Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled assembly of graphene sheets and nanotubes: Fabrication of suspended multi-element all-carbon vibrational structures

  • Tsioutsios, I.
  • Moser, Joel
  • Plaza, José Antonio
  • Bachtold, Adrian
We report on the fabrication and operation of a multi-element vibrational structure consisting of two graphene mechanical resonators coupled by a nanotube beam. The whole structure is suspended. Each graphene resonator is clamped by two metal electrodes. The structure is fabricated using a combination of electron-beam lithography and atomic-force microscopy nano-manipulation. This layout allows us to detect the mechanical vibrations electrically. The measured eigenmodes are localized in either one of the graphene resonators. The coupling due to the nanotube is studied by measuring the shift of the resonance frequency of one graphene resonator as a function of the vibration amplitude of the other resonator. Coupled graphene resonators hold promise for the study of nonlinear dynamics, the manipulation of mechanical states, and quantum non-demolition measurements. © 2013 AIP Publishing LLC., We acknowledge support from the European Union through the RODIN-FP7 project, the ERC-carbonNEMS project, and a Marie Curie Grant (271938), the Spanish state (FIS2009-11284), the Catalan Government (AGAUR and SGR), and by the MINAHE4 project (TEC2011-29140-C03-01)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasensitive force detection with a nanotube mechanical resonator

  • Moser, Joel
  • Güttinger, J.
  • Eichler, Alexander
  • Esplandiú, María J.
  • Liu, D. E.
  • Dykman, M. I.
  • Bachtold, Adrian
arXiv:1305.6887, Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, including the dynamics of individual electron spins, persistent currents in normal metal rings and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz -1/2 at a temperature of 1.2 K using a resonator made of a carbon nanotube. An ultrasensitive method based on cross-correlated electrical noise measurements, in combination with parametric downconversion, is used to detect the low-amplitude vibrations of the nanotube induced by weak forces. The force sensitivity is quantified by applying a known capacitive force. This detection method also allows us to measure the Brownian vibrations of the nanotube down to cryogenic temperatures. Force sensing with nanotube resonators offers new opportunities for detecting and manipulating individual nuclear spins as well as for magnetometry measurements. © 2013 Macmillan Publishers Limited. All rights reserved., We acknowledge support from the European Union through the RODIN-FP7 project, the ERC-carbonNEMS project and a Marie Curie grant (271938), the Spanish state (FIS2009-11284), the Catalan government (AGAUR, SGR) and the US Army Research Office., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic monolayer deposition on the surface of nanotube mechanical resonators

  • Tavernarakis, A.
  • Chaste, Julien
  • Eichler, Alexander
  • Ceballos, Gustavo
  • Gordillo, M. C.
  • Boronat, J.
  • Bachtold, Adrian
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY)., We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science. © 2014 American Physical Society., We acknowledge support from the European Union through the Graphene Flagship (Grant No. 604391), the ERCcarbonNEMS project, and a Marie Curie Grant (No. 271938), the Spanish state (Grant No. MAT2012-31338), and the Catalan government (AGAUR, SGR). C.G. and J. B. acknowledge partial financial support from the Junta de de Andalucía Group PAI-205, Grant No. FQM-5987, MICINN (Spain) Grants No. FIS2010-18356 and No. FIS2011-25275, and Generalitat de Catalunya Grant No. 2009SGR-1003., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Atomic monolayer deposition on the surface of nanotube mechanical resonators

  • Tavernarakis, Alexandros
  • Chaste, Julien
  • Eichler, Alexander
  • Ceballo, Gustavo
  • Gordillo Bargueño, Maria Carmen|||0000-0003-1521-483X
  • Boronat Medico, Jordi|||0000-0002-0273-3457
  • Bachtold, Adrian
We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Atomic monolayer deposition on the surface of nanotube mechanical resonators

  • Tavernarakis, Alexandros
  • Chaste, Julien
  • Eichler, Alexander
  • Ceballo, Gustavo
  • Gordillo Bargueño, Maria Carmen
  • Boronat Medico, Jordi
  • Bachtold, Adrian
We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science., Postprint (published version)