Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Modelling laser milling of microcavities for the manufacturing of DES with ensembles

  • Santos González, Pedro
  • Teixidor, Daniel
  • Maudes Raedo, Jesús M.
  • Ciurana, Joaquim
A set of designed experiments, involving the use of a pulsed Nd:YAG laser system milling 316L Stainless Steel, serve to study the laser-milling process of microcavities in the manufacture of drug-eluting stents (DES). Diameter, depth, and volume error are considered to be optimized as functions of the process parameters, which include laser intensity, pulse frequency, and scanning speed. Two different DES shapes are studied that combine semispheres and cylinders. Process inputs and outputs are defined by considering the process parameters that can be changed under industrial conditions and the industrial requirements of this manufacturing process. In total, 162 different conditions are tested in a process that is modeled with the following state-of-the-art data-mining regression techniques: Support Vector Regression, Ensembles, Artificial Neural Networks, Linear Regression, and Nearest Neighbor Regression. Ensemble regression emerged as the most suitable technique for studying this industrial problem. Specifically, Iterated Bagging ensembles with unpruned model trees outperformed the other methods in the tests. This method can predict the geometrical dimensions of the machined microcavities with relative errors related to the main average value in the range of 3 to 23%, which are considered very accurate predictions, in view of the characteristics of this innovative industrial task., This work was partially funded through Grants fromthe IREBID Project (FP7-PEOPLE-2009-IRSES- 247476) of the European Commission and Projects TIN2011- 24046 and TECNIPLAD (DPI2009-09852) of the Spanish Ministry of Economy and Competitiveness
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermal model for curing implantable silicone in the moulding process applied to tracheal stents

  • Freitas, Matheus S.
  • Serenó, Lídia
  • Silveira, Zilda C.
  • Da Silva, Jorge Vicente Lopes
  • Ciurana, Quim de
Tracheal stents are a kind of endoprosthesis used to prevent tracheal obstruction due to different illnesses or disorders. Stent design has to fulfil several requirements such as the prevention of migration, easy removal if needed and radiopacity allowance. Although some commercial solutions can be found on the market, there is a constant demand for new designs in order to obtain more anatomical geometries and customized solutions. This study shows a numerical model developed to predict appropriate manufacturing of tracheal stents with implantable silicone by using a moulding process. In this study, tracheal stents have been manufactured using two manufacturing processes, namely heating plate and furnace systems. Both manufacturing processes yield equivalent mechanical properties but with a longer process time for the heating plate manufacturing system. Thermal images captured by a thermo-graphic camera during the heating process using an open plate system were compared with the numerical simulations for the equivalent process revealing inconsistencies in the thermal stabilization time. This inconsistent result could be related with FE modelling as non-acceptable element geometries (distortions and sizing), non-realistic input experiment parameters and/or standard parameters used by the FE software. Elimination by simulation trials showed the reason for this disparity as being a result of inappropriate thermal conductance between all the solid surfaces in contact with the model due to the use of the FE software standard set for conductance, which proved to be critical in this case. Corrections in thermal conductance were performed and the new FE numerical model applied in furnace system conditions was tested showing an experimentally coherent curing time of the silicone stents. The final results lead to a heating system that can produce flexible and customized products with a good prediction of the curing process, The authors gratefully appreciate the financial support from the Spanish Government (project DPI2009-09852). The research leading to the results has received funding from the European Union Seventh Framework Programme (FP7-PEOPLE-2009) under the grant agreement IRSES no 247476
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

  • Vázquez Lepe, Elisa
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
  • Thepsonthi, Thanongsak
  • Özel, Tuǧrul
Current technology trends in medical device industry calls for fabrication of massive arrays of microfeatures such as microchannels on to nonsilicon material substrates with high accuracy, superior precision, and high throughput. Microchannels are typical features used in medical devices for medication dosing into the human body, analyzing DNA arrays or cell cultures. In this study, the capabilities of machining systems for micro-end milling have been evaluated by conducting experiments, regression modeling, and response surface methodology. In machining experiments by using micromilling, arrays of microchannels are fabricated on aluminium and titanium plates, and the feature size and accuracy (width and depth) and surface roughness are measured. Multicriteria decision making for material and process parameters selection for desired accuracy is investigated by using particle swarm optimization (PSO) method, which is an evolutionary computation method inspired by genetic algorithms (GA). Appropriate regression models are utilized within the PSO and optimum selection of micromilling parameters; microchannel feature accuracy and surface roughness are performed. An analysis for optimal micromachining parameters in decision variable space is also conducted. This study demonstrates the advantages of evolutionary computing algorithms in micromilling decision making and process optimization investigations and can be expanded to other applications
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

  • Elías-Zúñiga, Alex
  • Baylon, Karen
  • Ferrer Real, Inés
  • Serenó, Lídia
  • Garcia-Romeu, Maria Luisa
  • Bagudanch Frigolé, Isabel
  • Grabalosa Saubí, Jordi
  • Perez Recio, Tania
  • Martínez-Romero, Oscar
  • Ortega-Lara, Wendy
In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Geometrical feature analysis of Co-Cr-Mo single tracks after selective laser melting processing

  • Monroy, Karla P.
  • Delgado Sanglas, Jordi
  • Serenó, Lídia
  • Ciurana, Quim de
  • Hendrichs, Nicolas J.
Purpose - Therefore, the purpose of this study is to understand the relationships between the processing parameters and the geometric form of the produced single tracks, in order to control dimensional quality in future experimentations. The quality of the deposited single track and layer is of prime importance in the selective laser melting (SLM) process, as it affects the product quality in terms of dimensional precision and product performance. Design/methodology/approach - In this paper, a vertical milling machining center equipped with an Ytterbium-fiber laser was used in the SLM experimentation to form single cobalt-chromium-molybdenum (CoCrMo) tracks. The different geometric features and the influence of the scanning parameters on these morphologic characteristics were studied statistically by means of ANOVA. Findings - Evidently, track height (h1) inaccuracy reduced in layer thicknesses between 100 and 200 μm. The re-melt depth (h2) was determined by the energy parameters, with laser power of 325-350 W and scanning speed (SS) of 66.6-83.3 mm/s being the most favorable parameters to obtain the required anchoring. Moreover, a contact angle of 117° was proposed as optimal, as it permitted an adequate overlapping region and a full densification, and, finally, an SS of 50 mm/s and a layer thickness of 250 were suggested for its development. Originality/value - The comprehension of the phenomena inherent to the process is related to the single track geometrical characteristics, which allow the definition of an optimal value for each factor for a further proposal of processing conditions that can finally derive a higher precision, wetting, density and mechanical properties, The authors gratefully appreciate the financial supports from the Spanish Government (project DPI2009-09852) and the European Union Seventh Framework Programme (FP7-PEOPLE-2009) under the grant agreement IRSES n° 247476 that lead to these research results
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Forming force and temperature effects on single point incremental forming of polyvinylchloride

  • Bagudanch Frigolé, Isabel
  • Garcia-Romeu, Maria Luisa
  • Centeno Báez, Gabriel
  • Elías-Zúñiga, Alex
  • Ciurana, Quim de
Incremental Sheet Forming (ISF) is a technology that allows producing highly customized products at a reasonable manufacturing cost, and Single point incremental forming (SPIF) is one of the simplest ISF processes. In this sense, recent research works have revealed an increasing interest in forming thermoplastic materials by ISF. The present paper focuses on determining the influence of the main process parameters, i.e. the step down, spindle speed, feed rate, tool diameter and sheet thickness, on the maximum forming force. Maximum depth has been analyzed as a formability indicator and surface roughness has been also addressed. The results show a significant effect of the spindle speed in the ISF process of polymeric materials, not only on the maximum forming force but also on its formability, by means of the maximum depth reached, and on the surface roughness achieved. This is a consequent of the triggered increment of temperature obtained due to the friction between the tool and the sheet blank, as far as temperature variation is supposed to be the main factor causing the variation of the mechanical properties of thermoplastic polymers. The material used in this research work was polyvinylchloride (PVC), which becomes rubber-like with the increase of temperature as a consequence of its viscoelastic behaviour, The research leading to these results has received funding from the Spanish Government, DPI2012-36042. The authors would like to thank the support from the International Research Exchange for Biomedical Devices Design and Prototyping (IREBID-FP7-PEOPLE-2009-IRSES-247476). The first author gratefully acknowledges the support from the Spanish Government grant FPU12/05402. The fourth author would like to acknowledge financial support of the grant number 61061 from Consejo Nacional de Ciencia y Tecnologia (Conacyt), Mexico
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V

  • Vázquez Lepe, Elisa
  • Gomar, Jéssica
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The aim of this work is to characterize the effect of cooling and lubrication conditions on micromilling of Ti6Al4V. This work is carried out by way of varying the cooling conditions in feed and against direction conditions in micro-channel manufacturing processes such as Dry machining, Jet application and Minimum Quantity Lubrication (MQL). Results are obtained by evaluating the performance of the lubrication conditions with respect to accuracy, surface quality, tool wear, burr formation and geometric shape. According to the experimental results, using MQL when micromilling Ti6Al4V to improve microchannel achieved dimensions, surface finish, and reduce the tool wear, has a significant effect on accuracy. Green machining concerns are related to sustainability and aim to reduce the use of cutting fluids thus using MQL in micromilling represents a significant reduction in cutting fluid consumption
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multiobjective Optimization of Laser Milling Parameters of Microcavities for the Manufacturing of DES

  • Teixidor Ezpeleta, Daniel
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
A multiobjective optimization of the laser milling process of microcavities for the manufacturing of drug eluting stents (DES) is presented. The diameter, depth, and volume error are considered to be optimized in function of the process parameters (scanning speed, laser intensity, and pulse frequency). Several experiments are carried out following a design of experiments in a nanosecond pulsed Nd:YAG laser machine on 316 L Stainless Steel as a work material. Two different geometries are studied, and they are considered as another variable for the model. The multiobjective optimization problem is solved by NSGA-II algorithm, and the nondominated Pareto-optimal fronts are obtained. The capability of the process to manufacture within a level of error is also investigated. Relative error capability maps for different scale of features are presented, This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Equivalent representation form of oscillators with elastic and damping nonlinear terms

  • Elías-Zúñiga, Alex
  • Olvera, Daniel
  • Ferrer Real, Inés
  • Martínez-Romero, Oscar
In this work we consider the nonlinear equivalent representation form of oscillators that exhibit nonlinearities in both the elastic and the damping terms. The nonlinear damping effects are considered to be described by fractional power velocity terms which provide better predictions of the dissipative effects observed in some physical systems. It is shown that their effects on the system dynamics response are equivalent to a shift in the coefficient of the linear damping term of a Duffing oscillator. Then, its numerical integration predictions, based on its equivalent representation form given by the well-known forced, damped Duffing equation, are compared to the numerical integration values of its original equations of motion. The applicability of the proposed procedure is evaluated by studying the dynamics response of four nonlinear oscillators that arise in some engineering applications such as nanoresonators, microresonators, human wrist movements, structural engineering design, and chain dynamics of polymeric materials at high extensibility, among others
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material

  • Ciurana, Quim de
  • Hernández, Luis W.
  • Delgado Sanglas, Jordi
Selective laser melting (SLM) is an advanced manufacturing technology based on layer by layer building to produce solid parts from metallic powder (Kruth et al., CIRP Ann Manuf Technol 56:730-760, 2007). Commercial SLM machines are configured to use specific parameters to process different metallic powder grades. This paper proposes a methodology that makes it possible to analyze the effect of energy density on the formation of single tracks from CoCrMo powder, using a noncommercial machine to select process parameters with open source technology. Full factorial experimental work was carried out to produce single tracks under different combinations of process parameters. A major application of this research work is to develop more flexible machine configurations applicable to different materials, This work was carried out, in part, with the support of grants from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modelling laser milling of microcavities for the manufacturing of DES with ensembles

  • Santos, Pedro Rosa
  • Teixidor Ezpeleta, Daniel
  • Maudes, Jesús M.
  • Ciurana, Quim de
A set of designed experiments, involving the use of a pulsed Nd:YAG laser system milling 316L Stainless Steel, serve to study the laser-milling process of microcavities in the manufacture of drug-eluting stents (DES). Diameter, depth, and volume error are considered to be optimized as functions of the process parameters, which include laser intensity, pulse frequency, and scanning speed. Two different DES shapes are studied that combine semispheres and cylinders. Process inputs and outputs are defined by considering the process parameters that can be changed under industrial conditions and the industrial requirements of this manufacturing process. In total, 162 different conditions are tested in a process that is modeled with the following state-of-the-art data-mining regression techniques: Support Vector Regression, Ensembles, Artificial Neural Networks, Linear Regression, and Nearest Neighbor Regression. Ensemble regression emerged as the most suitable technique for studying this industrial problem. Specifically, Iterated Bagging ensembles with unpruned model trees outperformed the other methods in the tests. This method can predict the geometrical dimensions of the machined microcavities with relative errors related to the main average value in the range of 3 to 23%, which are considered very accurate predictions, in view of the characteristics of this innovative industrial task, The authors would like to express their gratitude to the GREP research group at the University of Girona and the Tecnologico de Monterrey for access to their facilities during the experiments. This work was partially funded through Grants from the IREBID Project (FP7-PEOPLE-2009-IRSES-247476) of the European Commission and Projects TIN2011-24046 and TECNIPLAD (DPI2009-09852) of the Spanish Ministry of Economy and Competitiveness
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modeling pulsed laser micromachining of micro geometries using machine-learning techniques

  • Teixidor Ezpeleta, Daniel
  • Grzenda, Maciej
  • Bustillo Iglesias, Andrés
  • Ciurana, Quim de
A wide range of opportunities are emerging in the micro-system technology sector for laser micro-machining systems, because they are capable of processing various types of materials with micro-scale precision. However, few process datasets and machine-learning techniques are optimized for this industrial task. This study describes the process parameters of micro-laser milling and their influence on the final features of the microshapes that are produced. It also identifies the most accurate machine-learning technique for the modelization of this multivariable process. It examines the capabilities of laser micro-machining by performing experiments on hardened steel with a pulsed Nd:YAG laser. Arrays of micro-channels were manufactured using various scanning speeds, pulse intensities and pulse frequencies. The results are presented in terms of the main industrial requirements for any manufactured good: dimensional accuracy (in our case, depth and width of the channels), surface roughness and material removal rate (which is a measure of the productivity of the process). Different machine-learning techniques were then tested on the datasets to build highly accurate models for each output variable. The selected techniques were: k-Nearest Neighbours, neural networks, decision trees and linear regression models. Our analysis of the correlation coefficients and the mean absolute error of all the generated models show that neural networks are better at modelling channel depth and that decision trees are better at modelling material removal rate; both techniques were similar for width and surface roughness. In general, these two techniques show better accuracy than the other two models. The work concludes that decision trees should be used, if information on input parameter relations is sought, while neural networks are suitable when the dimensional accuracy of the workpiece is the main industrial requirement. Extensive datasets are necessary for this industrial task, to provide reliable AI models due to the high rates of noise, especially for some outputs such as roughness
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel

  • Teixidor Ezpeleta, Daniel
  • Ferrer Real, Inés
  • Ciurana, Quim de
  • Özel, Tuǧrul
This paper focuses on understanding the influence of laser milling process parameters on the final geometrical and surface quality of micro-channel features fabricated on AISI H13 steel. Optimal selection of process parameters is highly critical for successful material removal and high dimensional and surface quality for micro-sized die/mold applications. A set of designed experiments is carried out in a pulsed Nd:YAG laser milling system using AISI H13 hardened tool steel as work material. Arrays of micro-channels have been fabricated using a range of process parameters such as scanning speed (SS), pulse intensity (PI), and pulse frequency (PF). The relation between process parameters and quality characteristics has been studied with experimental modeling. Multi-criteria decision making for material and process parameter selection for desired surface quality and dimensional accuracy is investigated using an evolutionary computation method based on particle swarm optimization (PSO), The authors would like to express their gratitude to the GREP research group from the UdG, the MARL group at Rutgers University, and the ASCAMM Technology Center for the facilities provided during the experiments. This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effects of the Selective Laser Melting manufacturing process on the properties of CoCrMo single tracks

  • Monroy, Karla P.
  • Delgado Sanglas, Jordi
  • Serenó, Lídia
  • Ciurana, Quim de
  • Hendrichs, Nicolas J.
Selective Laser Melting (SLM) is an additive technology that produces solid parts by selectively melting thin layers of metallic powder. SLM can produce significant differences in the final properties due to the melting-consolidation phenomena of the process, which can be controlled by the appropriate parameters. Therefore, the objective of this study was to create a link between the process conditions and the resulting properties by experimenting in an own-developed SLM machine using CoCrMo powder as material. The fabricated samples were characterized by density, hardness and microstructural properties. The experimental results proved the capability of the SLM technique to build high dense samples. The hardness results gave evidence of a superior outcome compared to conventional processes. Finally, it was found that grain size was defined by scanning speed. Based on the results, a better understanding of the processing principles given by the parameters was achieved and improved fabrication quality was promoted, The authors gratefully appreciate the financial support from the European Union Seventh Framework Programme (FP7-PEOPLE-2009) under the IRSES n 247476 grant agreement, which led to these research results
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets

  • Teixidor Ezpeleta, Daniel
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The coronary stent fabrication requires a high-precision profile cut. Fibre lasers present a solution to accomplish these requirements. This paper presents an experimental study of fibre laser cutting of 316L stainless steel thin sheets. The effect of peak pulse power, pulse frequency and cutting speed on the cutting quality for fixed gas type and gas pressure was investigated. A mathematical model based on energy balances for the dross dimensions was formulated. The dross height and the dross diameter were analysed and compared with the experimental results. This allows adjustment of the process parameters to reduce the dimensions of the dross deposited at the bottom of the workpiece during laser cutting of thin sheets, The authors would like to express their gratitude to the GREP research group from the UdG and to the Tecnologico de Monterrey for the facilities provided during the experiments. This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Process planning considerations for micromilling of mould cavities used in ultrasonic moulding technology

  • Vázquez Lepe, Elisa
  • Amaro, Alan
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The current trend in miniaturization of products and components requires appropriate technologies for the manufacture of miniature dies and moulds. The work presented here deals with the process planning of micromilling for the production of miniature mould cavities, required in ultrasonic moulding in order to reach high precision. Several aspects of process planning are addressed, including cutting tool geometry selection, segmentation of cavity geometry, minimum chip thickness, chordal tolerance, and type of interpolation. The case study involves the successful micromilling of a complex aluminium mould cavity for ultrasonic moulding. The proposed process plan is demonstrated through the micromilling of the mould cavity and silicone replicas of the miniature geometrical model. In general terms, good precision is obtained following the proposed methodology. In a randomly located set of geometric features, the dimensional error was below 5% for most features (32 out of a total of 40), The authors would like to express their gratitude to the Product, Process and Production Engineering Research Group from University of Girona for the facilities provided during the experiments and all their valuable support. Tecnologico de Monterrey also provided support through its research group in Intelligent Machines. Also, this work was carried out with the collaboration of Ascamm Foundation through their spin-off ULTRASION S.L. This work was partially supported by European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

  • Delgado Sanglas, Jordi
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths

  • Teixidor Ezpeleta, Daniel
  • Orozco, Francisco
  • Thepsonthi, Thanongsak
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
  • Özel, Tuǧrul
his paper presents investigations on the effects of nanosecond laser processing parameters on depth and width of microchannels fabricated from polymethylmethacrylate (PMMA) polymer. A neodymium-doped yttrium aluminium garnet pulsed laser with a fundamental wavelength of 1,064 nm and a third harmonic wavelength of 355 nm with pulse duration of 5 ns is utilized. Hence, experiments are conducted at near-infrared (NIR) and ultraviolet (UV) wavelengths. The laser processing parameters of pulse energy (402-415 mJ at NIR and 35-73 mJ at UV wavelengths), pulse frequency (8-11 Hz), focal spot size (140-190 μm at NIR and 75 μm at UV wavelengths) and scanning rate (400-800 pulse/mm at NIR and 101-263 pulse/mm at UV wavelengths) are varied to obtain a wide range of fluence and processing rate. Microchannel width and depth profile are measured, and main effects plots are obtained to identify the effects of process parameters on channel geometry (width and depth) and material removal rate. The relationship between process variables (width and depth of laser-ablated microchannels) and process parameters is investigated. It is observed that channel width (140-430 μm at NIR and 100-150 μm at UV wavelengths) and depth (30-120 μm at NIR and 35-75 μm at UV wavelengths) decreased linearly with increasing fluence and increased non-linearly with increasing scanning rate. It is also observed that laser processing at UV wavelength provided more consistent channel profiles at lower fluences due to higher laser absorption of PMMA at this wavelength. Mathematical modeling for predicting microchannel profile was developed and validated with experimental results obtained with pulsed laser micromachining at NIR and UV wavelengths
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rapid tooling using 3D printing system for manufacturing of customized tracheal stent

  • Melgoza, Evila L.
  • Vallicrosa Massaguer, Guillem
  • Serenó, Lídia
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
Purpose - This work aims to present the design of a new continuous tool-path strategy for open-source low-cost fused deposition modeling (FDM) machines, such as Fab±Home or RepRap; and the development of an innovative integrated tool to design and fabricate customized tracheal stents with any FDM machine and six patient parameters. Both contributions were validated and implemented by obtaining a customized medical-grade silicone tracheal stent. Design/methodology/approach - For the design of the new deposition strategy, a Python programming language was used. The new tool-path strategy was proposed as a continuous path to avoid drops and gaps and to improve the accuracy of the final model. Meanwhile, patient parameters were obtained by medical doctors and introduced into the innovative integrated system. On the one hand, one mold generated automatically, and viewed with Matlab® software, was fabricated with a Fab±Home machine, optimized with the continuous tool-path strategy. On the other hand, the same generated mold was viewed in SolidWorks/Excel software and was fabricated using a commercial FDM machine. Finally, the mold was filled with medical grade silicone, and a silicone tracheal stent was obtained. Findings - Path planning for extrusion technologies is still a major concern, especially for open-source FDM machines. The results obtained in this work show the benefits of applying the newly developed continuous tool-path strategy to optimize the performance and efficiency of these machines. In addition, the proposed innovative integrated system allows the fabrication of customized tracheal stents rapidly and affordably. Practical implications - The possibility of obtaining customized tracheal stents is a worthy challenge. Medical doctors could play a more active role and interact during the design process, helping to obtain more suitable stents. The method proposed herein would provide the opportunity to obtain real values from the trachea of a patient in the operating room and quickly fabricate a customized stent that would fit the patient's trachea perfectly. Originality/value - The results obtained in this work are relevant and have future applications in both the medical and the additive manufacturing fields. The optimized tool-path strategy can help to improve and enhance the use of low-cost FDM machines. Moreover, the innovative automatic design approach to fabricate tracheal stents may open new market opportunities in the medical device field
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An integrated parameterized tool for designing a customized tracheal stent

  • Melgoza, Evila L.
  • Serenó, Lídia
  • Rosell, Antoni
  • Ciurana, Quim de
The design of customized biomedical devices is certainly relevant nowadays, and to achieve higher implantation accuracy, custom made implants need to be developed. The aim of this work is to present an integrated tool for the design of a tracheal stent to meet the most important requirements or needs of physicians, hospital administrators and patients. The methodology is based on the synergy between several methods such as attribute listing, quality function deployment (QFD), and the theory of inventive problem solving (TRIZ), for solving physical contradictions related to geometry and material. The result is a stent shape approved by physicians. Moreover, a parameterization tool was used to modify the stent’s general dimensions to fit a specific patient. Lastly, the final conceptual design was printed using an additive manufacturing technology known as Fab@Home, This work was carried out with the support of a grant from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluation of machine-tool motion accuracy using a CNC machining center in micro-milling processes

  • Vázquez Lepe, Elisa
  • Gomar, Jéssica
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The demand for micro holes, micro-molds, and micro forms continues to grow as high-tech industries demand miniaturized products. Sectors such as aerospace, microelectronics, medicine, and even the automotive sector, are just some examples of enterprises that are taking advantage of micro-manufacturing technologies. Within this framework, the need to adapt the knowledge of macro-scale manufacturing processes to micro-scale is evident. This paper provides the insight needed to improve milling as a micro-manufacturing process. The goal is to characterize motion system to reduce error and improve accuracy with different process parameters on final shape for micro-parts while standard milling machine with linear motor and servomotor is used. Geometrical error and accuracy caused by motion control and control software error sources is evaluated and analyzed. Results will help decision on process parameters and it verifies that standard milling machine is useful to produce micro-parts. The work is carried out by theoretical principles and experimental work, the machine-tool motion accuracy of a medium machining center specializing in the micro-milling of elliptical cavities on aluminum workpieces. Measurements were taken to evaluate deviations and/or errors in geometric accuracy and the geometric quality errors caused by motion control and control software. The results show that due to the structure and inertia of the machine tool, acceleration and deceleration do indeed affect the accuracy and quality of the micro-part. Furthermore, errors from motion control and/or control software are present because differences in the moving carriages create instabilities, The authors would like to express their gratitude to the Product, Process and Production Engineering Research Group from the University of Girona for the facilities provided during the experiments and for all their valuable support. This work was partially carried out with the support of the grant from the European Commission project IREBID (FP7- PEOPLE-2009-IRSES-247476)