Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 50
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A C60-aryne building block: synthesis of a hybrid all-carbon nanostructure

  • García, D.
  • Rodríguez-Pérez, L.
  • Herranz, M.A.
  • Peña Gil, Diego
  • Guitián Rivera, Enrique
  • Bailey, S.
  • Al-Galiby, Q.
  • Noori, M.
  • Lambert, C. J.
  • Pérez Meirás, María Dolores
  • Martín, N.
The synthesis of a [60]fullerene-benzyne building block and its further chemical cycloaddition reaction with graphene has resulted in a new all-carbon hybrid material which has been characterized by TGA, FTIR and Raman spectroscopies, XPS as well as AFM and TEM. Based on computational studies, the formation of both [2+2] and [4+2] cycloadducts on the graphene surface is feasible
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Straightforward Synthesis of Novel Acene-Based Aryne Precursors

  • Rodríguez-Lojo, Diego
  • Peña Gil, Diego
  • Pérez Meirás, María Dolores
  • Guitián Rivera, Enrique
Large polycyclic o-(trimethylsilyl)aryl triflates are easily obtained by reaction of commercially available bisaryne precursors with cyclopentadienones. The transformation involves controlled generation of one of the aryne functionalities, trapping by Diels–Alder reaction with a dienone, and chelotropic extrusion of CO. The newly synthesized triflates are precursors of acene-based arynes, including a didehydropentacene
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

1,7-Naphthodiyne: a new platform for the synthesis of novel, sterically congested PAHs

  • Pozo Míguez, Iago
  • Cobas Martínez, Agustín
  • Peña Gil, Diego
  • Guitián Rivera, Enrique
  • Pérez Meirás, María Dolores
The synthesis of an efficient precursor of the novel 1,7-naphthodiyne synthon is reported. Preliminary experiments demonstrate the usefulness of this platform for the synthesis of sterically congested polyarenes, such as helicenes and angularly fused acene derivatives. Furthermore, a novel intramolecular aryne trapping reaction is described
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Characterizing aliphatic moieties in hydrocarbons with atomic force microscopy

  • Schuler, Bruno
  • Zhang, Yunlong
  • Collazos Suárez, Sara
  • Fatayer, Shadi
  • Meyer, Gehrard
  • Pérez Meirás, María Dolores
  • Guitián Rivera, Enrique
  • Harper, Michael R.
  • Kushnerick, J. Douglas
  • Peña Gil, Diego
  • Gross, Leo
We designed and studied hydrocarbon model compounds by high- resolution noncontact atomic force microscopy. In addition to planar polycyclic aromatic moieties, these novel model compounds feature linear alkyl and cycloaliphatic motifs that exist in most hydrocarbon resources – particularly in petroleum asphaltenes and other petroleum fractions – or in lipids in biological samples. We demonstrate successful intact deposition by sublimation of the alkyl-aromatics, and differentiate aliphatic moieties from their aromatic counterparts which were generated from the former by atomic manipulation. The characterization by AFM in combination with atomic manipulation provides clear fingerprints of the aromatic and aliphatic moieties that will facilitate their assignment in a priori unknown samples.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Site-selective reversible Diels–Alder reaction between a biphenylene-based polyarene and a semiconductor surface

  • Godlewski, Szymon
  • Engelund, Mads
  • Peña Gil, Diego
  • Zuzak, Rafał
  • Kawai, Hiroyo
  • Kolmer, Marek
  • Caeiro Rodríguez, Jorge
  • Guitián Rivera, Enrique
  • Vollhardt, K. Peter C.
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
  • Pérez Meirás, María Dolores
Understanding the mechanisms involved in the covalent attachment of organic molecules to surfaces is a major challenge for nanotechnology and surface science. On the basis of classical organic chemistry mechanistic considerations, key issues such as selectivity and reactivity of the organic adsorbates could be rationalized and exploited for the design of molecular-scale circuits and devices. Here we use tris(benzocyclobutadieno)triphenylene, a singular Y-shaped hydrocarbon containing antiaromatic cyclobutadienoid rings, as a molecular probe to study the reaction of polycyclic conjugated molecules with atomic scale moieties, dangling-bond (DB) dimers on a hydrogen-passivated Ge(001):H surface. By combining molecular design, synthesis, scanning tunneling microscopy and spectroscopy (STM/STS) and computational modeling, we show that the attachment involves a concerted [4+2] cycloaddition reaction that is completely site-selective and fully reversible. This selectivity, governed by the bond alternation induced by the presence of the cyclobutadienoid rings, allows for the control of the orientation of the molecules with respect to the surface DB-patterning. We also demonstrate that by judicious modification of the electronic levels of the polycyclic benzenoid through substituents, the reaction barrier height can be modified. Finally, we show that after deliberate tip-induced covalent bond cleavage, adsorbed molecules can be used to fine tune the electronic states of the DB dimer. This power to engineer deliberately the bonding configuration and electronic properties opens new perspectives for creating prototypical nanoscale circuitry
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resonant lifetime of core-excited organic adsorbates from first principles

  • Fratesi, Guido
  • Motta, C.
  • Trioni, M. I.
  • Brivio, Gian Paolo
  • Sánchez-Portal, Daniel
arXiv:1404.5595v1, We investigate by first-principles simulations the resonant electron-transfer lifetime from the excited state of an organic adsorbate to a semiconductor surface, namely, isonicotinic acid on rutile TiO2(110). The molecule-substrate interaction is described using density functional theory, while the effect of a truly semi-infinite substrate is taken into account by Green's function techniques. Excitonic effects due to the presence of core-excited atoms in the molecule are shown to be instrumental to understand the electron-transfer times measured using the so-called core-hole-clock technique. In particular, for the isonicotinic acid on TiO2(110), we find that the charge injection from the LUMO is quenched, since this state lies within the substrate band gap. We compute the resonant charge-transfer times from LUMO+1 and LUMO+2, and systematically investigate the dependence of the elastic lifetimes of these states on the alignment among adsorbate and substrate states. © 2014 American Chemical Society., We acknowledge support from the MIUR of Italy through PRIN project DSSCX (no. 20104XET32). C.M. thanks CARIPLO Foundation for its support within the PCAM European Doctoral Programme and Pirelli Corimav for his Ph.D. scholarship. D.S.-P. acknowledges support from the Basque Departamento de Educación, UPV/EHU (Grant No. IT-366-07), the Spanish Ministerio de Ciencia e Innovación (Grant No. FIS2010- 19609-C02-02), the ETORTEK program funded by the Basque Departamento de Industria and the Diputación Foral de Guipuzcoa, the EU through the FP7 PAMS project, and the German DFG through SFB 1083., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical control of electrical contact to sp2 carbon atoms

  • Frederiksen, Thomas
  • Foti, Giuseppe
  • Scheurer, Fabrice
  • Speisser, Virginie
  • Schull, Guillaume
This work is licensed under a Creative Commons Attribution 3.0 Unported License., Carbon-based nanostructures are attracting tremendous interest as components in ultrafast electronics and optoelectronics. The electrical interfaces to these structures play a crucial role for the electron transport, but the lack of control at the atomic scale can hamper device functionality and integration into operating circuitry. Here we study a prototype carbon-based molecular junction consisting of a single C 60 molecule and probe how the electric current through the junction depends on the chemical nature of the foremost electrode atom in contact with the molecule. We find that the efficiency of charge injection to a C 60 molecule varies substantially for the considered metallic species, and demonstrate that the relative strength of the metal-C bond can be extracted from our transport measurements. Our study further suggests that a single-C 60 junction is a basic model to explore the properties of electrical contacts to meso-and macroscopic sp 2 carbon structures. © 2014 Macmillan Publishers Limited., T.F. and G.F. acknowledge the support of the Basque Departamento de Educación and the UPV/EHU (Grant No. IT-756-13), the Spanish Ministerio de Economía y Competitividad (Grant No. FIS2010-19609-CO2-00) and the European Union Integrated Project PAMS. F.S. and G.S. acknowledge the Agence National de la Recherche for financial support (Contracts TRANSMOL ANR-2010-JCJC-1004 and SPINCOMM ANR-13-BS10-0016)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient calculation of inelastic vibration signals in electron transport: Beyond the wide-band approximation

  • Lü, Jing-Tao
  • Christensen, Rasmus B.
  • Foti, Giuseppe
  • Frederiksen, Thomas
  • Gunst, Tue
  • Brandbyge, Mads
We extend the simple and efficient lowest order expansion (LOE) for inelastic electron tunneling spectroscopy (IETS) to include variations in the electronic structure on the scale of the vibration energies. This enables first-principles calculations of IETS line shapes for molecular junctions close to resonances and band edges. We demonstrate how this is relevant for the interpretation of experimental IETS using both a simple model and first-principles simulations. © 2014 American Physical Society., We acknowledge computer resources from the DCSC, and support from Center for Nanostructured Graphene (Project DNRF58). J.T.L. acknowledges support from the National Natural Science Foundation of China (Grants No. 11304107 and No. 61371015), and the Fundamental Research Funds for the Central Universities (HUST:2013TS032). G.F. and T.F. acknowledge support from the Basque Departamento de Educación and the UPV/EHU (Grant No. IT-756-13), the Spanish Ministerio de Economía y Competitividad (Grant No. FIS2010-19609-CO2-00), and the European Union Integrated Project PAMS., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Substrate-induced stabilization and reconstruction of zigzag edges in graphene nanoislands on Ni(111)

  • Garcia-Lekue, Aran
  • Olle, Marc
  • Sánchez-Portal, Daniel
  • Palacios, J. J.
  • Mugarza, Aitor
  • Ceballos, Gustavo
  • Gambardella, Pietro
arXiv:1502.00771v1, We combine experimental observations by scanning tunneling microscopy (STM) and density functional theory (DFT) to reveal the most stable edge structures of graphene on Ni(111) as well as the role of stacking-driven activation and suppression of edge reconstruction. Depending on the position of the outermost carbon atoms relative to hollow and on-top Ni sites, zigzag edges have very different energies. Triangular graphene nanoislands are exclusively bound by the more stable zigzag hollow edges. In hexagonal nanoislands, which are constrained by geometry to alternate zigzag hollow and zigzag top edges along their perimeter, only the hollow edge is stable, whereas the top edges spontaneously reconstruct into the (57) pentagon–heptagon structure. Atomically resolved STM images are consistent with either top-fcc or top-hcp epitaxial stacking of graphene and Ni sites, with the former being favored by DFT. Finally, we find that there is a one-to-one relationship between the edge type, graphene stacking, and orientation of the graphene islands., We acknowledge support from the Basque Departamento de Educacion, UPV/EHU (Grant No. IT-756-13), the Spanish Ministerio de Ciencia e Innovación (Grant Nos. MAT2013-46593-C6-2-P and MAT2013-46593-C6-5-P, MAT2007-62732), the ETORTEK program funded by the Basque Departamento de Industria, the European Union FP7-ICT Integrated Project PAMS under Contract No. 610446, the European Research Council (StG 203239 NOMAD), and Agència de Gestió d’Ajuts Universitaris i de Recerca (2014 SGR 715)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunneling spectroscopy of close-spaced dangling-bond pairs in Si(001):H

  • Engelund, Mads
  • Zuzak, Rafał
  • Godlewski, Szymon
  • Kolmer, Marek
  • Frederiksen, Thomas
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
This work is licensed under a Creative Commons Attribution 4.0 International License., We present a combined experimental and theoretical study of the electronic properties of close-spaced dangling-bond (DB) pairs in a hydrogen-passivated Si(001):H p-doped surface. Two types of DB pairs are considered, called >cross> and >line> structures. Our scanning tunneling spectroscopy (STS) data show that, although the spectra taken over different DBs in each pair exhibit a remarkable resemblance, they appear shifted by a constant energy that depends on the DB-pair type. This spontaneous asymmetry persists after repeated STS measurements. By comparison with density functional theory (DFT) calculations, we demonstrate that the magnitude of this shift and the relative position of the STS peaks can be explained by distinct charge states for each DB in the pair. We also explain how the charge state is modified by the presence of the scanning tunneling microscopy (STM) tip and the applied bias. Our results indicate that, using the STM tip, it is possible to control the charge state of individual DBs in complex structures, even if they are in close proximity. This observation might have important consequences for the design of electronic circuits and logic gates based on DBs in passivated silicon surfaces., This work is funded by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446). ME, TF, AGL and DSP also acknowledge support from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P) and the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13). MK acknowledges financial support received from the Polish National Science Centre for preparation of his PhD dissertation (decision number: DEC-2013/08/T/ST3/00047) and from the Foundation for Polish Science (FNP)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The butterfly - a well-defined constant-current topography pattern on Si(001):H and Ge(001):H resulting from current-induced defect fluctuations

  • Engelund, Mads
  • Godlewski, Szymon
  • Kolmer, Marek
  • Zuzak, Rafał
  • Such, Bartosz
  • Frederiksen, Thomas
  • Szymonski, Marek
  • Sánchez-Portal, Daniel
This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence., Dangling bond (DB) arrays on Si(001):H and Ge(001):H surfaces can be patterned with atomic precision and they exhibit complex and rich physics making them interesting from both technological and fundamental perspectives. But their complex behavior often makes scanning tunneling microscopy (STM) images difficult to interpret and simulate. Recently it was shown that low-temperature imaging of unoccupied states of an unpassivated dimer on Ge(001):H results in a symmetric butterfly-like STM pattern, despite that the equilibrium dimer configuration is expected to be a bistable, buckled geometry. Here, based on a thorough characterization of the low-bias switching events, we propose a new imaging model featuring a dynamical two-state rate equation. This model allows us to reproduce the features of the observed symmetric empty-state images which strongly corroborates the idea that the patterns arise due to fast switching events and provides insight into the relation between the tunneling current and switching rates. Our new imaging model is general and can be applied to other systems that exhibit rapid fluctuations during STM experiments., The work is funded by the European Commission under the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (Contract No. 610446) and National Science Centre, Poland (2014/15/D/ST3/02975). ME, TF, and DSP also acknowledge support from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P) and the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13). MK acknowledges financial support received from the Foundation for Polish Science (FNP). RZ acknowledges support received from KNOW (scholarship KNOW/44/SS/RZ/2015)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of k-point sampling in the supercell approach to inelastic electron tunneling spectroscopy simulations of molecular monolayers

  • Foti, Giuseppe
  • Sánchez-Portal, Daniel
  • Arnau, Andrés
  • Frederiksen, Thomas
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., While the role of sampling of the electron momentum k in supercell calculations of the elastic electron transmission is well understood, its influence in the case of inelastic electron tunneling (IET) has not yet been systematically explored. Here we compare ab initio IET spectra of molecular monolayers in the commonly used Γ-point approximation to rigorously k-converged results. We study four idealized molecular junctions with either alkanedithiolates or benzenedithiolates, and explore variations due to varying molecular tilt angle, density, as well as chemical identity of the monolayer. We show that the Γ-point approximation is reasonable for a range of systems, but that a rigorous convergence is needed for accurate signal amplitudes. We also describe an approximative scheme which reduces the computational cost of the k-averaged calculation in our implementation., We acknowledge the support of the Basque Departamento de Educacion and the UPV/EHU (Grant No. IT-756-13), the Spanish Ministerio de Economía y Competitividad (MINECO Grants No. MAT2013-46593-C6-2-P and FIS2013-48286-C2-2-P), and the European Union Integrated Project PAMS (Contract No. 610446)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable band alignment with unperturbed carrier mobility of on-surface synthesized organic semiconducting wires

  • Vasseur, Guillaume
  • Vitali, Lucia
  • Lobo-Checa, Jorge
  • Oteyza, Dimas G. de
  • Sedona, Francesco
  • Ortega, J. Enrique
This is an open access article published under an ACS AuthorChoice License.-- et al., The tunable properties of molecular materials place them among the favorites for a variety of future generation devices. In addition, to maintain the current trend of miniaturization of those devices, a departure from the present top-down production methods may soon be required and self-assembly appears among the most promising alternatives. On-surface synthesis unites the promises of molecular materials and of self-assembly, with the sturdiness of covalently bonded structures: An ideal scenario for future applications. Following this idea, we report the synthesis of functional extended nanowires by self-assembly. In particular, the products correspond to one-dimensional organic semiconductors. The uniaxial alignment provided by our substrate templates allows us to access with exquisite detail their electronic properties, including the full valence band dispersion, by combining local probes with spatial averaging techniques. We show how, by selectively doping the molecular precursors, the product's energy level alignment can be tuned without compromising the charge carrier's mobility., This work was partially funded by MIUR (PRIN 2010/11, Project 2010BNZ3F2: “DESCARTES”), by EU project PAMS (Agreement No. 610446), by the European Research Council (ERC) under the EU Horizon 2020 research and innovation programme (Grant Agreement No. 635919), by the European Community’s Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284, by the Spanish Ministry of Science and Competitiveness (MINECO, MAT2013-46593-C6-6-P and MAT2013-46593-C6-4-P) and FEDER, by the Basque Government (Grant Nos. IT-621-13 and IT-627-13)) and by the University of Padova (Grant CPDA154322, Project AMNES)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identifying highly conducting Au-C links through inelastic electron tunneling spectroscopy

  • Foti, Giuseppe
  • Vázquez, Héctor
  • Sánchez-Portal, Daniel
  • Arnau, Andrés
  • Frederiksen, Thomas
We use inelastic electron tunneling spectroscopy first-principles simulations to identify the different chemical bonds present at metal-molecule junctions. We unambiguously identify the nature of these bonds from two distinctive features in the calculated spectra: (i) the presence (or absence) of active vibrational modes and (ii) the dependence of vibrational frequencies on electrode separation. We use this method to present a study of the vibrational properties of alkanes bound to the electrodes via highly conducting Au-C links. In the experiment, these links were formed from molecules synthesized with trimethyl-tin (SnMe3) terminations, where the SnMe3 groups were removed in situ at the junction, in a process involving both breaking and formation of bonds [Cheng, Z.-L.; Skouta, R.; Vázquez, H.; Widawsky, J. R.; Schneebeli, S.; Chen, W.; Hybertsen, M. S.; Breslow, R.; Venkataraman, L. Nat. Nanotechnol. 2011, 6, 353-357]. We obtain the vibrational fingerprint of these direct Au-alkane 0links and extend this study to the other scenario considered in that paper (bonding via SnMe2 groups), which may be relevant under other experimental conditions. We also explore the effect of deuteration on inelastic electron tunneling spectroscopy (IETS). Complete deuteration of the molecules diminishes the differences of the spectra corresponding to the two bonding geometries, making identification more difficult. IETS of an isolated SnMe3 fragment provides an additional basis for comparison in the characterization of the molecular junction., H.V. acknowledges financial support from the Academy of Sciences of the Czech Republic through the J.E. Purkyně fellowship. G.F., D.S.-P., A.A., and T.F. acknowledge the support of the Basque Departamento de Educacion and the UPV/EHU (Grant No. IT-756-13) and the Spanish Ministerio de Economia y Competitividad (Grant No. FIS2013-48286-C2-2-P and Grant No. MAT2013-46593-C6-2-P). D.S.-P. and T.F. acknowledge the European Union FP7-ICT project PAMS (Contract No. 610446)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Massive surface reshaping mediated by metal-organic complexes

  • Abadia, Mikel
  • González-Moreno, Rubén
  • Sarasola, Ane
  • Otero, Gonzalo
  • Verdini, Alberto
  • Floreano, Luca
  • Garcia-Lekue, Aran
  • Rogero, Celia
We present a unique remodeling of flat copper terraces induced by organic molecules. In particular, we show how metal-phthalocyanines (MPc, M = Zn and Cu) tailor the formation of regular arrays of Cu nanostripes on its (110) surface. The MPc mediated reshaping of Cu(110) terraces is found to involve a massive reorganization of Cu adatoms, at variance with the conventional changes of metal reconstructions upon molecular adsorption observed so far. By combining experimental and theoretical surface science techniques, we reveal the key role played by the metal atom at the molecular center in reshaping the terrace structure. Moreover, we demonstrate that extra Cu adatoms surrounding the molecules stabilize the molecular decoration of the Cu nanostripes. The massive surface reshaping is thus due to molecular mediated unidirectional blocking of adatom surface diffusion followed by adatom capture and accumulation., We acknowledge support from the Basque Department of Education, UPV/EHU (Grants IT-756-13 and IT-621-13), the Spanish Government (Grants FIS2010-19609-C02-01, MAT2010-21156-C03-01 and -C03-03, and PIB2010US-00652), and the European Union FP7-ICT Integrated Project PAMS under contract No. 610446., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

π band dispersion along conjugated organic nanowires synthesized on a metal oxide semiconductor

  • Vasseur, Guillaume
  • Abadia, Mikel
  • Miccio, Luis A.
  • Brede, Jens
  • Garcia-Lekue, Aran
  • Oteyza, Dimas G. de
  • Rogero, Celia
  • Lobo-Checa, Jorge
  • Ortega, J. Enrique
Surface-confined dehalogenation reactions are versatile bottom-up approaches for the synthesis of carbonbased nanostructures with predefined chemical properties. However, for devices generally requiring low-conductivity substrates, potential applications are so far severely hampered by the necessity of a metallic surface to catalyze the reactions. In this work we report the synthesis of ordered arrays of poly(p-phenylene) chains on the surface of semiconducting TiO(110) via a dehalogenative homocoupling of 4,4″- dibromoterphenyl precursors. The supramolecular phase is clearly distinguished from the polymeric one using low-energy electron diffraction and scanning tunneling microscopy as the substrate temperature used for deposition is varied. X-ray photoelectron spectroscopy of C 1s and Br 3d core levels traces the temperature of the onset of dehalogenation to around 475 K. Moreover, angle-resolved photoemission spectroscopy and tightbinding calculations identify a highly dispersive band characteristic of a substantial overlap between the precursor's π states along the polymer, considered as the fingerprint of a successful polymerization. Thus, these results establish the first spectroscopic evidence that atomically precise carbon-based nanostructures can readily be synthesized on top of a transition-metal oxide surface, opening the prospect for the bottom-up production of novel molecule-semiconductor devices., This work was supported by the Spanish Ministry of Economy (Grant No. MAT2013-46593-C6-4-P), the Basque Government (Grant No. IT-621-13), and the European Research Council under the EU Horizon 2020 research and innovation program (Grant Agreement No. 635919). We also acknowledge support from the Basque Department of Education, UPV/EHU (Grant No. IT-756-13), the Spanish Ministry of Science and Innovation (Grant No. MAT2013-46593-C6-2-P), and the European Union FP7-ICT Integrated Project PAMS (Contract No. 610446)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Noncontact atomic force microscopy and density functional theory studies of the (2×2) reconstructions of the polar AlN(0001) surface

  • Chaumeton, Florian
  • Robles, Roberto
  • Pruneda, Miguel
  • Lorente, Nicolás
  • Eydoux, Benoit
  • Bouju, Xavier
  • Gauthier, Sébastien
  • Martrou, David
Combined experimental and theoretical studies permit us to determine new protocols for growing by molecular beam epitaxy the technologically interesting N-rich aluminum nitride (AlN) surfaces. This is achieved by dosing the precursor gases at unusually low rates. With the help of calculated structures by using density functional theory and Boltzmann distribution of the reconstructed cells, we proposed to assign the measured surface obtained with a growth rate of 10 nm/h to a (2×2) reconstructed surface involving one additional N atom per unit cell. These N-rich AlN surfaces could open new routes to dope AlN layers with important implications in high-power and temperature technological applications., This work is supported by the European Commission within the projects AtMol (Contract No. ICT-270028) and PAMS (Contract No. ICT-610446). Part of the calculation was performed using High Performance Computing resources from the Calcul in Midi-Pyrenees (CALMIP) facilities (Grant No. 2011-[P0832])., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A tunable electronic beam splitter realized with crossed graphene nanoribbons

  • Brandimarte, Pedro
  • Engelund, Mads
  • Papior, Nick
  • Garcia-Lekue, Aran
  • Frederiksen, Thomas
  • Sánchez-Portal, Daniel
Graphene nanoribbons (GNRs) are promising components in future nanoelectronics due to the large mobility of graphene electrons and their tunable electronic band gap in combination with recent experimental developments of on-surface chemistry strategies for their growth. Here, we explore a prototype 4-terminal semiconducting device formed by two crossed armchair GNRs (AGNRs) using state-of-the-art first-principles transport methods. We analyze in detail the roles of intersection angle, stacking order, inter-GNR separation, GNR width, and finite voltages on the transport characteristics. Interestingly, when the AGNRs intersect at θ=60°, electrons injected from one terminal can be split into two outgoing waves with a tunable ratio around 50% and with almost negligible back-reflection. The split electron wave is found to propagate partly straight across the intersection region in one ribbon and partly in one direction of the other ribbon, i.e., in analogy with an optical beam splitter. Our simulations further identify realistic conditions for which this semiconducting device can act as a mechanically controllable electronic beam splitter with possible applications in carbon-based quantum electronic circuits and electron optics. We rationalize our findings with a simple model suggesting that electronic beam splitters can generally be realized with crossed GNRs., The authors acknowledge financial support from FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under Contract No. 610446), the Spanish Ministerio de Economia y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P), the Basque Departamento de Educacion, and the UPV/EHU (Grant No. IT-756-13). N.P. acknowledges financial support from No. EU H2020 Project No. 676598, “MaX: Materials at the eXascale” Center of Excellence in Supercomputing Applications., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bias-dependent local structure of water molecules at a metallic interface

  • Pedroza, Luana S.
  • Brandimarte, Pedro
  • Reily Rocha, Alexandre
  • Fernández-Serra, M-V.
Understanding the local structure of water at the interfaces of metallic electrodes is a key issue in aqueous-based electrochemistry. Nevertheless a realistic simulation of such a setup is challenging, particularly when the electrodes are maintained at different potentials. To correctly compute the effect of an external bias potential applied to truly semi-infinite surfaces, we combine Density Functional Theory (DFT) and Non-Equilibrium Green's Function (NEGF) methods. This framework allows for the out-of-equilibrium calculation of forces and dynamics, and directly correlates to the chemical potential of the electrodes, which is introduced experimentally. In this work, we apply this methodology to study the electronic properties and atomic forces of a water molecule at the interface of a gold surface. We find that the water molecule tends to align its dipole moment with the electric field, and it is either repelled or attracted to the metal depending on the sign and magnitude of the applied bias, in an asymmetric fashion., The work was funded by DOE Early Career Awards No. DE-SC0003871 and DE-FG02-09ER16052. L. S. P. and A. R. R. also acknowledge financial support from ICTP-SAIFR (FAPESP project No. 2011/11973-4) and the ICTP-Simons Associate Scheme. P. B. acknowledges financial support from the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446), the Spanish Agencia Estatal de Investigación (Grant No. MAT2016-78293-C6-4-R) and the Dep. de Educación of the Basque Government and UPV/EHU (Grant No. IT-756-13). This research used computational resources at the Center for Functional Nanomaterials, Brookhaven National Laboratory, which is supported by the US Department of Energy under Contract No. DE-AC02-98CH10886 and the S. Dumont supercomputer at the National Laboratory for Scientific Computing (LNCC/MCTI, Brazil)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Doping of graphene nanoribbons via functional group edge modification

  • Carbonell, Eduard
  • Hieulle, Jeremy
  • Vilas-Varela, Manuel
  • Brandimarte, Pedro
  • Iraola, Mikel
  • Barragán, Ana
  • Li, Jingcheng
  • Abadia, Mikel
  • Corso, Martina
  • Sánchez-Portal, Daniel
  • Peña, Diego
  • Pascual, José I.
We report the on-surface synthesis of 7-armchair graphene nanoribbons (7-AGNRs) substituted with nitrile (CN) functional groups. The CN groups are attached to the GNR backbone by modifying the 7-AGNR precursor. Whereas many of these groups survive the on-surface synthesis, the reaction process causes the cleavage of some CN from the ribbon backbone and the on-surface cycloisomerization of few nitriles onto pyridine rings. Scanning tunneling spectroscopy and density functional theory reveal that CN groups behave as very efficient n-dopants, significantly downshifting the bands of the ribbon and introducing deep impurity levels associated with the nitrogen electron lone pairs., This work was supported by FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under Contract No. 610446), by the Agencia Estatal de Investigacion (Cooperative Grant No. MAT2016-78293 and Grant FIS2015-62538-ERC), the Basque Government (Dep. de Educacion and UPV/EHU, Grant No. IT-756-13, and Dep. Industry, Grant PI_2015_1_42), the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016−2019, ED431G/09), and the European Regional Development Fund (ERDF)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improvements on non-equilibrium and transport Green function techniques: The next-generation TRANSIESTA

  • Papior, Nick
  • Lorente, Nicolás
  • Frederiksen, Thomas
  • García Arribas, Alberto
  • Brandbyge, Mads
We present novel methods implemented within the non-equilibrium Green function code (NEGF) TRANSIESTA based on density functional theory (DFT). Our flexible, next-generation DFT–NEGF code handles devices with one or multiple electrodes (N≥1) with individual chemical potentials and electronic temperatures. We describe its novel methods for electrostatic gating, contour optimizations, and assertion of charge conservation, as well as the newly implemented algorithms for optimized and scalable matrix inversion, performance-critical pivoting, and hybrid parallelization. Additionally, a generic NEGF “post-processing” code (TBTRANS/PHTRANS) for electron and phonon transport is presented with several novelties such as Hamiltonian interpolations, N≥1 electrode capability, bond-currents, generalized interface for user-defined tight-binding transport, transmission projection using eigenstates of a projected Hamiltonian, and fast inversion algorithms for large-scale simulations easily exceeding 10 atoms on workstation computers. The new features of both codes are demonstrated and bench-marked for relevant test systems., We acknowledge financial support from EU H2020 project no. 676598, “MaX: Materials at the eXascale” Center of Excellence in Supercomputing Applications, the Basque Departamento de Educación and the UPV/EHU (IT-756-13), the Spanish Ministerio de Economía y Competitividad (MAT2013-46593-C6-2-P, MAT2015-66888-C3-2-R, FIS2012-37549-C05-05, and FIS2015-64886-C5-4-P as well as the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496), the European Union FP7-ICT project PAMS (Contract No. 610446), and the Generalitat de Catalunya (2014 SGR 301)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantum dots embedded in graphene nanoribbons by chemical substitution

  • Carbonell, Eduard
  • Brandimarte, Pedro
  • Balog, Richard
  • Corso, Martina
  • Kawai, Shigeki
  • Garcia-Lekue, Aran
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Meyer, Ernst
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Bottom-up chemical reactions of selected molecular precursors on a gold surface can produce high quality graphene nanoribbons (GNRs). Here, we report on the formation of quantum dots embedded in an armchair GNR by substitutional inclusion of pairs of boron atoms into the GNR backbone. The boron inclusion is achieved through the addition of a small amount of boron substituted precursors during the formation of pristine GNRs. In the pristine region between two boron pairs, the nanoribbons show a discretization of their valence band into confined modes compatible with a Fabry–Perot resonator. Transport simulations of the scattering properties of the boron pairs reveal that they selectively confine the first valence band of the pristine ribbon while allowing an efficient electron transmission of the second one. Such band-dependent electron scattering stems from the symmetry matching between the electronic wave functions of the states from the pristine nanoribbons and those localized at the boron pairs., This work was supported by FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446), by the Spanish Ministerio de Economia y Competitividad (MINECO) (Grants No. MAT2013-46593-C6) and the Basque Government (Dep. de Educacion and UPV/EHU, Grant No. IT-756-13, and Dep. Industry, Grant PI_2015_1_42), by the Japan Science and Technology Agency (JST) “Precursory Research for Embryonic Science and Technology (PRESTO)” for a project of “Molecular technology and creation of new function”, by JSPS KAKENHI Grant No. 15K21765, by the Swiss National Science Foundation and by the Swiss Nanoscience Institute (SNI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Theoretical insights into unexpected molecular core level shifts: Chemical and surface effects

  • Sarasola, Ane
  • Abadia, Mikel
  • Rogero, Celia
  • Garcia-Lekue, Aran
A set of density-functional theory based tools is employed to elucidate the influence of chemical and surface-induced changes on the core level shifts of X-ray photoelectron spectroscopy experiments. The capabilities of our tools are demonstrated by analyzing the origin of an unpredicted component in the N 1s core level spectra of metal phthalocyanine molecules (in particular ZnPc) adsorbed on Cu(110). We address surface induced effects, such as splitting of the lowest unoccupied molecular orbital or local electrostatic effects, demonstrating that these cannot account for the huge core level shift measured experimentally. Our calculations also show that, when adsorbed at low temperatures, these molecules might capture hydrogen atoms from the surface, giving rise to hydrogenated molecular species and, consequently, to an extra component in the molecular core level spectra. Only upon annealing, and subsequent hydrogen release, would the molecules recover their nominal structural and electronic properties., The authors thank L. Floreano and M. Blanco-Rey for useful discussions, and acknowledge support from the Basque Departamento de Educacion and UPV/EHU (Grants No. PI-2016-1-0027, IT-756-13 and IT-621-13), the Spanish Ministry (Grants No. MAT2016-78293-C6-4-R, MAT2016-78293-C6-5-R, and FIS2016-75862-P), and the European Union FP7-ICT Integrated Project PAMS under Contract No. 610446., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Width-dependent band gap in armchair graphene nanoribbons reveals Fermi level pinning on Au(111)

  • Merino-Díez, Nestor
  • Garcia-Lekue, Aran
  • Carbonell, Eduard
  • Li, Jingcheng
  • Corso, Martina
  • Colazzo, Luciano
  • Sedona, Francesco
  • Sánchez-Portal, Daniel
  • Pascual, José I.
  • Oteyza, Dimas G. de
We report the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4″-dibromo-para-terphenyl as the molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can subsequently be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbon's band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinning as the band gap decreases below a threshold value around 1.7 eV. Such behavior is of critical importance to understand the properties of potential contacts in GNR-based devices. Our measurements further reveal a particularly interesting system for studying Fermi level pinning by modifying an adsorbate's band gap while maintaining an almost unchanged interface chemistry defined by substrate and adsorbate., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 635919), from the European Union FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (Contract No. 610446), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. MAT2016-78293-C6), from the Basque Department of Education (PI-2016-1-0027), and from the University of Padova (Grant CPDA154322, Project AMNES)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Building a 22-ring nanographene by combining in-solution and on-surface syntheses

  • Zuzak, Rafał
  • Castro-Esteban, Jesús
  • Brandimarte, Pedro
  • Engelund, Mads
  • Cobas, Agustín
  • Piątkowski, Piotr
  • Kolmer, Marek
  • Pérez, Dolores
  • Guitián, Enrique
  • Szymonski, Marek
  • Sánchez-Portal, Daniel
  • Godlewski, Szymon
  • Peña, Diego
A nanographene formed by the fusion of 22 benzene rings has been prepared by combining an in-solution Pd-catalyzed cycloaddition reaction and on-surface Au-promoted cyclodehydrogenation. The structure and electronic properties of the resulting three-fold symmetric CH molecule have been characterized by scanning probe microscopy with atomic resolution and corroborated by theoretical modelling., This research was supported by the National Science Center, Poland (2017/26/E/ST3/00855), the EU project PAMS (610446), the Agencia Estatal de Investigacion (MAT2016-78293-C6-3-R, MAT2016-78293-C6-4-R, FIS2017-83780-P and CTQ2016-78157-R), the Xunta de Galicia (Centro singular de investigacion de Galicia, acreditacion 2016-2019, ED431G/09) and the European Regional Development Fund (ERDF). R. Z. acknowledges support received from the National Science Center, Poland (2017/24/T/ST5/00262)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Site-selective reversible Diels–Alder reaction between a biphenylene-based polyarene and a semiconductor surface

  • Godlewski, Szymon
  • Engelund, Mads
  • Peña, Diego
  • Zuzak, Rafał
  • Kawai, Hiroyo
  • Kolmer, Marek
  • Caeiro, Jorge
  • Guitián, Enrique
  • Vollhardt, K. Peter C.
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
  • Pérez, Dolores
Understanding the mechanisms involved in the covalent attachment of organic molecules to surfaces is a major challenge for nanotechnology and surface science. On the basis of classical organic chemistry mechanistic considerations, key issues such as selectivity and reactivity of the organic adsorbates could be rationalized and exploited for the design of molecular-scale circuits and devices. Here we use tris(benzocyclobutadieno)triphenylene, a singular Y-shaped hydrocarbon containing antiaromatic cyclobutadienoid rings, as a molecular probe to study the reaction of polycyclic conjugated molecules with atomic scale moieties, dangling-bond (DB) dimers on a hydrogen-passivated Ge(001):H surface. By combining molecular design, synthesis, scanning tunneling microscopy and spectroscopy (STM/STS) and computational modeling, we show that the attachment involves a concerted [4+2] cycloaddition reaction that is completely site-selective and fully reversible. This selectivity, governed by the bond alternation induced by the presence of the cyclobutadienoid rings, allows for the control of the orientation of the molecules with respect to the surface DB-patterning. We also demonstrate that by judicious modification of the electronic levels of the polycyclic benzenoid through substituents, the reaction barrier height can be modified. Finally, we show that after deliberate tip-induced covalent bond cleavage, adsorbed molecules can be used to fine tune the electronic states of the DB dimer. This power to engineer deliberately the bonding configuration and electronic properties opens new perspectives for creating prototypical nanoscale circuitry., This work was supported by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract no. 610446), by the Polish Ministry for Science and Higher Education from financial resources for science in 2013–2017 granted for an international co-financed project (contract no. 2913/7.PR/2013/2) and by projects CTQ2016-78157-R, MAT2016-78293-C6-3R and MAT2016-78293-C6-4R (AEI/FEDER, UE). EG, DP and DP are grateful for financial support from the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016–2019, ED431G/09) and the European Union (European Regional Development Fund-ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Survival of spin state in magnetic porphyrins contacted by graphene nanoribbons

  • Li, Jingcheng
  • Merino-Díez, Nestor
  • Carbonell, Eduard
  • Vilas-Varela, Manuel
  • Oteyza, Dimas G. de
  • Peña, Diego
  • Corso, Martina
  • Pascual, José I.
We report on the construction and magnetic characterization of a fully functional hybrid molecular system composed of a single magnetic porphyrin molecule bonded to graphene nanoribbons with atomically precise contacts. We use on-surface synthesis to direct the hybrid creation by combining two molecular precursors on a gold surface. High-resolution imaging with a scanning tunneling microscope finds that the porphyrin core fuses into the graphene nanoribbons through the formation of new carbon rings at chemically predefined positions. These ensure the stability of the hybrid and the extension of the conjugated character of the ribbon into the molecule. By means of inelastic tunneling spectroscopy, we prove the survival of the magnetic functionality of the contacted porphyrin. The molecular spin appears unaffected by the graphenoid electrodes, and we simply observe that the magnetic anisotropy appears modified depending on the precise structure of the contacts., We acknowledge the financial support from Spanish Agencia Estatal de Investigación (AEI) (project nos. MAT2016-78293-C6 and FIS2015-62538-ERC, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), the Basque Government (Department Industry, grant no. PI-2015-1-42), the European project PAMS (610446), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016 to 2019, ED431G/09), the European Research Council (grant agreement no. 635919), and the European Regional Development Fund. A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unraveling the electronic structure of narrow atomically precise chiral graphene nanoribbons

  • Merino-Díez, Nestor
  • Li, Jingcheng
  • Garcia-Lekue, Aran
  • Vasseur, Guillaume
  • Vilas-Varela, Manuel
  • Carbonell, Eduard
  • Corso, Martina
  • Ortega, J. Enrique
  • Peña, Diego
  • Pascual, José I.
  • Oteyza, Dimas G. de
Recent advances in graphene-nanoribbon-based research have demonstrated the controlled synthesis of chiral graphene nanoribbons (chGNRs) with atomic precision using strategies of on-surface chemistry. However, their electronic characterization, including typical figures of merit like band gap or frontier band’s effective mass, has not yet been reported. We provide a detailed characterization of (3,1)-chGNRs on Au(111). The structure and epitaxy, as well as the electronic band structure of the ribbons, are analyzed by means of scanning tunneling microscopy and spectroscopy, angle-resolved photoemission, and density functional theory., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant nos. MAT2016-78293-C6, FIS2015-62538-ERC), from the Basque Government (grant nos. IT-621-13, PI-2015-1-42, PI-2016-1-0027), from the European Commission in FP7 FET-ICT “Planar Atomic and Molecular Scale Devices (PAMS) project (contract no. 610446), from the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016−2019, ED431G/09), and from the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A well-defined STM image resulting from current-induced defect fluctuations: The butterfly on Si(001):H and Ge(001):H

  • Sánchez-Portal, Daniel
  • Engelund, Mads
  • Frederiksen, Thomas
  • Godlewski, Szymon
  • Kolmer, Marek
  • Zuzak, Rafał
  • Such, Bartosz
  • Szymonski, Marek
Resumen del trabajo presentado al APS March Meeting, celebrado en New Orleans, Louisiana (USA) del 13 al 17 de marzo de 2017., Dangling bond (DB) arrays on Si(001):H and Ge(001):H surfaces can be patterned with atomic precision and exhibit complex and rich physics. Scanning tunneling microscopy (STM) images of DB arrays are often difficult to interpret and simulate. Recently it was shown that low-temperature imaging of unoccupied states of an unpassivated dimer on Ge(001):H results in a symmetric "butterfly"-like STM pattern, despite that the equilibrium dimer configuration is expected to be a bistable, buckled geometry. Here, based on a thorough characterization of the low-bias switching, we propose a new imaging model featuring a dynamical two-state rate equation. On both Si(001):H and Ge(001):H, we can reproduce the observed features, which strongly corroborates that the patterns arise from fast switching events and provides insight into the relation between the tunneling current and switching rates. We envision that our imaging model can be applied to simulate other bistable systems., FP7-FET-ICT PAMS (contract 610446), 2014/15/D/ST3/02975, MAT2013-46593-C6-2-P, IT-756-13, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

An electronic beam splitter realized with crossed graphene nanoribbons

  • Frederiksen, Thomas
  • Brandimarte, Pedro
  • Engelund, Mads
  • Papior, Nick
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
Resumen del trabajo presentado al APS March Meeting, celebrado en New Orleans, Louisiana (USA) del 13 al 17 de marzo de 2017., Graphene nanoribbons (GNRs) are promising components in future nanoelectronics. We have explored a prototype 4-terminal semiconducting device formed by two crossed armchair GNRs (AGNRs) using state-of-the-art first-principles transport methods. We analyze in detail the roles of intersection angle, stacking order, inter-GNR separation, and finite voltages on the transport characteristics. Interestingly, when the AGNRs intersect at θ = 60º, electrons injected from one terminal can be split into two outgoing waves with a tunable ratio around 50% and with almost negligible back-re ection. The splitted electron wave is found to propagate partly straight across the intersection region in one ribbon and partly in one direction of the other ribbon, i.e., in analogy of an optical beam splitter. Our simulations further identify realistic conditions for which this semiconducting device can act as a mechanically controllable electronic beam splitter with possible applications in carbon-based quantum electronic circuits and electron optics., FP7-FET-ICT PAMS (610446), MAT2013-46593-C6-2-P, IT-756-13., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Towards electronic devices using graphene nanoribbons

  • Brandimarte, Pedro
  • Engelund, Mads
  • Papior, Nick
  • Garcia-Lekue, Aran
  • Frederiksen, Thomas
  • Sánchez-Portal, Daniel
Resumen del trabajo presentado a la 13th European Conference on Surface Crystallography and Dynamics, celebrada en Donostia-San Sebastián (España) del 19 al 21 de junio de 2017., In this talk, I will present some studies of prototype electron devices made out of graphene nanoribbons that we have recently performed in our group in San Sebastián. In collaboration with our experimental colleagues, we have studied the properties of armchair GNRs (AGNRs) doped and functionalized in different ways. In particular, we have studied 7-AGNRs periodically doped with boron pairs on Au(111), and compared our findings with scanning tunneling microscopy/spectroscopy (STM/STS) and angle-resolved photoemission (ARPES) data. Furthermore, it is possible to grow structures formed by pristine segments separated by regions doped with B pairs. We have studied the properties of such boron defects as scattering centers for GNR electrons, and found that they provide large effective barriers for the propagation of electrons in the valence band (VB), but are nearly transparent for the immediately lower energy band (VB-1) due to the different symmetry of both bands. As a result, the VB gives rise to quantized levels in the pristine regions that are clearly identified (see the Figure), with a remarkable agreement between theory and experiment. From a purely theoretical perspective, we have explored a prototype 4-terminal semiconducting device formed by two crossed AGNRs as a function of the intersection angle, stacking, inter-GNR separation, GNR width, and voltage. Interestingly, when the AGNRs intersect at θ=60° electrons injected from one terminal can be split into two outgoing waves with a tunable ratio around 50% and with almost negligible back-reflection. The split electron-wave is found to propagate partly straight across the intersection region in one ribbon and partly in one direction of the other ribbon, i.e., in analogy of an optical beam splitter. We rationalize our findings with a simple model that suggests that electronic beam splitters can generally be realized with crossed GNRs., The authors acknowledge financial support from FP7 FET-ICT project No. 610446 project, EU H2020 project No. 676598, MINECO (Grant No. MAT2013-46593-C6-2-P), the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Two-probe STM/STS experiments performed on atomic wires and single molecules supported on Ge(001) surface

  • Kolmer, Marek
  • Brandimarte, Pedro
  • Zajac, Lukasz
  • Godlewski, Szymon
  • Kawai, Hiroyo
  • Frederiksen, Thomas
  • Engelund, Mads
  • Garcia-Lekue, Aran
  • Lorente, Nicolás
  • Lis, Jakub
  • Echavarren, Antonio M.
  • Joachim, Christian
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., Due to unprecedented precision reaching sub-picometers scanning probe microscopy (SPM) methods are currently the most popular and reliable tools for local characterization of atomic and single-molecule systems supported on surfaces of solids. However, direct determination of many functional properties, including especially electronic transport in prototypical planar atomic-scale devices, lies beyond the single-probe SPM approach. Recent technical advances provide multi-probe SPM instruments, which are able to operate on the same surface simultaneously with stability comparable to best cryogenic single-probe SPMs. In this work, we describe the full methodology behind atomically defined two-probe scanning tunneling microscopy and spectroscopy (STM/STS) experiments performed on model systems on the germanium (001) surface. Firstly, we discuss our methodology for fine relative positioning of two STM probes on Ge(001) and Ge(001):H surfaces with exact atomic precision and lateral probe to probe distances below 50 nm. That technical results opens possibility of direct testing of on-surface electron transport in a planar geometry. It is realized by a novel two-probe STS (TP-STS) methodology, in which both STM tips are kept in tunneling conditions above a grounded sample. By applying a small AC component to a varied DC bias voltage on one of the probes and by demodulation of resulting current signals on both of the probes, we extract corresponding dI1/dV1 (single-probe, vertical) and dI2/dV1 (two-probe, planar) STS signals. In this case of Ge(001) we show that the detection of TPSTS signal is related to quasi-ballistic hot-electron transport through one-dimensional π* states of Ge dimer-row wires located within bulk bang gap of the surface. Our two-probe experimental results are corroborated by first-principles calculations combining the nonequilibrium Green's function (NEGF) formalism with density function theory (DFT) in a fourterminal setup. Finally, we present a non-local switching of single trinaphthylene molecule adsorbed on Ge(001) surface. The switching is induced by hot electrons injection into discussed π* states of Ge dimer-rows. Here by taking the advantage of two-probe STM configuration we observe “in-situ” non-local molecule switching using one of the probes as a source of hot electrons injected into surface states and the other as a detector of a molecule motion., Support by the European Commission under PAMS project (contract no. 610446) and by the Polish Ministry of Science and Higher Education (contract no. 0341/IP3/2016/74) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Two-probe scanning tunneling spectroscopy: determination of transconductance in planar atomic structures

  • Kolmer, Marek
  • Brandimarte, Pedro
  • Zuzak, Rafał
  • Godlewski, Szymon
  • Kawai, Hiroyo
  • Frederiksen, Thomas
  • Engelund, Mads
  • Garcia-Lekue, Aran
  • Lis, Jakub
  • Joachim, Christian
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
Resumen del trabajo presentado a la International Conference on Nanoscience + Technology (ICN+T), celebrada en Brno (Czech Republic) del 22 al 27 de julio de 2018., Due to unprecedented precision reaching picometers scanning probe microscopy (SPM) methods are currently the most popular and reliable tools for local characterization of atomic and single-molecule systems supported on surfaces of solids. However, direct determination of many functional properties, including especially electronic transport in prototypical planar atomic-scale devices, lies beyond the single-probe SPM approach. Recent technical advances provide multi-probe SPM instruments, which are able to operate on the same surface simultaneously with stability comparable to best cryogenic single-probe SPMs. In this work, we describe the full methodology behind atomically defined two-probe scanning tunneling microscopy/spectroscopy (2P-STM/STS) experiments performed on model systems on the germanium (001) surface. Firstly, we discuss our methodology for fine relative positioning of two STM probes on Ge(001) and Ge(001):H surfaces with exact atomic precision and lateral probe to probe distances below 50 nm. That technical results opens possibility of direct testing of on-surface electron transport in atomic-scale systems. Here, it is realized by a novel 2P-STS methodology, in which both STM tips are kept in tunneling conditions above a grounded sample. By applying a small AC component to a varied DC bias voltage on one of the probes and by demodulation of resulting current signals on the second probe, we extract corresponding transconductance dI2/dV1 2P-STS signal. In the case of the Ge(001) surface we show that the detection of transconductance is related to coherent hot-electron transport through quasi one-dimensional π* states of Ge dimer-rows located within bulk bang gap of the surface. Our two-probe experimental results are corroborated by first-principles calculations combining the non-equilibrium Green’s function (NEGF) formalism with density function theory (DFT) in a four-terminal setup., Support by the European Commission under PAMS project (contract no. 610446) and by the Polish Ministry of Science and Higher Education (contract no. 0341/IP3/2016/74) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electron transport simulations of 4-terminal crossed graphene nanoribbons devices

  • Brandimarte, Pedro
  • Papior, Nick
  • Engelund, Mads
  • Garcia-Lekue, Aran
  • Frederiksen, Thomas
  • Sánchez-Portal, Daniel
Resumen del trabajo presentado al APS March Meeting, celebrado en Baltimore, Maryland (USA) del 14 al 18 de marzo de 2016., Recently, it has been reported theoretically a current switching mechanism by voltage control in a system made by two perpendicular 14-armchair graphene nanoribbons (GNRs). In order to investigate the possibilities of using crossed GNRs as ON/OFF devices, we have studied their electronic and transport properties as function structural parameters determining the crossing. Our calculations were performed with TranSIESTA code, which has been recently generalized to consider N >= 1 arbitrarily distributed electrodes at finite bias. We find that the transmission along each individual GNR and among them strongly depends on the stacking. For a 60º rotation angle, the lattice matching in the crossing region provokes a strong scattering effect that translates into an increased interlayer transmission., FP7 FET-ICT PAMS-project (European Commission, contract 610446), MINECO (grant MAT2013-46593-C6-2-P) and Basque Dep. de Educacion, UPV/EHU (grant IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of superlattice arrays of ultra-long graphene nanoribbons

  • Moreno, César
  • Paradinas, Markos
  • Vilas-Varela, Manuel
  • Panighel, Mirko
  • Ceballos, Gustavo
  • Peña, Diego
  • Mugarza, Aitor
We report the on-surface synthesis of graphene nanoribbon superlattice arrays directed by the herringbone reconstruction of the Au(111) surface. The uniaxial anisotropy of the zigzag pattern of the reconstruction defines a one dimensional grid for directing the Ullmann polymerization and inducing periodic arrays of parallel ultra-long nanoribbons (>100 nm), where the periodicity is varied with coverage at discrete values following a hierarchical templating behavior., C. M. was supported by AGAUR through the FP7-EU under Marie Curie COFUND action 600385. M. P. acknowledges the Spanish Government for financial support through PTA2014-09788-I. Funded by the CERCA Programme/Generalitat de Catalunya. We acknowledge support from the Ministerio de Ciencia e Innovación (MAT2013-46593-C6-2-P, MAT2013-46593-C6-5-P, MAT2016-78293-C6-2-R, MAT2016-78293-C6-4-R and Severo Ochoa No. SEV-2013-0295), the EU project PAMS (610446) the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2016–2019, ED431G/09), and the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single spin localization and manipulation in graphene open-shell nanostructures

  • Li, Jingcheng
  • Sanz, Sofía
  • Corso, Martina
  • Choi, Deung-Jang
  • Peña, Diego
  • Frederiksen, Thomas
  • Pascual, José I.
Turning graphene magnetic is a promising challenge to make it an active material for spintronics. Predictions state that graphene structures with specific shapes can spontaneously develop magnetism driven by Coulomb repulsion of π-electrons, but its experimental verification is demanding. Here, we report on the observation and manipulation of individual magnetic moments in graphene open-shell nanostructures on a gold surface. Using scanning tunneling spectroscopy, we detect the presence of single electron spins localized around certain zigzag sites of the carbon backbone via the Kondo effect. We find near-by spins coupled into a singlet ground state and quantify their exchange interaction via singlet-triplet inelastic electron excitations. Theoretical simulations picture how electron correlations result in spin-polarized radical states with the experimentally observed spatial distributions. Extra hydrogen atoms bound to radical sites quench their magnetic moment and switch the spin of the nanostructure in half-integer amounts. Our work demonstrates the intrinsic π-paramagnetism of graphene nanostructure, We acknowledge financial support from Spanish AEI (MAT2016-78293-C6, FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Program MDM-2016-0618), the Basque Government (Department of Education, Grant PI-2015-1-42), the EU project PAMS (610446), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2016- 2019, ED431G/09), and the European Regional Development Fund (ERDF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On-surface synthesis of chlorinated narrow graphene nanoribbon organometallic hybrids

  • Zuzak, Rafał
  • Brandimarte, Pedro
  • Olszowski, Piotr
  • Izydorczyk, Irena
  • Markoulides, Marios
  • Such, Bartosz
  • Kolmer, Marek
  • Szymonski, Marek
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Gourdon, André
  • Godlewski, Szymon
Graphene nanoribbons (GNRs) and their derivatives attract growing attention due to their excellent electronic and magnetic properties as well as the fine-tuning of such properties that can be obtained by heteroatom substitution and/or edge morphology modification. Here, we introduce graphene nanoribbon derivatives—organometallic hybrids with gold atoms incorporated between the carbon skeleton and side Cl atoms. We show that narrow chlorinated 5-AGNROHs (armchair graphene nanoribbon organometallic hybrids) can be fabricated by on-surface polymerization with omission of the cyclodehydrogenation reaction by a proper choice of tailored molecular precursors. Finally, we describe a route to exchange chlorine atoms connected through gold atoms to the carbon skeleton by hydrogen atom treatment. This is achieved directly on the surface, resulting in perfect unsubstituted hydrogen-terminated GNRs. This will be beneficial in the molecule on-surface processing when the preparation of final unsubstituted hydrocarbon structure is desired., This work was supported by the National Science Center, Poland (2019/35/B/ST5/02666), and the EU Project PAMS (610446). A.G.L., D.S.P., and P.B. acknowledge the Spanish Agencia Estatal de Investigación (Grants MAT2016-78293-C6-4-R, PID2019-107338RB-C66, and FIS2017-83780-P), Dep. Educación of the Basque Government and UPV/EHU (Grant IT-756-13), and the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant 863098) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Diels–Alder attachment of a planar organic molecule to a dangling bond dimer on a hydrogenated semiconductor surface

  • Godlewski, Szymon
  • Kawai, Hiroyo
  • Engelund, Mads
  • Kolmer, Marek
  • Zuzak, Rafał
  • Garcia-Lekue, Aran
  • Novell-Leruth, Gerard
  • Echavarren, Antonio M.
  • Sánchez-Portal, Daniel
  • Joachim, Christian
  • Saeys, Mark
Construction of single-molecule electronic devices requires the controlled manipulation of organic molecules and their properties. This could be achieved by tuning the interaction between the molecule and individual atoms by local “on-surface” chemistry, i.e., the controlled formation of chemical bonds between the species. We demonstrate here the reversible attachment of a planar conjugated polyaromatic molecule to a pair of unpassivated dangling bonds on a hydrogenated Ge(001):H surface via a Diels–Alder [4+2] addition using the tip of a scanning tunneling microscope (STM). Due to the small stability difference between the covalently bonded and a nearly undistorted structure attached to the dangling bond dimer by long-range dispersive forces, we show that at cryogenic temperatures the molecule can be switched between both configurations. The reversibility of this covalent bond forming reaction may be applied in the construction of complex circuits containing organic molecules with tunable properties., This work was supported by the National Science Centre, Poland (2014/15/D/ST3/02975). The experiment was carried out using equipment purchased with financial support from the European Regional Development Fund within the framework of the Polish Innovation Economy Operational Program (contract no. POIG.02.01.00-12-023/08). ME, AGL and DSP acknowledge funding by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract no. 610446), the Spanish Ministerio de Economia y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P) and the Basque Department of Education and the UPV/EHU (Grant No. IT-756-13). MK acknowledges financial support received from the Foundation for Polish Science (FNP). SG acknowledges the support from the Polish Ministry for Science and Higher Education, contract no. 0322/IP3/2013/72. AME acknowledges the MINECO (Grant No. CTQ2013-42106-P). HK acknowledges the A*STAR Computational Resource Centre (A*CRC) for the computational resources and support. CJ acknowledges the MANA NEXT financial support during this work. RZ acknowledges support received from KNOW (scholarship KNOW/44/SS/RZ/2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interaction of a conjugated polyaromatic molecule with a single dangling bond quantum dot on a hydrogenated semiconductor

  • Godlewski, Szymon
  • Kolmer, Marek
  • Engelund, Mads
  • Kawai, Hiroyo
  • Zuzak, Rafał
  • Garcia-Lekue, Aran
  • Saeys, Mark
  • Echavarren, Antonio M.
  • Joachim, Christian
  • Sánchez-Portal, Daniel
  • Szymonski, Marek
Controlling the strength of the coupling between organic molecules and single atoms provides a powerful tool for tuning electronic properties of single-molecule devices. Here, using scanning tunneling microscopy and spectroscopy (STM/STS) supported by theoretical modeling, we study the interaction of a planar organic molecule (trinaphthylene) with a hydrogen-passivated Ge(001):H substrate and a single dangling bond quantum dot on that surface. The electronic structure of the molecule adsorbed on the hydrogen-passivated surface is similar to the gas phase structure and the measurements show that HOMO and LUMO states contribute to the STM filled and empty state images, respectively. Furthermore, we show that the electronic properties are not significantly affected when the molecule is attached to the single dangling bond, which is in contrast with the strong interaction of the molecule with a dangling bond dimer. Our results show that the dangling bond quantum dots could stabilize organic molecules on a hydrogenated semiconductor without affecting their originally designed gas phase electronic properties. Together with the ability to laterally manipulate the molecules on the surface, this will be advantageous in the construction of single-molecule devices, where the coupling and positioning of the molecules on the substrate could be tuned by a proper design of the surface quantum dot arrays, comprising both single and dimerized dangling bonds., This work was supported by the Polish Ministry for Science and Higher Education, contract no. 0322/IP3/2013/72. The experiment was carried out using equipment purchased with financial support from the European Regional Development Fund within the framework of the Polish Innovation Economy Operational Program (contract no. POIG.02.01.00-12-023/08). ME, AGL and DSP acknowledge funding by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446), the Spanish Ministerio de Economia y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P) and the Basque Department of Education and the UPV/EHU (Grant No. IT-756-13). MK acknowledges financial support received from the Foundation for Polish Science (FNP). SG acknowledges the support from the National Science Centre, Poland (2014/15/D/ST3/02975). AME acknowledges the MINECO (Grant No. CTQ2013-42106-P). HK acknowledges the A*STAR Computational Resource Centre (A*CRC) for the computational resources and support. RZ acknowledges support received from KNOW (scholarship KNOW/44/SS/RZ/2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Orbital-selective spin excitation of a magnetic porphyrin

  • Rubio-Verdú, Carmen
  • Sarasola, Ane
  • Choi, Deung-Jang
  • Majzik, Zsolt
  • Ebeling, René
  • Calvo, M. Reyes
  • Ugeda, Miguel M.
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Scattering of electrons by localized spins is the ultimate process enabling detection and control of the magnetic state of a spin-doped material. At the molecular scale, scattering is mediated by the orbitals hosting the spin. Here we report the selective excitation of a molecular spin by tunneling through different molecular orbitals. Spatially resolved tunneling spectra on iron-porphyrins reveal that the inelastic spin excitation extends beyond the iron site, changing shape and symmetry along the molecule. Combining density functional theory simulations with a phenomenological scattering model, we show that the extension and lineshape of the inelastic signal are due to excitation pathways assisted by different frontier orbitals. By selecting the intramolecular site for electron injection, the relative weight of iron and pyrrole orbitals in the tunneling process is modified. Thus, the excitation mechanism, reflected by its spectral lineshape, depends on the degree of localization and energy alignment of the chosen molecular orbital., This work has been funded by the COST 15128 Molecular Spintronics project, by Marie Curie IF ARTE, by the Spanish Ministerio de Economía y Competitividad (MINECO) through the cooperative grant No. MAT2016-78293 and grant No. FIS2016-75862-P, and by the Basque Government (Dep. Industry, Grant PI-2015-1-42, Dep. Education, Grant PI-2016-1-27 and Grant IT-756-13), the EU project PAMS (610446), and the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Role of valence states of adsorbates in inelastic electron tunneling spectroscopy: A study of nitric oxide on Cu(110) and Cu(001)

  • Shiotari, Akitoshi
  • Okuyama, Hiroshi
  • Hatta, Shinichiro
  • Aruga, Tetsuya
  • Alducin Ochoa, Maite
  • Frederiksen, Thomas
We studied nitric oxide (NO) molecules on Cu(110) and Cu(001) surfaces with low-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). NO monomers on the surfaces are characterized by STM images reflecting 2π∗ resonance states located at the Fermi level. NO is bonded vertically to the twofold short-bridge site on Cu(110) and to the fourfold hollow site on Cu(001). When NO molecules form dimers on the surfaces, the valence orbitals are modified due to the covalent bonding. We measured inelastic electron tunneling spectroscopy (IETS) for both NO monomers and dimers on the two surfaces, and detected characteristic structures assigned to frustrated rotation and translation modes by density functional theory simulations. Considering symmetries of valence orbitals and vibrational modes, we explain the intensity of the observed IETS signals in a qualitative manner., A.S. acknowledges the support by JSPS KAKENHI Grants No. JP12J00219 and No. JP15H06127. M.A. and T.F. acknowledge financial support by the Basque Departamento de Educacion, Universidades e Investigacin, the University of the Basque Country UPV/EHU (Grant No. IT-756-13) and by the Spanish Ministerio de Economia y Competitividad (FIS2013-48286-C2-2-P and MAT-2013-46593-C6-2-P, respectively). T.F. also acknowledges support by the European Union FP7-ICT project PAMS (Contract No. 610446)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Search for a metallic dangling-bond wire on n-doped H-passivated semiconductor surfaces

  • Engelund, Mads
  • Papior, Nick
  • Brandimarte, Pedro
  • Frederiksen, Thomas
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
arXiv:1609.03842v1, We have theoretically investigated the electronic properties of neutral and n-doped dangling bond (DB) quasi-one-dimensional structures (lines) in the Si(001):H and Ge(001):H substrates with the aim of identifying atomic-scale interconnects exhibiting metallic conduction for use in on-surface circuitry. Whether neutral or doped, DB lines are prone to suffer geometrical distortions or have magnetic ground states that render them semiconducting. However, from our study we have identified one exception—a dimer row fully stripped of hydrogen passivation. Such a DB-dimer line shows an electronic band structure which is remarkably insensitive to the doping level, and thus, it is possible to manipulate the position of the Fermi level, moving it away from the gap. Transport calculations demonstrate that the metallic conduction in the DB-dimer line can survive thermally induced disorder but is more sensitive to imperfect patterning. In conclusion, the DB-dimer line shows remarkable stability to doping and could serve as a one-dimensional metallic conductor on n-doped samples., This work is funded by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (funded by the European Commission under contract No. 610446). ME, PB, TF, AGL, and DSP also acknowledge support from the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P) and the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Substrate-independent growth of atomically precise chiral graphene nanoribbons

  • Oteyza, Dimas G. de
  • Garcia-Lekue, Aran
  • Vilas-Varela, Manuel
  • Merino-Díez, Nestor
  • Carbonell, Eduard
  • Corso, Martina
  • Vasseur, Guillaume
  • Rogero, Celia
  • Guitián, Enrique
  • Pascual, José I.
  • Ortega, J. Enrique
  • Wakayama, Yutaka
  • Peña, Diego
Contributing to the need for new graphene nanoribbon (GNR) structures that can be synthesized with atomic precision, we have designed a reactant that renders chiral (3,1)-GNRs after a multistep reaction including Ullmann coupling and cyclodehydrogenation. The nanoribbon synthesis has been successfully proven on different coinage metals, and the formation process, together with the fingerprints associated with each reaction step, has been studied by combining scanning tunneling microscopy, core-level spectroscopy, and density functional calculations. In addition to the GNR’s chiral edge structure, the substantial GNR lengths achieved and the low processing temperature required to complete the reaction grant this reactant extremely interesting properties for potential applications., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 635919), from ICT-FET EU integrated project PAMS (Agreement No. 610446), from the Spanish Ministry of Science and Competitiveness (MINECO, Grant Nos. MAT2013-46593-C6-01, MAT2013-46593-C6-2-P, MAT2013-46593-C6-4-P, MAT2013-46593-C6-6-P), FEDER, from the Basque Government (Grant Nos. IT-621-13, IT-756-13, and PI2015-042), from the World Premier International Center (WPI) for Materials Nanoarchitectonics (MANA) of the National Institute for Materials Science (NIMS), Tsukuba, Japan, and from JSPS Bilateral Open Partnership Joint Research Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Role of structural and charge-state fluctuations on the tunneling spectroscopy and imaging of dangling-bond pairs and dimers on Si(001):H and Ge(001):H

  • Engelund, Mads
  • Godlewski, Szymon
  • Kolmer, Marek
  • Zuzak, Rafał
  • Such, Bartosz
  • Szymonski, Marek
  • Garcia-Lekue, Aran
  • Mendonça, P. B.
  • Frederiksen, Thomas
  • Sánchez-Portal, Daniel
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 21 al 27 de febrero de 2016., This work is funded by the FP7 FET-ICT “Planar Atomic and Molecular Scale devices” (PAMS) project (contract No. 610446), the Spanish Ministerio de Economía y Competitividad (MINECO) (Grant No. MAT2013-46593-C6-2-P), the Basque Dep. de Educación and the UPV/EHU (Grant No. IT-756-13), and from the Foundation for Polish Science (FNP). MK also acknowledges financial support from the Polish National Science Centre (Grant No. DEC-2013/08/T/ST3/00047)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

p Band Dispersion Along Conjugated Organic Nanowires Synthesized on a Metal Oxide Semiconductor

  • Vasseur, G.
  • Abadia, M.
  • Miccio, L.A.
  • Brede, J.
  • Garcia-Lekue, A.
  • De Oteyza, D.G.
  • Rogero, C.
  • Lobo-Checa, J.
  • Ortega, J.E.
Surface-confined dehalogenation reactions are versatile bottom-up approaches for the synthesis of carbonbased nanostructures with predefined chemical properties. However, for devices generally requiring low-conductivity substrates, potential applications are so far severely hampered by the necessity of a metallic surface to catalyze the reactions. In this work we report the synthesis of ordered arrays of poly(p-phenylene) chains on the surface of semiconducting TiO2(110) via a dehalogenative homocoupling of 4, 4¿- dibromoterphenyl precursors. The supramolecular phase is clearly distinguished from the polymeric one using low-energy electron diffraction and scanning tunneling microscopy as the substrate temperature used for deposition is varied. X-ray photoelectron spectroscopy of C 1s and Br 3d core levels traces the temperature of the onset of dehalogenation to around 475 K. Moreover, angle-resolved photoemission spectroscopy and tightbinding calculations identify a highly dispersive band characteristic of a substantial overlap between the precursor''s p states along the polymer, considered as the fingerprint of a successful polymerization. Thus, these results establish the first spectroscopic evidence that atomically precise carbon-based nanostructures can readily be synthesized on top of a transition-metal oxide surface, opening the prospect for the bottom-up production of novel molecule-semiconductor devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Noncontact atomic force microscopy and density functional theory studies of the (2×2) reconstructions of the polar AlN(0001) surface

  • Chaumeton, F. Centre d'Élaboration de Matériaux et d'Etudes Structurales
  • Robles, Roberto|||0000-0001-7808-0395
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Lorente Palacios, Nicolás
  • Eydoux, Benoit
  • Bouju, Xavier
  • Gauthier, Sébastien
  • Martrou, David
Combined experimental and theoretical studies permit us to determine new protocols for growing by molecular beam epitaxy the technologically interesting N-rich aluminum nitride (AlN) surfaces. This is achieved by dosing the precursor gases at unusually low rates. With the help of calculated structures by using density functional theory and Boltzmann distribution of the reconstructed cells, we proposed to assign the measured surface obtained with a growth rate of 10 nm/h to a (2×2) reconstructed surface involving one additional N atom per unit cell. These N-rich AlN surfaces could open new routes to dope AlN layers with important implications in high-power and temperature technological applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Critical Role of Phenyl Substitution and Catalytic Substrate in the Surface-Assisted Polymerization of Dibromobianthracene Derivatives

  • Moreno, Cesar|||0000-0003-2682-211X
  • Panighel, Mirco|||0000-0001-8413-5196
  • Vilas Varela, Manuel
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Tenorio, María José|||0000-0002-0855-7968
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
Understanding the nature and hierarchy of on-surface reactions is a major challenge for designing coordination and covalent nanostructures by means of multistep synthetic routes. In particular, intermediates and final products are hard to predict since the reaction paths and their activation windows depend on the choice of both the molecular precursor design and the substrate. Here, we report a systematic study of the effect of the catalytic metal surface to reveal how a single precursor can give rise to very distinct polymers that range from coordination and covalent nonplanar polymer chains of distinct chirality to atomically precise graphene nanoribbons and nanoporous graphene. Our precursor consists on adding two phenyl substituents to 10,10'-dibromo-9,9'-bianthracene, a well-studied precursor in the on-surface synthesis of graphene nanoribbons. The critical role of the monomer design in the reaction paths is inferred from the fact that the phenyl substitution leads to very distinct products in each one of the studied metallic substrates.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On-surface synthesis of superlattice arrays of ultra-long graphene nanoribbons

  • Moreno, Cesar|||0000-0003-2682-211X
  • Paradinas, Markos|||0000-0003-1006-9506
  • Vilas Varela, Manuel
  • Panighel, Mirco|||0000-0001-8413-5196
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Peña, Diego|||0000-0003-3814-589X
  • Mugarza, Aitor|||0000-0002-2698-885X
We report the on-surface synthesis of graphene nanoribbon superlattice arrays directed by the herringbone reconstruction of the Au(111) surface. The uniaxial anisotropy of the zigzag pattern of the reconstruction defines a one dimensional grid for directing the Ullmann polymerization and inducing periodic arrays of parallel ultra-long nanoribbons (.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Symmetry forbidden morphologies and domain boundaries in nanoscale graphene islands

  • Parreiras, Sofia de Oliveira|||0000-0001-9009-1994
  • Gastaldo, Michele|||0000-0002-8900-8257
  • Moreno, Cesar|||0000-0003-2682-211X
  • Martins, M. D.
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Ceballos, Gustavo|||0000-0002-6713-7963
  • Paniago, R.
  • Mugarza, Aitor|||0000-0002-2698-885X
The synthesis of graphene nanoislands with tailored quantum properties requires an atomic control of the morphology and crystal structure. As one reduces their size down to the nanometer scale, domain boundary and edge energetics, as well as nucleation and growth mechanisms impose different stability and kinetic landscape from that at the microscale. This offers the possibility to synthesize structures that are exclusive to the nanoscale, but also calls for fundamental growth studies in order to control them. By employing high-resolution scanning tunneling microscopy we elucidate the atomic stacking configurations, domain boundaries, and edge structure of graphene nanoislands grown on Ni(1 1 1) by CVD and post-annealed at different temperatures. We find a non-conventional multistep mechanism that separates the thermal regimes for growth, edge reconstruction, and final stacking configuration, leading to nanoisland morphologies that are incompatible with their stacking symmetry. Whole islands shift their stacking configuration during cooling down, and others present continuous transitions at the edges. A statistical analysis of the domain structures obtained at different annealing temperatures reveals how polycrystalline, ill-defined structures heal into shape-selected islands of a single predominant stacking. The high crystallinity and the control on morphology and edge structure makes these graphene nanoislands ideal for their application in optoelectronics and spintronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A tunable electronic beam splitter realized with crossed graphene nanoribbons

  • Brandimarte Mendonça, Pedro|||0000-0002-8762-5876
  • Engelund, Mads
  • Papior, Nick|||0000-0003-3038-1855
  • Garcia-Lekue, Aran|||0000-0001-5556-0898
  • Frederiksen, Thomas
  • Sanchez-Portal, Daniel|||0000-0001-6860-8790
Graphene nanoribbons (GNRs) are promising components in future nanoelectronics due to the large mobility of graphene electrons and their tunable electronic band gap in combination with recent experimental developments of on-surface chemistry strategies for their growth. Here, we explore a prototype 4-terminal semiconducting device formed by two crossed armchair GNRs (AGNRs) using state-of-the-art first-principles transport methods. We analyze in detail the roles of intersection angle, stacking order, inter-GNR separation, GNR width, and finite voltages on the transport characteristics. Interestingly, when the AGNRs intersect at θ=60°, electrons injected from one terminal can be split into two outgoing waves with a tunable ratio around 50% and with almost negligible back-reflection. The split electron wave is found to propagate partly straight across the intersection region in one ribbon and partly in one direction of the other ribbon, i.e., in analogy with an optical beam splitter. Our simulations further identify realistic conditions for which this semiconducting device can act as a mechanically controllable electronic beam splitter with possible applications in carbon-based quantum electronic circuits and electron optics. We rationalize our findings with a simple model suggesting that electronic beam splitters can generally be realized with crossed GNRs.