Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Phononic and photonic nanostructures

  • Sotomayor Torres, C. M.
Trabajo presentado a la Conferencia "BNC-b Research Meeting" celebrada en Barcelona el 14 de julio de 2011.-- et al., The Phononic and Photonic nanostructures (P2N) group investigates the interaction of photons, phonons and electrons in nanoscale condensed matter underpinn ed by research in nanofabrication and nanometrology. Its long term aim is to develop new information technology concepts where information processing is achieved with multiple state variables. The P2N group research on nanoscale thermal transport impacts thermal management in nanoelectronics. Similarly, the optical studies of acoustic effects in confined and phononic systems explores the limits of couple state-variables. The technology-oriented work on exciton-plasmon coupling printed polymer-based photonic structures targets enhanced light extraction from light sources, while the quest for novel nanometrology paves the way for future standards in nanotechnology. Finally. self- assembly research is oriented to pushing the limits of lithography while simultan eously enabling new functions for Beyond CMOS., The research carried out at the P2N is funded by the following projects: NANOPACK (FP7 grant agreement no. 216176); NanoICT (FP7 grant agreement no. 216165); NAPANIL (FP7 grant agreement no. 214249); TAILPHOX (FP7 grant agreement no. 233883); SEAL (FP7 grant agreement no. 257379); LAMAND (FP7 grant agreement no. 245565); NANOPOWER (FP7 grant agreement no. 256959); NANOFUNCTION (FP7 grant agreement no. 257375); NANO-TEC (FP7 grant agreement no. 257964); Collaboration project between CSIC and the University of Chile (MICINN contract no. 2008CL0046); Support to Emerging Groups by the Agencia de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya (AGAUR contract no. 2009 SGR 150); ACPHIN (MICINN contract no. FIS2009-10150); nanoTHERM (CONSOLIDER-Ingenio 2010, MICINN contract number CSD2010-00044); Juan de la Cierva programme - Towards a phonon source based on opto-mechanical crystals (MICINN contract number JCI-2010-06591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced light extraction in ITO-free OLEDs using double-sided printed electrodes

  • Reboud, Vincent
  • Sepúlveda, Borja
  • Kehagias, N.
  • Lira-Cantú, Mónica
  • Sotomayor Torres, C. M.
We show how nanoimprint lithographic techniques are particularly suited for the realization of OLED device structures. We tested them to realize nanopatterned metallic electrodes containing photonic crystals to couple the light out and plasmonic crystals showing extraordinary transmission. At similar current densities, a two-fold electroluminescence is achieved with devices having double-sided structured metallic electrodes as compared to a control OLED with an ITO anode. The use of combined nanoimprint lithography processes has the potential to expand the performance range of various organic optoelectronic devices. © 2012 The Royal Society of Chemistry., This work was supported by the EC project NaPaNIL (contract nº 214249), the MICINN project ACPHIN (contract nº FIS2009-150) and the Catalan project 2009-SGR-150., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lasing in nanoimprinted two-dimensional photonic crystal band-edge lasers

  • Reboud, Vincent
  • Romero-Vivas, J.
  • Lovera, P.
  • Kehagias, N.
  • Kehoe, Timothy
  • Redmon, G.
  • Sotomayor Torres, C. M.
We demonstrate optically pumped polymer band-edge lasers based on a two-dimensional photonic crystal slab fabricated by nanoimprint lithography (NIL). Lasing was obtained at the photonic band-edge, where the light exhibits a low group velocity at the ¿ point of the triangular lattice photonic crystal band structure. The active medium was composed of a dye chromophore-loaded polymer matrix directly patterned in a single step by nanoimprint lithography. Plane-wave and finite difference time domain algorithms were used to predict experimental lasing frequencies and the lasing thresholds obtained at different ¿ points. A low laser threshold of 3 ¿J/mm 2 was achieved in a defect-free photonic crystal thus showing the suitability of nanoimprint lithography to produce cost-efficient optically pumped lasers. © 2013 American Institute of Physics., The support of the EC-funded project NaPaNIL is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metallic nanoparticles enhanced the spontaneous emission of semiconductor nanocrystals embedded in nanoimprinted photonic crystals

  • Reboud, Vincent
  • Placido, Tiziana
  • Curri, M. Lucía
  • Kehoe, Timothy
  • Kehagias, N.
  • Redmon, G.
  • Sotomayor Torres, C. M.
We report on a method to enhance the light-emission efficiency of printable thin films of a polymer doped with luminescent (CdSe)ZnS nanocrystals via metallic nanoparticles and nanoimprinted photonic crystals. We experimentally show a strong fluorescence enhancement of nanocrystals by coupling exciton-plasmon with the localized surface plasmon of metallic nanoparticles. The emitted light is efficiently diffracted by photonic crystals structures directly imprinted in the nanocomposite polymer. By combining the field susceptibility technique with optical Bloch equations, we examine the interaction of the quantum and plasmonic entities at small distances. © 2013 The Royal Society of Chemistry., This work was supported by the EC project NaPaNIL (Contract no. 214249), the MICINN project ACPHIN (contract no. FIS2009-150) and the Catalan project 2009-SGR-150., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Integrated 3D hydrogel waveguide out-coupler by step-and-repeat thermal nanoimprint lithography: A promising sensor device for water and pH

  • Francone, Achille
  • Kehoe, Timothy
  • Obieta, Isabel
  • Sáez-Martínez, Virginia
  • Bilbao, Leire
  • Khokhar, Ali Z.
  • Gadegaard, Nikolaj
  • Simao, Claudia
  • Kehagias, N.
  • Sotomayor Torres, C. M.
Hydrogel materials offer many advantages for chemical and biological sensoring due to their response to a small change in their environment with a related change in volume. Several designs have been outlined in the literature in the specific field of hydrogel-based optical sensors, reporting a large number of steps for their fabrication. In this work we present a three-dimensional, hydrogel-based sensor the structure of which is fabricated in a single step using thermal nanoimprint lithography. The sensor is based on a waveguide with a grating readout section. A specific hydrogel formulation, based on a combination of PEGDMA (Poly(Ethylene Glycol DiMethAcrylate)), NIPAAm (N-IsoPropylAcrylAmide), and AA (Acrylic Acid), was developed. This stimulus-responsive hydrogel is sensitive to pH and to water. Moreover, the hydrogel has been modified to be suitable for fabrication by thermal nanoimprint lithography. Once stimulated, the hydrogel-based sensor changes its topography, which is characterised physically by AFM and SEM, and optically using a specific optical set-up., The authors acknowledge the financial support from: the EU project, NAPANIL project (No. FP7-CP-IP 214249), the MINECO project PHENTOM (No. FIS2015-70862). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and funding from the CERCA Programme/Generalitat de Catalunya., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phonon attenuation in the GHz regime, Measurements and simulations with a visco-elastic material model

  • Bryner, Juerg
  • Kehoe, Timothy|||0000-0002-7051-5910
  • Vollmann, Jacqueline
  • Aebi, Laurent
  • Wenke, Ingo
  • Dual, Jurg
Aluminum and PMMA thin film samples are investigated regarding their mechanical properties like speed of sound and attenuation. Aluminum is often used as a transducer layer for pump probe laser measurements and different PMMA types have a large importance in the nanoimprinting technique. The measurements are performed on a short pulse laser pump probe setup, where bulk wave packets in the GHz regime are excited and detected using near infrared laser pulses of less than 100 fs duration. This contact-free and non-destructive measurement method is explained. In order to extract the attenuation precisely from the measurements, the entire experimental setup is simulated numerically: The heat distribution and the thermo-elastic wave excitation caused by the laser pulse, the mechanical wave propagation, and the photo-acoustic detection. By means of the visco-elastic modeling of the wave propagation, the simulations are fitted to the measurements by tuning the attenuation parameters in the numerical model. In this way it is possible to extract the attenuation from the measurements. First, two different types of Aluminum on a sapphire substrate are analyzed: Electron beam evaporated Aluminum and sputtered Aluminum, respectively. The thicknesses of the Aluminum films are in the range of 300 nm. It turns out that the attenuation is much higher in the sputtered Aluminum film. Afterwards, PMMA thin films used for nanoimprinting with thicknesses between 300 and 600 nm are analyzed. The PMMA thin films are spincoated onto a Silicon wafer and covered with an Aluminum transducer layer. The very good agreement between the measurements and simulations of the stacked samples allows a reliable determination of the attenuation in the PMMA films in the GHz regime.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Integrated 3D hydrogel waveguide out-coupler by step-and-repeat thermal nanoimprint lithography, A promising sensor device for water and pH

  • Francone, Achille|||0000-0001-7757-9901
  • Kehoe, Timothy|||0000-0002-7051-5910
  • Obieta, Isabel|||0000-0002-9132-6609
  • Sáez Martínez, Virginia|||0000-0003-4061-3410
  • Bilbao, Leire
  • Khokhar, Ali Z.
  • Gadegaard, Nikolaj
  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Hydrogel materials offer many advantages for chemical and biological sensoring due to their response to a small change in their environment with a related change in volume. Several designs have been outlined in the literature in the specific field of hydrogel-based optical sensors, reporting a large number of steps for their fabrication. In this work we present a three-dimensional, hydrogel-based sensor the structure of which is fabricated in a single step using thermal nanoimprint lithography. The sensor is based on a waveguide with a grating readout section. A specific hydrogel formulation, based on a combination of PEGDMA (Poly(Ethylene Glycol DiMethAcrylate)), NIPAAm (N-IsoPropylAcrylAmide), and AA (Acrylic Acid), was developed. This stimulus-responsive hydrogel is sensitive to pH and to water. Moreover, the hydrogel has been modified to be suitable for fabrication by thermal nanoimprint lithography. Once stimulated, the hydrogel-based sensor changes its topography, which is characterised physically by AFM and SEM, and optically using a specific optical set-up.