Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage

  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermochemical materials (TCM) can be used for seasonal heat storage, storing high amounts of thermal energy coming from the sun in summer and releasing it in winter, when heating for houses is needed. One promising TCM for building comfort applications is the Na2S/water pair due to its high energy density and appropriate reaction temperature that can be achieved by a solar collector. Nonetheless, Na2S reacts with oxygen and is corrosive to metals, especially with those used to build up heat exchangers or reactors that contain the TCM. Therefore, corrosion tests in a self-developed experimental setup under vacuum conditions, 13 mbar, between Na2S⋅9H2O/5H2O and two reactor metals – copper and stainless steel 316 – have been performed. Since copper is corroded and is highly used for thermochemical reactors, two promising coatings, Halar and electroless nickel, have been applied. Furthermore, aluminium has also been tested coated with these coatings. Halar is a potential candidate to protect both copper and aluminium heat exchangers/reactor that may contain Na2S/H2O pair for thermochemical energy storage. Stainless steel 316 is also corrosion resistant to the selected TCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant Agreement No ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. The work is partially funded by the Spanish Government (ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Comparative study of the thermal performance of four different shell-and-tube heat exchangers used as latent heat thermal energy storage systems

  • Gasia, Jaume
  • Diriken, Jan
  • Bourke, Malcolm
  • Van Bael, Johan
  • Cabeza, Luisa F.
In this paper, the influence of the addition of fins and the use of two different heat transfer fluids (water and a commercial silicone) have been experimentally tested and compared in four latent heat thermal energy storage systems, based on the shell-and-tube heat exchanger concept, using paraffin RT58 as phase change material. Three European institutions were involved under the framework of the MERITS project. A common approach (temperature and power profiles), and five different key performance indicators have been defined and used for the comparison: energy charged, average power, 5-min peak power, peak power to energy ratio, and time. For the same heat transfer fluid, results showed that finned designs (4.7-9.4 times more heat transfer surface) showed an improvement of up to 40%. On the contrary, for the same design, water (which has a specific heat 3 times higher and a thermal conductivity 4.9 times higher than silicone Syltherm 800), yielded results up to 44% higher., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under grant agreement No ENER/FP7/295983 (MERITS) and under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE), and from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B 00092).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Thermophysical characterization and thermal cycling stability of two TCM: CaCl2 and zeolite

  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Cuypers, Ruud
At this moment, the global energy consumption in buildings is around 40% of the total energy consumption in developed countries. Thermal energy storage (TES) is presented as one way to address this energyrelated problem proposing an alternative to reduce the gap between energy supply and energy demand. One way to store energy is using thermochemical materials (TCM). These types of materials allow accumulating energy through a chemical process at low temperature, almost without heat losses. In addition, it is a stable way to perform the heat storage and TCM can be implemented for seasonal storage or/and long term storage. This study compares the cyclability, from the thermophysical point of view, CaCl2 which follows a chemical reaction and zeolite which follows a sorption process to be used as TCM for seasonal/long term storage. The main results show that the chemical reaction TCM is more energy-efficient than the sorption TCM. The CaCl2 calculated energy density is 1.47 GJ/m3 , being the best option to be considered to be used as TCM, even though the dehydration process of the zeolite is simpler and it occurs at higher temperatures its calculated energy density is only 0.2 GJ/m3 ., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/ 2007-2013) under grant agreement No ENER/FP7/1295983 (MERITS) and under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE). Furthermore, the work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011- 22722), and the European Union by Cost Action TU0802. The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

IEA SHC Task 42 / ECES Annex 29 WG A1: Engineering and Processing of PCMs, TCMs and Sorption Materials

  • Ristić, Alenka
  • Furbo, Simon
  • Moser, Christoph
  • Schranzhofer, Hermann
  • Lazaro, Ana
  • Delgado, Mónica
  • Peñalosa, Conchita
  • Zalewski, Laurent
  • Diarce, Gonzalo
  • Alkan, Cemil
  • Gunasekara, Saman N.
  • Haussmann, Thomas
  • Gschwander, Stefan
  • Rathgeber, Christoph
  • Schmit, Henri
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Ferrer, Gerard
  • Konuklu, Yeliz
  • Paksoy, Halime
  • Rammelberg, Holger
  • Munz, Gunther
  • Herzog, Thomas
  • Jänchen, Jochen
  • Palomo, Elena
Proceedings of the 4th International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2015), An overview on the recent results on the engineering and characterization of sorption materials, PCMs and TCMs investigated in the working group WG A1 “Engineering and processing of TES materials” of IEA SHC Task 42 / ECES Annex 29 (Task 4229) entitled “Compact Thermal Energy Storage” is presented., The financial supports of the European Commission for subsidizing SAM.SSA, COMTES, MERITS projects within the 7th framework program for research are acknowledged. The Slovenian Research Agency (research program P1-0021-0104 and bilateral project BI-FR/14-15-Proteus- 008) is thanked for the support.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Experimental evaluation of a paraffin as phase change material for thermal energy storage in laboratory equipment and in a shell-and-tube heat exchanger

  • Gasia, Jaume
  • Miró, Laia
  • Gracia Cuesta, Alvaro de
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
The thermal behavior of a commercial paraffin with a melting temperature of 58 ºC is analyzed as a phase change material (PCM) candidate for industrial waste heat recovery and domestic hot water applications. A full and complete characterization of this PCM is performed based on two different approaches: a laboratory characterization (mass range of milligrams) and an analysis in a pilot plant (mass range of kilograms). In the laboratory characterization, its thermal and cycling stability, its health hazard as well as its phase change thermal range, enthalpy and specific heat are analyzed using a differential scanning calorimeter, thermogravimetric analysis, thermocycling and infrared spectroscopy. Laboratory analyses showed its suitability up to 80 ºC and for 1200 cycles. In the pilot plant analysis, its thermal behavior was analyzed in a shell-and-tube heat exchanger under different heat transfer fluid mass flow rates in terms of temperature, power and energy rates. Results from the pilot plant analysis allowed understanding the different methods of heat transfer in real charging and discharging processes as well as the influence of the geometry of the tank on the energy transferred and required time for charging and discharging processes., The work is partially funded by the Spanish government (ULLE10-4E-1305, ENE2015- 64117-C5-1-R and ENE2015-64117-C5-3-R). This project has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement N PIRSES-GA-2013-610692 (INNOSTORAGE) and No ENER/FP7/295983 (MERITS), and from the European Union’s Horizon 2020 Research and Innovation Programme under Grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2016FI_B 00047). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Alvaro de Gracia and Camila Barreneche would like to thank the Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion of metals and salt hydrates used for thermochemical energy storage

  • Solé, Aran
  • Miró, Laia
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Solar energy can be efficiently used if thermal energy storage systems are accordingly designed to match availability and demand. Thermal energy storage by thermochemical materials (TCM) is very attractive since these materials present a high storage density. Therefore, compact systems can be designed to provide both heating and cooling in dwellings. One of the main drawbacks of the TCM is corrosion with metals in contact. Hence, the objective of this study is to present the obtained results of an immersion corrosion test following ASTM G1 simulating an open TCM reactor, under humidity and temperature defined conditions. Four common metals: copper, aluminum, stainless steel 316, and carbon steel, and five TCM: CaCl2, Na2S, CaO, MgSO4, and MgCl2, were studied. Aluminum and copper show severe corrosion when combined with Na2S, aluminum corrosion is more significant since the specimen was totally destroyed after 3 weeks. Stainless steel 316 is recommended to be used as a metal container material when storing all tested TCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement no ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. Laia Miró would like to thank the Spanish Government for her training researcher personal fellowship (BES-2012-051861). The work is partially funded by the Spanish Government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

New database to select phase change materials: chemical nature, properties, and applications

  • Barreneche Güerisoli, Camila
  • Navarro, Maria E.
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
Today, thermal energy storage materials are proposed as a promising solution to increase the energy efficiency in building sector and to reduce the total energy demand because building sector accounts up to 34% of total energy consumption. Under this situation, phase change materials (PCM) are well-considered as materials to store energy allowing high energy densities (between 50 and 600 MJ/cm3). Available materials to be used as PCM for building application in literature were added to a database for to be used with CES Selector software. More than three hundred PCM whit phase change temperatures between −50 °C and 150 °C and considering commercial and non-commercial PCM were listed and classified by their properties and the values available of the materials have been introduced in this database. The main objective of this study is to generate a PCM database and draw on it in order to facilitate the selection of the most suitable PCM depending on the building application., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/ 2007-2013) under grant agreement no. ENER/FP7/1295983 (MERITS) and under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE). Furthermore, the work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Corrosion test of salt hydrates and vessel metals for thermochemical energy storage

  • Solé, Aran
  • Miró, Laia
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Among all thermochemical materials for thermal energy storage salt hydrates seem to be the most promising ones. Salt hydrates present the highest energy densities, but their main drawback is their bad compatibility with some container materials, such as metals. To control the corrosion effect it is necessary to perform and evaluate experimental tests. The main goal of this paper is to show experimental results of corrosion test between the most used salt hydrates for thermochemical energy storage and the most common vessel metals., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement No ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. Laia Miró would like to thank the Spanish Government for her training researcher personal fellowship (BES-2012-051861).The work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2009 SGR 534) and research group DIOPMA (2009 SGR 645).
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage

  • Solé, Aran
  • Barreneche, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermochemical materials (TCM) can be used for seasonal heat storage, storing high amounts of thermal energy coming from the sun in summer and releasing it in winter, when heating for houses is needed. One promising TCM for building comfort applications is the Na2S/water pair due to its high energy density and appropriate reaction temperature that can be achieved by a solar collector. Nonetheless, Na2S reacts with oxygen and is corrosive to metals, especially with those used to build up heat exchangers or reactors that contain the TCM. Therefore, corrosion tests in a self-developed experimental setup under vacuum conditions, 13 mbar, between Na2S·9H2O/5H2O and two reactor metals - copper and stainless steel 316 - have been performed. Since copper is corroded and is highly used for thermochemical reactors, two promising coatings, Halar and electroless nickel, have been applied. Furthermore, aluminium has also been tested coated with these coatings. Halar is a potential candidate to protect both copper and aluminium heat exchangers/reactor that may contain Na2S/H2O pair for thermochemical energy storage. Stainless steel 316 is also corrosion resistant to the selected TCM.
Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Thermophysical characterization and thermal cycling stability of two TCM: CaCl2 and zeolite

  • Barreneche, Camila
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Cuypers, Ruud
At this moment, the global energy consumption in buildings is around 40% of the total energy consumption in developed countries. Thermal energy storage (TES) is presented as one way to address this energy-related problem proposing an alternative to reduce the gap between energy supply and energy demand. One way to store energy is using thermochemical materials (TCM). These types of materials allow accumulating energy through a chemical process at low temperature, almost without heat losses. In addition, it is a stable way to perform the heat storage and TCM can be implemented for seasonal storage or/and long term storage. This study compares the cyclability, from the thermophysical point of view, CaCl2 which follows a chemical reaction and zeolite which follows a sorption process to be used as TCM for seasonal/long term storage. The main results show that the chemical reaction TCM is more energy-efficient than the sorption TCM. The CaCl2 calculated energy density is 1.47 GJ/m3, being the best option to be considered to be used as TCM, even though the dehydration process of the zeolite is simpler and it occurs at higher temperatures its calculated energy density is only 0.2 GJ/m3.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

IEA SHC Task 42 / ECES Annex 29 - Working Group B: Applications of Compact Thermal Energy Storage

  • Van Helden, W
  • Yamaha, M
  • Rathgeber, C
  • Hauer, A
  • Huaylla, F
  • Le Pierrès, N
  • Stutz, B
  • Mette, B
  • Dolado, P
  • Lazaro, A
  • Mazo, J
  • Dannemand, M
  • Furbo, S
  • Campos-Celador, A
  • , Diarce, G
  • Cuypers, R
  • König-Haagen, A
  • Höhlein, S
  • Brüggemann, D
  • Fumey, B
  • Weber, R
  • Köll, R
  • Wagner, W
  • Daguenet-Frick, X
  • Gantenbein, P
  • Kuznik, F
The IEA joint Task 42 / Annex 29 is aimed at developing compact thermal energy storage materials and systems. In Working Group B, experts are working on the development of compact thermal energy storage applications, in the areas cooling, domestic heating and hot water and industry. The majority of application projects were in the field of room heating and domestic hot water. In this article, an overview is given of a large number of applications. The storage technologies used in the applications are latent heat storage, open and closed solid sorption, liquid sorption and salt hydrates and composites thereof. On a broad front, a lot of progress was made in the development of components and systems, providing knowledge and experience regarding the design, numerical modeling, building, testing and economical assessing of components and storage systems. Most important findings are that the interaction of storage materials with the materials of components can be deciding for the technical feasibility, that a number of components, like reactor, heat exchangers and evaporators are less understood than initially thought and need more development, that the inclusion of storage materials in systems generate new challenges like the occurrence of non-condensable gases and thermo-mechanical effects and that standardized and simplified system approaches are needed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

IEA SHC Task 42 / ECES Annex 29 WG A1: Engineering and Processing of PCMs, TCMs and Sorption Materials

  • Ristic, A
  • Furbo, S
  • Moser, C
  • Schranzhofer, H
  • Lazaro, A
  • Delgado, M
  • Peñalosa, C
  • Zalewski, L
  • Diarce, G
  • Alkan, C
  • Gunasekara, S.N
  • Haussmann, T
  • Gschwander, S
  • Rathgeber, C
  • Schmit, H
  • , Barreneche, C
  • Cabeza, L
  • Ferrer, G
  • Konuklu, Y
  • Paksoy, H
  • Rammelberg, H
  • Munz, G
  • Herzog, T
  • Jänchen, J
  • Barrio, E.P.D
An overview on the recent results on the engineering and characterization of sorption materials, PCMs and TCMs investigated in the working group WG A1 "Engineering and processing of TES materials" of IEA SHC Task 42 / ECES Annex 29 (Task 4229) entitled "Compact Thermal Energy Storage" is presented.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermophysical characterization and thermal cycling stability of two TCM: CaCl2 and zeolite

  • Barreneche, Camila
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Cuypers, Ruud
At this moment, the global energy consumption in buildings is around 40% of the total energy consumption in developed countries. Thermal energy storage (TES) is presented as one way to address this energy-related problem proposing an alternative to reduce the gap between energy supply and energy demand. One way to store energy is using thermochemical materials (TCM). These types of materials allow accumulating energy through a chemical process at low temperature, almost without heat losses. In addition, it is a stable way to perform the heat storage and TCM can be implemented for seasonal storage or/and long term storage. This study compares the cyclability, from the thermophysical point of view, CaCl2 which follows a chemical reaction and zeolite which follows a sorption process to be used as TCM for seasonal/long term storage. The main results show that the chemical reaction TCM is more energy-efficient than the sorption TCM. The CaCl2 calculated energy density is 1.47 GJ/m3, being the best option to be considered to be used as TCM, even though the dehydration process of the zeolite is simpler and it occurs at higher temperatures its calculated energy density is only 0.2 GJ/m3.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

IEA SHC Task 42 / ECES Annex 29 WG A1: Engineering and Processing of PCMs, TCMs and Sorption Materials

  • Ristić, Alenka
  • Furbo, Simon
  • Moser, Christoph
  • Schranzhofer, Hermann
  • Lazaro, Ana
  • Delgado, Mónica
  • Peñalosa, Conchita
  • Zalewski, Laurent
  • Diarce, Gonzalo
  • Alkan, Cemil
  • Gunasekara, Saman N.
  • Haussmann, Thomas
  • Gschwander, Stefan
  • Rathgeber, Christoph
  • Schmit, Henri
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
  • Ferrer, Gerard
  • Konuklu, Yeliz
  • Paksoy, Halime
  • Rammelberg, Holger
  • Munz, Gunther
  • Herzog, Thomas
  • Jänchen, Jochen
  • Palomo, Elena
Proceedings of the 4th International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2015), An overview on the recent results on the engineering and characterization of sorption materials, PCMs and TCMs investigated in the working group WG A1 “Engineering and processing of TES materials” of IEA SHC Task 42 / ECES Annex 29 (Task 4229) entitled “Compact Thermal Energy Storage” is presented., The financial supports of the European Commission for subsidizing SAM.SSA, COMTES, MERITS projects within the 7th framework program for research are acknowledged. The Slovenian Research Agency (research program P1-0021-0104 and bilateral project BI-FR/14-15-Proteus- 008) is thanked for the support.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage

  • Solé, Aran
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermochemical materials (TCM) can be used for seasonal heat storage, storing high amounts of thermal energy coming from the sun in summer and releasing it in winter, when heating for houses is needed. One promising TCM for building comfort applications is the Na2S/water pair due to its high energy density and appropriate reaction temperature that can be achieved by a solar collector. Nonetheless, Na2S reacts with oxygen and is corrosive to metals, especially with those used to build up heat exchangers or reactors that contain the TCM. Therefore, corrosion tests in a self-developed experimental setup under vacuum conditions, 13 mbar, between Na2S⋅9H2O/5H2O and two reactor metals – copper and stainless steel 316 – have been performed. Since copper is corroded and is highly used for thermochemical reactors, two promising coatings, Halar and electroless nickel, have been applied. Furthermore, aluminium has also been tested coated with these coatings. Halar is a potential candidate to protect both copper and aluminium heat exchangers/reactor that may contain Na2S/H2O pair for thermochemical energy storage. Stainless steel 316 is also corrosion resistant to the selected TCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant Agreement No ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. The work is partially funded by the Spanish Government (ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Experimental evaluation of a paraffin as phase change material for thermal energy storage in laboratory equipment and in a shell-and-tube heat exchanger

  • Gasia, Jaume
  • Miró, Laia
  • Gracia Cuesta, Alvaro de
  • Barreneche Güerisoli, Camila
  • Cabeza, Luisa F.
The thermal behavior of a commercial paraffin with a melting temperature of 58 ºC is analyzed as a phase change material (PCM) candidate for industrial waste heat recovery and domestic hot water applications. A full and complete characterization of this PCM is performed based on two different approaches: a laboratory characterization (mass range of milligrams) and an analysis in a pilot plant (mass range of kilograms). In the laboratory characterization, its thermal and cycling stability, its health hazard as well as its phase change thermal range, enthalpy and specific heat are analyzed using a differential scanning calorimeter, thermogravimetric analysis, thermocycling and infrared spectroscopy. Laboratory analyses showed its suitability up to 80 ºC and for 1200 cycles. In the pilot plant analysis, its thermal behavior was analyzed in a shell-and-tube heat exchanger under different heat transfer fluid mass flow rates in terms of temperature, power and energy rates. Results from the pilot plant analysis allowed understanding the different methods of heat transfer in real charging and discharging processes as well as the influence of the geometry of the tank on the energy transferred and required time for charging and discharging processes., The work is partially funded by the Spanish government (ULLE10-4E-1305, ENE2015- 64117-C5-1-R and ENE2015-64117-C5-3-R). This project has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under Grant agreement N PIRSES-GA-2013-610692 (INNOSTORAGE) and No ENER/FP7/295983 (MERITS), and from the European Union’s Horizon 2020 Research and Innovation Programme under Grant agreement No 657466 (INPATH-TES). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2016FI_B 00047). Laia Miró would like to thank the Spanish Government for her research fellowship (BES-2012-051861). Alvaro de Gracia and Camila Barreneche would like to thank the Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940 and FJCI-2014-22886, respectively.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Comparative study of the thermal performance of four different shell-and-tube heat exchangers used as latent heat thermal energy storage systems

  • Gasia, Jaume
  • Diriken, Jan
  • Bourke, Malcolm
  • Van Bael, Johan
  • Cabeza, Luisa F.
In this paper, the influence of the addition of fins and the use of two different heat transfer fluids (water and a commercial silicone) have been experimentally tested and compared in four latent heat thermal energy storage systems, based on the shell-and-tube heat exchanger concept, using paraffin RT58 as phase change material. Three European institutions were involved under the framework of the MERITS project. A common approach (temperature and power profiles), and five different key performance indicators have been defined and used for the comparison: energy charged, average power, 5-min peak power, peak power to energy ratio, and time. For the same heat transfer fluid, results showed that finned designs (4.7-9.4 times more heat transfer surface) showed an improvement of up to 40%. On the contrary, for the same design, water (which has a specific heat 3 times higher and a thermal conductivity 4.9 times higher than silicone Syltherm 800), yielded results up to 44% higher., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007–2013) under grant agreement No ENER/FP7/295983 (MERITS) and under Grant agreement N°PIRSES-GA-2013-610692 (INNOSTORAGE), and from the European Union's Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123). Jaume Gasia would like to thank the Departament d’Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2017FI_B 00092).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermophysical characterization and thermal cycling stability of two TCM: CaCl2 and zeolite

  • Barreneche Güerisoli, Camila
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Cuypers, Ruud
At this moment, the global energy consumption in buildings is around 40% of the total energy consumption in developed countries. Thermal energy storage (TES) is presented as one way to address this energyrelated problem proposing an alternative to reduce the gap between energy supply and energy demand. One way to store energy is using thermochemical materials (TCM). These types of materials allow accumulating energy through a chemical process at low temperature, almost without heat losses. In addition, it is a stable way to perform the heat storage and TCM can be implemented for seasonal storage or/and long term storage. This study compares the cyclability, from the thermophysical point of view, CaCl2 which follows a chemical reaction and zeolite which follows a sorption process to be used as TCM for seasonal/long term storage. The main results show that the chemical reaction TCM is more energy-efficient than the sorption TCM. The CaCl2 calculated energy density is 1.47 GJ/m3 , being the best option to be considered to be used as TCM, even though the dehydration process of the zeolite is simpler and it occurs at higher temperatures its calculated energy density is only 0.2 GJ/m3 ., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/ 2007-2013) under grant agreement No ENER/FP7/1295983 (MERITS) and under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE). Furthermore, the work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011- 22722), and the European Union by Cost Action TU0802. The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Corrosion of metals and salt hydrates used for thermochemical energy storage

  • Solé, Aran
  • Miró, Laia
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Solar energy can be efficiently used if thermal energy storage systems are accordingly designed to match availability and demand. Thermal energy storage by thermochemical materials (TCM) is very attractive since these materials present a high storage density. Therefore, compact systems can be designed to provide both heating and cooling in dwellings. One of the main drawbacks of the TCM is corrosion with metals in contact. Hence, the objective of this study is to present the obtained results of an immersion corrosion test following ASTM G1 simulating an open TCM reactor, under humidity and temperature defined conditions. Four common metals: copper, aluminum, stainless steel 316, and carbon steel, and five TCM: CaCl2, Na2S, CaO, MgSO4, and MgCl2, were studied. Aluminum and copper show severe corrosion when combined with Na2S, aluminum corrosion is more significant since the specimen was totally destroyed after 3 weeks. Stainless steel 316 is recommended to be used as a metal container material when storing all tested TCM., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement no ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. Laia Miró would like to thank the Spanish Government for her training researcher personal fellowship (BES-2012-051861). The work is partially funded by the Spanish Government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to the research group GREA (2014 SGR 123).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

New database to select phase change materials: chemical nature, properties, and applications

  • Barreneche Güerisoli, Camila
  • Navarro, Maria E.
  • Cabeza, Luisa F.
  • Fernández Renna, Ana Inés
Today, thermal energy storage materials are proposed as a promising solution to increase the energy efficiency in building sector and to reduce the total energy demand because building sector accounts up to 34% of total energy consumption. Under this situation, phase change materials (PCM) are well-considered as materials to store energy allowing high energy densities (between 50 and 600 MJ/cm3). Available materials to be used as PCM for building application in literature were added to a database for to be used with CES Selector software. More than three hundred PCM whit phase change temperatures between −50 °C and 150 °C and considering commercial and non-commercial PCM were listed and classified by their properties and the values available of the materials have been introduced in this database. The main objective of this study is to generate a PCM database and draw on it in order to facilitate the selection of the most suitable PCM depending on the building application., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/ 2007-2013) under grant agreement no. ENER/FP7/1295983 (MERITS) and under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE). Furthermore, the work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2014 SGR 123) and DIOPMA (2014 SGR 1543).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage

  • Solé, Aran
  • Barreneche, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Thermochemical materials (TCM) can be used for seasonal heat storage, storing high amounts of thermal energy coming from the sun in summer and releasing it in winter, when heating for houses is needed. One promising TCM for building comfort applications is the Na2S/water pair due to its high energy density and appropriate reaction temperature that can be achieved by a solar collector. Nonetheless, Na2S reacts with oxygen and is corrosive to metals, especially with those used to build up heat exchangers or reactors that contain the TCM. Therefore, corrosion tests in a self-developed experimental setup under vacuum conditions, 13 mbar, between Na2S·9H2O/5H2O and two reactor metals - copper and stainless steel 316 - have been performed. Since copper is corroded and is highly used for thermochemical reactors, two promising coatings, Halar and electroless nickel, have been applied. Furthermore, aluminium has also been tested coated with these coatings. Halar is a potential candidate to protect both copper and aluminium heat exchangers/reactor that may contain Na2S/H2O pair for thermochemical energy storage. Stainless steel 316 is also corrosion resistant to the selected TCM.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Corrosion test of salt hydrates and vessel metals for thermochemical energy storage

  • Solé, Aran
  • Miró, Laia
  • Barreneche Güerisoli, Camila
  • Martorell, Ingrid
  • Cabeza, Luisa F.
Among all thermochemical materials for thermal energy storage salt hydrates seem to be the most promising ones. Salt hydrates present the highest energy densities, but their main drawback is their bad compatibility with some container materials, such as metals. To control the corrosion effect it is necessary to perform and evaluate experimental tests. The main goal of this paper is to show experimental results of corrosion test between the most used salt hydrates for thermochemical energy storage and the most common vessel metals., The research leading to these results has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement No ENER/FP7/295983 (MERITS). Aran Solé would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for her research fellowship. Laia Miró would like to thank the Spanish Government for her training researcher personal fellowship (BES-2012-051861).The work is partially funded by the Spanish government (ENE2011-28269-C03-02 and ENE2011-22722). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREA (2009 SGR 534) and research group DIOPMA (2009 SGR 645).