Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Leveraging side-stream sludge fermentation for phosphorus recovery in wastewater treatment systems

  • Cheng, Mengqi
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
This study proposes the integration of a new P-recovery strategy through the use of a side stream enhanced biological P removal (S2EBPR) process. To evaluate this alternative, a 150 L pilot-scale anaerobic/anoxic/aerobic (A2O) plant was operated with a side-incorporated reactor (10 or 23 L) to work as an anaerobic side stream sludge fermenter (SSSF). The P removal performance and possible P-recovery under different hydraulic residence time in the SSSF were evaluated. The integration of the SSSF in the A2O configuration provided an excellent 98 % P-removal and allowed to create in the SSSF a stream with a very high soluble phosphate concentration (up to 196.5 ± 10.9 mgP/L). The supernatant of the wasted activated sludge (WAS) discharged from the SSSF contained as soluble phosphate up to 40 % of the total P input to the plant.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluation of single chamber electrochemical reduction of CO2 to formate for application under biocompatible conditions

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Haus, Philip
  • Izadi, Paniz|||0000-0002-9427-8171
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Harnisch, Falk|||0000-0002-0014-4640
  • Guisasola, Albert|||0000-0002-3012-7964
The electrochemical CO2 reduction reaction (eCO2RR) facilitates high rates and yields for the selective production of formate, a quintessential C1-compound that can serve as a valuable carbon and energy source for biosynthesis. The use of double-chamber (DC) electrochemical cells with membranes is deemed essential to avoid mixing of electrochemical products (i.e. anodic oxygen and cathodic formate) and thus cross-reactions that lower yields, Faradaic efficiency (FE) and effective rate. However, single-chamber (SC) setups for eCO2RR can be more suitable to combine with bioprocesses. This work comprehensively evaluates, using different experimental set-ups, the conditions under which SC operation can obtain results comparable to DC systems. At a 50 mL scale, under biocompatible conditions, formate production in the SC setup achieved a 14 % reduction in the production rate (146 mg L-1 h-1 for SC and 170 mg L-1 h-1 for DC) and a 15 % decrease in FE (72.2 % in SC and 84.7 % in DC). The highest formate concentration produced in 24 h SC experiments was 1.8 g·L-1 with FE of 41 %, a concentration appropriate for fermentation processes. The SC operation of eCO2RR to formate without a membrane could reduce energy losses and capital costs, although at the cost of an expected reduction in rate and FE.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochemical and bioelectrochemical ammonium recovery from N-loaded streams using a hydrophobic membrane

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Galeano, Mariella Belen
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Baeza, Mireia|||0000-0002-2240-6410
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Bioelectrochemical systems enable the recovery of ammonium from wastewater with low energy requirements and as a concentrated nitrogen-rich stream. This work aims to thoroughly investigate different cathodic electrode configurations and to optimize the operational conditions for active ammonium recovery from synthetic wastewater as concentrated ammonium sulphate. Different applied current intensities (50 mA, corresponding to 5 A m, and 75 mA, corresponding to 7.5 A m) and initial ammonium concentrations (between 0.3 and 3 g L N-NH ) were tested in an abiotic electrochemical system to understand the upper threshold of the used three-chamber configuration with hydrophobic membrane in terms of ammonium recovery rate (R). With an external current of 75 mA, the highest value was 55 gN-NH m d when removing 97 % from an initial ammonium concentration of 3 g L. Bioelectrochemical ammonium removal/recovery was evaluated under different applied potentials (0.8, 1.0, 1.2, and 1.4 V) using two configurations: a Nickel-based gas diffusion electrode (GDE) and a configuration with the cathode (stainless steel or nickel foam) physically separated from the hydrophobic membrane. The highest removal rate (R) (21 gN-NH m d) was exhibited for stainless steel cathode at 1.4 V mainly due to its higher current density, which increased the cations migration. This higher R also led to a higher R (17 gN-NH m d).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Scaling up microbial electrolysis cells (MECs) for hydrogen production, Design, construction and operation of a 1 m3 pilot plant in an urban wastewater treatment plant

  • Guerrero-Sodric, Oscar|||0000-0002-4022-6325
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Microbial electrolysis cells (MECs) are considered a breakthrough technology in the water-energy nexus frame due to the good results obtained at lab-scale conditions: organic matter degradation with low sludge production and energy recovery as hydrogen. However, the scaling-up of these systems has found significant hurdles and the lab-scale performance has not been achieved at a higher scale. This study comprehensively details the design, construction, and operation of a 1 m MEC pilot plant integrated into an urban wastewater treatment plant (WWTP) and fed with primary effluent. The experimental trials conducted showcased the MEC performance under varying operational conditions, achieving a maximum organic matter removal efficiency of 51 % and continuous hydrogen production at a maximum rate of 8.59 L m d (0.094 m m d) with synthetic wastewater and 7.29 L m d (0.042 m m d at full capacity, 15 cassettes) with real urban primary effluent. These results are comparable to those obtained in pilot MEC at smaller scales (~100 L), demonstrating a good scalability of the proposed prototype. A techno-economic assessment was performed to evaluate the commercial potential of the pilot MEC, considering factors such as revenue from hydrogen production, electricity consumption costs and capital expenses. The outcomes of this study represent a significant advancement in the scale-up of MECs, offering valuable insights into the challenges and opportunities associated with real-world implementation. Further improvements should focus on minimizing material costs, hydrogen leakages and voltage losses to enhance scalability, as well as exploring the applicability of MECs in niches other than urban WWTP.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploring the effects of substrate composition on acidogenic fermentation of carbohydrate-protein mixtures

  • Vazquez Fernandez, Ana|||0000-0002-9690-229X
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Carrera, Julian|||0000-0002-2599-2312
The organic composition of the substrate is a pivotal factor that significantly influences the performance of acidogenic fermentation processes. Despite its importance, the impact of this parameter on acidification yields, effluent composition, and bacterial communities remains inadequately understood. This study presents a comprehensive and systematic analysis of acidogenic fermentation experiments, where the sole variable was the substrate's organic composition. Utilizing a sequencing batch reactor under consistent conditions (volumetric and specific organic loading rates, pH, and temperature), simulated wastewater substrates with varying proportions of soluble carbohydrates (C) and proteins (P): 100%P, 75%P/25%C, 50%P/50%C, 25%P/75%C, and 100%C was investigated. The results reveal that substrates comprising mixtures of carbohydrates and proteins achieve higher degrees of acidification, carboxylic acid production yields, and organic matter in the form of acids in the effluent compared to substrates solely composed of carbohydrates or proteins. Notably, an increased protein proportion in the influent correlates with reduced selectivity towards specific acids. It was possible to obtain linear correlations between the protein content in the substrate and the effluent composition of butyric, isobutyric, and isovaleric acids. Furthermore, the presence of different bacterial genera in the reactor were successfully linked to the effluent components corresponding to the various substrate compositions tested. This work sheds light about the critical role of substrate organic composition in acidogenic fermentation performance, providing valuable insights for optimizing acidogenic fermentation under controlled operational parameters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sustainable valorization of slaughterhouse solid waste, A review of characterization, conditioning, hydrolysis and biotransformation strategies

  • Jiménez-Urpi, Montserrat
  • Carbonell Chacón, Sergi
  • Jubany, Irene|||0000-0001-6112-4558
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Baquerizo, Guillermo|||0000-0001-7404-4995
The meat processing industry generates significant quantities of waste, including solid animal by-products (ABPs) and slaughterhouse wastewater (SWW). For instance, based on global meat production in 2020 (approximately 250 million tons), slaughterhouse activities can generate up to 2250 million m³ of SWW and around 375 million tons of ABPs annually. While SWW is typically treated on-site using conventional technologies, ABPs are managed in external facilities employing traditional methods such as incineration, landfilling or rendering. These practices not only intensify environmental and health issues but also hinder the potential of valorization of ABPs into high-value products. Recent advancements in biological processes have explored the transformation of ABPs into valuable products, such as biogas through anaerobic digestion (AD), predominantly at lab-scale. However, the hydrolysis of ABPs remains a critical bottleneck due to their complex composition and high organic content, requiring extended processing times and large reactor volumes, which limit industrial-scale applications. This review evaluates current and emerging practices for the treatment and valorization of slaughterhouse waste, with a focus on transforming these residues into high-value products, promoting sustainability in the meat industry. This study identifies and characterizes ABP fractions suitable for biological processes and emphasizes the role of waste conditioning and hydrolytic strategies aimed at enhancing the efficiency of biological based processes. Key factors influencing hydrolysis performance are discussed alongside the integration of pretreated waste in industrial AD process. The review provides a critical analysis of existing methods, highlighting their gaps, and identifies opportunities to optimize biological waste conversion for sustainable and high value bioproduct generation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nitrous Oxide Production and Hydroxylamine Accumulation in a Partial Nitritation Sequencing Batch Reactor, Comparison of Different Operational Strategies

  • Olmo i Cerdà, Lluc|||0000-0001-6001-4832
  • Carrera, Julian|||0000-0002-2599-2312
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
Sequencing batch reactors (SBRs) performing partial nitritation (PN) for treating high-strength ammonium wastewater are known to exhibit elevated levels of nitrous oxide (NO) emissions. This study investigated NO production and hydroxylamine accumulation in a PN-SBR operated using three distinct strategies. The NO emission factor (EF) and net production rate (N2OR) were determined under stable conditions for (i) single feeding with continuous aeration and one microaerobic stage before settling (strategy I), yielding EF = 4.4% and N2OR = 14 mg N g VSS d; (ii) single feeding with multiple microaerobic stages distributed throughout the cycle (strategy II), yielding EF = 13.5% and N2OR = 85 mg N g VSS d; and (iii) step feeding with one single microaerobic stage before settling (strategy III), yielding EF = 10% and N2OR = 45 mg N g VSS d. The distribution of microaerobic stages throughout the cycle (strategy II) promoted the highest hydroxylamine accumulation (0.18 mg N L) during the aerated stage, whereas strategy I showed the lowest accumulation (0.01 mg N L). A strong positive correlation (R ≥ 0.9) was observed among the specific ammonium oxidation rate (AOR), specific N2OR, and bulk liquid hydroxylamine concentration during the aerated stages.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Customizing bioelectrochemical ammonium recovery, towards application-specific effluents

  • Fernández-Verdejo, David|||0000-0002-3234-4006
  • Galeano, Mariella Belen
  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Pant, Deepak|||0000-0002-1425-9588
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Ammonium recovery from wastewater is of increasing interest due to its environmental implications and potential economic and energy benefits. In this study, a three-chamber bioelectrochemical system (BES) incorporating nickel-based gas diffusion electrodes was operated in continuous mode, achieving high ammonium recovery rates (47 g NH4+-N/m2/d) and current densities (3.6 A/m2), with low energy requirements (∼ 1.0 kWh/kg NH4+-N recovered). The established biofilms and membrane materials maintained stable performance over extended operation (>80 d). The effects of recovery solution flow rate (40, 60 and 83 mL/d) and acid type (sulfuric, phosphoric and nitric) on effluent quality were systematically evaluated. For each condition, the properties of the recovered effluent regarding pH (ranging between 1 and 10) and ammonium concentration (from 2.8 to 11.0 g NH4+-N/L) were evaluated, providing a flexible platform for generating application-specific ammonium solutions. All tested conditions delivered competitive nitrogen recovery rates (>29 g NH4+-N/m2/d), with several scenarios outperforming previous BES configurations. The recovered effluents were validated as a nitrogen source in Komagataella phaffii fermentation, achieving 3-hydroxypropionic acid concentrations 7 % higher than those obtained when using a commercial ammonium source.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

3D-printed sensing platforms and their feasibility for environmental monitoring

  • Pan, Mingyue|||0009-0000-0074-7006
  • Paré Estalella, Franc|||0000-0002-0710-3681
  • Baeza, Mireia|||0000-0002-2240-6410
After a brief introduction of the state of the art in environmental monitoring and 3D-printing technology, this review presents a general summary report about the most relevant electrochemical sensors fabricated by 3D-printing during the past five years. Being mainly applied in environmental monitoring, food industry and healthcare and pharmaceutical industry, the printing design, choice of electrode modification and analytical performance of those sensors are compared and discussed. Furthermore, to gain a better understanding about the achievements and limitations of the electrochemical sensors designed for environmental monitoring, a more detailed analysis is carried out by mainly focusing on water pollution detection and quality monitoring. Finally, to take better advantage of 3D-printing, the possible improvements and the future of further applying this technique into the environmental monitoring section is also discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Computational Fluid Dynamics Reveals Mass Transfer Limitations in a Pilot-Scale Microbial Electrolysis Cell

  • Guerrero-Sodric, Oscar|||0000-0002-4022-6325
  • Navarro-Quispe, Rholand Jordi
  • Cortada-Garcia, Martí
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
The scalability of microbial electrochemical technologies (METs), particularly microbial electrolysis cells (MECs), is constrained by hydrodynamic and mass transfer limitations that hinder efficient resource recovery from wastewater. This study presents a comprehensive computational fluid dynamics (CFD) model of a pilot-scale MEC (1 m), representing the largest MEC modeled to date and integrating fluid dynamics with bioelectrochemical substrate consumption. The model simulates the spatial distribution of the anolyte under various operational conditions to identify flow-induced limitations in substrate transport to anodic biofilms. Dead zones and preferential flow paths caused significant inefficiencies, resulting in poor acetate removal under laminar flow. When evaluating the influence of HRT, reaction kinetics, and diffusivity on MEC performance, simulations further underscore that reactor performance is predominantly governed by external mass transfer rather than intrinsic reaction kinetics. To mitigate transport limitations without reducing the volumetric treatment capacity, a recirculation strategy was implemented, enhancing acetate removal efficiency from 16% to 48%. Model predictions agreed well with experimental data from similar pilot-scale MECs, supporting the validity of the approach. This work is intended as a reduced-order framework to diagnose hydrodynamic and external mass transfer limitations in large-scale cassette-type MECs, offering practical insights for improving reactor design and operation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Benefits and drawbacks of integrating a side-stream sludge fermenter into an A2O system under limited COD conditions

  • Zhang, Congcong|||0000-0003-3693-4705
  • Guisasola, Albert|||0000-0002-3012-7964
  • Oehmen, Adrian|||0000-0001-9981-0983
  • Baeza, Juan Antonio|||0000-0003-1290-1669
The implementation of a side-stream sludge fermenter (SSSF) has been identified as a possible solution to improve the performance of an anaerobic/anoxic/aerobic (A2O) configuration when treating low COD wastewater. This study systematically evaluated the effects of incorporating a SSSF into an A2O configuration (side-stream enhanced biological phosphorus removal, S2EBPR) for P/N/COD removal under a limited influent COD (CODINF) condition. The performance of the S2EBPR (with the SSSF receiving 6% of the recycled activated sludge and operating with a hydraulic retention time (HRT) of 2.4 d) and A2O were compared under the same limited CODINF (350 mg/L) condition. S2EBPR improved the amount of P removed (26.6%) under a low influent COD/P of only 26.3 compared with A2O of 32.6, and enhanced denitrification (11%) without compromising full ammonium and COD removal. However, the PLOAD to the plant increased due to the P-release in SSSF, resulting in higher effluent P concentration. The methane and energy recovery indexes were around 45% lower than those of A2O. Sequencing analysis revealed a high abundance of PAO in accordance to its higher P removal. This study represents a comprehensive evaluation of the S2EBPR configuration and provides an assessment of its suitability.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Exploring key operational factors for improving hydrogen production in a pilot-scale microbial electrolysis cell treating urban wastewater

  • Guerrero-Sodric, Oscar|||0000-0002-4022-6325
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Bioelectrochemical systems (BES) are becoming popular technologies with a plethora of applications in the environmental field. However, research on the scale-up of these systems is scarce. To understand the limiting factors of hydrogen production in microbial electrolysis cell (MEC) at pilot-scale, a 135 L MEC was operated for six months under a wide range of operational conditions: applied potential [0.8-1.1 V], hydraulic residence time [1.1-3.9 d], and temperature [18-30 °C], using three types of wastewater; synthetic (900 mg CODs L-1), raw urban wastewater (200 mg CODs L-1) and urban wastewater amended with acetate (1000 mg CODs L-1). The synthetic wastewater yielded the maximum current density (1.23 A m-2) and hydrogen production (0.1 m3 m-3 d-1) ever reported in a pilot scale MEC, with a cathodic recovery of 70% and a coulombic efficiency of 27%. In contrast, the use of low COD urban wastewater limited the plant performance. Interestingly, it was possible to improve hydrogen production by reducing the hydraulic residence time, finding the optimal applied potential or increasing the temperature. Further, the pilot plant demonstrated a robust capacity to remove the organic matter present in the wastewater under different conditions, with removal efficiencies above 70%. This study shows improved results compared to similar MEC pilot plants treating domestic wastewater in terms of hydrogen production and treatment efficiency and also compares its performance against conventional activated sludge processes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Systematic screening of carbon-based anode materials for bioelectrochemical systems

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Baeza, Mireia|||0000-0002-2240-6410
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Gabriel, David|||0000-0002-7713-4192
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
BACKGROUND: The anode material of bioelectrochemical systems (BES) is crucial because its characteristics directly affect electron transfer from the bacteria to the anode. To assess its usefulness, each material must undergo evaluation under relevant operating conditions, as well as a complete electrochemical characterization. RESULTS: Five carbonaceous materials - carbon brush (CB), carbon granules (CG), thicker carbon felt (CF1), high-conductivity carbon felt (CF2), and high-active-area carbon felt (CF3) - anodes were tested in this work. The current generation with each anode material was studied, operating as a microbial fuel cell (MFC) and microbial electrolysis cell (MEC). Two MFC inoculation strategies were tested: (i) fixed 10 Ω external resistance (ER) and (ii) poised anode potential (PA) of 200 mV versus Ag/AgCl. Once reproducible cycles were obtained in MFC operation, CB yielded the highest maximum current density, amounting to 15.9 A m-2. A slightly reduced start-up time was observed for each anode with PA than ER. When the anodes were transferred to MEC operation, the maximum hydrogen production rate of 1.04 m3 H2 m-3 d-1 was obtained for CB. CONCLUSION: This study helps in selecting anode material for BES, allowing a shortening of the start-up time and improving its performance using different inoculation strategies and anode materials. Among all the anode materials employed in this study, CB and CF3 electrodes presented the best overall performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioelectrochemical ammonium recovery from wastewater: A review

  • Galeano, Mariella Belen
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Baeza, Mireia|||0000-0002-2240-6410
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Due to the anticipated rise in demand for ammonia, the search for viable methods for its recovery has intensified in recent years, as traditional ammonia production is a high energy intensive process. Bioelectrochemical systems (BESs) offer an alternative solution for ammonia recovery since they have shown lower energy demand (in terms of kJ g- 1 N recovered) at lab-scale than other methodologies. In BESs, the bioelectrochemically generated current drives the transport of NH4 + from the wastewater to a concentration chamber through a cation exchange membrane before its subsequent recovery. This paper describes the fundamentals and opportunities for bioelectrochemical ammonia recovery (either by stripping, absorption, or precipitation) in different BES devices such as microbial fuel cells, microbial electrolysis cells, microbial desalination cells and bioelectroconcentration cells and compares the performance of all the reported experimental works so far. Moreover, the most critical challenges (low current density, nature and quantity of the carbon source, inlet ammonium concentration, use of membranes, energy yield and recovery efficiency) have been detailed and discussed in view of better understanding the current bottlenecks for its scale-up and, thus, for its prompt industrial adoption.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Evaluating the opportunities for mainstream P-recovery in anaerobic/anoxic/aerobic systems

  • Cheng, Mengqi
  • Zhang, Congcong|||0000-0003-3693-4705
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Mainstream P-recovery can help wastewater treatment plants (WWTPs) to effectively maintain good enhanced biological phosphorus removal (EBPR) while helping to recover P. In this study, a pilot-scale anaerobic-anoxic-aerobic (AO) process was operated for simultaneous COD/N/P removal and P-recovery under different operational conditions. The operation with conventional extraction of waste activated sludge (WAS) from the aerobic reactor was compared to the mainstream P-recovery strategy of WAS extraction from the anaerobic reactor. Successful nutrient removal was obtained for both scenarios, but the anaerobic WAS extraction results improved polyphosphate accumulating organisms (PAOs) activity by increasing almost 27 % P concentration in the anaerobic reactor. WAS fermentation was also evaluated, showing that anaerobic WAS required only 3 days to reach a high P concentration, while the aerobic WAS fermentation required up to 7 days. The fermentation process increased the amount of soluble P available for precipitation from 24.4 % up to 51.6 % in the fermented anaerobic WAS scenario. Results obtained by precipitation modelling of these streams showed the limitations for struvite precipitation due to Ca interference and Mg and NH as limiting species. The optimum precipitation scenario showed that P-recovery could reach up to 51 % of the input P, being 90 % struvite.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Continuous high-purity bioelectrochemical nitrogen recovery from high N-loaded wastewaters

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Microbial electrolysis cells (MEC) have been identified as an energy efficient system for ammonium recovery from wastewater. However, high ammonium concentrations at the anode can have inhibitory effects. This work aims to determine the effects on current generation performance and active ammonia nitrogen recovery in wastewater containing 0.5 to 2.5 g N-NH4+/L. The study also evaluates the effect of two cathode materials, stainless steel (SS-MEC) and nickel foam (NF-MEC). When the concentration of ammonium in the feed was increased from 0.5 to 1.5 g N-NH4+/L the maximum current density increased from 3.2 to 3.9 A/m2, but a further increase to 2.5 g N-NH4+/L inhibited the biofilm activity, decreasing the current density to 0.5 A/m2. The maximum ammonium removal and recovery efficiencies were 71 % and 33 % at 0.5 g N-NH4+/L. The SS-MEC exhibited more energy efficient ammonium recovery compared to the NF-MEC, requiring 3.6 kWh/kgN,recovered at 0.5 gN-NH4+/L. The highest ammonium recovery rate of 33 gN/m2/d (1.5 gN-NH4+/L) was obtained with an energy consumption of 4.5 kWh/kgN,recovered. Conversely, a lower recovery rate (10 gN/m2/d for 2.5 gN-NH4+/L) resulted in reduced energy consumption at 2.1 kWh/kgN,recovered. This highlights the inherent trade-off between energy consumption and efficient ammonium recovery in the process.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing bioelectrochemical hydrogen production from industrial wastewater using Ni-foam cathodes in a microbial electrolysis cell pilot plant

  • Guerrero-Sodric, Oscar|||0000-0002-4022-6325
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
Microbial electrolysis cells (MECs) have garnered significant attention as a promising solution for industrial wastewater treatment, enabling the simultaneous degradation of organic compounds and biohydrogen production. Developing efficient and cost-effective cathodes to drive the hydrogen evolution reaction is central to the success of MECs as a sustainable technology. While numerous lab-scale experiments have been conducted to investigate different cathode materials, the transition to pilot-scale applications remains limited, leaving the actual performance of these scaled-up cathodes largely unknown. In this study, nickel-foam and stainless-steel wool cathodes were employed as catalysts to critically assess hydrogen production in a 150 L MEC pilot plant treating sugar-based industrial wastewater. Continuous hydrogen production was achieved in the reactor for more than 80 days, with a maximum COD removal efficiency of 40 %. Nickel-foam cathodes significantly enhanced hydrogen production and energy efficiency at non-limiting substrate concentration, yielding the maximum hydrogen production ever reported at pilot-scale (19.07 ± 0.46 L H2 m-2 d-1 and 0.21 ± 0.01 m3 m-3 d-1). This is a 3.0-fold improve in hydrogen production compared to the previous stainless-steel wool cathode. On the other hand, the higher price of Ni-foam compared to stainless-steel should also be considered, which may constrain its use in real applications. By carefully analysing the energy balance of the system, this study demonstrates that MECs have the potential to be net energy producers, in addition to effectively oxidize organic matter in wastewater. While higher applied potentials led to increased energy requirements, they also resulted in enhanced hydrogen production. For our system, a conservative applied potential range from 0.9 to 1.0 V was found to be optimal. Finally, the microbial community established on the anode was found to be a syntrophic consortium of exoelectrogenic and fermentative bacteria, predominantly Geobacter and Bacteroides, which appeared to be well-suited to transform complex organic matter into hydrogen.