Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct Conversion of Syngas to Higher Alcohols via Tandem Integration of Fischer-Tropsch Synthesis and Reductive Hydroformylation

  • Jeske, Kai
  • Rösler, Thorsten
  • Maurice Belleflamme
  • Nico Fischer
  • Michael Claeys
  • Walter Leitner
  • Andreas J. Vorholt
  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The selective conversion of syngas to higher alcohols is an attractive albeit elusive route in the quest for effective production of chemicals from alternative carbon resources. We report the tandem integration of solid cobalt Fischer-Tropsch and molecular hydroformylation catalysts in a one-pot slurry-phase process. Unprecedented selectivities (>50 wt %) to C2+ alcohols are achieved at CO conversion levels >70 %, alongside negligible CO2 side-production. The efficient overall transformation is enabled by catalyst engineering, bridging gaps in operation temperature and intrinsic selectivity which have classically precluded integration of these reactions in a single conversion step. Swift capture of 1-olefin Fischer-Tropsch primary products by the molecular hydroformylation catalyst, presumably within the pores of the solid catalyst is key for high alcohol selectivity. The results underscore that controlled cooperation between solid aggregate and soluble molecular metal catalysts, which pertain to traditionally dichotomic realms of heterogeneous and homogeneous catalysis, is a promising blueprint toward selective conversion processes., This work received funding from the German Ministry for Education and Research (BMBF, 01DG17019 CAT2BIOL) and the European Research Council (ERC-2019-COG 864195, TANDEng). Parts of this research have also received funding from the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100), the EU Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL) and the Max Planck Society. W.L. acknowledges the "Fuel Science Center", funded by the German Research Foundation (DFG) (grant Nr. 390919832), for continuing support. Sasol and Eurosupport are thanked for the provision of Al<INF>2</INF>O<INF>3</INF> precursors. Prof. F. Schuth (MPI-KOFO) is gratefully thanked for lab space allocation and supportive access to research instrumentation. A. Gurowski (MPI-CEC), N. Pfander (MPI-CEC), V. Dietl (MPI-KOFO) and M. Fadlalla (UCT) are acknowledged for contributions to ICP-MS, STEM/EDS, offline GC and 2DGC analyses, respectively. Staff of the EM unit at the UPV are acknowledged for technical assistance with microscopy characterization. Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthetic ferripyrophyllite: preparation, characterization and catalytic application

  • Qiao, Yunxiang
  • Theyssen, Nils
  • Spliethoff, Bernd
  • Folke, Jan
  • Weidenthaler, Claudia
  • Schmidt, Wolfgang
  • Ochoa-Hernandez, Cristina
  • Bill, Eckhard
  • Ye, Shengfa
  • Ruland, Holger
  • Schueth, Ferdi
  • Leitner, Walter
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Sheet silicates, also known as phyllosilicates, contain parallel sheets of tetrahedral silicate built up by [Si2O5](2-) entities connected through intermediate metal-oxygen octahedral layers. The well-known minerals talc and pyrophyllite are belonging to this group based on magnesium and aluminium, respectively. Surprisingly, the ferric analogue rarely occurs in nature and is found in mixtures and conglomerates with other materials only. While partial incorporation of iron into pyrophyllites has been achieved, no synthetic protocol for purely iron-based pyrophyllite has been published yet. Here we report about the first artificial synthesis of ferripyrophyllite under exceptional mild conditions. A similar ultrathin two-dimensional (2D) nanosheet morphology is obtained as in talc or pyrophyllite but with iron(iii) as a central metal. The high surface material exhibits a remarkably high thermostability. It shows some catalytic activity in ammonia synthesis and can serve as catalyst support material for noble metal nanoparticles., The authors gratefully acknowledge the following people for support with analytical measurements and data analysis: Hans-Josef Bongard (SEM-EDX), Silvia Palm (EDX bulk), Adrian Schluter (TEM), Norbert Pfander (STEM), Jan Ternieden and Jan Nicolas Buscher (XRD and XPS), Prof. Dr Osamu Terasaki and Dr Yanghang Ma (3D electron diffraction tomography: failed due to the poor crystallinity and stability under strong beam irradiation), Dr Nicolas Duyckaerts (NH3-TPD measurements), Kai Jeske (GC gas analysis), Dr Yuxiao Ding (ATR-IR) and Dr Zhengwen Cao (titration). The authors also would like to thank Prof. Dr Robert Schlogl, Dr Thomas Lunkenbein, Fabian Pienkoss and Dr Gaetano Calvaruso for helpful and enthusiastic discussions, as well as Niklas Fuhrmann and Lars Winkel for technical support. The studies were carried out as part of our activities in the Cluster of Excellence "Tailor-Made Fuels from Biomass" (EXC 236) and "The Fuel Science Center" funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy -Exzellenzcluster 2186 "The Fuel Science Center" ID: 390919832. Open Access funding provided by the Max Planck Society.