Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Task-Specific Phosphonium Iongels by Fast UV-Photopolymerization for Solid-State Sodium Metal Batteries

  • Porcarelli, Luca
  • Olmedo Martínez, Jorge L.
  • Sutton, Preston
  • Bocharova, Vera
  • Fernández De Añastro Arrieta, Asier
  • Galcerán, Montserrat
  • Sokolov, Alexei P.
  • Howlett, Patrick C.
  • Forsyth, Maria
  • Mecerreyes Molero, David
Sodium metal batteries are an emerging technology that shows promise in terms of materials availability with respect to lithium batteries. Solid electrolytes are needed to tackle the safety issues related to sodium metal. In this work, a simple method to prepare a mechanically robust and efficient soft solid electrolyte for sodium batteries is demonstrated. A task-specific iongel electrolyte was prepared by combining in a simple process the excellent performance of sodium metal electrodes of an ionic liquid electrolyte and the mechanical properties of polymers. The iongel was synthesized by fast (<1 min) UV photopolymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of a saturated 42%mol solution of sodium bis(fluorosulfonyl)imide (NaFSI) in trimethyl iso-butyl phosphonium bis(fluorosulfonyl)imide (P111i4FSI). The resulting soft solid electrolytes showed high ionic conductivity at room temperature (≥10−3 S cm−1) and tunable storage modulus (104–107 Pa). Iongel with the best ionic conductivity and good mechanical properties (Iongel10) showed excellent battery performance: Na/iongel/NaFePO4 full cells delivered a high specific capacity of 140 mAh g−1 at 0.1 C and 120 mAh g−1 at 1 C with good capacity retention after 30 cycles., L.P. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska–Curie grant agreement No. 797295. P.S. has been funded by the SNSF (Swiss National Science Foundation) under project number P2FRP2_191846. D.M., M.G., and A.F.A. acknowledge the funding by the Basque Government through Elkartek KK-2020/00078 and Agencia Estatal de Investigación (PLEC2021-007929). D.M. and M.G. also acknowledge the funding by Agencia Estatal de Investigación (PID2020-119026GB-100 and PID2019-107468RB-C22), respectively. A.P.S. acknowledges financial support for dielectric measurements and data discussions by NSF (award CHE-2102425).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Synthesis of Redox Polymer Nanoparticles Based on Poly(vinylcatechols) and Their Electroactivity

  • Pirnat, Klemen
  • Casado Pérez, Nerea
  • Porcarelli, Luca
  • Ballard, Nicholas
  • Mecerreyes Molero, David
Organic materials are being investigated as an alternative to inorganic cathodes in lithium batteries with the promise of higher sustainability as well as increased theoretical capacity. Among organic materials, redox polymers based on poly(vinyl catechol) presenting the catechol/o-benzoquinone redox pair show high energy storage potential. Our main motivation in this work was to prepare polymer nanoparticles of different sizes and study their redox properties. As linear polymers are usually soluble/mechanically unstable, we prepared cross-linked polymers to maintain the size of the nanoparticles in different electrolytes. (Mini)emulsion polymerization of two dimethoxy monomers was used to synthesize spherical polymer nanoparticles cross-linked with divinylbenzene (DVB) where the size was controlled by changing the concentration of the surfactant. Deprotection yielded poly(4-vinyl catechol) and poly(3-vinyl catechol) redox active nanoparticles (RPNs) of sizes ranging between 40 and 330 nm as characterized by scanning electron microscopy. The electrochemical properties of the RPN were tested in aqueous- and acetonitrile-based electrolytes using cyclic voltammetry. First the effect of the nanoparticle size and the cross-linker content in the electrochemical properties was investigated. Particle size did not have a crucial effect on the electrochemistry and only the biggest 330 nm RPN showed slightly diminished electrochemical properties. The cross-linker had a negative effect on the maximum reduction current (iC) but improved cycling stability. Based on these results we decided to use the smallest 40 nm nanoparticles with the lowest (1% DVB) cross-linker content for further electrochemical testing. Both RPN isomers showed reversible behavior in aqueous acidic-, neutral-, as well as in acetonitrile-based electrolyte. Poly(4-vinyl catechol)-based RPN had slightly higher reduction potential at 0.45 V versus Ag/AgCl (0.1 M HClO4) compared to another isomer with 0.40 V versus Ag/AgCl. When switching from an acidic aqueous electrolyte to neutral, the redox potential was shifted 440-475 mV to lower values. Because of their high reduction potential and theoretical capacity at 394 mA h/g these synthetic RPNs show promising properties to be used as cathodes in a variety of batteries. However, exact capacity determination, long term cycling, testing in nonaqueous electrolytes, and redox flow batteries needs to be performed in the future., This work was financially supported by the European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 30625 and Slovenian research agency (ARRS): research project J2-8167 and public call MS-ERC-FS/2017-002. N.B. acknowledges the financial support obtained through the Post-Doctoral fellowship Juan de la Cierva-Incorporacion (IJCI-2016-28442), from the Ministry of Economy and Competitiveness of Spain. L.P. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no 797295.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Tuning the Properties of a UV-Polymerized, Cross-Linked Solid Polymer Electrolyte for Lithium Batteries

  • Sutton, Preston
  • Airoldi, Martino
  • Porcarelli, Luca
  • Olmedo Martínez, Jorge L.
  • Mugemana, Clément
  • Bruns, Nico
  • Mecerreyes Molero, David
  • Steiner, Ullrich
  • Gunkel, Ilja
Lithium metal anodes have been pursued for decades as a way to significantly increase the energy density of lithium-ion batteries. However, safety risks caused by flammable liquid electrolytes and short circuits due to lithium dendrite formation during cell cycling have so far prevented the use of lithium metal in commercial batteries. Solid polymer electrolytes (SPEs) offer a potential solution if their mechanical properties and ionic conductivity can be simultaneously engineered. Here, we introduce a family of SPEs that are scalable and easy to prepare with a photopolymerization process, synthesized from amphiphilic acrylic polymer conetworks based on poly(ethylene glycol), 2-hydroxy-ethylacrylate, norbornyl acrylate, and either lithium bis (trifluoromethanesulfonyl) imide (LiTFSI) or a single-ion polymethacrylate as lithium-ion source. Several conetworks were synthesized and cycled, and their ionic conductivity, mechanical properties, and lithium transference number were characterized. A single-ion-conducting polymer electrolyte shows the best compromise between the different properties and extends the calendar life of the cell., This research was funded by Swiss National Science Foundation through the NRP70 program (153764), and the Adolphe Merkle Foundation (P.S., U.S. and I.G.). L.P. has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 797295. N.B. and C.M. acknowledge financial support by the Swiss National Science Foundation (projects PP00P2_144697, PP00P2_172927) and by the KTI/CTI (project 18619.1 PFNM-NM).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Single-Ion Conducting Polymer Nanoparticles as Functional Fillers for Solid Electrolytes in Lithium Metal Batteries

  • Porcarelli, Luca
  • Preston, Sutton
  • Bocharova, Vera
  • Aguirresarobe Hernández, Robert
  • Zhu, Haijin
  • Goujon, Nicolas
  • Leiza Recondo, José Ramón
  • Sokolov, Alexei P.
  • Forsyth, Maria
  • Mecerreyes Molero, David
[EN]Composite solid electrolytes including inorganic nanoparticles or nanofibers which improve the performance of polymer electrolytes due to their superior mechanical, ionic conductivity, or lithium transference number are actively being researched for applications in lithium metal batteries. However, inorganic nanoparticles present limitations such as tedious surface functionalization and agglomeration issues and poor homogeneity at high concentrations in polymer matrixes. In this work, we report on polymer nanoparticles with a lithium sulfonamide surface functionality (LiPNP) for application as electrolytes in lithium metal batteries. The particles are prepared by semibatch emulsion polymerization, an easily up-scalable technique. LiPNPs are used to prepare two different families of particle-reinforced solid electrolytes. When mixed with poly(ethylene oxide) and lithium bis(trifluoromethane)sulfonimide (LiTFSI/PEO), the particles invoke a significant stiffening effect (E' > 106 Pa vs 105 Pa at 80 °C) while the membranes retain high ionic conductivity (sigma = 6.6 * 10-4 S cm-1). Preliminary testing in LiFePO4 lithium metal cells showed promising performance of the PEO nanocomposite electrolytes. By mixing the particles with propylene carbonate without any additional salt, we obtain true single-ion conducting gel electrolytes, as the lithium sulfonamide surface functionalities are the only sources of lithium ions in the system. The gel electrolytes are mechanically robust (up to G' = 106 Pa) and show ionic conductivity up to 10-4 S cm-1. Finally, the PC nanocomposite electrolytes were tested in symmetrical lithium cells. Our findings suggest that all-polymer nanoparticles could represent a new building block material for solid-state lithium metal battery applications., L.P. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska–Curie grant agreement no. 797295. P.S. has been funded by the SNSF (Swiss National Science Foundation) under project number P2FRP2_191846. J.R.L. and D.M. acknowledge the funding by the Basque Government (IT99-16). V.B. acknowledges support from the Laboratory Directed Research and Development Program of Oak Ridge National Laboratory (ORNL), managed by UT-Battelle, LLC, for the U.S. Department of Energy under contract no. DE-AC05-00OR22725. A.S. acknowledges financial support for dielectric measurements and data discussions by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Innovative Electrolytes Based on Ionic Liquids and Polymers for Next-Generation Solid-State Batteries

  • Forsyth, Maria
  • Porcarelli, Luca
  • Wang, Xiaoen
  • Goujon, Nicolas
  • Mecerreyes Molero, David
Unformatted postprint, Electrolytes based on organic solvents used in current Li-ion batteries are not compatible with the next-generation energy storage technologies including those based on Li metal. Thus, there has been an increase in research activities investigating solid-state electrolytes, ionic liquids (ILs), polymers, and combinations of these. This Account will discuss some of the work from our teams in these areas. Similarly, other metal-based technologies including Na, Mg, Zn, and Al, for example, are being considered as alternatives to Li-based energy storage. However, the materials research required to effectively enable these alkali metal based energy storage applications is still in its relative infancy. Once again, electrolytes play a significant role in enabling these devices, and research has for the most part progressed along similar lines to that in advanced lithium technologies. Some of our recent contributions in these areas will also be discussed, along with our perspective on future directions in this field. For example, one approach has been to develop single-ion conductors, where the anion is tethered to the polymer backbone, and the dominant charge conductor is the lithium or sodium countercation. Typically, these present with low conductivity, whereas by using a copolymer approach or incorporating bulky quaternary ammonium co-cations, the effective charge separation is increased thus leading to higher conductivities and greater mobility of the alkali metal cation. This has been demonstrated both experimentally and via computer simulations. Further enhancements in ion transport may be possible in the future by designing and tethering more weakly associating anions to the polymer backbone. The second approach considers ion gels or composite polymer electrolytes where a polymerized ionic liquid is the matrix that provides both mechanical robustness and ion conducting pathways. The block copolymer approach is also demonstrated, in this case, to simultaneously provide mechanical properties and high ionic conductivity when used in combination with ionic-liquid electrolytes. The ultimate electrolyte material that will enable all high-performance solid-state batteries will have ion transport decoupled from the mechanical properties. While inorganic conductors can achieve this, their rigid, brittle nature creates difficulties. On the other hand, ionic polymers and their composites provide a rich area of chemistry to design and tune high ionic conductivity together with ideal mechanical properties., The authors are grateful to Prof. Michel Armand, Prof. Douglas MacFarlane, Prof. Patrick Howlett, Dr. John Chiefari, and Mr. Asier Fernandez De Añastro for helpful discussions and their assistance during the preparation of this manuscript. L.P. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 797295. D.M. has received funding from the European Research Council under the F7P grant agreement No 306250. M.F. would like to acknowledge the financial supports through Australia-India Strategic Research Fund (AISRF 48515), ARC Australian Laureate Fellowship (grant agreement No FL110100013) and ARC Centre of Excellence for Electromaterials Science (grant agreement No CE140100012).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Innovative Polymers for Next‐Generation Batteries

  • Mecerreyes Molero, David
  • Porcarelli, Luca
  • Casado Pérez, Nerea
Unformatted postprint, Lithium-ion batteries are part of modern life, being present in daily-used objects such as mobile phones, tablets, computers, watches, sport accessories, electric scooters, and cars. The next-generation batteries require the development of innovative polymers that help to improve their performance in terms of power density, cyclability, raw materials’ availability, low weight, printability, flexibility, sustainability, or security. This article highlights recent developments in the area of redox-active, electronic/ionic conducting polymers. This includes the development of innovative binders for electrodes, polymer electrolytes, and redox polymers. All these new polymer developments are leading to new battery technologies such as metal–polymer batteries, organic batteries, polymer–air, and redox–flow batteries, which are expected to complement the current lithium-ion technologies in the future., Financial support from the Basque Government, Spanish Government and the European Research Council by Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 is acknowledged. L.P. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska–Curie grant agreement No 797295.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

The influence of interfacial interactions on the conductivity and phase behaviour of organic ionic plastic crystal/polymer nanoparticle composite electrolytes

  • Nti, Frederick
  • Porcarelli, Luca
  • Greene, George W.
  • Zhu, Haijin
  • Makhlooghiazad, Faezeh
  • Mecerreyes Molero, David
  • Howlett, Patrick C.
  • Forsyth, Maria
  • Wang, Xiaoen
Unformatted postprint, Organic ionic plastic crystals (OIPCs) have been recognised as promising solid-state electrolyte materials for next-generation energy storage devices. Recently, the addition of polymer nanofillers to OIPCs has led to the design of OIPC-based solid-state electrolytes with enhanced mechanical stability and ion conductivity. However, the mechanisms of enhancement and the influence of different polymer surface chemistries on the ion dynamics are not yet well understood, which has hindered the further development of high-performance OIPC-based electrolytes. In this work, we selected two different polymer nanoparticles, poly(vinylidene fluoride) (PVDF) and polystyrene (PS), and investigated the effects of the polymer surfaces on the thermal behaviour and ion transport properties of the OIPC, N-ethyl N-methyl pyrrolidinium bis(fluorosulfonyl)imide ([C2mpyr][FSI]). We found significantly different thermal behaviours, as well as ion transport properties in the OIPC/nanoparticle composites. Specifically, compared with pure [C2mpyr][FSI], the addition of PVDF nanoparticles effectively enhanced the ion conductivity of the OIPC composite, with the optimum achieved near the percolation threshold of PVDF nanoparticles. In contrast, the addition of PS nanoparticles to the OIPC led to a slight enhancement at low concentrations and then a significant decrease in conductivity at higher concentrations. DSC, FTIR and EIS confirm that the interaction between the PVDF nanoparticles and the OIPC induces the formation of less ordered OIPC layers on the PVDF surfaces, leading to the conductivity enhancement. Finally, different structure models based on the results of this work are proposed, which provide principle guidelines for the design of future OIPC-based highly conductive electrolyte materials., The authors would like to thank Dr Wesley A. Henderson for his valuable discussion and the US Army Research Office (ARO) for financial support (W911NF1710560). The Australian Research Council (ARC) is acknowledged for support through the Australian Postgraduate Awards and Deakin University postgraduate research scholarships. L. P. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska–Curie grant agreement No. 797295. Dr Ruhamah Yunis is also acknowledged for her help with plastic crystal synthesis.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Single- Versus Dual-Ion UV-Cross-Linked Gel Polymer Electrolytes for Li–O2 Batteries

  • Álvarez Tirado, Marta
  • Castro, Laurent
  • Guzmán González, Gregorio
  • Porcarelli, Luca
  • Mecerreyes Molero, David
Lithium-O2 batteries represent one of the most appealing candidates for battery electric vehicles (BEV) due to its remarkable theoretical high energy density, similar to fossil fuels. Solid polymer electrolytes represent a plausible solution to tackle some of the challenges associated to conventional liquid-based Li-O2 batteries, including safety concerns. Herein, cross-linked robust gel polymer electrolytes (GPE) based on poly(ethylene glycol) dimethacrylate (PEGDM) and tetraethylene glycol dimethyl ether (TEGDME) as plasticizer are prepared by rapid UV-photopolymerization. Both types of robust GPEs presented high ionic conductivity at room temperature (1.6·10−4 S·cm−1 and 1.4·10−3 S·cm−1 for single ion or dual ion, respectively). Both types of GPEs, single ion and dual ion lithium conductors, have been compared for the first time on Li-O2 cells. First, their performance was investigated in symmetrical Li|Li cells. In this case, the dual-ion GPE showed an outstanding behavior where the overpotential was <0.2 V vs Li0/Li+ for more than 40 hours at a current density as highs as ±1 mA·cm−2. On the other hand, in full Li-O2 configuration, the single ion GPE cell showed superior discharge capacity, up to 2.38 mAh·cm−2. A dynamic discharge characterization technique is proposed here as a method for evaluating the polarization effect in electrolytes during discharge in an easy, quantifiable and reproducible manner., This work was supported by the European Commission´s funded Marie Skłodowska-Curie project POLYTE-EID (Project No. 765828). L.P. has received funding from the European Commission Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 797295 (eJUMP). G.G-G. is grateful to “Secretaría de Estado de Ciencia, Tecnología e Innovación” from Ciudad de Mexico for the current postdoctoral fellowship (SECTEI/133/2019).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Easy-to-Make Polymer Hydrogels by UV-Curing for the Cleaning of Acrylic Emulsion Paint Films

  • Cárdaba, Irene
  • Porcarelli, Luca
  • Gallastegui, Antonela
  • Mecerreyes Molero, David
  • Maguregui Olabarria, Miren Itxaso
The cleaning of acrylic emulsion paint surfaces poses a great challenge in the conservation field, due to their high water sensitivity. In this article, we present easy-to-make polymer hydrogels, made by UV-photopolymerization, that show excellent cleaning properties. The formulation of hydrogels obtained by UV-curing and their performance as dry cleaners for acrylic paints was investigated. First, different hydrogel formulations based on functional acrylic monomers were used to formulate a series of UV cross-linked hydrogels by fast UV photopolymerization. Their effectiveness on surface dirt removal was investigated by SEM microscopy and colorimetry. The hydrogels showed excellent cleaning properties and controlled water release, and they still performed satisfactorily after several cleaning uses. The obtained UV-hydrogels were compared to the well-known agar gels, showing benefits in terms of reducing excess water. This article shows that easy-to-make UV-cured hydrogels are an efficient tool for the cleaning of surface dirt from water-sensitive paintings, overcoming the limits of traditional cleaning methods., This research was funded by European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 797295 (eJUMP).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Probing disorder and dynamics in composite electrolytes of an organic ionic plastic crystal and lithium functionalised acrylic polymer nanoparticles

  • García, Yadi
  • Porcarelli, Luca
  • Haijin, Zhu
  • Forsyth, Maria
  • Mecerreyes Molero, David
  • O´Dell, Luke A.
Solid composite electrolytes combining an ionic molecular phase to facilitate ion transport with a polymeric component to provide mechanical strength are promising material for solid state batteries. However, the structure-property relationships of these complex composites are not fully understood. Herein we study composites combining the non-flammability and thermal stability of the organic ionic plastic crystal (OIPC) N-methyl-N-ethylpyrrolidinium bis(trifluoromethanesulfonyl) amide [C2mpyr][TFSI] with the mechanical strength of acrylic polymer nanoparticles functionalised with sulphonamide groups having lithium counter-cations. The effect of the formation of interfaces and interfacial regions between the OIPC and polymer nanoparticle on the thermal stability, ion transport, morphology and ion dynamics were studied. It was found that the composites where an interphase was formed by local mixing of the polymer with the OIPC upon heating showed higher local disorder in the OIPC phase and enhanced ion transport in comparison with the as-prepared composites. In addition, doping the composite with LiTFSI salt led to further structural disorder in the OIPC and a selective increase in lithium-ion mobility. Such an improved fundamental understanding of structure, dynamics and interfacial regions in solid electrolyte composites can inform the design of OIPC-polymer nanoparticle composites with enhanced properties for application as solid electrolyte in batteries., The Australian Research Council (ARC) and the ARC Centre of Excellence for Electromaterials Science (ACES) are acknowledged for supporting this work. L.P. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska–Curie grant agreement No 797295. M.F. and D.M acknowledge Ikerbasque, Basque Foundation for Science, E−48011 Bilbao, Spain for supporting this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High lithium conductivity of miscible poly(ethylene oxide)/methacrylic sulfonamide anionic polyelectrolyte polymer blends

  • Olmedo-Martínez, Jorge L.
  • Porcarelli, Luca
  • Alegría, Ángel
  • Mecerreyes, David
  • Müller, Alejandro J.
In this work, we develop novel single-ion polymer electrolytes by mixing poly(lithium 1-[3-(methacryloyloxy) propylsulfonyl]-1-(trifluoromethanesulfonyl) imide) (PLiMTFSI) and poly(ethylene oxide) (PEO) with different molecular weights. The impact of PLiMTFSI on the crystallization and conductivity of the blends was explored in detail. When PLiMTFSI (an amorphous polymer) is added to PEO, the crystallization ability of PEO decreases. However, blends with high-molecular weight PEO (1000 kg/mol) experience a lower reduction in crystallinity and melting points. As a result, lower conductivity values were obtained in these blends, which is why most of the study was then focused on blends incorporating a lower-molecular weight PEO (100 kg/mol). We show that the melting point, degree of crystallinity, spherulitic growth, and overall crystallization kinetics decrease in the presence of PLiMTFSI, which are all signs of miscibility. Furthermore, the blends show a single glass transition temperature over the whole composition range. Therefore, our results indicate that PEO and PLiMTFSI are miscible, as corroborated by applying the Nishi-Wang equation and obtaining negative χ12 values (i.e., the Flory-Huggins interaction parameter) for all blends. Our results show that intermediate molecular weight blends (100 kg/mol PEO and 50 kg/mol PLiMTFSI) showed the highest ionic conductivity value. Interestingly, a value of 2.1 × 10-4 S/cm was obtained at 70 °C, which is one of the highest reported so far for a free-standing film of single-ion conducting polymer electrolytes. Finally, employing dielectric spectroscopy, the contribution of ion density and ion mobility to ionic conductivity could be separated. It was found that ion mobility is the parameter that has a greater weight in the conduction process., We wish to thank the Consejo Nacional de Ciencia y Tecnología (the National Council of Science and Technology) (CONACYT), Mexico, for the grant awarded to J.L.O.-M. no. 471837. L.P. has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 797295. We acknowledge funding from the Basque Government through grant IT1309-19 and IT1175-19. Authors would like to thank IONBIKE-RISE project, and this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 823989.