Skip to main content

CARACTERIZACION DE TECNOLOGIAS INNOVADORAS PARA LA PLANIFICACION DETALLADA DE PROCESOS

DPI2009-09852

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Modelling laser milling of microcavities for the manufacturing of DES with ensembles

  • Santos González, Pedro
  • Teixidor, Daniel
  • Maudes Raedo, Jesús M.
  • Ciurana, Joaquim
A set of designed experiments, involving the use of a pulsed Nd:YAG laser system milling 316L Stainless Steel, serve to study the laser-milling process of microcavities in the manufacture of drug-eluting stents (DES). Diameter, depth, and volume error are considered to be optimized as functions of the process parameters, which include laser intensity, pulse frequency, and scanning speed. Two different DES shapes are studied that combine semispheres and cylinders. Process inputs and outputs are defined by considering the process parameters that can be changed under industrial conditions and the industrial requirements of this manufacturing process. In total, 162 different conditions are tested in a process that is modeled with the following state-of-the-art data-mining regression techniques: Support Vector Regression, Ensembles, Artificial Neural Networks, Linear Regression, and Nearest Neighbor Regression. Ensemble regression emerged as the most suitable technique for studying this industrial problem. Specifically, Iterated Bagging ensembles with unpruned model trees outperformed the other methods in the tests. This method can predict the geometrical dimensions of the machined microcavities with relative errors related to the main average value in the range of 3 to 23%, which are considered very accurate predictions, in view of the characteristics of this innovative industrial task., This work was partially funded through Grants fromthe IREBID Project (FP7-PEOPLE-2009-IRSES- 247476) of the European Commission and Projects TIN2011- 24046 and TECNIPLAD (DPI2009-09852) of the Spanish Ministry of Economy and Competitiveness
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermal model for curing implantable silicone in the moulding process applied to tracheal stents

  • Freitas, Matheus S.
  • Serenó, Lídia
  • Silveira, Zilda C.
  • Da Silva, Jorge Vicente Lopes
  • Ciurana, Quim de
Tracheal stents are a kind of endoprosthesis used to prevent tracheal obstruction due to different illnesses or disorders. Stent design has to fulfil several requirements such as the prevention of migration, easy removal if needed and radiopacity allowance. Although some commercial solutions can be found on the market, there is a constant demand for new designs in order to obtain more anatomical geometries and customized solutions. This study shows a numerical model developed to predict appropriate manufacturing of tracheal stents with implantable silicone by using a moulding process. In this study, tracheal stents have been manufactured using two manufacturing processes, namely heating plate and furnace systems. Both manufacturing processes yield equivalent mechanical properties but with a longer process time for the heating plate manufacturing system. Thermal images captured by a thermo-graphic camera during the heating process using an open plate system were compared with the numerical simulations for the equivalent process revealing inconsistencies in the thermal stabilization time. This inconsistent result could be related with FE modelling as non-acceptable element geometries (distortions and sizing), non-realistic input experiment parameters and/or standard parameters used by the FE software. Elimination by simulation trials showed the reason for this disparity as being a result of inappropriate thermal conductance between all the solid surfaces in contact with the model due to the use of the FE software standard set for conductance, which proved to be critical in this case. Corrections in thermal conductance were performed and the new FE numerical model applied in furnace system conditions was tested showing an experimentally coherent curing time of the silicone stents. The final results lead to a heating system that can produce flexible and customized products with a good prediction of the curing process, The authors gratefully appreciate the financial support from the Spanish Government (project DPI2009-09852). The research leading to the results has received funding from the European Union Seventh Framework Programme (FP7-PEOPLE-2009) under the grant agreement IRSES no 247476
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Geometrical feature analysis of Co-Cr-Mo single tracks after selective laser melting processing

  • Monroy, Karla P.
  • Delgado Sanglas, Jordi
  • Serenó, Lídia
  • Ciurana, Quim de
  • Hendrichs, Nicolas J.
Purpose - Therefore, the purpose of this study is to understand the relationships between the processing parameters and the geometric form of the produced single tracks, in order to control dimensional quality in future experimentations. The quality of the deposited single track and layer is of prime importance in the selective laser melting (SLM) process, as it affects the product quality in terms of dimensional precision and product performance. Design/methodology/approach - In this paper, a vertical milling machining center equipped with an Ytterbium-fiber laser was used in the SLM experimentation to form single cobalt-chromium-molybdenum (CoCrMo) tracks. The different geometric features and the influence of the scanning parameters on these morphologic characteristics were studied statistically by means of ANOVA. Findings - Evidently, track height (h1) inaccuracy reduced in layer thicknesses between 100 and 200 μm. The re-melt depth (h2) was determined by the energy parameters, with laser power of 325-350 W and scanning speed (SS) of 66.6-83.3 mm/s being the most favorable parameters to obtain the required anchoring. Moreover, a contact angle of 117° was proposed as optimal, as it permitted an adequate overlapping region and a full densification, and, finally, an SS of 50 mm/s and a layer thickness of 250 were suggested for its development. Originality/value - The comprehension of the phenomena inherent to the process is related to the single track geometrical characteristics, which allow the definition of an optimal value for each factor for a further proposal of processing conditions that can finally derive a higher precision, wetting, density and mechanical properties, The authors gratefully appreciate the financial supports from the Spanish Government (project DPI2009-09852) and the European Union Seventh Framework Programme (FP7-PEOPLE-2009) under the grant agreement IRSES n° 247476 that lead to these research results
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multiobjective Optimization of Laser Milling Parameters of Microcavities for the Manufacturing of DES

  • Teixidor Ezpeleta, Daniel
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
A multiobjective optimization of the laser milling process of microcavities for the manufacturing of drug eluting stents (DES) is presented. The diameter, depth, and volume error are considered to be optimized in function of the process parameters (scanning speed, laser intensity, and pulse frequency). Several experiments are carried out following a design of experiments in a nanosecond pulsed Nd:YAG laser machine on 316 L Stainless Steel as a work material. Two different geometries are studied, and they are considered as another variable for the model. The multiobjective optimization problem is solved by NSGA-II algorithm, and the nondominated Pareto-optimal fronts are obtained. The capability of the process to manufacture within a level of error is also investigated. Relative error capability maps for different scale of features are presented, This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The effect of process parameters on the energy consumption in Single Point Incremental Forming

  • Bagudanch Frigolé, Isabel
  • Garcia-Romeu, Maria Luisa
  • Ferrer Mallorquí, Inès
  • Lupiañez Justribó, Jordi
Recently, environmental and sustainability concerns have gathered considerable attention in the academic world. Some contributions have been made in this field, but for manufacturing processes, and specially for forming processes this concern has just begun. For this reason, in the present work the influence of the variation of several process parameters in Single Point Incremental Sheet forming has been carried out. Thus, a campaign of experiments with its corresponding statistical analysis has been done. The calculation of CO2emissions for the ISF-formed part, under the Spanish framework, has been also carried out. Spindle speed variation is the most significant parameter, followed by the material and incremental step. From results, an improvement of the combination of process parameters in order to minimize energy consumption will be possible, The research leading to these results has received funding from the Spanish government, DPI2009-09852
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material

  • Ciurana, Quim de
  • Hernández, Luis W.
  • Delgado Sanglas, Jordi
Selective laser melting (SLM) is an advanced manufacturing technology based on layer by layer building to produce solid parts from metallic powder (Kruth et al., CIRP Ann Manuf Technol 56:730-760, 2007). Commercial SLM machines are configured to use specific parameters to process different metallic powder grades. This paper proposes a methodology that makes it possible to analyze the effect of energy density on the formation of single tracks from CoCrMo powder, using a noncommercial machine to select process parameters with open source technology. Full factorial experimental work was carried out to produce single tracks under different combinations of process parameters. A major application of this research work is to develop more flexible machine configurations applicable to different materials, This work was carried out, in part, with the support of grants from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Modelling laser milling of microcavities for the manufacturing of DES with ensembles

  • Santos, Pedro Rosa
  • Teixidor Ezpeleta, Daniel
  • Maudes, Jesús M.
  • Ciurana, Quim de
A set of designed experiments, involving the use of a pulsed Nd:YAG laser system milling 316L Stainless Steel, serve to study the laser-milling process of microcavities in the manufacture of drug-eluting stents (DES). Diameter, depth, and volume error are considered to be optimized as functions of the process parameters, which include laser intensity, pulse frequency, and scanning speed. Two different DES shapes are studied that combine semispheres and cylinders. Process inputs and outputs are defined by considering the process parameters that can be changed under industrial conditions and the industrial requirements of this manufacturing process. In total, 162 different conditions are tested in a process that is modeled with the following state-of-the-art data-mining regression techniques: Support Vector Regression, Ensembles, Artificial Neural Networks, Linear Regression, and Nearest Neighbor Regression. Ensemble regression emerged as the most suitable technique for studying this industrial problem. Specifically, Iterated Bagging ensembles with unpruned model trees outperformed the other methods in the tests. This method can predict the geometrical dimensions of the machined microcavities with relative errors related to the main average value in the range of 3 to 23%, which are considered very accurate predictions, in view of the characteristics of this innovative industrial task, The authors would like to express their gratitude to the GREP research group at the University of Girona and the Tecnologico de Monterrey for access to their facilities during the experiments. This work was partially funded through Grants from the IREBID Project (FP7-PEOPLE-2009-IRSES-247476) of the European Commission and Projects TIN2011-24046 and TECNIPLAD (DPI2009-09852) of the Spanish Ministry of Economy and Competitiveness
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel

  • Teixidor Ezpeleta, Daniel
  • Ferrer Real, Inés
  • Ciurana, Quim de
  • Özel, Tuǧrul
This paper focuses on understanding the influence of laser milling process parameters on the final geometrical and surface quality of micro-channel features fabricated on AISI H13 steel. Optimal selection of process parameters is highly critical for successful material removal and high dimensional and surface quality for micro-sized die/mold applications. A set of designed experiments is carried out in a pulsed Nd:YAG laser milling system using AISI H13 hardened tool steel as work material. Arrays of micro-channels have been fabricated using a range of process parameters such as scanning speed (SS), pulse intensity (PI), and pulse frequency (PF). The relation between process parameters and quality characteristics has been studied with experimental modeling. Multi-criteria decision making for material and process parameter selection for desired surface quality and dimensional accuracy is investigated using an evolutionary computation method based on particle swarm optimization (PSO), The authors would like to express their gratitude to the GREP research group from the UdG, the MARL group at Rutgers University, and the ASCAMM Technology Center for the facilities provided during the experiments. This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets

  • Teixidor Ezpeleta, Daniel
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The coronary stent fabrication requires a high-precision profile cut. Fibre lasers present a solution to accomplish these requirements. This paper presents an experimental study of fibre laser cutting of 316L stainless steel thin sheets. The effect of peak pulse power, pulse frequency and cutting speed on the cutting quality for fixed gas type and gas pressure was investigated. A mathematical model based on energy balances for the dross dimensions was formulated. The dross height and the dross diameter were analysed and compared with the experimental results. This allows adjustment of the process parameters to reduce the dimensions of the dross deposited at the bottom of the workpiece during laser cutting of thin sheets, The authors would like to express their gratitude to the GREP research group from the UdG and to the Tecnologico de Monterrey for the facilities provided during the experiments. This work was partially carried out with the grant supports from the European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Spanish Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Process planning considerations for micromilling of mould cavities used in ultrasonic moulding technology

  • Vázquez Lepe, Elisa
  • Amaro, Alan
  • Ciurana, Quim de
  • Rodríguez González, Ciro Ángel
The current trend in miniaturization of products and components requires appropriate technologies for the manufacture of miniature dies and moulds. The work presented here deals with the process planning of micromilling for the production of miniature mould cavities, required in ultrasonic moulding in order to reach high precision. Several aspects of process planning are addressed, including cutting tool geometry selection, segmentation of cavity geometry, minimum chip thickness, chordal tolerance, and type of interpolation. The case study involves the successful micromilling of a complex aluminium mould cavity for ultrasonic moulding. The proposed process plan is demonstrated through the micromilling of the mould cavity and silicone replicas of the miniature geometrical model. In general terms, good precision is obtained following the proposed methodology. In a randomly located set of geometric features, the dimensional error was below 5% for most features (32 out of a total of 40), The authors would like to express their gratitude to the Product, Process and Production Engineering Research Group from University of Girona for the facilities provided during the experiments and all their valuable support. Tecnologico de Monterrey also provided support through its research group in Intelligent Machines. Also, this work was carried out with the collaboration of Ascamm Foundation through their spin-off ULTRASION S.L. This work was partially supported by European Commission project IREBID (FP7-PEOPLE-2009-IRSES-247476) and the Science and Innovation Minister project TECNIPLAD (DPI2009-09852)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Forming force in Single Point Incremental Forming under different bending conditions

  • Bagudanch Frigolé, Isabel
  • Centeno Báez, Gabriel
  • Vallellano, Carpóforo
  • Garcia-Romeu, Maria Luisa
Estimation of incremental sheet forming force is required in order to design dedicated equipment, utilize adapted machinery or develop online process control strategies. In the present work, forces on Single Point Incremental Forming (SPIF) of variable wall angle geometry were studied under different bending conditions. The effect of several process parameters was analyzed. The results demonstrated that the maximum forming force increases with the tool diameter and the step down while for higher spindle speeds the forming force decreases. The last effect is due to the higher friction between the tool and the blank when using a fixed spindle speed, which causes an increase of the forming temperature. The forming force evolution, which varies with the bending conditions, could be used as an indicator to prevent the sheet failure, The research leading to these results has received funding from the Spanish government, DPI2009-09852