Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of synthesis conditions on properties of green-reduced graphene oxide

  • Pruna, A.
  • Pullini, D.
  • Busquets, D.
[EN] Green reduction of graphene oxide (GO) was performed using ascorbic acid (AA) in the presence of poly(sodium 4-styrenesulfonate), which resulted in reduced graphene oxide (PSS-rGO) with excellent solubility and stability in water. Large rGO sheets of 4 mu m(2) area and 1.1-nm thickness were obtained. The measurements showed that noncovalent functionalization with PSS molecules prevented rGO from aggregation. The parameters of graphite oxidation process and AA: GO w/w ratio were evaluated, and the obtained results showed that the properties of the reduced material (PSS-rGO) can be tailored by proper selection and adjustment of these parameters., The authors thank the European Commission for their financial support through the project no. NMP3-SL-2010-246073.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Polaron framework to account for transport properties in metallic epitaxial manganite films

  • Graziosi, Patrizio
  • Gambardella, A.
  • Prezioso, M.
  • Riminucci, A.
  • Bergenti, I.
  • Homonnay, N.
  • Schmidt, G.
  • Pullini, D.
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
[EN] We propose a model for the consistent interpretation of the transport behavior of manganese perovskites in both the metallic and insulating regimes. The concept of polarons as charge carriers in the metallic ferromagnetic phase of manganites also solves the conflict between transport models, which usually neglects polaron effects in the metallic phase, and, on the other hand, optical conductivity, angle-resolved spectroscopy, and neutron scattering measurements, which identify polarons in the metallic phase of manganites down to 6 K. Transport characterizations of epitaxial La0.7Sr0.3MnO3 thin films in the thickness range of 5-40 nm and temperature interval of 25-410 K have been accurately collected. We show that taking into account polaron effects allows us to achieve an excellent fit of the transport curves in the whole temperature range. The current carriers density collapse picture accurately accounts for the properties variation across the metal-insulator transitions. The electron-phonon coupling parameter gamma estimations are in a good agreement with theoretical predictions. The results promote a clear and straightforward quantitative description of the manganite films involved in charge transport device applications and promises to describe other oxide systems involving a metal-insulator transition., The authors P.G., A.G., M.P., A.R., and I.B. thank F. Bona for technical help and A. Dediu and V. Kabanov for fruitful discussions. Financial support from the FP7 Projects No. NMP3-LA-2010-246102 (Interfacing oxides, IFOX), No. NMP-2010-SMALL-4-263104 (Next generation hybrid interfaces for spintronic applications, HINTS), No. NMP3-SL-2010-246073 (Graphene for nanoscaled applications, GRENADA), and the Italian government FIRB (Molecular nanomagnets on metallic and magnetic surfaces for applications in molecular spintronics) Project No. RBAP117RWN is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pentacene thin films on ferromagnetic oxide: Growth mechanism and spintronic devices

  • Graziosi, Patrizio
  • Riminucci, A.
  • Prezioso, M.
  • Newby, C.
  • Brunel, Daniel
  • Bergenti, I.
  • Pullini, Daniele
  • Ghidini, M.
  • Dediu, V.A.
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
[EN] Cation-exchange membranes made exclusively from ceramic materials have been synthesized by means of the impregnation of microporous ceramic supports with zirconium phosphate. Changes in the pore size distribution and total pore volume of the supports were provoked by the addition of starch as pore former in the fabrication procedure. This allowed the production of supports with increased effective electrical conductivities and with larger pores available for the zirconium phosphate deposition. An improved functionality for the exchange of cations was given to the ceramic membranes by means of their impregnation with the active particles of zirconium phosphate. The ion-exchange properties of the membranes were increased with further impregnation cycles and the resulting current–voltage curves showed a similar shape to that typical of commercial polymeric ion-exchange membranes. The production of ionexchange membranes with increased chemical and radiation stability will broaden their applicability for the treatment of specific industrial waste waters, which are very aggressive for the current commercial ion-exchange membranes., The authors acknowledge the technical help from Federico Bona at CNR-ISMN in Bologna and the extensive use of the scanning probe microscopes at "Centro Interfacolta Misure" of the University of Parma. Financial support from the FP7 Projects NMP-2010-SMALL-4-263104 (HINTS), NMP3-SL-2010-246073 (GRENADA), and NMP3-LA-2010-246102 (IFOX) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Seed-free electrodeposition of ZnO bi-pods on electrophoretically-reduced graphene oxide for optoelectronic applications

  • Pruna, Alina Iuliana
  • Reyes Tolosa, María Dolores
  • Pullini, D.
  • Hernández Fenollosa, María de los Ángeles
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
[EN] Large areas of reduced graphene oxide (rGO) films were obtained by electrophoretic deposition onto insulating glass substrate. ZnO nanostructures were directly grown on the rGO films by single-step electrodeposition method. The properties of ZnO nanostructures were evaluated as a function of deposition mode onto rGO electrodes with different stoichiometry. Atomic force microscopy (AFM), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetrical analysis (TGA), transmission measurements, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were employed to characterize the obtained materials. Bi-pod morphology was observed for ZnO electrodeposited on rGO films by pulsed current elelctrodeposition. The obtained ZnO/rGO hybrid structures show high potential for highly transparent optoelectronic nanodevices., Financial support from Romanian Authority for Scientific Research-UEFISCDI (project no. PN-II-RU-PD-2012-3-0124) and European Commission (project no. NMP3-SL-2010-246073) is gratefully acknowledged. The authors also thank for the support given by the Microscopy Service and Institute of Chemical Technology (ITQ)-Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of combined chemical and electrochemical reduction of graphene oxide on morphology and structure of electrodeposited ZnO

  • Cembrero Cil, Jesús
  • Pruna, Alina Iuliana
  • Pullini, Daniele
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
This study reports a novel method of tailoring the properties of ZnO nanostructures by electrodeposition in presence of chemically-reduced graphene oxide (rGO). The coupled electrochemical and chemical reduction of graphene oxide resulted in few-layer graphene-based material. The presence of rGO in the electrolytic bath showed a marked influence on the morphology and structure of the hybrid nanostructures. The results indicated the presence of 5 mg L 1 rGO results in a 42.9% decrease in resistivity of the hybrid material with respect to the pure ZnO. The proposed approach shows very promising for the fabrication of transparent conductive oxide electrodes., Financial support is gratefully acknowledged from the European Commission (Project no. NMP3-SL-2010-246073) and Romanian Authority for Scientific Research - UEFISCDI (Project no. PN-II-RU-PD-2012-3-0124). The authors would like to thank the support given by the Microscopy Service and Institute of Chemical Technology (ITQ) from the Universidad Politecnica de Valencia (Spain).