Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A critical evaluation of platinum deposition techniques for hydrogen production in microbial electrolysis cells

  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Rodriguez, Jesús|||0000-0002-8601-0466
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Gabriel, David|||0000-0002-7713-4192
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Mireia|||0000-0002-2240-6410
Despite its high cost, Pt is the usual catalyst for hydrogen production in the cathode of Microbial Electrolysis Cells (MECs). Its effectiveness depends not only on the amount deposited but also on the availability and distribution of Pt nanoparticles on the cathode surface. This work provides a comprehensive study of the effectiveness of the Pt coating with five deposition techniques: spray, electrospray, brush painting, doctor blade and sputtering. The performance of the cathodes was studied with different Pt loadings by monitoring the current intensity and H2 production in MECs. Furthermore, cathodes were characterized morphologically using scanning electron microscopy together with energy-dispersive X-ray spectroscopy to study their Pt surface distribution and composition. Sputtering was initially discarded due to Pt detachment. When using the same amount of Pt (0.50 mg Pt cm-2), the highest current density was obtained for electrospray (2.0 mA cm-2), followed by spray (1.9 mA cm-2), brush painting (1.6 mA cm-2) and doctor blade (1.2 mA cm-2). Hence, electrospray improved 20 % the results obtained by the default method of brush painting. Electrospray and spray provided better performance because of the direct deposition of Pt on the carbon fibres creating a compact Pt layer on the electrode surface. Furthermore, it was observed that the cell performance decreased significantly with decreasing amount of Pt per cm2, observing the best performance with the highest Pt load tested (0.5 mg Pt cm-2) regardless of the deposition technique.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

A critical review on the effect of different carbon sources on EBPR, Revaluation of performance and applications

  • Zhang, Congcong|||0000-0003-3693-4705
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Enhanced biological phosphorus removal (EBPR), as one of the most sustainable and economical technologies for efficient P removal from wastewater, is widely applied in full-scale wastewater treatment plants (WWTPs). The types of carbon sources exert key effects on the performance of EBPR, resulting in different microbial communities. Polyphosphate accumulating organisms (PAO) contribute to P removal. However, the dominance of glycogen accumulating organisms (GAO) under certain carbon source can outcompete PAO, leading to reduced stability of EBPR and even system failure. A key aspect in the choice of carbon source is the potential to alter PAO/GAO ratio and thus the EBPR performance. The advanced investigations show more versatile metabolic pathways of various putative PAO (e.g. Tetrasphaera, Dechloromonas, Thiothrix) with different carbon source strategies, which could be beneficial for the full-scale WWTPs to increase the resistance to unstable environment. This review carefully re-evaluates the application of different carbon sources (sole, multiple or complex carbon sources) in the field of EBPR in recent years, with special emphasis on the fermentation products from wastewater and waste solids as an additional carbon source by different strategies. The application of waste fermentation as additional carbon source not only shows successful system performance, but also avoids the need for commercial carbon source input and alleviates the waste disposal problem, which could be a promising development trend in view of the insufficient COD of raw wastewater as well as the environmental pressure problem.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Long-term anaerobic conversion of lindane by electrochemically generated hydrogen

  • Wang, Guanxiong|||0009-0006-4859-7143
  • Fernández-Verdejo, David|||0000-0002-3234-4006
  • Marco-Urrea, Ernest|||0000-0002-8033-6553
  • Guisasola, Albert|||0000-0002-3012-7964
  • Blánquez, Paqui|||0000-0003-2443-9977
Lindane (γ‑HCH) persists in many aquifers where electron‑donor scarcity limits reductive dechlorination. Here we present a long‑term (116 d) microbial electrochemical technology (MET) that supplies cathodic H₂ to sustain lindane biotransformation. Sequentially decreasing the graphite‑brush cathode potential from −0.6 to −0.7 and −0.8 V versus SHE raised headspace H₂ from < 0.1% to > 1% (v/v) and accelerated lindane degradation rates. Product inhibition led by the accumulation of monochlorobenzene and benzene stalled the culture. The application of three 15‑min N₂ flushing cycles restored activity each time and boosted the removal rate from 33.3 ± 1.2 (µM/d) to 85.3 ± 4.5 (µM/d) at −0.8 V. The value of the poised cathodic potential also affected the product distribution ratio of monochlorobenzene to benzene. Thus, the MET did not just provide a source of electrons but also seems to have an impact on the transformation pathway of lindane. 16S‑rRNA profiling revealed a biocathode dominated by Shewanella (14.6 ± 5.8%) and Pseudomonas (35.0 ± 8.2%), two genera potentially involved either in the direct transformation of lindane or in establishing an interspecies electron transfer network that enhances its reduction.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An integrated TOPSIS framework with Full-Range Weight Sensitivity Analysis for robust decision analysis

  • Gaona, Àlex|||0000-0002-6912-5333
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Multi-criteria decision-making (MCDM) is widely used in engineering to assist in the selection of the best alternative according to various criteria. Many MCDM methods rely on fixed weight assignments, limiting their ability to reflect uncertainties or variations in decision-maker preferences. This work shows a novel approach that integrates the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) with conventional one-at-a-time Weight Sensitivity Analysis (WSA) and, for the first time, introduces the Full-Range Weight Sensitivity Analysis (FRWSA). FRWSA enumerates all admissible weight vectors on a discretized simplex and summarizes robustness as dominance frequency, the share of the simplex for which an alternative ranks first. A wastewater treatment plant (WWTP) case study evaluating four different configurations illustrates the approach. Using FRWSA with step h = 0.05 (10 million weight combinations), configuration A2/O-D dominates 82.80% of the weight simplex, with UCT at 12.17%, A2/O-S at 4.94%, and BARD at 0.09%. Comparing with Monte Carlo sampling, FRWSA provides a deterministic, variance-free baseline: MC-Dirichlet with is nearly identical (JSD 0.001 bits), is close but distinct (JSD 0.007-0.008 bits), and plain MC remains farther (JSD 0.043 bits) over 104 - 107 draws. The framework improves transparency via global coverage and boundary diagnostics and is method-agnostic (replicated with VIKOR in the SI). A reusable MATLAB implementation is provided to facilitate adoption. This integrated analysis supports robust and transparent engineering decisions wherever weight uncertainty matters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nitrite pathway in A2/O WWTPs, Modelling organic matter reduction, operational cost and N2O emissions

  • Gaona, Àlex|||0000-0002-6912-5333
  • Solis Duran, Borja|||0000-0003-0305-6168
  • Guerrero, Javier|||0000-0003-2902-4893
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Deciding whether the implementation of the nitrite pathway is useful for the treatment of a given wastewater depends on several criteria such as organic matter availability, N and P removal, N2O emissions and operational costs. This work is a simulation-based study with a conventional Anaerobic/Anoxic/Oxic (A2/O) WWTP where the nitrite pathway can be implemented. The outcomes are general correlations to calculate the minimum COD requirements for a certain influent and a practical decision tree on the opportunities of nitrite pathway in A2/O WWTPs as a function of the influent wastewater composition (for P and N concentrations in the ranges 3-11 mgPO4 -3-P·L-1 and 20-60 mg NH4 +-N·L-1). This study shows that the implementation of the nitrite pathway reduces the COD requirements (depending on the influent, between 9 and 68%). It also can lead to a reduction in aeration costs. For an equivalent COD in the influent, the implementation of the nitrite pathway compared to the nitrate pathway results in a reduction of 41-47% in aeration costs and similar sludge production, leading to a reduction in the operational cost index of 10-16%. However, it is essential to note that this strategy can also lead to increased N2O emissions, with an emission factor for the nitrite pathway in the range of 2.5-17 times that of the nitrate pathway.