electrochemical and biotechnological advantages in such routes represents one important keystone. For the electrochemical generation of reactants from gaseous substrates such as O2 or CO2, gas diffusion electrodes (GDE) represent the electrodes of choice since they overcome solubility-based mass transport limitations. Within this article, we illustrate the architecture, function principle and fabrication of GDE. We highlight the application of GDE for conversion of CO2 using abiotic catalysts for subsequent biosynthesis as well as the application of microbial catalysts at GDE for CO2 conversion. The reduction of oxygen at GDE is summarized for the application of oxygen depolarized cathodes in microbial fuel cells and generation of H2O2 to drive enzymatic reactions. Finally, engineering aspects such as scale-up and the modeling of GDE-based processes are described. This review presents an update on the application of GDE in bio-based production systems and emphasizes their large potential for sustainable development of new pathways in bioeconomy.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the stability of electrochemical CO2 reduction reaction to formate at indium electrodes at biocompatible conditions

  • Izadi, Paniz|||0000-0002-9427-8171
  • Kas, Aykut|||0000-0001-5920-9894
  • Haus, Philip|||0009-0004-6798-0979
  • Harnisch, Falk|||0000-0002-0014-4640
In a circular economy, carbon dioxide (CO2) has to serve as feedstock that can be utilized by electrochemical CO2 reduction reaction (eCO2RR). Using eCO2RR to C1-compounds such as formate (HCOO- ) allows producing feed for microbial syntheses that generates value-added compounds. However, eCO2RR at biocompatible conditions is currently limited to short-term operation facing a gradual performance deterioration. Here, we evaluate the possible parameters affecting the stability of performance in terms of formate production rate (rHCOO- ) and coulombic efficiency (CE) of eCO2RR at indium during 72 h batch mode operation. Formate accumulated over time affected catholyte conductivity, but statistical analysis showed this did not have an immediate influence on the performance. However, both are key factors altering the actual cathode potential over time that in turn is leading to changes in rHCOO- (maximum deviation of ± 0.03 mmol h- 1 cm- 2 at the stable performance at each condition) and CE (maximum deviation ± 40% at stable performance at each condition). These effects were more significant after reaching certain formate concentration and catholyte conductivity (ca. 70 mM and 21 mS cm- 1, respectively). These results highlight the potential obstacles needed to be considered and tackled in order to achieve stable rHCOO- and CE over a long-term eCO2RR operation. This study discusses how to overcome these obstacles from different operational perspectives.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioelectrochemical ammonium recovery from wastewater: A review

  • Galeano, Mariella Belen
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Baeza, Mireia|||0000-0002-2240-6410
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Due to the anticipated rise in demand for ammonia, the search for viable methods for its recovery has intensified in recent years, as traditional ammonia production is a high energy intensive process. Bioelectrochemical systems (BESs) offer an alternative solution for ammonia recovery since they have shown lower energy demand (in terms of kJ g- 1 N recovered) at lab-scale than other methodologies. In BESs, the bioelectrochemically generated current drives the transport of NH4 + from the wastewater to a concentration chamber through a cation exchange membrane before its subsequent recovery. This paper describes the fundamentals and opportunities for bioelectrochemical ammonia recovery (either by stripping, absorption, or precipitation) in different BES devices such as microbial fuel cells, microbial electrolysis cells, microbial desalination cells and bioelectroconcentration cells and compares the performance of all the reported experimental works so far. Moreover, the most critical challenges (low current density, nature and quantity of the carbon source, inlet ammonium concentration, use of membranes, energy yield and recovery efficiency) have been detailed and discussed in view of better understanding the current bottlenecks for its scale-up and, thus, for its prompt industrial adoption.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High Salt Electrolyte Solutions Challenge the Electrochemical CO2 Reduction Reaction to Formate at Indium and Tin Cathodes

  • Kas, Aykut|||0000-0001-5920-9894
  • Izadi, Paniz|||0000-0002-9427-8171
  • Harnisch, Falk|||0000-0002-0014-4640
Formate is a promising product of the electrochemical CO2 reduction reaction (eCO2RR) that can serve as feedstock for biological syntheses. Indium (In) has been shown as a selective electrocatalyst of eCO2RR with high coulombic efficiency (CE) for formate production at small scale at biocompatible non-halophilic that is low salt conditions. Ohmic losses and challenges on potential/current distribution arise for scaling-up, where higher salt loads are advantageous for minimizing these. Higher salt concentration within the solution or halophilic conditions also enable the use of halophilic biocatalysts. We optimized eCO2RR with halophilic media by introducing tin (Sn) as a more sustainable alternative to In. At 3 % NaCl providing a catholyte conductivity (KS of 70 mS cm-1, the maximum specific formate production rates (rformate) of 0.143±0.030 mmol cm-2 h-1 and 0.167±0.027 mmol cm-2 h-1 were achieved at In and Sn electrocatalysts, respectively. Decrease in rformate and CE, in addition to higher variation between replicates was observed with further increase in NaCl concentration above 3 % (KS >70 mS cm-1) up to 10 % (KS =127 mS cm-1). This study sets the foundation for integrated microbial synthesis by halophiles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering the synthetic β-alanine pathway in Komagataella phaffii for conversion of methanol into 3-hydroxypropionic acid

  • Àvila-Cabré, Sílvia|||0000-0001-6179-4877
  • Pérez-Trujillo, Míriam|||0000-0002-6919-7417
  • Albiol i Sala, Joan|||0000-0001-5626-429X
  • Ferrer, Pau|||0000-0002-5287-4127
Methanol is increasingly gaining attraction as renewable carbon source to produce specialty and commodity chemicals, as it can be generated from renewable sources such as carbon dioxide (CO2). In this context, native methylotrophs such as the yeast Komagataella phaffii (syn Pichia pastoris) are potentially attractive cell factories to produce a wide range of products from this highly reduced substrate. However, studies addressing the potential of this yeast to produce bulk chemicals from methanol are still scarce. 3-Hydroxypropionic acid (3-HP) is a platform chemical which can be converted into acrylic acid and other commodity chemicals and biopolymers. 3-HP can be naturally produced by several bacteria through different metabolic pathways.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Integrative electrochemical and biological catalysis for the mild and efficient utilization of renewable electricity and carbon resources

  • Liu, Licheng
  • Pant, Deepak|||0000-0002-1425-9588
The chemical catalysis and biological catalysis both play important roles in producing various fuels, chemicals, and materials conventionally. In view of renewable resources (biomass and CO2) utilization, combining both chemical and biological catalysis would create revolutionary routes that are more sustainable and efficient for the processing of these resources. Considering the electricity is usually a main form of renewable energy, electrocatalysis also plays more important role. Therefore, the integrative electrochemical and biological catalysis for the simultaneous utilization of renewable energy and resources is attracting significant attention. In this review, such integrative processes and methods are summarized, discussed in depth and two integration modes are distinguished based on the use of electroactive/non-electroactive microorganisms. The intermediates mediated consecutive synthesis from CO2 or biomass to specific chemicals is shown to play a pivotal role, such as the H2 enhanced microbial electrosynthesis (MES), CO or formate mediated longer carbon chain products synthesis. Accordingly, the synthesis efficiency was improved significantly following the collaborative design of abiotic and biological catalysts, as well as the route innovation. For example, acetate productivity of 1330 g m-2 day-1 in MES and low cost of 45 g kWh-1 for producing butanol and hexanol could be achieved, which show great potential for industrial application. The integrative electrochemical and biological catalysis can convert CO2 or biomass feedstocks to a wide product distribution from C1 to C6+, and even large molecules such as sugars, lipid, starch, etc. This article exhibits the importance of integrative electrochemical and biological catalysis for efficient utilization of renewable carbon resources, the manners to integrate two different processes and some reflections for future research.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Assessing the electrochemical CO2 reduction reaction performance requires more than reporting coulombic efficiency

  • Izadi, Paniz|||0000-0002-9427-8171
  • Song, Jia|||0000-0001-8033-4999
  • Singh, Chandani|||0000-0001-9913-0304
  • Pant, Deepak|||0000-0002-1425-9588
  • Harnisch, Falk|||0000-0002-0014-4640
Reporting coulombic efficiency (CE) is the common way to assess the performance of electrochemical carbon dioxide (CO2) reduction reaction (eCO2RR) in literature, whereas its carbon conversion efficiency (CCE) is frequently neglected. Herein, the importance of reporting both efficiencies when evaluating the eCO2RR is discussed, using Sn-based gas diffusion electrodes (GDEs) as model electrodes. It is shown that can vary remarkably at a constant with minor perational changes. Over 120 min experiments with operational conditions being representative of numerous previous studies, the is increased from ≈20% to 41% (being only 9% below the theoretical maximum). This was achieved by simply Adjusting the inlet CO2 flow rate from ≈35 to 16 mL min-1, while was identical at both CO2 flow rates (≈85%, 7%, and 4% for production of formate/formic acid, CO, and H2, respectively at both conditions). Thus, it is advocated that reporting of both efficiencies, for electrons and carbon, is required for meaningfully assessing the performance of an eCO2RR system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Continuous high-purity bioelectrochemical nitrogen recovery from high N-loaded wastewaters

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Microbial electrolysis cells (MEC) have been identified as an energy efficient system for ammonium recovery from wastewater. However, high ammonium concentrations at the anode can have inhibitory effects. This work aims to determine the effects on current generation performance and active ammonia nitrogen recovery in wastewater containing 0.5 to 2.5 g N-NH4+/L. The study also evaluates the effect of two cathode materials, stainless steel (SS-MEC) and nickel foam (NF-MEC). When the concentration of ammonium in the feed was increased from 0.5 to 1.5 g N-NH4+/L the maximum current density increased from 3.2 to 3.9 A/m2, but a further increase to 2.5 g N-NH4+/L inhibited the biofilm activity, decreasing the current density to 0.5 A/m2. The maximum ammonium removal and recovery efficiencies were 71 % and 33 % at 0.5 g N-NH4+/L. The SS-MEC exhibited more energy efficient ammonium recovery compared to the NF-MEC, requiring 3.6 kWh/kgN,recovered at 0.5 gN-NH4+/L. The highest ammonium recovery rate of 33 gN/m2/d (1.5 gN-NH4+/L) was obtained with an energy consumption of 4.5 kWh/kgN,recovered. Conversely, a lower recovery rate (10 gN/m2/d for 2.5 gN-NH4+/L) resulted in reduced energy consumption at 2.1 kWh/kgN,recovered. This highlights the inherent trade-off between energy consumption and efficient ammonium recovery in the process.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Carbon efficient production of chemicals with yeasts

  • Vásquez Castro, Evelyn
  • Memari, Golnaz
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Microbial metabolism offers a wide variety of opportunities to produce chemicals from renewable resources. Employing such processes of industrial biotechnology provides valuable means to fight climate change by replacing fossil feedstocks by renewable substrate to reduce or even revert carbon emission. Several yeast species are well suited chassis organisms for this purpose, illustrated by the fact that the still largest microbial production of a chemical, namely bioethanol is based on yeast. Although production of ethanol and some other chemicals is highly efficient, this is not the case for many desired bulk chemicals. One reason for low efficiency is carbon loss, which decreases the product yield and increases the share of total production costs that is taken by substrate costs. Here we discuss the causes for carbon loss in metabolic processes, approaches to avoid carbon loss, as well as opportunities to incorporate carbon from CO2, based on the electron balance of pathways. These aspects of carbon efficiency are illustrated for the production of succinic acid from a diversity of substrates using different pathways.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A native phosphoglycolate salvage pathway of the synthetic autotrophic yeast Komagataella phaffii

  • Baumschabl, Michael|||0000-0002-0676-6002
  • Mitic, Bernd M.|||0000-0001-5899-3090
  • Troyer, Christina|||0000-0002-8960-7532
  • Hann, Stephan|||0000-0001-5045-7293
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Synthetic autotrophs can serve as chassis strains for bioproduction from CO2 as a feedstock to take measures against the climate crisis. Integration of the Calvin-Benson-Bassham (CBB) cycle into the methylotrophic yeast Komagataella phaffii (Pichia pastoris) enabled it to use CO2 as the sole carbon source. The key enzyme in this cycle is ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) catalyzing the carboxylation step. However,this enzyme is error prone to perform an oxygenation reaction leading to the production of toxic 2-phosphoglycolate. Native autotrophs have evolved different recycling pathways for 2-phosphoglycolate. However,for synthetic autotrophs, no information is available for the existence of such pathways. Deletion of CYB2 in the autotrophic K. phaffii strain led to the accumulation of glycolate, an intermediate in hosphoglycolate salvage pathways, suggesting that such a pathway is enabled by native K. phaffii enzymes. 13C tracer analysis with labeled glycolate indicated that the yeast pathway recycling phosphoglycolate is similar to the plant salvage pathway. This orthogonal yeast pathway may serve as a sensor for RuBisCO oxygenation, and as an engineering target to boost autotrophic growth rates in K. phaffii.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fermenting the future - on the benefits of a bioart collaboration

  • Mattanovich, Diethard|||0000-0002-0907-4167
  • Altvater, Martin|||0000-0002-8001-567X
  • Ata, Özge|||0000-0001-7157-2039
  • Bachleitner, Simone|||0000-0002-0048-5701
In this article we explore the intersection of science and art through a collaboration between us scientists and the bioartists Anna Dimitriu and Alex May, focusing on the interface of yeast biotechnology and art. The collaboration, originally initiated in 2018, resulted in three major artworks: CULTURE, depicting the evolution of yeast and human societies; FERMENTING FUTURES, illustrating a synthetic autotrophic yeast and its link to lactic acid production; and WOOD SPIRIT-AMBER ACID, inspired by the VIVALDI project targeting CO2 reduction to methanol. We emphasize the reciprocal nature of the collaboration, detailing the scientific insights gained and the impact of artistic perspectives on us as researchers. We also highlight the historical connection between art and science, particularly in the Renaissance periods, and underscore the educational value of integrating art into science not only to support public engagement and science dissemination, but also to widen our own perceptions in our research.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Single carbon metabolism - A new paradigm for microbial bioprocesses?

  • Baumschabl, Michael|||0000-0002-0676-6002
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Increasing atmospheric carbon dioxide levels, a reduction of arable land area and the dependence of first and second generation biotechnology feedstocks on agricultural products, call for alternative, sustainable feedstock sources for industrial applications. The direct use of CO2 or conversion of CO2 into other single carbon (C1) sources have great potential as they might help to reduce carbon emissions and do not compete with agricultural land use. Here we discuss the microbial use of C1 carbon sources, their potential applications in biotechnology, and challenges towards sustainable C1-based industrial biotechnology processes. We focus on methanol, formic acid, methane, syngas, and CO2 as feedstocks for bioprocesses, their assimilation pathways, current and emerging applications, and limitations of their application. This mini-review is intended as a first introduction for researchers who are new to the field of C1 biotechnology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The potential of CO2-based production cycles in biotechnology to fight the climate crisis

  • Bachleitner, Simone|||0000-0002-0048-5701
  • Ata, Özge|||0000-0001-7157-2039
  • Mattanovich, Diethard|||0000-0002-0907-4167
Rising CO2 emissions have pushed scientists to develop new technologies for a more sustainable bio-based economy. Microbial conversion of CO2 and CO2-derived carbon substrates into valuable compounds can contribute to carbon neutrality and sustainability. Here, we discuss the potential of C1 carbon sources as raw materials to produce energy, materials, and food and feed using microbial cell factories. We provide an overview of potential microbes, natural and synthetic C1 utilization pathways, and compare their metabolic driving forces. Finally, we sketch a future in which C1 substrates replace traditional feedstocks and we evaluate the costs associated with such an endeavor.