Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Band gaps and cavity modes in dual phononic and photonic strip waveguides

  • Pennec, Yan
  • Rouhani, Bahram Djafari
  • Li, C.
  • Escalante Fernández, José María
  • Benchabane, Sarah
  • Laude, Vincent
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Papanikolaou, N.
[EN] We discuss theoretically the simultaneous existence of phoxonic, i.e., dual phononic and photonic, band gaps in a periodic silicon strip waveguide. The unit-cell of this one-dimensional waveguide contains a hole in the middle and two symmetric stubs on the sides. Indeed, stubs and holes are respectively favorable for creating a phononic and a photonic band gap. Appropriate geometrical parameters allow us to obtain a complete phononic gap together with a photonic gap of a given polarization and symmetry. The insertion of a cavity inside the perfect structure provides simultaneous confinement of acoustic and optical waves suitable to enhance the phonon-photon interaction. © 2011 Copyright 2011 Author(s)., This work was supported by the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX No 233883.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A one-dimensional optomechanical crystal with a complete phononic band gap

  • Gomis Bresco, Jordi
  • Navarro Urríos, Daniel
  • Oudich, M.
  • El-Jallal, S.
  • Puerto Garcia, Daniel
  • Chavez, E.
  • Pennec, Y.
  • Djafari-Rouhani, B.
  • Alzina, F.
  • Sotomayor Torres, C.M.
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Among their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide gigahertz phonons suitable for coherent phonon manipulation. Different demonstrations of coupling of infrared photons and gigahertz phonons in cavities created by inserting defects on OM crystals have been performed. However, the considered structures do not show a complete phononic bandgap, which should enable longer lifetimes, as acoustic leakage is minimized. Here we demonstrate the excitation of acoustic modes in a one-dimensional OM crystal properly designed to display a full phononic bandgap for acoustic modes at 4 GHz. The modes inside the complete bandgap are designed to have high-mechanical Q-factors, limit clamping losses and be invariant to fabrication imperfections., This work was supported by the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX No 233883. J.G.-B., D.N.-U., E.C., F.A. and C.M.S.-T. acknowledge financial support from the Spanish projects ACPHIN (ref. FIS2009-10150) and TAPHOR (MAT2012-31392). J.G.-B. and D.P. acknowledges funding from the Spanish government through the Juan de la Cierva programme, D. N.-U. acknowledges funding from the Catalan government through the Beatriu de Pinos programme. We thank Juan Sierra for his valuable technical advice. We thank the ICN2's electron microscopy division and M. Sledzinska for the assistance with the SEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Band Gaps and Waveguiding in Phoxonic Silicon Crystal Slabs

  • Pennec, Y.
  • Rouhani, B. Djafari
  • El Boudouti, E. H.
  • Li, C.
  • El Hassouani, Y.
  • Vasseur, J. O.
  • Papanikolaou, N.
  • Benchabane, S.
  • Laude, V.
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We discuss the simultaneous existence of phoxonic, i.e., phononic and photonic, band gaps in a periodic array of holes drilled in a Si membrane. We investigate in detail both the square and the honeycomb lattices. We show that complete phoxonic band gaps can be obtained with the honeycomb lattice. Otherwise, both structures present the possibility of a complete phononic gap together with a photonic band gap of a given symmetry, odd or even, depending on the geometrical parameters. We show the possibility of confinement of both acoustic and optical waves in a waveguide created inside the honeycomb structure., This work is supported by the European Commission Seventh Framework programs (FP7) under the FET-Open project TAILPHOX No 233833.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical gain by simultaneous photon and phonon confinement in indirect bandgap semiconductor acousto-optical cavities

  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optical gain that could ultimately lead to light emission from silicon is a goal that has been pursued for a long time by the scientific community. The reason is that a silicon laser would allow for the development of low-cost, high-volume monolithic photonic integrated circuits created using conventional CMOS technologies. However, the silicon indirect bandgap-requiring the participation of a proper phonon in the process of light emission-is a roadblock that has not been overcome so far. A high-Q optical cavity allowing a very high density of states at the desired frequencies has been proposed as a possible way to get optical gain. However, recent theoretical studies have shown that the free-carrier absorption is much higher than the optical gain at ambient temperature in an indirect bandgap semiconductor, even if a high-Q optical cavity is formed. In this work, we consider a particular case in which the semiconductor material is engineered to form an acousto-optical cavity where the photon and phonon modes involved in the emission process are simultaneously confined. The acousto-optical cavity confinement effect on the light emission properties is characterized by a compound Purcell factor which includes both the optical as well as the acoustic Purcell factor (APF). A theoretical expression for the APF is also introduced. Our theoretical results suggest that creating an acousto-optical cavity the optical gain can overcome the photon loss due to free carriers as a consequence of the localization of phonons even at room temperature, paving the way towards the pursued silicon laser., This research has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement number 233883 (TAILPHOX).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical and mechanical mode tuning in an optomechanical crystal with light-induced thermal effects

  • Navarro-Urrios, D.
  • Gomis-Bresco, J.
  • Capuj, N. E.
  • Alzina, F.
  • Griol Barres, Amadeu
  • Puerto Garcia, Daniel
  • Sotomayor-Torres, C. M.
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We report on the modification of the optical and mechanical properties of a silicon 1D optomechanical crystal cavity due to thermo-optic effects in a high phonon/photon population regime. The cavity heats up due to light absorption in a way that shifts the optical modes towards longer wavelengths and the mechanical modes to lower frequencies. By combining the experimental optical results with finite-difference time-domain simulations, we establish a direct relation between the observed wavelength drift and the actual effective temperature increase of the cavity. By assuming that the Young's modulus decreases accordingly to the temperature increase, we find a good agreement between the mechanical mode drift predicted using a finite element method and the experimental one., This work was supported by the EU through the project TAILPHOX (ICT-FP7-233883) and the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish projects TAPHOR (MAT2012-31392). The authors thank A. Tredicucci for a critical reading of the manuscript and A. Pitanti for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Honeycomb Photonic Crystal Waveguides in a Suspended Silicon Slab

  • Puerto Garcia, Daniel
  • Escalante Fernández, José María
  • Pennec, Yan
  • Djafari-Rouhani, Bahram
  • Beugnot, Jean-Charles
  • Laude, Vincent
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We report experimental evidence of light guiding at telecommunication wavelengths along line-defect honeycomb-lattice photonic crystal waveguides created in suspended silicon slabs. Numerical results show that the guided bands correspond to modes below the cladding light line so they are inherently lossless, although the measurements show quite high losses owing to fabrication imperfections. Honeycomb photonic crystals are a suitable platform for confining light and sound in nanoscale waveguides. © 1989-2012 IEEE., This work was supported by the EC Seventh Framework Programme (FP7/2007-2013) under Grant 233883 (TAILPHOX).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of loss on the dispersion relation of photonic and phononic crystals

  • Laude, Vincent
  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] A theoretical analysis is made of the transformation of the dispersion relation of waves in artificial crystals under the influence of loss, including the case of photonic and phononic crystals. Considering a general dispersion relation in implicit form, an analytic procedure is derived to obtain the transformed dispersion relation. It is shown that the dispersion relation is generally shifted in the complex (k,ω) plane, with k the wave number and ω the angular frequency. The value of the shift is obtained explicitly as a function of the perturbation of material constants accounting for loss. The method is shown to predict correctly the transformation of the complex band structure k(ω). Several models of the dispersion relation near a symmetry point of the Brillouin zone are analyzed. A lower bound for the group velocity, related to the local shape of the band around symmetry points, is derived for each case, Financial support from the European Community's Seventh Framework program (FP7/2007-2013) under Grant Agreement No. 233883 (TAILPHOX) is gratefully acknowledged. V. L. acknowledges the support of the Labex ACTION program (Contract No. ANR-11-LABX-01-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanic interaction in a corrugated phoxonic nanobeam cavity

  • Oudich, Mourad
  • El-Jalla, Said
  • Pennec, Yan
  • Djafari-Rouhani, Bahram
  • Gomis Bresco, Jordi
  • Navarro-Urrios, Daniel
  • Sotomayor Torres, Clivia M.
  • Makhoute, Abdelkader
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The interaction between phonons and photons is investigated theoretically in a phoxonic cavity inside a corrugated nanobeam waveguide presenting band gaps for both electromagnetic and elastic waves. The structure is made by drilling periodic holes on a silicon nanobeam with lateral periodic stubs and the tapered cavity is constructed by changing gradually the geometrical parameters of both the holes and stubs. We show that this kind of cavity displays localized phonons and photons inside the gaps, which can enhance their interaction and also promotes the presence of many optical confined modes with high quality factor. Using the finite-element method, we demonstrate that with appropriate design of the tapering construction, one can control the cavity modes frequency without altering significantly the quality factor of the photonic modes. By changing the tapering rates over the lattice constants, we establish the possibility of shifting the phononic cavity modes frequency to place them inside the desired gap, which enhances their confinement and increases the mechanical quality factor while keeping the strength of the optomechanic coupling high. In our calculations, we take account of both mechanisms that contribute to the acousto-optic interaction, namely photoelastic and interface motion effects. We show that in our case, these two effects can contribute additively to give high coupling strength between phononic and photonic cavity modes. The calculations of the coupling coefficient which gives the phonon-photon coupling strength give values as high as 2 MHz while photonic cavity modes display quality factor of 105 and even values up to 3.4 MHz but with smaller photonic quality factors., The authors acknowledge the support of the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX N 233883.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical study about the relations among coefficients of stimulated emission, spontaneous emission and absorption in indirect bandgap semiconductor

  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We show a theoretical study that permits us to obtain the relationship between the coefficients of stimulated emission, spontaneous emission and absorption in indirect bandgap semiconductors, including multiphoton and multiphonon processes. (c) 2012 Elsevier B.V. All rights reserved., Financial support by FET-Open Project TAILPHOX (Grant no. 233883) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A self-stabilized coherent phonon source driven by optical forces

  • Navarro Urríos, Daniel
  • Capuj, N. E.
  • Gomis-Bresco, J.
  • Alzina, F.
  • Pitanti, A.
  • Sotomayor Torres, C. M.
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We report a novel injection scheme that allows for phonon lasing in a one-dimensional optomechanical photonic crystal, in a sideband unresolved regime and with cooperativity values as low as 10-2. It extracts energy from a cw infrared laser source and is based on the triggering of a thermooptical/free-carrier-dispersion self-pulsing limit-cycle, which anharmonically modulates the radiation pressure force. The large amplitude of the coherent mechanical motion acts as a feedback that stabilizes and entrains the self-pulsing oscillations to simple fractions of the mechanical frequency. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122 MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon platform, which enables its exploitation in sensing, intra-chip metrology or time-keeping applications., This work was supported by the European Comission project TAILPHOX (ICT-FP7-233883), the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish MINECO project TAPHOR (MAT2012-31392). The authors sincerely thank B. Djafari-Rouhani, Y. Pennec and M. Oudich for the design of the OM photonic crystal, A. Trifonova, S. Valenzuela and E. Weig for a critical reading of the manuscript and A. Tredicucci for fruitful discussions. A. M and A. G thank L. Bellieres and N. Sanchez-Losilla for their contributions in the OM photonic crystal etching processes. DNU and JGB gratefully acknowledge the support of a Beatriu de Pinos and a Juan de la Cierva postdoctoral fellowship, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical study about the gain in indirect bandgap semiconductor optical cavities

  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Indirect bandgap semiconductors such as silicon are not efficient light emitters because a phonon with a high momentum is required to transfer an electron from the conduction to the valence band. In a recent study (M.J. Chen et al., 2006) [6] an analytical expression of the optical gain in bulk indirect bandgap semiconductors was obtained. The main conclusion was that the free-carrier absorption was much higher than the optical gain at ambient temperature, which prevents lasing. In this work, we consider the case in which the semiconductor material is engineered to form an optical cavity characterized by a certain Purcell factor. We conclude that although the optical gain is increased, losses due to free carriers increase in the same way so lasing is also prevented even when creating a high-Q optical cavity. © 2012 Elsevier B.V. All rights reserved., This research has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement number 233883 (TAILPHOX). The authors wish to thank M.J. Chen for his useful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Demonstration of near infrared gas sensing using gold nanodisks on functionalized silicon

  • Rodríguez Cantó, Pedro Javier
  • Martínez Marco, Mª Luz
  • Rodríguez Fortuño, Francisco José
  • Tomás Navarro, Begoña
  • Ortuño Molinero, Rubén
  • Peransi Llopis, Sergio Manuel
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] In this work, we demonstrate experimentally the use of an array of gold nanodisks on functionalized silicon for chemosensing purposes. The metallic nanostructures are designed to display a very strong plasmonic resonance in the infrared regime, which results in highly sensitive sensing. Unlike usual experiments which are based on the functionalization of the metal surface, we functionalized here the silicon substrate. This silicon surface was modified chemically by buildup of an organosilane self-assembled monolayer (SAM) containing isocyanate as functional group. These groups allow for an easy surface regeneration by simple heating, thanks to the thermally reversible interaction isocyanate-analyte, which allows the cyclic use of the sensor. The technique showed a high sensitivity to surface binding events in gas and allowed the surface regeneration by heating of the sensor at 150°C. A relative wavelength shift ¿¿max/¿0 = 0.027 was obtained when the saturation level was reached. © 2011 Optical Society of America., Financial support by the Spanish MICINN under contracts CONSOLIDER EMET (CSD2008-00066) and TEC2008-06871-C02-02 and European Commission FP7 under the FET-Open project TAILPHOX 233833 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of optomechanical coupling in two-dimensional square lattice phoxonic crystal slab cavities

  • El-Jallal, Said
  • Oudich, Mourad
  • Pennec, Yan
  • Djafari-Rouhani, Bahram
  • Laude, Vincent
  • Beugnot, Jean-Charles
  • Escalante Fernández, José María
  • Makhoute, Abdelkader
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We theoretically investigate phonon-photon interaction in cavities created in a phoxonic crystal slab constituted by a two-dimensional (2D) square array of holes in a silicon membrane. The structure without defects provides 2D band gaps for both electromagnetic and elastic waves.We consider two types of cavities, namely, an L3 cavity (a row of three holes is removed) and a cross-shape cavity, which both possess highly confined phononic and photonic localized modes suitable for enhancing their interaction. In our theoretical study, we take into account two mechanisms that contribute to optomechanical interaction, namely, the photoelastic and the interface motion effects. We show that, depending on the considered pair of photonic and phononic modes, the two mechanisms can have similar or very different magnitudes, and their contributions can be either in or out of phase. We find out that only acoustic modes with a specific symmetry are allowed to couple with photonic cavity modes. The coupling strength is quantified by two different methods. In the first method, we compute a direct estimation of coupling rates by overlap integrals, while in the second one, we analyze the temporal modulation of the resonant photonic frequency by the phonon-induced acoustic vibrational motion during one acoustic period. Interestingly, we obtain high optomechanical interaction, with the coupling rate reaching more than 2.4 MHz for some specific phonon-photon pairs., The authors acknowledge the support of the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX N 233883.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dispersion relation of coupled-resonator acoustic waveguides formed by defect cavities in a phononic crystal

  • Escalante Fernández, José María
  • Laude, Vincent
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We investigate the dispersion of phononic crystal waveguides formed by evanescent coupling of a chain of defect cavities and supporting slow-wave propagation. These coupled-resonator acoustic waveguides (CRAWs) are analogous to the coupled-resonator optical waveguides formed in photonic crystals. CRAW dispersion can be controlled by increasing the distance between cavities, with the result of decreasing their coupling, and hence flattening the dispersion relation. Based on the tight-binding model, the dispersion relation is found in the form of a Fourier series expansion with explicitly given coefficients. This model is tested against the exact dispersion relation of a two-dimensional solid-solid phononic crystal of tungsten inclusions in a silicon matrix and only partial agreement is found. An alternative model of a linear chain of coupled resonators, resting only on the hypotheses of linearity and periodicity, is then proposed. While the Fourier coefficients in this model are a priori unspecified, they can be fitted against the exact dispersion relation, resulting in an excellent agreement with only a few terms in the Fourier series expansion. The Fourier coefficients are shown to be a direct measure of the coupling of neighbouring resonators., Financial support from the European Community's Seventh Framework program (FP7/2007-2013) under grant agreement number 233883 (TAILPHOX) is gratefully acknowledged. VL acknowledges the support of the Labex ACTION program (contract ANR-11-LABX-01-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamical back-action at 5.5 GHz in a corrugated optomechanical beam

  • Navarro-Urrios, D.
  • Gomis-Bresco, J.
  • El-Jallal, S.
  • Oudich, M.
  • Pitanti, A.
  • Capuj, N.
  • Tredicucci, A.
  • Alzina, F.
  • Pennec, Y.
  • Djafari-Rouhani, B.
  • Sotomayor Torres, C.M.
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We report on the optomechanical properties of a breathing mechanical mode oscillating at 5.5 GHz in a 1D corrugated Si nanobeam. This mode has an experimental single-particle optomechanical coupling rate of vertical bar g(o, OM)vertical bar= 1.8 MHz (vertical bar g(o, OM)vertical bar/2 pi=0.3 MHz) and shows strong dynamical back-action effects at room temperature. The geometrical flexibility of the unit-cell would lend itself to further engineering of the cavity region to localize the mode within the full phononic band-gap present at 4 GHz while keeping high go, OM values. This would lead to longer lifetimes at cryogenic temperatures, due to the suppression of acoustic leakage., This work was supported by the EU through the FP7 project TAILPHOX (ICT-FP7-233883) and the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish projects TAPHOR (MAT2012-31392). D.N-U and J.G-B acknowledge support in the form of postdoctoral fellowships from the Catalan (Beatriu de Pinos) and the Spanish (Juan de la Cierva) governments, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling light-sound interaction in nanoscale cavities and waveguides

  • Pennec, Yan
  • Laude, Vincent
  • Papanikolaou, Nikos
  • Djafari-Rouhani, Bahram
  • Oudich, Mourad
  • El-Jallal, Said
  • Beugnot, Jean Charles
  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The interaction of light and sound waves at the micro and nanoscale has attracted considerable interest in recent years. The main reason is that this interaction is responsible for a wide variety of intriguing physical phenomena, ranging from the laser-induced cooling of a micromechanical resonator down to its ground state to the management of the speed of guided light pulses by exciting sound waves. A common feature of all these phenomena is the feasibility to tightly confine photons and phonons of similar wavelengths in a very small volume. Amongst the different structures that enable such confinement, optomechanical or phoxonic crystals, which are periodic structures displaying forbidden frequency band gaps for light and sound waves, have revealed themselves as the most appropriate candidates to host nanoscale structures where the light-sound interaction can be boosted. In this review, we describe the theoretical tools that allow the modeling of the interaction between photons and acoustic phonons in nanoscale structures, namely cavities and waveguides, with special emphasis in phoxonic crystal structures. First, we start by summarizing the different optomechanical or phoxonic crystal structures proposed so far and discuss their main advantages and limitations. Then, we describe the different mechanisms that make light interact with sound, and show how to treat them from a theoretical point of view. We then illustrate the different photon-phonon interaction processes with numerical simulations in realistic phoxonic cavities and waveguides. Finally, we introduce some possible applications which can take enormous benefit from the enhanced interaction between light and sound at the nanoscale., We acknowledge funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement number 233883 (TAILPHOX)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous guidance of slow photons and slow acoustic phonons in silicon phoxonic crystal slabs

  • Laude, Vincent
  • Beugnot, J.C.
  • Benchabane, S.
  • Pennec, Y.
  • Djafari-Rouhani, B.
  • Papanikolaou, Nikos
  • Escalante Fernández, José María
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We demonstrate theoretically that photons and acoustic phonons can be simultaneously guided and slowed down in specially designed nanostructures. Phoxonic crystal waveguides presenting simultaneous phononic and photonic band gaps were designed in perforated silicon membranes that can be conveniently obtained using silicon-on-insulator technology. Geometrical parameters for simultaneous photonic and phononic band gaps were first chosen for optical wavelengths around 1550 nm, based on the finite element analysis of a perfect phoxonic crystal of circular holes. A plain core waveguide was then defined, and simultaneous slow light and elastic guided modes were identified for some waveguide width. Joint guidance of light and elastic waves is predicted with group velocities as low as c/25 and 180 m/s, respectively. © 2011 Optical Society of America., This research has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement number 233883 (TAILPHOX).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Phononic and photonic nanostructures

  • Sotomayor Torres, C. M.
Trabajo presentado a la Conferencia "BNC-b Research Meeting" celebrada en Barcelona el 14 de julio de 2011.-- et al., The Phononic and Photonic nanostructures (P2N) group investigates the interaction of photons, phonons and electrons in nanoscale condensed matter underpinn ed by research in nanofabrication and nanometrology. Its long term aim is to develop new information technology concepts where information processing is achieved with multiple state variables. The P2N group research on nanoscale thermal transport impacts thermal management in nanoelectronics. Similarly, the optical studies of acoustic effects in confined and phononic systems explores the limits of couple state-variables. The technology-oriented work on exciton-plasmon coupling printed polymer-based photonic structures targets enhanced light extraction from light sources, while the quest for novel nanometrology paves the way for future standards in nanotechnology. Finally. self- assembly research is oriented to pushing the limits of lithography while simultan eously enabling new functions for Beyond CMOS., The research carried out at the P2N is funded by the following projects: NANOPACK (FP7 grant agreement no. 216176); NanoICT (FP7 grant agreement no. 216165); NAPANIL (FP7 grant agreement no. 214249); TAILPHOX (FP7 grant agreement no. 233883); SEAL (FP7 grant agreement no. 257379); LAMAND (FP7 grant agreement no. 245565); NANOPOWER (FP7 grant agreement no. 256959); NANOFUNCTION (FP7 grant agreement no. 257375); NANO-TEC (FP7 grant agreement no. 257964); Collaboration project between CSIC and the University of Chile (MICINN contract no. 2008CL0046); Support to Emerging Groups by the Agencia de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya (AGAUR contract no. 2009 SGR 150); ACPHIN (MICINN contract no. FIS2009-10150); nanoTHERM (CONSOLIDER-Ingenio 2010, MICINN contract number CSD2010-00044); Juan de la Cierva programme - Towards a phonon source based on opto-mechanical crystals (MICINN contract number JCI-2010-06591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct measurement of room-temperature nondiffusive thermal transport over micron distances in a silicon membrane

  • Johnson, Jeremy A.
  • Maznev, A. A.
  • Cuffe, John
  • Eliason, Jeffrey K.
  • Minnich, Austin J.
  • Kehoe, Timothy
  • Sotomayor Torres, C. M.
  • Chen, Gang
  • Nelson, Keith A.
The >textbook> phonon mean free path of heat carrying phonons in silicon at room temperature is ~40 nm. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer mean free paths. We present a simple experiment demonstrating that room-temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorption of crossed laser pulses in a freestanding silicon membrane sets up a sinusoidal temperature profile that is monitored via diffraction of a probe laser beam. By changing the period of the thermal grating we vary the heat transport distance within the range ~1-10 ¿m. At small distances, we observe a reduction in the effective thermal conductivity indicating a transition from the diffusive to the ballistic transport regime for the low-frequency part of the phonon spectrum. © 2013 American Physical Society., This work was supported as part of the S3TEC Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Basic Energy Sciences under Award No. DE-SC0001299/DE-FG02-09ER46577 (experimental setup and data analysis). This work was also partially supported by projects NANOPOWER, Contract No. 256959; TAILPHOX, Contract No. 233883; NANOFUNCTION, Contract No. 257375; ACPHIN, Contract No. FIS2009-150; and AGAUR, 2009-SGR-150., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lifetimes of confined acoustic phonons in ultrathin silicon membranes

  • Cuffe, John
  • Chávez-Angel, Emigdio
  • Chapuis, Olivier
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
We study the relaxation of coherent acoustic phonon modes with frequencies up to 500 GHz in ultrathin free-standing silicon membranes. Using an ultrafast pump-probe technique of asynchronous optical sampling, we observe that the decay time of the first-order dilatational mode decreases significantly from ~4.7 ns to 5 ps with decreasing membrane thickness from ~194 to 8 nm. The experimental results are compared with theories considering both intrinsic phonon-phonon interactions and extrinsic surface roughness scattering including a wavelength-dependent specularity. Our results provide insight to understand some of the limits of nanomechanical resonators and thermal transport in nanostructures. © 2013 American Physical Society., The authors acknowledge financial support from the EU FP7 projects TAILPHOX (Grant No. 233883), NANOPOWER (Grant No. 256959), NANOPACK (Grant No. 216176), and NANOFUNCTION (Grant No. 257375); the Spanish MICINN projects ACPHIN (FIS2009-10150) and nanoTHERM (CSD2010-00044), the AGAUR 2009- SGR-150, the German Research Foundation (Grant No. DFG SFB767) and the Academy of Finland (Grant No. 252598). J. C. gratefully acknowledges support from the Irish Research Council for Science, Engineering and Technology (ICRSET) and E. C. gratefully acknowledges support from a Becas Chile 2010 CONICYT Fellowship from the Chilean government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A one-dimensional optomechanical crystal with a complete phononic band gap

  • Gomis-Bresco, J.
  • Navarro-Urrios, D.
  • Chávez-Angel, Emigdio
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
arXiv:1401.1691v2.-- et al., Recent years have witnessed the boom of cavity optomechanics, which exploits the confinement and coupling of optical and mechanical waves at the nanoscale. Among their physical implementations, optomechanical (OM) crystals built on semiconductor slabs enable the integration and manipulation of multiple OM elements in a single chip and provide gigahertz phonons suitable for coherent phonon manipulation. Different demonstrations of coupling of infrared photons and gigahertz phonons in cavities created by inserting defects on OM crystals have been performed. However, the considered structures do not show a complete phononic bandgap, which should enable longer lifetimes, as acoustic leakage is minimized. Here we demonstrate the excitation of acoustic modes in a one-dimensional OM crystal properly designed to display a full phononic bandgap for acoustic modes at 4 GHz. The modes inside the complete bandgap are designed to have high-mechanical Q-factors, limit clamping losses and be invariant to fabrication imperfections., This work was supported by the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX N 233883. J.G.-B., D.N.-U., E.C., F.A. and C.M.S.-T. acknowledge financial support from the Spanish projects ACPHIN (ref. FIS2009-10150) and TAPHOR (MAT2012-31392). J.G.-B. and D.P. acknowledges funding from the Spanish government through the Juan de la Cierva programme, D.N.- U. acknowledges funding from the Catalan government through the Beatriu de Pinos programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamical back-action at 5.5 GHz in a corrugated optomechanical beam

  • Navarro-Urrios, D.
  • Gomis-Bresco, J.
  • Capuj, Néstor E.
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
Under the terms of the Creative Commons Attribution (CC BY) license to their work.-- et al., We report on the optomechanical properties of a breathing mechanical mode oscillating at 5.5 GHz in a 1D corrugated Si nanobeam. This mode has an experimental single-particle optomechanical coupling rate of |g o, OM | = 1.8 MHz (|g o, OM |/2π = 0.3 MHz) and shows strong dynamical back-action effects at room temperature. The geometrical flexibility of the unit-cell would lend itself to further engineering of the cavity region to localize the mode within the full phononic band-gap present at 4 GHz while keeping high g o, OM values. This would lead to longer lifetimes at cryogenic temperatures, due to the suppression of acoustic leakage., This work was supported by the EU through the FP7 project TAILPHOX (ICT-FP7-233883) and the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish projects TAPHOR (MAT2012-31392). D.N-U and J.G-B acknowledge support in the form of postdoctoral fellowships from the Catalan (Beatriu de Pinòs) and the Spanish (Juan de la Cierva) governments, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical and mechanical mode tuning in an optomechanical crystal with light-induced thermal effects

  • Navarro-Urrios, D.
  • Gomis-Bresco, J.
  • Capuj, Néstor E.
  • Alzina, Francesc
  • Griol, Amadeu
  • Puerto, D.
  • Martínez, Alejandro
  • Sotomayor Torres, C. M.
Under the terms of the Creative Commons Attribution (CC BY) license to their work., We report on the modification of the optical and mechanical properties of a silicon 1D optomechanical crystal cavity due to thermo-optic effects in a high phonon/photon population regime. The cavity heats up due to light absorption in a way that shifts the optical modes towards longer wavelengths and the mechanical modes to lower frequencies. By combining the experimental optical results with finite-difference time-domain simulations, we establish a direct relation between the observed wavelength drift and the actual effective temperature increase of the cavity. By assuming that the Young's modulus decreases accordingly to the temperature increase, we find a good agreement between the mechanical mode drift predicted using a finite element method and the experimental one., This work was supported by the EU through the project TAILPHOX (ICT-FP7-233883) and the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish projects TAPHOR (MAT2012-31392)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optomechanic interaction in a corrugated phoxonic nanobeam cavity

  • Oudich, Mourad
  • Gomis-Bresco, J.
  • Navarro-Urrios, D.
  • Sotomayor Torres, C. M.
  • Martínez, Alejandro
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY).-- et al., The interaction between phonons and photons is investigated theoretically in a phoxonic cavity inside a corrugated nanobeam waveguide presenting band gaps for both electromagnetic and elastic waves. The structure is made by drilling periodic holes on a silicon nanobeam with lateral periodic stubs and the tapered cavity is constructed by changing gradually the geometrical parameters of both the holes and stubs. We show that this kind of cavity displays localized phonons and photons inside the gaps, which can enhance their interaction and also promotes the presence of many optical confined modes with high quality factor. Using the finite-element method, we demonstrate that with appropriate design of the tapering construction, one can control the cavity modes frequency without altering significantly the quality factor of the photonic modes. By changing the tapering rates over the lattice constants, we establish the possibility of shifting the phononic cavity modes frequency to place them inside the desired gap, which enhances their confinement and increases the mechanical quality factor while keeping the strength of the optomechanic coupling high. In our calculations, we take account of both mechanisms that contribute to the acousto-optic interaction, namely photoelastic and interface motion effects. We show that in our case, these two effects can contribute additively to give high coupling strength between phononic and photonic cavity modes. The calculations of the coupling coefficient which gives the phonon-photon coupling strength give values as high as 2 MHz while photonic cavity modes display quality factor of 105 and even values up to 3.4 MHz but with smaller photonic quality factors., The authors acknowledge the support of the European Commission Seventh Framework Programs (FP7) under the FET-Open project TAILPHOX N 233883., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro-Urrios, D.
  • Gomis-Bresco, J.
  • Alzina, Francesc
  • Capuj, Néstor E.
  • García Fernández, Pedro David
  • Colombano, Martin F.
  • Chávez-Angel, Emigdio
  • Sotomayor Torres, C. M.
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing., This work was supported by the European Comission project TAILPHOX (ICT-FP7-233883), the Spanish Severo Ochoa Excellence program and the MINECO project PHENTOM (FIS2015-70862-P). DNU and MFC gratefully acknowledge the support of a Ramón y Cajal postdoctoral fellowship and a Severo Ochoa studentship, respectivelyn., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Macroscopic and microscopic study of a CePdIn compound

  • Klicpera, M.
  • Javorský, P.
  • Puente-Orench, Inés
  • Hoser, A.
The magnetization and electrical resistivity measurements on a CePdIn single crystal as well as its preparation and structural characterization are presented. The negative paramagnetic Curie temperatures indicate antiferromagnetic ground state, the anisotropy of the paramagnetic Curie temperature amounts 22.7 K. No ferromagnetic correlations were indicated. Powder neutron diffraction experiment performed at temperatures down to 0.4 K did not lead to observation of any magnetic peak in diffraction patterns. We estimate the magnetic moment on Ce atoms to be significantly lower than 0.5-B. The temperature development of lattice parameters documents the standard thermal expansion of the unit cell; no signs of structural phase transition were observed., The most of experiments were performed in MLTL (//mltl.eu/), which is supported within the program of Czech Research Infrastructures (project no. LM2011025). The work was supported within the program of Large Infrastructures for Research, Experimental Development and Innovation (Project No. LM2015050) and research project LTT17019 financed by the Ministry of Education, Youth and Sports, Czech Republic. We would like to acknowledge Helmholz Zentrum Berlin. This research project has been supported by the 7th Framework Programme through the “Research infrastructures” action of the “Capacities” Programme, CP-CSA_INFRA-2011-1.1.17 Number 233883 NMI3 II., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro-Urrios, D.
  • Gomis-Bresco, Jordi
  • Alzina, F.
  • Capuj, N. E.
  • García, P. D.
  • Colombano, M. F.
  • Chavez-Angel, E.
  • Sotomayor-Torres, C. M.
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro Urios, D.
  • Gomis Bresco, Jordi|||0000-0002-6066-7064
  • Alzina, F.
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro-Urrios, D.
  • Gomis-Bresco, Jordi
  • Alzina, F.
  • Capuj, N. E.
  • García, P. D.
  • Colombano, M. F.
  • Chavez-Angel, E.
  • Sotomayor-Torres, C. M.
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro Urios, D.
  • Gomis Bresco, Jordi
  • Alzina, F.
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A self-stabilized coherent phonon source driven by optical forces

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Alzina, Francesc|||0000-0002-7082-0624
  • Pitanti, Alessandro|||0000-0002-7027-0300
  • Griol, Amadeu|||0000-0002-5428-5713
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
We report a novel injection scheme that allows for phonon lasing in a one-dimensional opto-mechanical photonic crystal, in a sideband unresolved regime and with cooperativity values as low as 10'2. It extracts energy from a cw infrared laser source and is based on the triggering of a thermo-optical/free-carrier-dispersion self-pulsing limit-cycle, which anharmonically modulates the radiation pressure force. The large amplitude of the coherent mechanical motion acts as a feedback that stabilizes and entrains the self-pulsing oscillations to simple fractions of the mechanical frequency. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon platform, which enables its exploitation in sensing, intra-chip metrology or time-keeping applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dynamical back-action at 5.5 GHz in a corrugated optomechanical beam

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • El-Jallal, Said
  • Oudich, Mourad
  • Pitanti, Alessandro|||0000-0002-7027-0300
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • Tredicucci, Alessadro
  • Alzina, Francesc|||0000-0002-7082-0624
  • Griol, Amadeu|||0000-0002-5428-5713
  • Pennec, Yan|||0000-0002-4719-9913
  • Djafari-Rouhani, Bahram|||0000-0001-6983-9689
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
We report on the optomechanical properties of a breathing mechanical mode oscillating at 5.5 GHz in a 1D corrugated Si nanobeam. This mode has an experimental single-particle optomechanical coupling rate of |g|=1.8 MHz (|g|/2π=0.3 MHz) and shows strong dynamical back-action effects at room temperature. The geometrical flexibility of the unit-cell would lend itself to further engineering of the cavity region to localize the mode within the full phononic band-gap present at 4 GHz while keeping high go, OM values. This would lead to longer lifetimes at cryogenic temperatures, due to the suppression of acoustic leakage.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-sustained coherent phonon generation in optomechanical cavities

  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Alzina, Francesc|||0000-0002-7082-0624
  • Capuj, Nestor Eduardo|||0000-0002-9042-2041
  • García Fernández, Pedro David|||0000-0002-3422-178X
  • Colombano Sosa, Martin|||0000-0002-2003-8597
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Optical forces can set tiny objects in states of mechanical self-sustained oscillation, spontaneously generating periodic signals by extracting power from steady sources. Miniaturized self-sustained coherent phonon sources are interesting for applications such as mass-force sensing, intra-chip metrology and intra-chip time-keeping among others. In this paper, we review several mechanisms and techniques that can drive a mechanical mode into the lasing regime by exploiting the radiation pressure force in optomechanical cavities, namely stimulated emission, dynamical back-action, forward stimulated Brillouin scattering and self-pulsing.