Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mixed-metal promotion in a Manganese-Molybdenum Oxynitride as catalyst to integrate C-C and C-N coupling reactions for the direct synthesis of acetonitrile from syngas and ammonia

  • Martinez-Monje, María Elena
  • Henao-Sierra, Wilson Albeiro
  • Ródenas Torralba, Tania
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Pérez Dieste, Virginia
  • Missyul, Alexander
  • Agostini, Giovanni
[EN] Transition metal nitrides and their oxy- and carbo-nitride analogues attract interest as catalysts in various sustainability areas. They offer potential in the development of conversion routes for the synthesis of nitrogenated organic compounds, via the integration of C & horbar;C and C & horbar;N coupling reactions from sustainable C1 and N1 feedstocks, linking carbon and nitrogen renewable cycles. Herein, a series of structurally uniform (NH4)nHmMxMoyOz2H2O ammonium metal molybdate materials (C 2/m) serve as catalyst precursors, providing atomic-level metal mixing. Among various 3d transition metals, Mn proves the most effective promoter. A [MnMo] mixed-metal catalyst exhibits superior selectivity to acetonitrile (56 % among all organic products) and stability, significantly outperforming monometallic [Mo] and [Mn] counterparts. Multimodal physicochemical characterization, including temperature-resolved X-ray diffraction, Xray absorption near-edge structure and extended X-ray absorption fine structure, and depth-profiling X-ray photoelectron spectroscopy, shows partial nitridation to a cubic (Fm-3m) mixed-metal oxynitride as the working catalyst under operation conditions. Consistent with first-principles thermochemistry, manganese is found to disrupt extended molybdenum nitride domains, preserving manganese-enriched oxynitride domains under the markedly nitriding reaction conditions. Density functional theory predicts these partially oxidic domains to facilitate C & horbar;C coupling reactions compared to fully nitrided surfaces, enhancing conversion of the stable reaction intermediate HCN to acetonitrile., This work received funding from the European Research Council (ERC2019-CoG 864195). Additionally, parts of this study were funded through the projects PID2022-140111OB-I00, and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033/ and ERDF A way of making Europe, as well as part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (project MAF/2022/012). High-resolution XRD, SR-XPS and XAS experiments were performed at the BL04-MSPD, BL24-CIRCE and BL22-CLÆSS and BL16-NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff. M.D. W.H. acknowledges the predoctoral grant PRE2019- 087571, funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/ and ERDF A way of making Europe. T.R. acknowledges support by the Ramón y Cajal Program (Grant No. RYC2022-037355-I), funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. A. Herrero, J. Soriano and M.D. Soriano (ITQ) and M. M. Abad (UG) are acknowledged for experimental contributions to elemental analysis, (SR)XPS and EDS experiments, respectively. The electron microscopy unit at UPV is acknowledged for support with, and maintenance of, their electron microscopy facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Direct Conversion of Syngas to Higher Alcohols via Tandem Integration of Fischer-Tropsch Synthesis and Reductive Hydroformylation

  • Jeske, Kai
  • Rösler, Thorsten
  • Maurice Belleflamme
  • Nico Fischer
  • Michael Claeys
  • Walter Leitner
  • Andreas J. Vorholt
  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The selective conversion of syngas to higher alcohols is an attractive albeit elusive route in the quest for effective production of chemicals from alternative carbon resources. We report the tandem integration of solid cobalt Fischer-Tropsch and molecular hydroformylation catalysts in a one-pot slurry-phase process. Unprecedented selectivities (>50 wt %) to C2+ alcohols are achieved at CO conversion levels >70 %, alongside negligible CO2 side-production. The efficient overall transformation is enabled by catalyst engineering, bridging gaps in operation temperature and intrinsic selectivity which have classically precluded integration of these reactions in a single conversion step. Swift capture of 1-olefin Fischer-Tropsch primary products by the molecular hydroformylation catalyst, presumably within the pores of the solid catalyst is key for high alcohol selectivity. The results underscore that controlled cooperation between solid aggregate and soluble molecular metal catalysts, which pertain to traditionally dichotomic realms of heterogeneous and homogeneous catalysis, is a promising blueprint toward selective conversion processes., This work received funding from the German Ministry for Education and Research (BMBF, 01DG17019 CAT2BIOL) and the European Research Council (ERC-2019-COG 864195, TANDEng). Parts of this research have also received funding from the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100), the EU Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL) and the Max Planck Society. W.L. acknowledges the "Fuel Science Center", funded by the German Research Foundation (DFG) (grant Nr. 390919832), for continuing support. Sasol and Eurosupport are thanked for the provision of Al<INF>2</INF>O<INF>3</INF> precursors. Prof. F. Schuth (MPI-KOFO) is gratefully thanked for lab space allocation and supportive access to research instrumentation. A. Gurowski (MPI-CEC), N. Pfander (MPI-CEC), V. Dietl (MPI-KOFO) and M. Fadlalla (UCT) are acknowledged for contributions to ICP-MS, STEM/EDS, offline GC and 2DGC analyses, respectively. Staff of the EM unit at the UPV are acknowledged for technical assistance with microscopy characterization. Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Low-nuclearity single-atom and supported metal cluster catalysts in ethylene and propylene hydroformylation

  • Garcia-Farpon, Marcos
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Olefin hydroformylation is one of the most significant examples of homogeneously catalyzed conversion processes. However, developing chemo/regio-selective and stable solid catalysts has remained a persistent challenge in heterogeneous catalysis. Particularly the design of solid catalysts for the hydroformylation of light, gaseous olefins, such as ethylene and propylene, has been extensively researched, given that the products from these processes are key players in the oxo-chemicals market. Additionally, developing selective, continuous gas-solid C2-3 olefin hydroformylation processes prospectively offers a reactive separation alternative to conventional and massively energy-intensive cryogenic distillation separation methods. In this review, we first assess the potential of reductive olefin hydroformylation as a cost-effective alternative to conventional cryogenic distillation processes for recovering value from industrial gas mixtures of ethylene and propylene. Taking a conventional ethylene splitter as a reference case, a reactive separation through ethylene reductive hydroformylation to 1-propanol is predicted to provide significant savings in terms of utility costs. Next, major advances in the design and development of solid catalysts for ethylene and propylene hydroformylation are surveyed, with an emphasis on single-atom catalysts (SACs) and supported metal nanoclusters. These catalysts have recently achieved hydroformylation activity and chemo/regio selectivity comparable to, or even surpassing, those traditionally exclusive to free molecular catalysts in solution. Different catalyst design strategies, including the heterogenization of metal coordination complexes in supported ionic liquid phase (SILP) catalysts and porous organic ligands (POLs), as well as the tuning of oxide-supported catalysts via the adjustment of metal-oxide interfacial effects or through nanoconfinement within zeolitic frameworks, are systematically reviewed and compared. Finally, conclusions are provided, alongside a critical perspective on fundamental and practical aspects that require particular attention to ensure rational and systematic progress toward optimized catalysts and reaction settings, ultimately paving the way for the heterogenization of light olefin hydroformylation processes., This work has received funding from the European Research Council (ERC-CoG, TANDEng, Grant Agreement Nr. 864195) . Parts of this work have received support by the Spanish Ministry of Science and Innovation, through grants CEX2021-001230-S and PID2022-140111OB-I00, funded by MCIN/AEI/10.13039/501100011033. M.G.F acknowledges support by the Ministry of Education of Spain through his predoctoral grant FPU17/04701. J. Prieto is acknowledged for his contributions to artwork design.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Tandem Catalytic Processes for Selective Ethylene Valorization into C3 Chemicals

  • García Farpón, Marcos
[ES] El etileno representa uno de los pilares de la industria química actual como parte de los denominados "productos químicos básicos". Los procesos de recuperación y valorización de etileno actuales están basados en fuentes de carbono de origen fósil y son operados a gran escala, por lo que tienen asociado un elevado coste energético y contribuyen significativamente a la emisión de gases de efecto invernadero. La preocupación actual por avanzar hacia la descarbonización de la industria química ha impulsado el diseño de procesos químicos más sostenibles. En este contexto, el diseño de nuevos procesos catalíticos (tándem), con alta economía atómica y operando a condiciones de operación más suaves, supone una alternativa de gran interés. La presente tesis doctoral se centra en el desarrollo de procesos catalíticos alternativos para la conversión de (bio-)etileno en productos de alto valor añadido, como el propileno o los compuestos oxigenados C3. En primer lugar, se ha estudiado el efecto de emplear diferentes soportes basados en óxidos metálicos en catalizadores de Rh de dispersión atómica para la hidroformilación de etileno en fase gas para producir propanal. Entre los materiales estudiados con diferente grado de reducibilidad superficial, el catalizador Rh1/SnO2 mostró el mejor rendimiento, con altos valores de actividad y con una selectividad a hidroformilación prácticamente total, a unas condiciones de operación muy suaves (P=20 bar, T=383 K). El comportamiento extraordinario de este material se ha atribuido a la capacidad de formar vacantes de oxígeno superficiales, lo que facilita la formación de especies de Rh de alta flexibilidad de coordinación y con propiedades electrónicas que se asemejan a de los catalizadores moleculares en disolución empleados industrialmente. A continuación, se estudió el uso de catalizadores bimetálicos Ag-Pt para la hidrogenación selectiva de aldehídos en presencia de olefinas. Para la composición óptima del catalizador (<4 at% Pt), se descubrió que las especies de Pt estaban altamente dispersas sobre la matriz de Ag, posiblemente en forma de las denominadas "aleaciones de átomos aislados". Dicho catalizador se combinó junto al catalizador de hidroformilación altamente selectivo Rh1/SnO2 en un proceso de hidroformilación reductiva, que permitió la conversión directa de etileno a 1-propanol con selectividad prácticamente total (98%) a conversiones de etileno >50%. Por último, se estudió la conversión de etileno a propileno mediante procesos tándem de dimerización-metátesis. Para ello, se estudiaron métodos de calentamiento específico y termometría selectiva combinando técnicas de calentamiento por inducción y termometría por luminiscencia. Dichos métodos resultaron adecuados para solventar las incompatibilidades de temperatura inherentes a los procesos de catálisis tándem del estado del arte y desbloquear, de esta manera, rendimientos inaccesibles para procesos operados mediante calentamiento convencional., [CA] L'etilè representa un dels pilars de la indústria química actual com a part dels denominats "productes químics bàsics". Els processos de recuperació i valorització d'etilé actuals estan basats en fonts de carboni d'origen fòssil i són operats a gran escala, per la qual cosa tenen associat un elevat cost energètic i contribueixen significativament a l'emissió de gasos d'efecte d'hivernacle. La preocupació actual per avançar cap a la descarbonització de la indústria química requereix el disseny de processos químics més sostenibles. En este context, el disseny de nous processos catalítics (tàndem), amb alta economia atòmica i operant a condicions d'operació més suaus, suposa una alternativa de gran interés. La present tesi doctoral se centra en el desenvolupament de processos catalítics alternatius per a la conversió de (bio-)etilè en productes d'alt valor afegit, com el propilé o els compostos oxigenats C3. En primer lloc, s'ha estudiat l'efecte d'utilitzar diferents suports basats en òxids metàllics en catalitzadors de Rh de dispersió atòmica per a la *hidroformilación d'etilè en fase gas per a produir probresca. Entre els materials estudiats amb diferent grau de reducibilidad superficial, el catalitzador Rh1/SnO2 va mostrar el millor rendiment, amb alts valors d'activitat i amb una selectivitat a hidroformilació pràcticament total, a unes condicions d'operació molt suaus (P=20 bar, T=383 K). El comportament extraordinari d'este material s'ha atribuït a la capacitat de formar vacants d'oxigen superficials, la qual cosa facilita la formació d'espècies de Rh d'alta flexibilitat de coordinació i amb propietats electròniques que s'assemblen a dels catalitzadors moleculars en dissolució utilitzats industrialment. A continuació, es va a estudiar l'ús de catalitzadors bimetàl·lics Ag-Pt per a la hidrogenació selectiva d'aldehids en presència d'olefines. Per a la composició òptima del catalitzador (<4 at% Pt), es va descobrir que les espècies de Pt estaven altament disperses sobre la matriu de Ag, possiblement en forma dels denominats "aliatges d'àtoms aïllats". Aquest catalitzador es va a combinar al costat del catalitzador de hidroformilació altament selectiu Rh1/SnO2 en un procés de hidroformilació reductiva, que va permetre la conversió directa d'etilè a 1-propanol amb selectivitat pràcticament total (98%) a conversions d'etilé >50%. Finalment, es va a estudiar la conversió d'etilè a propilè mitjançant processos tàndem de dimerització-metàtesi. Per a això, es van a estudiar mètodes de calfament específic i termometria selectiva combinant tècniques de calfament per inducció i termometria per luminescència. Aquests mètodes van a resultar adequats per a solucionar les incompatibilitats de temperatura inherents als processos de catàlisis tàndem de l'estat de l'art i desbloquejar, d'esta manera, rendiments inaccessibles per a processos operats mitjançant calfament convencional., [EN] Ethylene constitutes one of the pillars of the current chemical industry as part of the so-called "commodity chemicals". Current ethylene recovery and valorization technologies are based on fossil-based carbon feedstocks operated at the large scale, which are very energy-intense and contribute to important greenhouse gas emissions. The current concern on progressing towards a defossilized chemical industry calls for the design of more sustainable chemical processes. In this regard, the design of novel (tandem-) catalytic processes, with high atom economy at milder operation conditions, is desired. In this thesis, the conversion of (bio-)ethylene into high-added value chemicals such as propylene and C3 oxygenates via alternative catalytic processes is addressed. Firstly, metal oxide support effects have been explored in Rh single-atom catalysts for gas-phase ethylene hydroformylation to propanal. By exploring a series of materials with different surface reducibility, a Rh1/SnO2 catalyst showed to deliver the best performance, with high Rh-specific activity and essentially full selectivity to hydroformylation under very mild operation conditions (P=20 bar, T=383 K). The unconventional performance of this material has been ascribed to the capacity of forming surface oxygen vacancies on the SnO2 support, which triggers the formation of Rh species that resemble the electronic and coordination flexibility properties of Rh centers in benchmark molecular complexes operating in solution. Next, bimetallic Ag-Pt catalysts were explored, computationally and experimentally, for the selective hydrogenation of aldehydes in the presence of olefins under the same set of mild operation conditions. For the optimal catalyst formulation (<4 at% Pt), Pt species were highly dispersed within the Ag matrix, possibly forming a so-called "single-atom alloy". This catalyst was integrated with the fully selective hydroformylation Rh1/SnO2 catalyst in a reductive hydroformylation process, which unlocked the direct conversion of ethylene to 1-propanol with almost full selectivity (98%) at ethylene conversion >50%. Finally, the direct conversion of ethylene into propylene via tandem dimerization-metathesis has been explored. Catalyst-specific heating and thermometry methods, combining induction heating and remote luminescence thermometry, proved suitable to alleviate temperature incompatibilities inherent to state-of-the-art tandem catalytic processes and unlock catalytic performances inaccessible to conventionally heated conversion processes., I would like to thank the Spanish Ministry of Science, Innovation and Universities (MCIU) for my FPU grant (FPU17/04701) and the European Research Council (ERC) under the Horizon 2020 research and innovation program (ERC-CoG-TANDEng; grant agreement 864195), which have made possible the realization of this thesis. I would like to thank the Institute of Chemical Technology (ITQ) and the Spanish Research Council (CSIC) for giving me access to the infrastructure I have used for my PhD work. I would like also to thank the Institute of Materials Science of Madrid (ICMM) and the Massachusetts Institute of Technology (MIT) for giving me access to their facilities during my short stays. Thanks also to the ALBA synchrotron and, particularly, to the CLÆSS beamline for making possible the access to synchrotron experiments granting us with several beamtimes. Finally I would like to thank the Chemical and Nuclear Engineering department (DIQN) of the Polytechnic University of Valencia (UPV), for hosting me as a teaching assistant during these years
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifunctional materials for catalyst-specific heating and thermometry in tandem catalysis

  • Garcia-Farpon, Marcos
  • Peláez-Fernández, Raquel
  • Atakan, Burak
  • Zaldo, Carlos
  • Recio-Ballesteros, Veronica
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] A multifunctional material design, integrating catalytic as well as auxiliary magnetic susception and contactless thermal sensing functionalities, unlocks catalyst-specific heating and thermometry for spatially proximate solid catalysts in a single reactor. The new concept alleviates temperature incompatibilities in tandem catalysis, as showcased for the direct production of propene from ethene, via sequential olefin dimerization and metathesis reactions., This research has received funding from the Spanish Ministry of Science and Innovation (projects ERC2018-092838 and PID2021-128090OB-C21) and the European Research Council (ERC) under the Horizon 2020 research and innovation programme (ERC-CoG-TANDEng; grant agreement 864195). M. G. F. acknowledges support by the Spanish Ministry of Education through predoctoral grant FPU17/04701. R. P. acknowledges support by the Conselleria Valenciana de Innovacion, Universidades, Ciencia y Sociedad Digital through postdoctoral fellowship CIAPOS/2021/92. P. Marin (Univ. Oviedo) and A. M. Luque (ITQ) are acknowledged for contributions to the development of the meshed geometry and model for CFD simulations, and C. Cascales (ICMM) for discussions on phosphor design. XAS experiments were performed at the CL AE SS beamline at ALBA Synchrotron (Barcelona, Spain) with the collaboration of ALBA staff. W. Henao, C. Marini and G. Agostini are acknowledged for guidance with data collection and XAS data reduction. E. Torregrosa (ITQ) is acknowledged for assistance with induction heating experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solid Single-Atom Catalysts in Tandem Catalysis: Lookout, Opportunities and Challenges

  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Tandem catalysis stands out as a major instrument towards the intensification of existing and future chemical processes. Initially formulated in the field of homogeneous catalysis, the concept relies on the single-pot integration of two (or more) catalysts showing high specificity for mechanistically decoupled reactions, while being operational and compatible under a single set of operation conditions. Isolated metal atoms stabilized on solid carriers in single-atom catalysts (SACs) hold the potential to reconcile the high reaction specificities of mononuclear sites in molecular catalysts with an intrinsic catalyst compartmentalization on inorganic matrices. Understandably, SACs have started to be considered as platforms in tandem catalysis. Tandem (electro)catalytic processes based on SACs have been showcased recently. While this sets excellent prospects for the expansion of this research subarea, challenges are faced, particularly as to the verification of the tandem nature of the processes., This project has received funding from the European Research Council (ERC) under the Horizon 2020 research and innovation programme (Grant agreement No. 864195, ERC-CoG-TANDEng).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

FIB-SEM tomography in catalysis and electrochemistry

  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Tomographic imaging methods have been incorporated, mostly from other scientific disciplines, into catalysis research. They are invaluable tools for the structural diagnostics of solid catalyst and electrode materials, which uniquely provide information on notions of spatial character which remain out of reach for conventional singleprojection, i.e. 2D, microscopy methods. Focused-Ion-Beam Scanning-Electron-Microscopy (FIB-SEM) tomography is a destructive, slicing-type tomographic method which offers spatial resolutions down to few nm for inspection volumes up to several tens of mu m across. As such, it has attracted a significant deal of attention as a means to study mesoscale features and macropore networks in catalytic materials. In this review, we first provide a succinct account on the recent technical developments in dual-beam technologies and discuss their implications for tomographic imaging experiments. Next, an exemplary experimental workflow for FIB-SEM experiments is discussed, with emphasis on technical aspects which concern specifically work with highly porous, electrically insulating catalyst materials. Contributions of FIB-SEM tomography to the quantification of mass transportrelevant topological parameters in porous catalysts, and multiple-phase boundaries of significance for concomitant mass and charge transport phenomena in electrode materials are surveyed. The application of FIBSEM tomography for the analysis and rational development of materials in catalysis and electrochemistry has seen a fast surge over the last decade. It promises to continue consolidating as an important diagnostic tool for meso- and nano-spatial structural features, e.g. in multi-functional composite catalyst materials, wherein the relative spatial location of different sub-materials/functionalities are determinant for performance., Authors acknowledge funding from the European Research Council (ERC-2019-COG 864195, TANDEng) . Staff members at the Electron Microscopy Service unit of the UPV are gratefully acknowledged for equipment maintenance and technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design of Cobalt Fischer-Tropsch Catalysts for the Combined Production of Liquid Fuels and Olefin Chemicals from Hydrogen-Rich Syngas

  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López-Luque, Ivan|||0000-0002-3982-1100
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Jeske, K.
  • Kizilkaya, Ali Can
  • Pfänder, Norbert
  • Bartsch, Mathias
[EN] Adjusting hydrocarbon product distributions in the Fischer¿Tropsch (FT) synthesis is of notable significance in the context of so-called X-to-liquids (XTL) technologies. While cobalt catalysts are selective to long-chain paraffin precursors for synthetic jet- and diesel-fuels, lighter (C10¿) alkane condensates are less valuable for fuel production. Alternatively, iron carbide-based catalysts are suitable for the coproduction of paraffinic waxes alongside liquid (and gaseous) olefin chemicals; however, their activity for the water¿gas-shift reaction (WGSR) is notoriously detrimental when hydrogen-rich syngas feeds, for example, derived from (unconventional) natural gas, are to be converted. Herein the roles of pore architecture and oxide promoters of Lewis basic character on CoRu/Al2O3 FT catalysts are systematically addressed, targeting the development of catalysts with unusually high selectivity to liquid olefins. Both alkali and lanthanide oxides lead to a decrease in turnover frequency. The latter, particularly PrOx, prove effective to boost the selectivity to liquid (C5¿10) olefins without undesired WGSR activity. In situ CO-FTIR spectroscopy suggests a dual promotion via both electronic modification of surface Co sites and the inhibition of Lewis acidity on the support, which has direct implications for double-bond isomerization reactivity and thus the regioisomery of liquid olefin products. Density functional theory calculations ascribe oxide promotion to an enhanced competitive adsorption of molecular CO versus hydrogen and olefins on oxide-decorated cobalt surfaces, dampening (secondary) olefin hydrogenation, and suggest an exacerbated metal surface carbophilicity to underlie the undesired induction of WGSR activity by strongly electron-donating alkali oxide promoters. Enhanced pore molecular transport within a multimodal meso-macroporous architecture in combination with PrOx as promoter, at an optimal surface loading of 1 Prat nm¿2, results in an unconventional product distribution, reconciling benefits intrinsic to Co- and Fe-based FT catalysts, respectively. A chain-growth probability of 0.75, and thus >70 C% selectivity to C5+ products, is achieved alongside lighter hydrocarbon (C5¿10) condensates that are significantly enriched in added-value chemicals (67 C%), predominantly ¿-olefins but also linear alcohols, remarkably with essentially no CO2 side-production (<1%). Such unusual product distributions, integrating precursors for synthetic fuels and liquid platform chemicals, might be desired to diversify the scope and improve the economics of small-scale gas- and biomass-to-liquid processes., Sasol Materials is very gratefully acknowledged for the supply of high-purity pseudoboehmite alumina precursors. M. G. Farpon (ITQ) is acknowledged for 2-butene olefin isomer equilibrium composition determinations with Aspen Plus (AspenTech). J.M. Salas (ITQ) is acknowledged for his contributions to the CO-FTIR studies. A. Munoz and M.D. Soriano (ITQ) are acknowledged for the XPS experiments, and M. Arribas (ITQ) for H2-chemisorption measurements. M. Meyer and V. Dietl (MPI-KOFO) and V. Recio (ITQ) are acknowledged for technical assistance with lab work and offline GC product analyses. Prof. A. Lorke (UDE) is gratefully acknowledged for access to dual-beam facilities. We thank Prof. F. Schu<spacing diaeresis>th (MPI-KOFO) for the allocation of lab space and supportive access to research instrumentation. This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL). Additionally, parts of this research received funding by the Max Planck Society, the Bundesministerium fur Bildung und Forschung (grant number 01DG17019), the Spanish Ministry of Science and Innovation (`Severo Ochoa Excellence Program' (SEV-2016-0683)) and the European Research Council (grant ERC-2019-CoG-864195). DFT calculations were performed at the EFES computing cluster located in the Izmir Institute of Technology (IZTECH). A.C.K. thanks IZTECH for the allocation of computational time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation

  • Garcia-Farpon, Marcos
  • Plessow, Philipp N.
  • Andres-Marcos, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Felix
  • Henao-Sierra, Wilson Albeiro
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media., This work received funding from the European Research Council (ERC-2019-CoG 864195) and project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and "ERDF A way of making Europe". M.G.F, E.A. and W.H. acknowledge support by their predoctoral grants FPU17/04701, FPU17/04751 and PRE2019-087571, respectively. R.A. acknowledges support from the Spanish MICIN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (DGA E13-20R) and EU H2020 "ESTEEM3" (823717). P.N.P and F.S. acknowledge support by the state of Baden-Wuerttemberg through bwHPC (bwunicluster and JUSTUS, RV bw17D011) and the Helmholtz Association. XAS experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff, R. Pelaez, N. Atashi and M.E. Martinez. M. Boronat is thanked for support with slab model relaxations. V. Recio, J.M. Salas, A. Munoz and M.D. Soriano are acknowledged for experimental contributions to catalyst synthesis, FTIR, Raman and XPS measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of acetonitrile from NH3/syngas mixtures on molybdenum nitride: Insights into the reaction mechanism

  • Kizilkaya, Ali Can
  • Martinez-Monje, María Elena
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Owing to their metallic-like surface electronic properties and their capacity to act as reservoirs and solid transfer agents for active nitrogen, transition metal nitrides are interesting as solid catalysts for C-C and C-N coupling reactions for the bottom-up production of higher (C2+) nitrogenated chemicals from unconventional carbon resources. The catalytically active state and reaction mechanism for the direct synthesis of acetonitrile from syngas/ammonia mixtures are studied on an unsupported Mo catalyst from complementary experimental and computational approaches. Temperature resolved X-ray diffraction and X-ray photoemission spectroscopy verify that an oxidic MoO(3 )catalyst precursor undergoes in situ (near-surface) nitridation, upon exposure to reaction conditions at 723 K, rendering Mo2N the actual working catalyst. Density Functional Theory mechanistic investigations on a gamma- Mo 2 N(100) model surface point to a hydrogen-assisted CO dissociation on the nitride surface. Moreover, surface oxygen, evolved from CO dissociation, is predicted to play a central role as hydrogen acceptor, to enable the dehydrogenative NH3 dissociation. Direct condensation of CH and N adspecies proceeds with a low energy barrier of 33 kJ mol(-1), which makes C-N coupling preferred over full hydrogenation of CHx species, in agreement with the experimental modest selectivity to methane (ca. 10 %). Both experimental and computational results indicate that HCN is a major intermediate product along the reaction pathway to acetonitrile. No energetically feasible associative reaction pathways could be identified for C-C coupling from HCN. The dissociation of the latter intermediate product is predicted to precede the reaction of CN adspecies to CHx. Similarly to NH3 dissociation, dehydrogenative HCN activation on the Mo2N 2 N surface is predicted to be facilitated through hydrogen abstraction by surface oxygen species, yet subjected to a comparatively higher energy barrier (>120 kJ mol(-1)), therefore likely to control the overall kinetics. These findings suggest that the enhancement of HCN dissociation is a central design objective towards Mo2N-based 2 N-based catalysts with advanced performance., Parts of this research have received funding support from Conselleria de Educacio de la Generalitat Valenciana (grant number SEJI/2018/011 to G.P.), the Spanish Ministry of Science and Innovation MCIN/AEI, "ERDF A way of making Europe" (grant PID2022-140111OB-I00), and the European Research Council (ERC) under the Horizon 2020 research and innovation programme (grant agreement 864195) . Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Mechanistic DFT calculations were performed on the computational facilities of the Kizilkaya Lab at IZTECH. T. Rodenas (ITQ) is acknowledged for first-principles structural and thermochemistry calculations on MoNx x models and facets, M.D. Soriano (ITQ) for XPS spectra acquisition and the microscopy department of the UPV is acknowledged for access to, and maintenance of, their facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Tandem Catalysis for Selective C1-to-C3 Chain Propagations towards Platform Chemicals Production

  • Andrés Marcos, Eva
[ES] El actual enfoque hacia la desfosilización de la industria química acentúa la necesidad de desarrollar procesos químicos medioambientalmente más sostenibles. El diseño de sistemas catalíticos en tándem para llevar a cabo reacciones mecanísticamente desacopladas en un solo reactor, representa una estrategia prometedora para potencialmente reducir el tamaño de las instalaciones y alcanzar mayores eficiencias energéticas y económicas. El gas de síntesis y sus derivados directos C1 (metanol, DME) representan una atractiva fuente de carbono no derivada del petróleo para la producción de productos químicos. La propagación selectiva de cadena desde compuestos C1 hasta específicamente productos sigue siendo un desafío importante en el campo de la catálisis heterogénea. En esta tesis, se presenta cómo el diseño racional de un sistema catalítico en tándem, multifuncional y heterogéneo, proporciona una ruta novedosa y alternativa para la síntesis directa de productos C3 de interés a partir de compuestos C1. En este trabajo, se ha estudiado la integración en tándem de la reacción de carbonilación de compuestos metoxi (DME) con CO, con la posterior cetonización de los productos carboxílicos C2 intermedios correspondientes en un sistema catalítico multifuncional. La integración de los catalizadores Ag/MOR y Pd/ZrCeOx respectivamente, permite la síntesis directa de acetona a partir de mezclas de DME/gas de síntesis a 548 K y 20 bares. La incorporación de H-FER nanocristalina en un catalizador multifuncional metal/óxido/zeolita Pd/ZrCeOx:FER, como funcionalidad específica de hidrólisis del acetato de metilo, ha permitido la obtención de rendimientos a acetona hasta tres veces mayores en comparación con los obtenidos utilizando solamente el catalizador metal/óxido. La funcionalidad específica de hidrólisis se ha incorporado en base a los resultados de estudios cinéticos realizados para las etapas de reacción por separado, que revelan una limitación general de la velocidad de cetonización a partir del paso de hidrólisis ácida del intermedio acetato de metilo. A una distancia intercatalítica en el rango de micrómetros, se ha mantenido una conversión de DME estable (superior al 94%), junto con una selectividad de acetona del 65-70% (entre los productos orgánicos) durante al menos 10 días de operación continua. Además, la atmósfera de gas de síntesis a alta presión permite la integración de la hidrogenación de grupos carbonilo, abriendo la puerta para la producción de 2-propanol en un solo reactor. En particular, la incorporación del catalizador de hidrogenación Ag-Pt/¿-Al2O3 ha permitido alcanzar una selectividad de 2-propanol del 51% dentro de la fracción de productos C3. Finalmente, el concepto de conversión en tándem mencionado anteriormente se ha extendido a la conversión directa de mezclas de DME/gas de síntesis a propileno. Con este fin, se han desarrollado catalizadores basados en Ag/SiO2 como una funcionalidad de hidrodeshidratación de acetona y se han acoplado al sistema catalítico multifuncional en tándem desarrollado para la producción de acetona. A una temperatura de reacción en el rango de 548-578 K y una presión total de 15 bares, el sistema catalítico en tándem proporciona ratios propileno-a-etileno en el rango 6-9, y selectividades de propileno de hasta el 40%, para una conversión de DME >97%, demostrando que esta ruta de producción es intrínsecamente más selectiva hacia propileno que la mayoría de los procesos de metanol-a-propileno reportados. Además, la temperatura de reacción relativamente suave y el carácter reductor de la atmósfera de gas de síntesis inhiben la deposición de coque, proporcionando un comportamiento estable durante períodos de operación superiores a 214 horas. Aunque se requiere mayor optimización en cuanto al rendimiento a propileno, los resultados abren la puerta a un nuevo proceso para la producción de propileno a partir de materias primas C1, alternativo a los procesos de metanol-a-hidrocarburos., [CA] L'actual enfocament cap a la desfossilització de la indústria química accentua la necessitat de desenvolupar processos químics mediambientalment més sostenibles. En aquest context, el disseny de sistemes catalítics en tàndem per a dur a terme reaccions mecanísticamente desacoblades en un sol reactor, representa una estratègia prometedora per potencialment reduir la grandària de les instal·lacions i aconseguir majors eficiències energètiques i econòmiques. El gas de síntesi i els seus derivats directes C1 (metanol, DME) representen una atractiva font de carboni no derivada del petroli. La propagació selectiva de cadena des de compostos C1 fins específicament productes C3 continua sent un desafiament important en el camp de la catàlisi heterogènia. En aquesta tesi, es presenta com el disseny racional d'un sistema catalític en tàndem, multifuncional i heterogeni, proporciona una ruta nova i alternativa per a la síntesi directa de productes C3 d'interés a partir de compostos C1. En aquest treball, s'ha estudiat la integració en tàndem de la reacció de carbonilació de compostos metoxi (DME) amb CO, amb la posterior cetonització dels productes carboxílics C2 intermedis corresponents en un sistema catalític multifuncional. La integració dels catalitzadors Ag/MOR i Pd/ZrCeOx respectivament, permet la síntesi directa d'acetona a partir de mescles de DME/gas de síntesi a 548 K i 20 bars. La incorporació d'H-FER nanocristalina en un catalitzador multifuncional metall/òxid/zeolita Pd/ZrCeOx:FER, com a funcionalitat específica d'hidròlisi de l'acetat de metil, intermedi en el procés global, ha permés l'obtenció de rendiments a acetona fins a tres vegades majors en comparació amb els obtinguts utilitzant solament el catalitzador metall/òxid, Pd/ZrCeOx. La funcionalitat específica d'hidròlisi s'ha incorporat sobre la base dels resultats d'estudis cinètics realitzats per a les etapes de reacció per separat, que revelen una limitació general de la velocitat de cetonització a partir del pas d'hidròlisi àcida de l'intermediari acetat de metil. A una distància intercatalítica en el rang de micròmetres, s'ha mantingut una conversió de DME estable (superior al 94%), juntament amb una selectivitat d'acetona del 65-70% (entre tots els productes orgànics) durant almenys 10 dies d'operació contínua. A més, l'atmosfera de gas de síntesi a alta pressió permet la integració de la hidrogenació de grups carbonil, obrint la porta per a la producció no sols d'acetona, sinó també de 2-propanol en un sol reactor. En particular, la incorporació del catalitzador d'hidrogenació Ag-Pt/¿-Al2O3 ha permés aconseguir una selectivitat de 2-propanol del 51% dins de la fracció de productes C3 (és a dir, acetona, 2-propanol, propà i propilé). Finalment, el concepte de conversió en tàndem esmentat anteriorment s'ha estés a la conversió directa de mescles de DME/gas de síntesi a propilé. A aquest efecte, s'han desenvolupat catalitzadors basats en Ag/SiO2 com una funcionalitat de hidro-deshidratació d'acetona i s'han acoblat al sistema catalític multifuncional en tàndem desenvolupat per a la producció d'acetona. A una temperatura de reacció en el rang de 548-578 K i una pressió total de 15 bars, el sistema catalític multifuncional en tàndem proporciona ràtios propilé-a-etilé en el rang 6-9, i selectivitats de propilé de fins al 40%, per a una conversió de DME >97%, demostrant que aquesta ruta de producció és intrínsecament més selectiva cap a propilé que la majoria dels processos de metanol-a-propilé reportats. A més, la temperatura de reacció relativament suau i el caràcter reductor de l'atmosfera de gas de síntesi inhibixen la deposició de coc, proporcionant un comportament estable durant períodes d'operació superiors a 214 hores. Encara que es requereix una major optimització quant al rendiment a propilé, els resultats obrin la porta a un nou procés per a la producció de propilé a partir de matèries primeres C1, alternatiu als processos de metanol-a-hidrocarburs., [EN] The present focus on advancing towards a defossilized chemical industry underscores the need for developing more environmentally sustainable chemical processes. In this context, the design of tandem-catalytic systems to steer mechanistically decoupled reactions in a cascade fashion, in a single reactor, represents a promising strategy for potentially reduce the installed size of chemical processes and attain higher energy- and cost-efficiencies. Synthesis gas and its direct C1 derivatives (methanol, DME), represent an attractive non-petroleum derived carbon source for the production of commodity chemicals. The selective chain propagation from C1 building blocks to specifically C3 compounds has been demonstrated through biocatalytic routes, however it remains an important challenge for heterogeneous catalysis. In this thesis, we report how the design and engineering of a multifunctional, heterogeneous tandem-catalytic system provides a novel and alternative route for the direct synthesis of C3 compounds from C1 building blocks. The selective obtention of C2+ products with specific chain lengths, surpassing the inherently non-selective C-C chain propagation characteristic of Fischer-Tropsch polymerization reactions, poses a significant challenge. In this work, the tandem integration of the reaction of carbonylation of methoxy compounds (DME) with CO, with subsequent ketonisation of the corresponding C2 carboxylic intermediate products on a multifunctional catalytic system is reported. The integration of an optimized Ag/MOR and Pd/ZrCeOx catalysts, respectively, allows the direct synthesis of acetone from DME/syngas mixtures at 548 K and 20 bar. Enhanced acetone time-yields, i.e. by a factor greater than three, have been obtained by incorporation of nanosized H-FER, as a specific ester hydrolysis functionality in a Pd/ZrCeOx:FER metal/oxide/zeolite multifunctional ketonisation composite catalyst. The specific hydrolysis functionality was implemented based on insights from kinetic studies on the individual reaction steps revealing overall ketonisation rate limitation from the methyl acetate intermediate acid-catalysed hydrolysis step. At the micro-meter range carbonylation/ketonisation intercatalysts spacing, a noticeably stable DME conversion (of >94%), alongside ca. 65-70% acetone selectivity (within all organic products) has been sustained for at least 10 days on-stream. Furthermore, the high-pressure syngas atmosphere allows integrating the hydrogenation of carbonyl groups therefore opening the door for the production of not only acetone but also 2-propanol in a single reactor. Particularly, Ag-Pt/¿-Al2O3 hydrogenation catalyst afforded reaching a 2-propanol selectivity of 51% within the C3 products fraction (i.e. acetone, 2-propanol, propane and propylene). Finally, the above tandem conversion concept has been extended to the direct conversion of DME/syngas mixtures to propylene. To this end, Ag/SiO2 catalysts have been developed as an acetone hydrodehydration functionality and coupled to the multifunctional catalytic-tandem system developed for acetone production from DME/syngas mixtures. At a reaction temperature in the range of 548-578 K and a total pressure of 15 bar, the multifunctional catalytic system affords a remarkably high propylene-to-ethylene molar ratio of 6-9 and overall propylene selectivities up to 40%, at essentially full DME conversion (>97%), proving this production route intrinsically more selective to propylene than most of methanol-to-propylene processes. Moreover, the comparatively mild reaction temperature and the reducing character of the syngas atmosphere inhibit coke deposition, leading to stable performance for times-on-stream in excess of 214 hours. While future improvements in propylene time-yield will be required, the results open the door to a new process for propylene production from C1 feedstocks, alternative to methanol-to-hydrocarbons processes., I would like to thank the Spanish Ministry of Science, Innovation and Universities (MCIU) for my FPU fellowship (FPU17/04751) and the European Research Council (ERC) under the Horizon 2020 research and innovation program (ERC-CoG- TANDEng; grant agreement 864195), which have made possible the realization of this thesis. BASF SE (Ludwigshafen, Germany) is gratefully acknowledged for their support to fundamental research efforts in catalysis, a portion of which has contributed to the outcomes presented in this PhD thesis. I would also like to thank the Spanish Research Council (CSIC) and, particularly, the Institute of Chemical Technology (ITQ), for providing the infrastructure where I have developed my PhD work. Next, I want to thank the Massachusetts Institute of Technology (MIT) for giving me access to their facilities during my short PhD research stay, and to the ALBA synchrotron, especially to the CLÆSS beamline, for the several beamtimes granted. Finally, I would like to thank the department of Chemical and Nuclear Engineering (DIQN) of the Polytechnic University of Valencia (UPV), for hosting me as a teaching assistant over these years
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct Conversion of Syngas to Higher Alcohols via Tandem Integration of Fischer–Tropsch Synthesis and Reductive Hydroformylation

  • Jeske, Kai
  • Rösler, Thorsten
  • Belleflamme, Maurice
  • Rodenas, Tania
  • Fischer, Nico
  • Claeys, Michael
  • Leitner, Walter
  • Vorholt, Andreas J.
  • Prieto, Gonzalo
The selective conversion of syngas to higher alcohols is an attractive albeit elusive route in the quest for effective production of chemicals from alternative carbon resources. We report the tandem integration of solid cobalt Fischer–Tropsch and molecular hydroformylation catalysts in a one-pot slurry-phase process. Unprecedented selectivities (>50 wt %) to C alcohols are achieved at CO conversion levels >70 %, alongside negligible CO side-production. The efficient overall transformation is enabled by catalyst engineering, bridging gaps in operation temperature and intrinsic selectivity which have classically precluded integration of these reactions in a single conversion step. Swift capture of 1-olefin Fischer–Tropsch primary products by the molecular hydroformylation catalyst, presumably within the pores of the solid catalyst is key for high alcohol selectivity. The results underscore that controlled cooperation between solid aggregate and soluble molecular metal catalysts, which pertain to traditionally dichotomic realms of heterogeneous and homogeneous catalysis, is a promising blueprint toward selective conversion processes., This work received funding from the German Ministry for Education and Research (BMBF, 01DG17019 CAT2BIOL) and the European Research Council (ERC-2019-COG 864195, TANDEng). Parts of this research have also received funding from the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100), the EU Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL) and the Max Planck Society. W.L. acknowledges the “Fuel Science Center”, funded by the German Research Foundation (DFG) (grant Nr. 390919832), for continuing support. Sasol and Eurosupport are thanked for the provision of Al2O3 precursors. Prof. F. Schüth (MPI-KOFO) is gratefully thanked for lab space allocation and supportive access to research instrumentation. A. Gurowski (MPI-CEC), N. Pfänder (MPI-CEC), V. Dietl (MPI-KOFO) and M. Fadlalla (UCT) are acknowledged for contributions to ICP-MS, STEM/EDS, offline GC and 2DGC analyses, respectively. Staff of the EM unit at the UPV are acknowledged for technical assistance with microscopy characterization. Open Access funding enabled and organized by Projekt DEAL.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Multifunctional materials for catalyst-specific heating and thermometry in tandem catalysis

  • Farpón, Marcos G.
  • Peláez, Raquel
  • Recio, Verónica
  • Atakan, Burak
  • Zaldo, Carlos
  • Prieto, Gonzalo
A multifunctional material design, integrating catalytic as well as auxiliary magnetic susception and contactless thermal sensing functionalities, unlocks catalyst-specific heating and thermometry for spatially proximate solid catalysts in a single reactor. The new concept alleviates temperature incompatibilities in tandem catalysis, as showcased for the direct production of propene from ethene, via sequential olefin dimerization and metathesis reactions., This research has received funding from the Spanish Ministry of Science and Innovation (projects ERC2018-092838 and PID2021-128090OB-C21) and the European Research Council (ERC) under the Horizon 2020 research and innovation programme (ERC-CoG-TANDEng; grant agreement 864195). M. G. F. acknowledges support by the Spanish Ministry of Education through predoctoral grant FPU17/04701. R. P. acknowledges support by the Conselleria Valenciana de Innovación, Universidades, Ciencia y Sociedad Digital through postdoctoral fellowship CIAPOS/2021/92. P. Marín (Univ. Oviedo) and A. M. Luque (ITQ) are acknowledged for contributions to the development of the meshed geometry and model for CFD simulations, and C. Cascales (ICMM) for discussions on phosphor design. XAS experiments were performed at the CLÆSS beamline at ALBA Synchrotron (Barcelona, Spain) with the collaboration of ALBA staff. W. Henao, C. Marini and G. Agostini are acknowledged for guidance with data collection and XAS data reduction. E. Torregrosa (ITQ) is acknowledged for assistance with induction heating experiments., Peer reviewed