Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Electrochemical CO2 Reduction, Commercial Innovations and Prospects

  • Varhade, Swapnil|||0000-0003-4202-9883
  • Guruji, Avni|||0009-0000-6059-8401
  • Singh, Chandani|||0000-0001-9913-0304
  • Cicero, Giancarlo|||0000-0002-2920-9882
  • García-Melchor, Max|||0000-0003-1348-4692
  • Helsen, Joost|||0000-0001-9017-7210
  • Pant, Deepak|||0000-0002-1425-9588
Sustainability is an imperative requirement in this era, with electrocatalytic power into fuels technologies emerging as a significant route toward sustainable chemistry. One of the focus areas within the chemical industry is capture of carbon dioxide (CO2) and its electrochemical reduction (eCO2RR) into economically viable commodities through the utilization of renewable sources. Despite some specific eCO2RR technologies being poised for market introduction, the development of a comprehensive technology for eCO2RR remains a challenge. While certain technologies targeting specific eCO2RR products are on the verge of deployment, substantial efforts are still necessary to transition and establish presence in the market over conventional technologies. This review highlights recent technological advancements, fundamental studies, and the persisting challenges from an industrial perspective. We take a deep dive into the research methodologies, strategies, challenges, and advancements in the development of applications for eCO2RR. Specifically, three eCO2RR products - CO, HCOOH, and C2H4 - as promising candidates for implementation are elaborated based on techno-economic considerations. Additionally, the review discusses the industrial blueprint for these products, aiming to streamline their path toward commercialization. The intent is to present the status of eCO2RR, offering insights into its potential transformation from a mere laboratory curiosity to a feasible technology for industrial chemical synthesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of Defects on the Particle Size-Capacitance Relationship of Zn-Co Mixed Metal Oxide Supported on Heteroatom-Doped Graphenes as Supercapacitors

  • Hu, Hu Jiajun
  • Peng, Yong
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Supercapacitors are considered among the most promising electrical energy storage devices, there being a need to achieve the highest possible energy storage density. Herein small mixed Zn-Co metal oxide nanoparticles are grown on doped graphene (O-, N- and, B-doped graphenes). The electrochemical properties of the resulting mixed Zn-Co metal oxide nanoparticles (4 nm) grown on B-doped graphene exhibit an outstanding specific capacitance of 2568 F g-1 at 2 A g-1 , ranking this B-doped graphene composite among the best performing electrodes. The energy storage capacity is also remarkable even at large current densities (i.e., 640 F g-1 at 40 A g-1 ). In contrast, larger nanoparticles are obtained using N- and O-doped graphenes as support, the resulting materials exhibiting lower performance. Besides energy storage, the Zn-Co oxide on B-doped graphene shows notable electrochemical performance and stability obtaining a maximum energy density of 77.6 W h Kg-1 at 850 W Kg-1 , a power density of 8500 W Kg-1 at 28.3 W h Kg-1 , and a capacitance retention higher than 85% after 5000 cycles. The smaller nanoparticle size and improved electrochemical performance on B-doped graphene-based devices are attributed to the higher defect density and nature of the dopant element on graphene., The authors gratefully acknowledge the financial support by the "MCIN/AEI/10.13039/501100011033/, the FEDER funds (PDI2021-126071-OB-C21)", the Generalitat Valenciana (Prometeo 2021-038), and the European Union project H2020-LC-CS3-2020-RES-RIA "Eco2Fuel"(grant agreement 101006701). J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synergistic effect of Cu and Fe small nanoparticles supported on porous N-doped graphitic framework for selective electrochemical CO2 reduction at low overpotential

  • Du, Xiangze
  • Peng, Lu
  • Hu, Jiajun
  • Peng, Yong
  • Li, Dan
  • Hu, Changwei
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Electrochemical CO2 reduction is an appealing approach to diminish CO2 emissions, while obtaining valuable chemicals and fuels from renewable electricity. However, efficient electrocatalysts exhibiting high selectivity and low operating potentials are still needed. Herein it is reported that Cu and Fe nanoparticles supported on porous N-doped graphitic carbon matrix are efficient and selective electrocatalysts for CO2 reduction to CO at low overpotentials. XRD and Raman spectroscopy confirmed independent Cu and Fe metals as the main phases. HRSEM and HRTEM images show the coral-like morphology of the porous N-doped graphitic carbon matrix supporting Cu and Fe metal nanoparticles (about 10 wt%) homogeneously distributed with an average size of 1.5 nm and narrow size distribution. At the optimum Fe/Cu ratio of 2, this material present high activity for CO2 reduction to CO at -0.3 V vs. RHE with a faradaic efficiency of 96%. Moreover, at -0.5 V vs. RHE this electrocatalyst produces 27.8 mmol of CO g(cat)(-1) h(-1), the production rate being stable for 17 h. A synergy between Cu and Fe nanoparticles due to their close proximity in comparison with independent Cu or Fe electrocatalysts was observed., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1) and Generalitat Valenciana (Prometeo 2021/038) and European Union (ECO2Fuel) is gratefully acknowledged. X. D. thanks the Chinese Scholarship Council for financial support to his stay at Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-current water electrolysis performance of metal phosphides grafted on porous 3D N-doped graphene prepared without using phosphine

  • Hu, Hu Jiajun
  • Peng, Lu
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Development of efficient and stable electrodes for hydrogen and oxygen evolution from water constituted of abundant elements and prepared by sustainable and scalable procedures is of considerable importance for producing green hydrogen from renewable electricity. Herein, a method for the preparation of Ni2P, Fe2P, and FeP supported on N-doped graphene (NiP/NG and FeP/NG) is reported. The procedure uses metal salts, phosphorous oxide, and chitosan as precursors of metal phosphide and N-doped graphene, avoiding the use of undesirable and hazardous precursors, such as PH3 or NaH2PO2, and rendering a material with a strong metal phosphide-graphene interaction. Moreover, NiP/NG and FeP/NG electrodes are demonstrated to be more efficient than the benchmark catalysts Pt/C and RuO2, for hydrogen evolution reaction and oxygen evolution reaction, respectively, at a large current density (300 mA/cm(2)). In addition, water electrolysis was carried out using NiP/NG//FeP/NG electrodes, also demonstrating improved efficiency and stability compared with Pt/C//RuO2 at a current density (400 mA/cm(2)) near industrial requirements., Financial support by the "MCIN/AEI/10.13039/501100011033/y por FEDER Una manera de hacer Europa'' (RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. The European Union project H2020-LC-SC3-2020-RES-RIA "EcoFuel''(grant agreement 101006701) is also gratefully acknowledged. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. L.P. also thanks the Generalitat Valenciana for a Grisolia postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Phosphorus-Rich Ruthenium Phosphide Embedded on a 3D Porous Dual-Doped Graphitic Carbon for Hydrogen Evolution Reaction

  • Anouar, Aicha
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Antonio Doménech-Carbó
[EN] Metal phosphides have recently emerged as promising electrocatalysts for hydrogen evolution reaction (HER). Herein, we report the synthesis of ruthenium diphosphide embedded on a dual-doped graphitic carbon by pyrolyzing chitosan beads impregnated with ruthenium chloride and phosphorus pentoxide. The as-synthesized RuP2@N-P-C displays a good electrocatalytic activity in acidic, neutral and alkaline media. We show that the HER activity of the electrocatalyst can be tuned by varying the concentration of Li+ cations. Co-diffusion effects on H+ exerted by Li+ on HER in the porous carbon matrix have been observed., Financial support by the Spanish Ministry of Science and Innovation (PDI2022- 126071OB-C21 and Severo Ochoa) and the Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. A.A. thanks assistance from Erasmus+ for partial support of her stay at Valencia. The European Commission is acknowledged for partial funding through the ECO2Fuel project. UEMF is acknowledged for financial support. A.A. thanks UEMF and UPV for an Erasmus+ 2019-1-ES01-KA107-062073 Scholarship.