Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Effect of Chemical Structure and Salt Concentration on the Crystallization and Ionic Conductivity of Aliphatic Polyethers

  • Olmedo Martínez, Jorge L.
  • Meabe Iturbe, Leire
  • Basterrechea Gorostiza, Andere
  • Mecerreyes Molero, David
  • Müller Sánchez, Alejandro Jesús
Poly(ethylene oxide) (PEO) is the most widely used polymer in the field of solid polymer electrolytes for batteries. It is well known that the crystallinity of polymer electrolytes strongly affects the ionic conductivity and its electrochemical performance. Nowadays, alternatives to PEO are actively researched in the battery community, showing higher ionic conductivity, electrochemical window, or working temperature range. In this work, we investigated polymer electrolytes based on aliphatic polyethers with a number of methylene units ranging from 2 to 12. Thus, the effect of the lithium bis(trifluoromethanesulfone) imide (LiTFSI) concentration on the crystallization behavior of the new aliphatic polyethers and their ionic conductivity was investigated. In all the cases, the degree of crystallinity and the overall crystallization rate of the polymers decreased drastically with 30 wt % LiTFSI addition. The salt acted as a low molecular diluent to the polyethers according to the expectation of the Flory-Huggins theory for polymer-diluent mixtures. By fitting our results to this theory, the value of the interaction energy density (B) between the polyether and the LiTFSI was calculated, and we show that the value of B must be small to obtain high ionic conductivity electrolytes., We wish to thank the National Council of Science and Technology (CONACYT), Mexico for the grant awarded to Jorge L. Olmedo Martinez (471837). We are grateful to the financial support of the European Commission through the project SUSPOL-EJD 642671 and European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250. Alejandro J. Muller acknowledges the support of MINECO through grant MAT2017-83014-C2-1-P. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico antes de ser publicado, versión del autor (Preprint)

UV-cross-linked poly(ethylene oxide carbonate) as free standing solid polymer electrolyte for lithium batteries

  • Meabe Iturbe, Leire
  • Huynh, Tan Vu
  • Mantione, Daniele
  • Porcarelli, Luca
  • Li, Chunmei
  • O'Dell, Luke A.
  • Sardon Muguruza, Haritz
  • Armand, Michel
  • Forsyth, Maria
  • Mecerreyes Molero, David
The supporting information is attached., Aliphatic polycarbonates have emerged as promising polymer electrolytes due to their combination of moderate ionic conductivity and high lithium transference numbers. However, the mechanical properties of the aliphatic polycarbonates polymer electrolytes are usually weak due to the low molecular weight achieved and plasticization effect of the added lithium salt. In this article, we present a copolymer having poly(ethylene oxide) segments linked by carbonate groups with cross-linkable methacrylic pendant groups. Once the polymer and the lithium salt were mixed, the poly(ethylene oxide carbonate) was cross-linked by UV light producing a free standing solid polymer electrolyte (SPE). Different SPE formulations were designed by varying the LiTFSI concentration within the polymer matrix showing the highest ionic conductivity of 1.3·10−3 S cm−1 and a lithium transference number of 0.59 at 70 °C. 7Li solid-state NMR experiments were used to correlate the lithium cation environment and dynamics with ionic conductivity. At the same temperature the electrochemical stability window was analyzed, and a reasonable value of 4.9 V was achieved. The study was complemented by mechanical and thermal stability measurements. Finally, the optimized UV-cross-linked poly(ethylene oxide carbonate) was tested as electrolyte in lithium metal symmetric cell at 70 °C, showing low over-potential values and a stable solid electrolyte interphase layer., We are grateful to the financial support of the European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 and the Basque Government through ETORTEK Energigune 2013 and IT 999-16. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU fellowship received to carry out this work. The authors would like to thank the European Commission for their financial support through the project SUSPOL-EJD 642671 and the Gobierno Vasco/Eusko Jaurlaritza (IT 999-16). The authors thank for technical and human support provided by SGIker of UPV/EHU for the NMR facilities of Gipuzkoa campus.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

CO2-sourced polycarbonates as solid electrolytes for room temperature operating lithium batteries

  • Ouhib, Farid
  • Meabe Iturbe, Leire
  • Mahmoud, Abdelfattah
  • Eshraghi, Nicolas
  • Grignard, Bruno
  • Thomassin, Jean-Michel
  • Aqil, Abdelhafid
  • Boschini, Frederic
  • Jérôme, Christine
  • Mecerreyes Molero, David
  • Detrembleur, Christophe
In the last few years, polycarbonates have been identified as alternatives to poly(ethylene oxide) as polymer electrolytes for lithium battery applications. In this work, we show the design of CO2-sourced polycarbonates for their use in room temperature operating lithium batteries. Novel functional polycarbonates with alternating oxo-carbonate moieties and polyethylene oxide segments are synthesized by the facile room temperature (rt) organocatalyzed polyaddition of CO2-sourced bis(aalkylidene carbonate)s (bis-aCCs) with polyethylene oxide diols. The effect of the molar mass of olyethylene oxide on the ionic conductivity and thermal properties of poly(oxo-carbonate)s is investigated. The best candidate shows a low glass transition temperature of 44 C and a high ionic conductivity of 3.75 10 5 S cm 1 at rt when loaded with 30 wt% bis(trifluoromethanesulfonyl)imide salt (LiTFSI) without any solvent. An all-solid semi-interpenetrated network polymer electrolyte (SIN-SPE) is then fabricated by UV cross-linking of a mixture containing specifically designed poly(oxo-carbonate) bearing methacrylate pendants, diethylene glycol diacrylate and the previously described poly(oxocarbonate) containing LiTFSI. The resulting self-standing membrane exhibits a high oxidation stability up to 5 V (vs. Li/Li+), an ionic conductivity of 1.1 10 5 S cm 1 at rt (10 4 S cm 1 at 60 C) and promising mechanical properties. Assembled in a half cell configuration with LiFePO4 (LFP) as the cathode and lithium as the anode, the all-solid cell delivers a discharge capacity of 161 mA h g 1 at 0.1C and 60 C, which is very close to the theoretical capacity of LFP (170 mA h g 1). Also, a stable reversible cycling capacity over 400 cycles with a high coulombic efficiency of 99% is noted at 1C. Similar results are obtained at rt provided that 10 wt% tetraglyme as a plasticizer was added to the SIN-SPE., -Fonds National pour la Recherche Scientifique” (F.R.S.-FNRS) -Fonds Wetenschappelijk Onderzoek– Vlaanderen (FWO) -EOS project no. 019618F (ID EOS: 30902231). - CESAM Research Unit. - European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 -Basque Government through ETORTEK Energigune 2013 and IT 999-16. - Spanish Ministry of Education, Culture and Sport for the predoctoral FPU fellowship received
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Innovative Electrolytes Based on Ionic Liquids and Polymers for Next-Generation Solid-State Batteries

  • Forsyth, Maria
  • Porcarelli, Luca
  • Wang, Xiaoen
  • Goujon, Nicolas
  • Mecerreyes Molero, David
Unformatted postprint, Electrolytes based on organic solvents used in current Li-ion batteries are not compatible with the next-generation energy storage technologies including those based on Li metal. Thus, there has been an increase in research activities investigating solid-state electrolytes, ionic liquids (ILs), polymers, and combinations of these. This Account will discuss some of the work from our teams in these areas. Similarly, other metal-based technologies including Na, Mg, Zn, and Al, for example, are being considered as alternatives to Li-based energy storage. However, the materials research required to effectively enable these alkali metal based energy storage applications is still in its relative infancy. Once again, electrolytes play a significant role in enabling these devices, and research has for the most part progressed along similar lines to that in advanced lithium technologies. Some of our recent contributions in these areas will also be discussed, along with our perspective on future directions in this field. For example, one approach has been to develop single-ion conductors, where the anion is tethered to the polymer backbone, and the dominant charge conductor is the lithium or sodium countercation. Typically, these present with low conductivity, whereas by using a copolymer approach or incorporating bulky quaternary ammonium co-cations, the effective charge separation is increased thus leading to higher conductivities and greater mobility of the alkali metal cation. This has been demonstrated both experimentally and via computer simulations. Further enhancements in ion transport may be possible in the future by designing and tethering more weakly associating anions to the polymer backbone. The second approach considers ion gels or composite polymer electrolytes where a polymerized ionic liquid is the matrix that provides both mechanical robustness and ion conducting pathways. The block copolymer approach is also demonstrated, in this case, to simultaneously provide mechanical properties and high ionic conductivity when used in combination with ionic-liquid electrolytes. The ultimate electrolyte material that will enable all high-performance solid-state batteries will have ion transport decoupled from the mechanical properties. While inorganic conductors can achieve this, their rigid, brittle nature creates difficulties. On the other hand, ionic polymers and their composites provide a rich area of chemistry to design and tune high ionic conductivity together with ideal mechanical properties., The authors are grateful to Prof. Michel Armand, Prof. Douglas MacFarlane, Prof. Patrick Howlett, Dr. John Chiefari, and Mr. Asier Fernandez De Añastro for helpful discussions and their assistance during the preparation of this manuscript. L.P. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 797295. D.M. has received funding from the European Research Council under the F7P grant agreement No 306250. M.F. would like to acknowledge the financial supports through Australia-India Strategic Research Fund (AISRF 48515), ARC Australian Laureate Fellowship (grant agreement No FL110100013) and ARC Centre of Excellence for Electromaterials Science (grant agreement No CE140100012).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Reseña (Review)

3D Scaffolds Based on Conductive Polymers for Biomedical Applications

  • Alegret Ramón, Nuria
  • Domínguez Alfaro, Antonio
  • Mecerreyes Molero, David
Unformatted postprint., 3D scaffolds appear to be a cost-effective ultimate answer for biomedical applications, facilitating rapid results while providing an environment similar to in vivo tissue. These biomaterials offer large surface areas for cell or biomaterial attachment, proliferation, biosensing and drug delivery applications. Among 3D scaffolds, the ones based on conjugated polymers (CPs) and natural nonconductive polymers arranged in a 3D architecture provide tridimensionality to cellular culture along with a high surface area for cell adherence and proliferation as well electrical conductivity for stimulation or sensing. However, the scaffolds must also obey other characteristics: homogeneous porosity, with pore sizes large enough to allow cell penetration and nutrient flow; elasticity and wettability similar to the tissue of implantation; and a suitable composition to enhance cell− matrix interactions. In this Review, we summarize the fabrication methods, characterization techniques and main applications of conductive 3D scaffolds based on conductive polymers. The main barrier in the development of these platforms has been the fabrication and subsequent maintenance of the third dimension due to challenges in the manipulation of conductive polymers. In the last decades, different approaches to overcome these barriers have been developed for the production of conductive 3D scaffolds, demonstrating a huge potential for biomedical purposes. Finally, we present an overview of the emerging strategies developed to manufacture 3D conductive scaffolds, the techniques used to fully characterize them, and the biomedical fields where they have been applied., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 753293, acronym NanoBEAT, and European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Single-ion conducting poly(ethylene oxide carbonate) as solid polymer electrolyte for lithium batteries

  • Meabe Iturbe, Leire
  • Goujon, Nicolas
  • Li, Chunmei
  • Armand, Michel
  • Forsyth, Maria
  • Mecerreyes Molero, David
Unformatted postprint, Single-ion conducting polymer electrolytes (SIPE) have attracted a lot of interest for application in high energy density lithium metal batteries. SIPEs possess lithium transport numbers close to unity, which does not provoke concentration gradients and holds the promise of limiting lithium dendrite formation. In this article, we have optimized a single-ion polymer incorporating the most successful chemical units in polymer electrolytes, such as ethylene oxide, carbonate and a lithium sulfonimide. This single-ion poly(ethylene oxide carbonate) copolymer was synthesized by polycondensation between polyethylene glycol, dimethyl carbonate and a functional diol including the pendant sulfonamide anionic group and the lithium counter-cation. By playing with the monomer stoichiometry, the crystallinity and ionic conductivity were optimized. The best copolymer showed high ionic conductivity values of 1.2·10-4 S.cm-1 at 70 °C. Lithium interactions and mobility were studied by lithium pulsed field gradient, lithium diffusion, NMR relaxation time measurements and FTIR-ATR analysis. High lithium mobility is observed which is due to the weakly coordinating chemical environment in the polymer and also that the sulfonamide in the SIPE adopts to a greater extent the cis conformation, which is known to promote lithium mobility. Finally, the performance of the singe-ion conducting poly(ethylene oxide carbonate) was compared in lithium symmetric cells versus an analogous conventional salt in polymer electrolyte, showing improved performance in lithium plating and stripping., We are grateful to the financial support of the European Research Council by the Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 and IONBIKE (H2020-MSCA-RISE-2018-823989), and by the Basque Government through ETORTEK Energigune 2013 and IT 999-16. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU fellowship received to carry out this work. The authors thank for the technical and human support provided by SGIker of UPV/EHU for the NMR facilities of Gipuzkoa campus. The authors thank also Dr. Jose Ignacio Miranda (SGIker) for useful and essential support. Authors would like to thank the human support of Dr. Haijin Zhu and Dr. Luke O’Dell.