Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electron transport through dangling-bond silicon wires on H-passivated Si(100)

  • Kepenekian, M.
  • Novaes, Frederico D.
  • Robles, Roberto
  • Monturet, Serge
  • Joachim, Christian
  • Lorente, Nicolás
arXiv:1206.2154, We compute the electron transmission through different types of dangling-bond wire on Si(100)–H (2 × 1). Recent progress in the construction of atomic-size interconnects (Weber et al 2012 Science 335 64) shows the possibility to achieve atomic-size circuits via atomic-size wires using silicon surfaces. Hence, electron transport through quasi-1D Si-based structures is a compelling reality. Prior to these achievements, wires formed by controlled desorption of passivating H atoms off the monohydride Si(100) surface have been shown to be subject to 1D correlations and instabilities (Hitosugi et al 1999 Phys. Rev. Lett. 82 4034). The present calculations are based on density functional theory and evaluate the electron transmission though the minimum-energy 1D structures that can be formed when creating dangling-bonds on Si(100)-(2 × 1)-H. The purpose of this study is twofold: (i) to assess the transport properties of these atomic-size wires in the presence of 1D instabilities; (ii) to provide a fingerprint for experimental identification of the instability through the transport characteristics of the wires. To these aims, we evaluate the electron transport through the wires in the absence of instabilities, in the presence of distortions (Jahn–Teller instabilities) and in the presence of magnetic instabilities (ferro- and antiferro-ordering). We find that instabilities substantially reduce the transport capabilities of dangling-bond wires leading to transmissions that vary so differently with electron energy that an unambiguous identification of the wire type should be accessible in transport experiments., This work has been supported by the European Union Integrated Project AtMol (http://www.atmol.eu)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Leakage current in atomic-size surface interconnects

  • Kepenekian, M.
  • Robles, Roberto
  • Joachim, Christian
  • Lorente, Nicolás
The current lost into a doped silicon substrate from a surface-supported nanowire is evaluated using transport calculations based on density functional theory. The calculations are performed for an infinite non-periodic wire for various types of dopants. Two concentration limits are explored: the single-dopant and the massively doped limits. Our calculations permit us to conclude that n-doped Si will be less leaky than p-doped Si. For the low bias at which these nanodevices will operate, leakage currents will be less than 10% for n-doped Si substrates and 20% for p-doped ones. © 2013 AIP Publishing LLC., The authors acknowledge financial support from the European-Union Integrated Project AtMol ( http://www.atmol.eu)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface-state engineering for interconnects on H-passivated Si(100)

  • Kepenekian, M.
  • Robles, Roberto
  • Joachim, Christian
  • Lorente, Nicolás
Surface-state engineering strategies for atomic-size interconnects on H-passivated Si(100) surfaces are explored. The well-known simple interconnect formed by removing H-atoms from one of the Si atoms per dimer of a dimer row along the Si(100) surface is poorly conducting. This is because one-dimensional-like instabilities open electronic gaps. Here, we explore two strategies to reduce the instabilities: spacing the dangling bonds with H atoms and changing the geometry by increasing the lateral size of the wires. The resulting wires are evaluated using density functional theory. Surprisingly, zigzag dangling-bond wires attain atomically confined conduction properties comparable with the conduction of free-standing metallic monatomic wires. These results hint at band-engineering strategies for the development of electronically driven nanocircuits. © 2013 American Chemical Society., The authors acknowledge financial support from the European-Union Integrated Project AtMol (http://www.atmol.eu)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Surface-state engineering for interconnects on H-passivated Si(100)

  • Robles, Roberto
  • Kepenekian, M.
  • Joachim, Christian
  • Lorente, Nicolás
Presentado al 1st International Workshop on Nanopackaging celebrado en Grenoble (Suiza) del 27 al 28 de Junio de 2013., Financial support: AtMol consortium., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunneling electron induced rotation of a copper phthalocyanine molecule on Cu(111)

  • Schaffert, Johannes
  • Cottin, Maren C.
  • Sonntag, A.
  • Bobisch, Christian A.
  • Möller, Rolf
  • Gauyacq, J. P.
  • Lorente, Nicolás
The rates of a hindered molecular rotation induced by tunneling electrons are evaluated using scattering theory within the sudden approximation. Our approach explains the excitation of copper phthalocyanine molecules (CuPc) on Cu(111) as revealed in a recent measurement of telegraph noise in a scanning tunneling microscopy experiment. A complete explanation of the experimental data is performed by computing the geometry of the adsorbed system, its electronic structure, and the energy transfer between tunneling electrons and the molecule's rotational degree of freedom. The results unambiguously show that tunneling electrons induce a frustrated rotation of the molecule. In addition, the theory determines the spatial distribution of the frustrated rotation excitation, confirming the striking dominance of two out of four molecular lobes in the observed excitation process. This lobe selectivity is attributed to the different hybridizations with the underlying substrate. © 2013 American Physical Society., J.S., A.S., C.A.B., and R.M. gratefully acknowledge financial support by the Deutsche Forschungsgemeinschaft through the SFB616 ‘Energy Dissipation at Surfaces.’ N.L. is supported by the ICT-FET Integrated Project AtMol (http://www.atmol.eu). M.C.C. thanks the Studienstiftung desdeutschen Volkes., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Vibrational transition rule during a through-bond electron transfer process

  • Monturet, Serge
  • Kepenekian, M.
  • Robles, Roberto
  • Lorente, Nicolás
  • Joachim, Christian
The transition rule governing the inelastic excitations of molecular vibrations occurring during a molecular through-state electron transfer process is presented. Using an effective Hamiltonian model, it is shown that the quantum time oscillation of the intermediate electronic state population triggers this transition. Its corresponding quantum oscillation frequency has to be equal to a quantum of vibration. This transition rule is extended to the full spectrum of a quantum vibrator. This new transition rule is expected to be robust when electronically coupling the molecule to the metallic pads of a voltage-biased tunnel junction. © 2013 Elsevier B.V. All rights reserved., This work has been supported by the ICT-FET European Union Integrated Project AtMol (http://www.atmol.eu)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin transport in dangling-bond wires on doped H-passivated Si(100)

  • Kepenekian, M.
  • Robles, Roberto
  • Rurali, Riccardo
  • Lorente, Nicolás
New advances in single-atom manipulation are leading to the creation of atomic structures on H-passivated Si surfaces with functionalities important for the development of atomic and molecular based technologies. We perform total-energy and electron-transport calculations to reveal the properties and understand the features of atomic wires crafted by H removal from the surface. The presence of dopants radically change the wire properties. Our calculations show that dopants have a tendency to approach the dangling-bond wires, and in these conditions, transport is enhanced and spin selective. These results have important implications in the development of atomic-scale spintronics showing that boron, and to a lesser extent phosphorous, convert the wires in high-quality spin filters., This work has been supported by the European Union Integrated Project AtMol (http://www.atmol.eu). R Rurali acknowledges funding under contract Nos. FEDER-FIS2012–37549-C05–05 and CSD2007–00041 of the Ministerio de Economía y Competitividad (MINECO). R Robles and N. Lorente acknowledge financial support from Spanish MINECO (Grant No. MAT2012–38318-C03–02 with joint financing by FEDER Funds from the European Union)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Noncontact atomic force microscopy and density functional theory studies of the (2×2) reconstructions of the polar AlN(0001) surface

  • Chaumeton, Florian
  • Robles, Roberto
  • Pruneda, Miguel
  • Lorente, Nicolás
  • Eydoux, Benoit
  • Bouju, Xavier
  • Gauthier, Sébastien
  • Martrou, David
Combined experimental and theoretical studies permit us to determine new protocols for growing by molecular beam epitaxy the technologically interesting N-rich aluminum nitride (AlN) surfaces. This is achieved by dosing the precursor gases at unusually low rates. With the help of calculated structures by using density functional theory and Boltzmann distribution of the reconstructed cells, we proposed to assign the measured surface obtained with a growth rate of 10 nm/h to a (2×2) reconstructed surface involving one additional N atom per unit cell. These N-rich AlN surfaces could open new routes to dope AlN layers with important implications in high-power and temperature technological applications., This work is supported by the European Commission within the projects AtMol (Contract No. ICT-270028) and PAMS (Contract No. ICT-610446). Part of the calculation was performed using High Performance Computing resources from the Calcul in Midi-Pyrenees (CALMIP) facilities (Grant No. 2011-[P0832])., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Noncontact atomic force microscopy and density functional theory studies of the (2×2) reconstructions of the polar AlN(0001) surface

  • Chaumeton, F. Centre d'Élaboration de Matériaux et d'Etudes Structurales
  • Robles, Roberto|||0000-0001-7808-0395
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Lorente Palacios, Nicolás
  • Eydoux, Benoit
  • Bouju, Xavier
  • Gauthier, Sébastien
  • Martrou, David
Combined experimental and theoretical studies permit us to determine new protocols for growing by molecular beam epitaxy the technologically interesting N-rich aluminum nitride (AlN) surfaces. This is achieved by dosing the precursor gases at unusually low rates. With the help of calculated structures by using density functional theory and Boltzmann distribution of the reconstructed cells, we proposed to assign the measured surface obtained with a growth rate of 10 nm/h to a (2×2) reconstructed surface involving one additional N atom per unit cell. These N-rich AlN surfaces could open new routes to dope AlN layers with important implications in high-power and temperature technological applications.