Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Imaging the Proton Concentration and Mapping the Spatial Distribution of the Electric Field of Catalytic Micropumps

  • Farniya, A. Afshar
  • Esplandiu, María J.
  • Reguera, D. (David)
  • Bachtold, A.
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemomechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Imaging the proton concentration and mapping the spatial distribution of the electric field of catalytic micropumps

  • Afshar Farniya, Ali
  • Esplandiú, María J.
  • Reguera, David
  • Bachtold, Adrian
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemomechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes. © 2013 American Physical Society., We acknowledge support from the European Union (ERC-carbonNEMS project), the Spanish government (FIS2009-11284, FIS2011-22603, MAT2012-31338), and the Catalan government (AGAUR, SGR)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sequential tasks performed by catalytic pumps for colloidal crystallization

  • Afshar Farniya, Ali
  • Esplandiú, María J.
  • Bachtold, Adrian
Gold-platinum catalytic pumps immersed in a chemical fuel are used to manipulate silica colloids. The manipulation relies on the electric field and the fluid flow generated by the pump. Catalytic pumps perform various tasks, such as the repulsion of colloids, the attraction of colloids, and the guided crystallization of colloids. We demonstrate that catalytic pumps can execute these tasks sequentially over time. Switching from one task to the next is related to the local change of the proton concentration, which modifies the colloid potential and, consequently, the electric force acting on the colloids., The authors acknowledge support from the European Union (ERC-carbonNEMS project), the Spanish government (FIS2009-11284, MAT2012-31338), and the Catalan government (AGAUR, SGR)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Silicon-based chemical motors: An efficient pump for triggering and guiding fluid motion using visible light

  • Esplandiú, María J.
  • Afshar Farniya, Ali
  • Bachtold, Adrian
We report a simple yet highly efficient chemical motor that can be controlled with visible light. The motor made from a noble metal and doped silicon acts as a pump, which is driven through a light-activated catalytic reaction process. We show that the actuation is based on electro-osmosis with the electric field generated by chemical reactions at the metal and silicon surfaces, whereas the contribution of diffusio-osmosis to the actuation is negligible. Surprisingly, the pump can be operated using water as fuel. This is possible because of the large - Potential of silicon, which makes the electro-osmotic fluid motion sizable even though the electric field generated by the reaction is weak. The electro-hydrodynamic process is greatly amplified with the addition of reactive species, such as hydrogen peroxide, which generates higher electric fields. Another remarkable finding is the tunability of silicon-based pumps. That is, it is possible to control the speed of the fluid with light. We take advantage of this property to manipulate the spatial distribution of colloidal microparticles in the liquid and to pattern colloidal microparticle structures at specific locations on a wafer surface. Silicon-based pumps hold great promise for controlled mass transport in fluids., The authors acknowledge support from MINECO and the “Fondo Europeo de Desarrollo Regional” (FEDER) through Grant MAT2012-31338, the European Union (ERC-carbonNEMS project), and the Catalan government (AGAUR, SGR)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High Quality Factor Mechanical Resonators Based on WSe2 Monolayers

  • Morell, Nicolas
  • Reserbat-Plantey, Antoine
  • Tsioutsios, Ioannis
  • Schädler, Kevin Gerd
  • Dubin, François
  • Koppens, Frank H. L.
  • Bachtold, Adrian
Suspended monolayer transition metal dichalcogenides (TMD) are membranes that combine ultralow mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their mechanical properties at cryogenic temperatures. We find that the quality factor of monolayer WSe2 resonators greatly increases below room temperature, reaching values as high as 1.6 × 104 at liquid nitrogen temperature and 4.7 × 104 at liquid helium temperature. This surpasses the quality factor of monolayer graphene resonators with similar surface areas. Upon cooling the resonator, the resonant frequency increases significantly due to the thermal contraction of the WSe2 lattice. These measurements allow us to experimentally study the thermal expansion coefficient of WSe2 monolayers for the first time. High Q-factors are also found in resonators based on MoS2 and MoSe2 monolayers. The high quality-factor found in this work opens new possibilities for coupling mechanical vibrational states to two-dimensional excitons, valley pseudospins, and single quantum emitters and for quantum opto-mechanical experiments based on the Casimir interaction., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Atomic monolayer deposition on the surface of nanotube mechanical resonators

  • Tavernarakis, Alexandros
  • Chaste, Julien
  • Eichler, Alexander
  • Ceballo, Gustavo
  • Gordillo Bargueño, Maria Carmen|||0000-0003-1521-483X
  • Boronat Medico, Jordi|||0000-0002-0273-3457
  • Bachtold, Adrian
We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Energy-dependent path of dissipation in nanomechanical resonators

  • Güttinger, Johannes
  • Noury, Adrien
  • Weber, Peter
  • Martin Eriksson, Axel
  • Lagoin, Camille
  • Moser, Joel
  • Eichler, Christopher
  • Wallraff, Andreas
  • Isacsson, Andreas
  • Bachtold, Adrian
Energy decay plays a central role in a wide range of phenomena1,2,3, such as optical emission, nuclear fission, and dissipation in quantum systems. Energy decay is usually described as a system leaking energy irreversibly into an environmental bath. Here, we report on energy decay measurements in nanomechanical systems based on multilayer graphene that cannot be explained by the paradigm of a system directly coupled to a bath. As the energy of a vibrational mode freely decays, the rate of energy decay changes abruptly to a lower value. This finding can be explained by a model where the measured mode hybridizes with other modes of the resonator at high energy. Below a threshold energy, modes are decoupled, resulting in comparatively low decay rates and giant quality factors exceeding 1 million. Our work opens up new possibilities to manipulate vibrational states4,5,6,7, engineer hybrid states with mechanical modes at completely different frequencies, and to study the collective motion of this highly tunable system., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy-dependent path of dissipation in nanomechanical resonators

  • Güttinger, Johannes
  • Noury, Adrien
  • Weber, Peter
  • Martin Eriksson, Axel
  • Lagoin, Camille
  • Moser, Joel
  • Eichler, Christopher
  • Wallraff, Andreas
  • Isacsson, Andreas
  • Bachtold, Adrian
Energy decay plays a central role in a wide range of phenomena1,2,3, such as optical emission, nuclear fission, and dissipation in quantum systems. Energy decay is usually described as a system leaking energy irreversibly into an environmental bath. Here, we report on energy decay measurements in nanomechanical systems based on multilayer graphene that cannot be explained by the paradigm of a system directly coupled to a bath. As the energy of a vibrational mode freely decays, the rate of energy decay changes abruptly to a lower value. This finding can be explained by a model where the measured mode hybridizes with other modes of the resonator at high energy. Below a threshold energy, modes are decoupled, resulting in comparatively low decay rates and giant quality factors exceeding 1 million. Our work opens up new possibilities to manipulate vibrational states4,5,6,7, engineer hybrid states with mechanical modes at completely different frequencies, and to study the collective motion of this highly tunable system., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Atomic monolayer deposition on the surface of nanotube mechanical resonators

  • Tavernarakis, Alexandros
  • Chaste, Julien
  • Eichler, Alexander
  • Ceballo, Gustavo
  • Gordillo Bargueño, Maria Carmen
  • Boronat Medico, Jordi
  • Bachtold, Adrian
We study monolayers of noble gas atoms (Xe, Kr, Ar, and Ne) deposited on individual ultraclean suspended nanotubes. For this, we record the resonance frequency of the mechanical motion of the nanotube, since it provides a direct measure of the coverage. The latter is the number of adsorbed atoms divided by the number of the carbon atoms of the suspended nanotube. Monolayers form when the temperature is lowered in a constant pressure of noble gas atoms. The coverage of Xe monolayers remains constant at 1/6 over a large temperature range. This finding reveals that Xe monolayers are solid phases with a triangular atomic arrangement, and are commensurate with the underlying carbon nanotube. By comparing our measurements to theoretical calculations, we identify the phases of Ar and Ne monolayers as fluids, and we tentatively describe Kr monolayers as solid phases. These results underscore that mechanical resonators made from single nanotubes are excellent probes for surface science., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Imaging the Proton Concentration and Mapping the Spatial Distribution of the Electric Field of Catalytic Micropumps

  • Farniya, A. Afshar
  • Esplandiu, María J.
  • Reguera, D. (David)
  • Bachtold, A.
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemomechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High Quality Factor Mechanical Resonators Based on WSe2 Monolayers

  • Morell, Nicolas
  • Reserbat-Plantey, Antoine
  • Tsioutsios, Ioannis
  • Schädler, Kevin Gerd
  • Dubin, François
  • Koppens, Frank H. L.
  • Bachtold, Adrian
Suspended monolayer transition metal dichalcogenides (TMD) are membranes that combine ultralow mass and exceptional optical properties, making them intriguing materials for opto-mechanical applications. However, the low measured quality factor of TMD resonators has been a roadblock so far. Here, we report an ultrasensitive optical readout of monolayer TMD resonators that allows us to reveal their mechanical properties at cryogenic temperatures. We find that the quality factor of monolayer WSe2 resonators greatly increases below room temperature, reaching values as high as 1.6 × 104 at liquid nitrogen temperature and 4.7 × 104 at liquid helium temperature. This surpasses the quality factor of monolayer graphene resonators with similar surface areas. Upon cooling the resonator, the resonant frequency increases significantly due to the thermal contraction of the WSe2 lattice. These measurements allow us to experimentally study the thermal expansion coefficient of WSe2 monolayers for the first time. High Q-factors are also found in resonators based on MoS2 and MoSe2 monolayers. The high quality-factor found in this work opens new possibilities for coupling mechanical vibrational states to two-dimensional excitons, valley pseudospins, and single quantum emitters and for quantum opto-mechanical experiments based on the Casimir interaction., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Silicon-based chemical motors, an efficient pump for triggering and guiding fluid motion using visible light

  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Afshar Farniya, Ali|||0000-0002-4416-6251
  • Bachtold, Adrian|||0000-0002-6145-2479
We report a simple yet highly efficient chemical motor that can be controlled with visible light. The motor made from a noble metal and doped silicon acts as a pump, which is driven through a light-activated catalytic reaction process. We show that the actuation is based on electro-osmosis with the electric field generated by chemical reactions at the metal and silicon surfaces, whereas the contribution of diffusio-osmosis to the actuation is negligible. Surprisingly, the pump can be operated using water as fuel. This is possible because of the large ζ-potential of silicon, which makes the electro-osmotic fluid motion sizable even though the electric field generated by the reaction is weak. The electro-hydrodynamic process is greatly amplified with the addition of reactive species, such as hydrogen peroxide, which generates higher electric fields. Another remarkable finding is the tunability of silicon-based pumps. That is, it is possible to control the speed of the fluid with light. We take advantage of this property to manipulate the spatial distribution of colloidal microparticles in the liquid and to pattern colloidal microparticle structures at specific locations on a wafer surface. Silicon-based pumps hold great promise for controlled mass transport in fluids.