Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning the Photocatalytic Activity of Ti-Based Metal-Organic Frameworks through Modulator Defect-Engineered Functionalization

  • Abánades Lázaro, Isabel
  • Szalad, Horatiu
  • Valiente, Pablo
  • Martí-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defect engineering is a valuable tool to tune the photocatalytic activity of metal-organic frameworks (MOFs). Inducing defects through the attachment of functionalized modulators can introduce cooperative units that can tune the bandgap of the material and enhance their chemical, thermal, and photostabilities among other properties. However, the majority of defect engineering studies for photocatalytic applications are limited to Zr-based MOFs, and there is still a lack of interrelation between synthetic variables, the resultant MOF properties, and their effect on their photocatalytic performance. We report a comprehensive study on the defect engineering of the titanium heterometallic MOF MW-10 by fluoro- and hydroxy-isophthalic acid (Iso) modulators, rationalizing the effect of the materials' properties on their photocatalytic activity for hydrogen production. The Iso-OH modified MOFs present a volcano-type profile with a 2.3-fold increase in comparison to the pristine materials, whereas the Iso-F modified samples have a gradual increase with up to a 4.2-fold enhancement. It has been demonstrated that similar to 9% of Iso-OH modulator incorporation produces similar to 40% defects, inducing band gap reduction and longer excited states lifetime. Similar defect percentages have been generated upon near 40% Iso-F modulator incorporation; however, negligible band gap changes and shorter excited states lifetimes were determined. The higher photocatalytic activity in Iso-F modulator derived MOF has been attributed to the effect of the divergent defect-compensation modes on the materials' photostability and to the increase in the external surface area upon introduction of Iso-F modulator., This publication is part of a project that has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska (Grant Agreement No. 837804, DefTiMOFs, MSCA-IF-2018). I.A.L. thanks the European Union's Horizon 2020 research and innovation programme for the receipt of Marie Sklodowska-Curie Actions Individual Fellowship and thanks The University of Valencia and Functional Materials Research Group for research facilities and the Maria de Maeztu Units of Excellence Programme (CEX-2019-000919-M). H.S. also thanks the European Union's Horizon 2020 research and innovation programme Solar2Chem, under the Marie Sklodowska-Curie Grant Agreement No. 861151. H.G. and J.A. acknowledge financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

2D/2D Cu-tetrahydroxyquinone MOF/N-doped graphene heterojunction as photocatalyst for overall water splitting

  • Szalad, Horatiu
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A novel 2D/2D heterojunction (CuTHQ/NG) has been prepared by in situ growth of the 2D CuTHQ MOF on defective N-doped graphene (NG), and its photocatalytic activity for overall water splitting studied in detail. CuTHQ/NG heterojunction has demonstrated better photocatalytic activity (480 mu mol/g) than the individual components (257 and 65 mu mol/g for CuTHQ and NG, respectively) for H2 evolution. Furthermore, unlike the individual components, the as-prepared 2D/2D CuTHQ/NG heterojunction promotes overall water splitting under simulated sunlight (164 mu mol of H2/g and 80 mu mol of O2/g). We have also studied the photo-induced charge separation and recombination reactions. Photocurrent measurements and emission quenching experiments have confirmed improved charge separation in the CuTHQ/NG heterojunction. Moreover, the charge recombination kinetics have been investigated with transient absorption spectroscopy. Electron/hole recombination in the heterojunction has been determined more than one order of magnitude slower (8.9 mu s) than the mechanical mixture of CuTHQ and NG (0.35 mu s). Finally, the photochemical stability of the 2D/2D heterojunction has been investigated performing a long-term (96 h) experiment, demonstrating near linear H2 evolution along the irradiation time. (c) 2022 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/)., Financial support by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital (GRAPHICA MFA/2022/023) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. This project has also received funding from the European Union's Horizon 2020 research and innovation programmes Solar2Chem, METHASOL and MOF2H2 under grant agreement No. 861151, No. 101022649, No. 101084131 respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Simonelli, Laura
  • López, Núria
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (similar to 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol center dot g(-1)center dot h(-1) at 1 sun illumination and 400 degrees C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H-2 preferentially adsorbs to metallic Co, while CO2 adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-Generation EU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/Next Generation EU/PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Heterostructured PHI-PTI/Li+Cl- Carbon Nitrides for Multiple Photocatalytic Applications

  • Galushchinski, Alexey
  • Pulignani, Carolina
  • Szalad, Horatiu
  • Reisner, Erwin
  • Tarakina, Nadezda V.
  • Pelicano, Christian Mark
  • Savatee, Oleksandr
  • Antonietti, Markus
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two series of novel carbon nitride photocatalysts, Rho-CN ("rhodizonate-doped carbon nitride") and Rho-CN-TC (Rho-CN treated in potassium thiocyanate melt), are synthesized in a multistep fashion via copolymerization of cyanamide with potassium rhodizonate. The formed ionic carbon nitrides are composed of poly(triazine imide) (PTI/Li+Cl-) and potassium poly(heptazine imide) (K-PHI) phases and provide a broad absorption range up to 800 nm. The photocatalysts are characterized by several techniques (including diffuse reflectance ultraviolet-visible, powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and electrochemical methods) and studied in a series of photocatalytic reactions, including red light-promoted benzylamine oxidation, dual photoredox/nickel C-N cross-coupling, and hydrogen peroxide evolution. The optimal ratio of rhodizonate dopant in its mixture with cyanamide is found to be 0.5 mol%. The performance of the newly synthesized materials is comparable to the activities of the benchmark catalysts K-PHI and CN-OA-m (defective poly(heptazine imide) doped with oxamide), while not requiring more expensive nitrogen sources for preparation, like 5-aminotetrazole, or multiple oven cycles., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 861151 Solar2Chem. The material presented and views expressed here are the responsibility of the authors only. The EU Commission takes no responsibility for any use made of the information set out. J.A.S. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I). A.G. and C.P. would like to thank Dr. Camilo A. Mesa (Institute of Advanced Materials (INAM), Universitat Jaume I (UJI)) for help with impedance data processing. Michael Born (electric workshop of the MPICI) is acknowledged for his contribution to this project.Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fe clusters embedded on N-doped graphene as a photothermal catalyst for selective CO2 hydrogenation

  • Szalad, Horatiu
  • Peng, Lu
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] In comparison with the Co analog, small Fe clusters incorporated in a graphene matrix exhibit a photo-assisted increase of 110% in reverse water gas shift CO2 hydrogenation under UV-Vis light irradiation. Available data indicate that the photo-assistance derives from light absorption by the N-doped graphene followed by charge recombination at the Fe clusters, increasing their local temperature., L. P. prepared and characterized the catalysts. H. S. performed the photocatalytic reactions and mechanistic experiments. A. P. supervised the materials preparation and characterization. J. A. performed the TA measurements. This work was supervised by J. A. and H. G. who wrote the draft. The manuscript was revised by all the authors. Financial support by the Spanish Ministry of Science and Innovation (RTI201898237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. This project has also received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 861151.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fe clusters embedded on N-doped graphene as a photothermal catalyst for selective CO2hydrogenation

  • Szalad, Horatiu
  • Peng, Lu
  • Primo, Ana
  • Albero, J.
  • García Gómez, Hermenegildo
In comparison with the Co analog, small Fe clusters incorporated in a graphene matrix exhibit a photo-assisted increase of 110% in reverse water gas shift COhydrogenation under UV-Vis light irradiation. Available data indicate that the photo-assistance derives from light absorption by the N-doped graphene followed by charge recombination at the Fe clusters, increasing their local temperature., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. This project has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 861151., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the Photocatalytic Activity of Ti-Based Metal–Organic Frameworks through Modulator Defect-Engineered Functionalization

  • Abánedes Lázaro, Isabel
  • Szalad, Horatiu
  • Valiente, Pablo
  • Albero, J.
  • García Gómez, Hermenegildo
  • Martí-Gastaldo, Carlos
Defect engineering is a valuable tool to tune the photocatalytic activity of metal–organic frameworks (MOFs). Inducing defects through the attachment of functionalized modulators can introduce cooperative units that can tune the bandgap of the material and enhance their chemical, thermal, and photostabilities among other properties. However, the majority of defect engineering studies for photocatalytic applications are limited to Zr-based MOFs, and there is still a lack of interrelation between synthetic variables, the resultant MOF properties, and their effect on their photocatalytic performance. We report a comprehensive study on the defect engineering of the titanium heterometallic MOF MUV-10 by fluoro- and hydroxy-isophthalic acid (Iso) modulators, rationalizing the effect of the materials’ properties on their photocatalytic activity for hydrogen production. The Iso-OH modified MOFs present a volcano-type profile with a 2.3-fold increase in comparison to the pristine materials, whereas the Iso-F modified samples have a gradual increase with up to a 4.2-fold enhancement. It has been demonstrated that ∼9% of Iso-OH modulator incorporation produces ∼40% defects, inducing band gap reduction and longer excited states lifetime. Similar defect percentages have been generated upon near 40% Iso-F modulator incorporation; however, negligible band gap changes and shorter excited states lifetimes were determined. The higher photocatalytic activity in Iso-F modulator derived MOF has been attributed to the effect of the divergent defect-compensation modes on the materials’ photostability and to the increase in the external surface area upon introduction of Iso-F modulator., This publication is part of a project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska (Grant Agreement No. 837804, DefTiMOFs, MSCA-IF-2018). I.A.L. thanks the European Union’s Horizon 2020 research and innovation programme for the receipt of Marie Skłodowska-Curie Actions Individual Fellowship and thanks The University of Valencia and Functional Materials Research Group for research facilities and the Maria de Maeztu Units of Excellence Programme (CEX-2019-000919-M). H.S. also thanks the European Union’s Horizon 2020 research and innovation programme Solar2Chem, under the Marie Skłodowska-Curie Grant Agreement No. 861151. H.G. and J.A. acknowledge financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Goberna-Ferrón, Sara
  • Simonelli, Laura
  • Albero, J.
  • López, Nuria
  • García Gómez, Hermenegildo
The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (∼ 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol·g·h at 1 sun illumination and 400 °C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H preferentially adsorbs to metallic Co, while CO adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-1230-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

2D/2D Cu-tetrahydroxyquinone MOF/N-doped graphene heterojunction as photocatalyst for overall water splitting

  • Szalad, Horatiu
  • Uscategui, Andres
  • Albero, J.
  • García Gómez, Hermenegildo
A novel 2D/2D heterojunction (CuTHQ/NG) has been prepared by in situ growth of the 2D CuTHQ MOF on defective N-doped graphene (NG), and its photocatalytic activity for overall water splitting studied in detail. CuTHQ/NG heterojunction has demonstrated better photocatalytic activity (480 μmol/g) than the individual components (257 and 65 μmol/g for CuTHQ and NG, respectively) for H evolution. Furthermore, unlike the individual components, the as-prepared 2D/2D CuTHQ/NG heterojunction promotes overall water splitting under simulated sunlight (164 μmol of H/g and 80 μmol of O/g). We have also studied the photo-induced charge separation and recombination reactions. Photocurrent measurements and emission quenching experiments have confirmed improved charge separation in the CuTHQ/NG heterojunction. Moreover, the charge recombination kinetics have been investigated with transient absorption spectroscopy. Electron/hole recombination in the heterojunction has been determined more than one order of magnitude slower (8.9 μs) than the mechanical mixture of CuTHQ and NG (0.35 μs). Finally, the photochemical stability of the 2D/2D heterojunction has been investigated performing a long-term (96 h) experiment, demonstrating near linear H evolution along the irradiation time., Financial support by European Union – Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital (GRAPHICA MFA/2022/023) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. This project has also received funding from the European Union's Horizon 2020 research and innovation programmes Solar2Chem, METHASOL and MOF2H2 under grant agreement No. 861151, No. 101022649, No. 101084131 respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Heterostructured PHI-PTI/Li+Cl− Carbon Nitrides for Multiple Photocatalytic Applications

  • Galushchinskiy, Alexey
  • Pulignani, Carolina
  • Szalad, Horatiu
  • Reisner, Erwin
  • Albero, J.
  • Tarakina, Nadezda V.
  • Pelicano, Christian Mark
  • García Gómez, Hermenegildo
  • Savateev, Oleksandr
  • Antonietti, Markus
Two series of novel carbon nitride photocatalysts, Rho-CN (“rhodizonate-doped carbon nitride”) and Rho-CN-TC (Rho-CN treated in potassium thiocyanate melt), are synthesized in a multistep fashion via copolymerization of cyanamide with potassium rhodizonate. The formed ionic carbon nitrides are composed of poly(triazine imide) (PTI/LiCl) and potassium poly(heptazine imide) (K-PHI) phases and provide a broad absorption range up to 800 nm. The photocatalysts are characterized by several techniques (including diffuse reflectance ultraviolet–visible, powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and electrochemical methods) and studied in a series of photocatalytic reactions, including red light-promoted benzylamine oxidation, dual photoredox/nickel C–N cross-coupling, and hydrogen peroxide evolution. The optimal ratio of rhodizonate dopant in its mixture with cyanamide is found to be 0.5 mol%. The performance of the newly synthesized materials is comparable to the activities of the benchmark catalysts K-PHI and CN-OA-m (defective poly(heptazine imide) doped with oxamide), while not requiring more expensive nitrogen sources for preparation, like 5-aminotetrazole, or multiple oven cycles., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 861151 Solar2Chem. The material presented and views expressed here are the responsibility of the authors only. The EU Commission takes no responsibility for any use made of the information set out. J.A.S. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I). A.G. and C.P. would like to thank Dr. Camilo A. Mesa (Institute of Advanced Materials (INAM), Universitat Jaume I (UJI)) for help with impedance data processing. Michael Born (electric workshop of the MPICI) is acknowledged for his contribution to this project. Open Access funding enabled and organized by Projekt DEAL., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the Optimal Cerium Content for Boosting the Photoresponse Activity of Mixed-Metal Zr/Ce-Based Metal-Organic Frameworks through a Photodynamic and Photocurrent Correlation: Implications on Water Splitting Efficiency

  • Bhattacharyya, A.
  • Gutierrez, Mario
  • Cohen, Boiko
  • Szalad, Horatiu
  • Albero, J.
  • García Gómez, Hermenegildo
  • Douhal, Abderrazzak
Mixed-metal-organic frameworks (MMOFs) have emerged as promising photocatalyst candidates in multiple reactions. For instance, the doping of Zr-UiO-type MOFs with Ce atoms increases their photoactivity owing to a better overlap between the organic linker and Ce orbitals. However, it is not clear which is the ideal content of Ce to reach the optimal photocatalytic performance. Herein, a series of MMOFs isostructural to UiO-66 and with napthalene-2,6-dicarboxylate (NDC) as a linker were synthesized and characterized. The Ce content was varied from 0 to 100% and their corresponding structural, chemical, photodynamic, and photoresponse properties were investigated. Powder X-ray diffraction shows that when the content of Ce is 12% onward, in addition to the UiO-type structure, a second crystalline structure is cosynthesized (NDC-Ce). Steady-state and femtosecond (fs) to millisecond (ms) spectroscopy studies reveal the existence of two competing processes: a linker excimer formation and an ultrafast ligand-to-cluster charge transfer (LCCT) phenomenon from the organic linker to Zr/Ce metal clusters. The ultrafast (fs-regime) LCCT process leads to the formation of long-lived charge-separated states, which are more efficiently photoproduced when the content of Ce reaches 9%, suggesting that the related material would show the highest photoactivity. Photoaction spectroscopic measurements corroborate that the sample with 9% of Ce exhibits the maximum photocatalytic efficiency, which is reflected in a 20% increment in overall water splitting efficiency compared with the monometallic Zr-based MOF. The current study demonstrates the relationship between the photodynamical properties of the MMOFs and their photocatalytic performance, providing new findings and opening new ways for improving the design of new MOFs with enhanced photocatalytic activities., A.B. acknowledges Marie Skłodowska-Curie Actions (Project H2020-MSCA-IF-2020-101032472) for the postdoctoral fellowship. This research was also supported by grants: PID2020-116519RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 and SBPLY/21/180501/000108 funded by JCCM and by the EU through “Fondo Europeo de Desarollo Regional” (FEDER). M.G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Center of Excellence CEX2021-001230-S and RTI2018-89237-CO2-1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38) is gratefully acknowledged. H.S. thanks the ITN Marie-Skłodowska-Curie Solar2Chem (grant agreement No. 861151) for a postgraduate research contract. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR). We thank the Servicio de Instrumentación (IRICA, UCLM) for the PXRD and SEM measurements and the Servicio Interdepartamental de Investigación (SIdI) of the Universidad Autónoma de Madrid (UAM) for the elemental analysis of the studied MOFs., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-Lived Photo-Response of Multi-Layer N-Doped Graphene-Based Films

  • Odutola, Jokotadeola A.
  • Szalad, Horatiu
  • Albero, J.
  • García Gómez, Hermenegildo
  • Tkachenko, Nikolai V.
New insights into the mechanism of the improved photo(electro)catalytic activity of graphene by heteroatom doping were explored by transient transmittance and reflectance spectroscopy of multi-layer N-doped graphene-based samples on a quartz substrate prepared by chitosan pyrolysis in the temperature range 900-1200 °C compared to an undoped graphene control. All samples had an expected photo-response: fast relaxation (within 1 ps) due to decreased plasmon damping and increased conductivity. However, the N-doped graphenes had an additional transient absorption signal of roughly 10 times lower intensity, with 10-50 ps formation time and the lifetime extending into the nanosecond domain. These photo-induced responses were recalculated as (complex) dielectric function changes and decomposed into Drude-Lorentz parameters to derive the origin of the opto(electronic) responses. Consequently, the long-lived responses were revealed to have different dielectric function spectra from those of the short-lived responses, which was ultimately attributed to electron trapping at doping centers. These trapped electrons are presumed to be responsible for the improved catalytic activity of multi-layer N-doped graphene-based films compared to that of multi-layer undoped graphene-based films., The authors thank the European Union’s Horizon 2020 research and innovation program for the funding received under the Marie Skłodowska-Curie grant agreement no. 861151 (SOLAR2CHEM). N.V.T. thanks the Academy of Finland Flagship Programme, Photonics Research and Innovation (PREIN), Decision no. 320165 for the financial support. J.A. and H.G. thank the European Union’s Horizon 2020 research and innovation programme METHASOL under grant agreement no. 101022649, the Spanish Ministry of Science and Innovation (PDI2021-126071OB-C2), and Generalitat Valenciana (Prometeo 2021-038) for the financial support. J.A. is also grateful to the Ramon y Cajal grant (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR.