Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Yong, Peng
  • Shi, Run
  • Antonio Franconetti
  • Melillo, Arianna
  • Forneli Rubio, Mª Amparo
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Light-assisted N-2 fixation to NH3 under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO2 NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N-2 hydrogenation activity of 1.6 mmolNH3 g(cat)(-1) h (-1) in the dark (350.C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmolNH3 g(cat)(-1) h (-1) (204 mmolNH3 g(Ru)(-1) h (-1)) under 1 Sun power illumination (1080 W/ m2) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr4+ acidity, increasing the basicity of the ZrO2 support. Moreover, partially reduced Cs delta+ (0 <delta < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N-2 adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/ 501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021-1230-S financed support by MCIN/AEI/ 10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (Flow-PhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MOF-derived ZnO-promoted NiCoP nanoparticles as efficient anodes for battery-supercapacitor hybrid devices

  • Hu, Jiajun
  • Rendon-Patiño, Alejandra
  • Khan, Il Son
  • Garzon-Tovar, Luis
  • Mateo, Diego
  • Gascon, Jorge
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Battery-supercapacitor hybrid devices are very convenient energy storage devices since they offer the combined advantages of both batteries (excellent energy density) and supercapacitors (high power density, long service life and high reversibility). However, cost-effective electrodes based on abundant and non-toxic materials exhibiting high energy storage density are still to be discovered. Herein, we have prepared ZnO promoted-NiCoP nanoparticles supported on graphitic carbon (ZnNiCoP/C) from heterotrimetallic MOF-74 derivatization. The electrochemical properties for energy storage of the resulting material have been investigated. The performance of ZnNiCoP/C as hybrid anode displays an improved capacity (343.3 mA & sdot;h & sdot;g- 1 at 2 A & sdot;g- 1) compared with its bimetallic counterparts. Performance-structure relationships have been established, demonstrating that ZnO works cooperatively with NiCoP maintaining the structural properties of the MOF-74 precursor, while the NiCoP particles have been determined as the electrochemically active sites. Moreover, complete asymmetric batterysupercapacitor hybrid devices have been fabricated comprising ZnNiCoP/C as anode and a N-doped carbon cathode, obtaining energy densities from 44.6 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 using a liquid electrolyte, and 35.4 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 with a quasi-solid-state electrolyte, highlighting the applicability of this material in energy storage applications. Furthermore, the fabricated device has demonstrated to retain more than 90 % of its initial performance after 5000 charge-discharge cycles, highlighting the stability of this material., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033 and PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa") , King Abdullah University of Science and Technology (KAUST) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Socie-dad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Simonelli, Laura
  • López, Núria
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (similar to 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol center dot g(-1)center dot h(-1) at 1 sun illumination and 400 degrees C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H-2 preferentially adsorbs to metallic Co, while CO2 adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-Generation EU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/Next Generation EU/PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective oxidative coupling of amines through light-activated bismuth halide perovskites

  • Lopes, Joana C.
  • Sampaio, Maria J.
  • Silva, Claudia G.
  • Faria, Joaquim L.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Bismuth halide perovskites have emerged as promising alternatives for sustainable and efficient photocatalysts for light-induced organic transformations. Caesium bismuth halide perovskites (Cs3Bi2(ClxBr1-x)9) with different ratios of chloride and bromide were synthesised using a one-step solution process. These perovskites were then employed as photocatalysts for the photocatalytic oxidative coupling of benzylamine (BZA) to produce N-benzylidenebenzylamine (BZI) under ultraviolet-visible light radiation at ambient conditions. The incorporation of bromide ions into the chloride-based perovskite resulted in a noticeable reduction in the bandgap, leading to an enhancement in the photocatalytic activity. Conversely, the addition of chloride ions within the bromide-based perovskite was found to be beneficial for the material's photostability while simultaneously maintaining its high photocatalytic activity. The optimal compromise between the stability and photocatalytic activity for the BZI production was achieved using Cs3Bi2(Cl0.8Br0.2)9, being attained a total BZA conversion and the maximum BZI production with 100 % of selectivity after 6 hours of irradiation. The efficiency of this photocatalyst was ascribed to the highest current density observed during the photocurrent experiments, which improves the charge carrier mobility of the resulting material., This work was supported by national funds through FCT/MCTES (PIDDAC): LSRE-LCM, UIDB/50020/2020 (DOI: 10.54499/UIDP/50020/2020) and UIDP/50020/2020 (DOI: 10.54499/UIDP/50020/2020); and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020). The authors also thank the project ClimActic (NORTE-01-0145-FEDER-000071), funded by European Regional Development Fund (ERDF) through COMPETE2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) and by national funds (PIDDAC) through FCT/MCTES. H.G. and J. A. thank the financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/ PRTRCEX2021-1230-S) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)). JCL acknowledges the PhD research grant from FCT, Ref. 2020.04651.BD. . MJS acknowledges FCT funding under the Scientific Employment Stimulus - Institutional Call (CEECINST/00010/2021).