Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave Photonic Filtering for Interrogating FBG-Based Multicore Fiber Curvature Sensor

  • Zheng, Di
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Capmany Francoy, José|||0000-0002-6460-4167
[EN] We propose and experimentally demonstrate an approach to perform high-resolution and temperature-insensitive interrogation of a fiber Bragg grating (FBG)-based multicore fiber (MCF) curvature sensor using a microwave photonics filtering technique. By combining two reflected sample signals from the two FBGs inscribed in MCF and a dispersion device, a two-tap notch microwave photonic filter (MPF) is formed. The notch frequency of MPF is dependent on the time delay difference between the two FBG reflected signals, which is related to wavelength spacing of the two FBGs. Due to the wavelength spacing of the two FBGs is proportional to the curvature, the curvature can be readily interrogated by monitoring the notch frequency of MPF. The proposed interrogation scheme with the sensitivity of 92 MHz/m(-1) is achieved, whilst the sensitivity can be easily adjusted. Moreover, the proposed interrogation scheme is temperature insensitive., This work was supported in part by the National Natural Science Foundation of China under Grant 61405166 and Grant 61775185, in part by the China Scholarship Council, in part by the Generalitat Valenciana under Grant APOSTD/2016/015 and Grant GVA PROMETEO 2013/012, and in part by the Ministerio de Economia y Competitividad under Grant TEC2014-60378-C2-1-R. (Corresponding author: Di Zheng.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strongly coupled multicore fiber with FBGs for multipoint and multiparameter sensing

  • Liu, Zhiming
  • Zheng, Di
  • Villatoro, Joel
  • Antonio-Lopez, Enrique
  • Schuelzgen, Axel
  • Amezcua-Correa, Rodrigo
  • Zou, Xihua
  • Pan, Wei
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] A compact optical fiber sensor by embedding fiber Bragg gratings (FBGs) in strongly coupled multicore fiber (SCMCF) is proposed for multipoint and multiparameter sensing. To build the device, two FBGs with different peak wavelengths were inscribed in a segment of SCMCF. Then one end of the SCMCF was fusion spliced to a single-mode fiber (SMF) and the other end of the SCMCF was cleaved. In the SMF-SCMCF structure, two supermodes are excited, as a result, the reflection spectrum exhibits a sinusoidal pattern with two sharp peaks. The wavelength position of the FBGs and the supermode coupler can be extracted simultaneously. Two distinct FBGs inscribed in different positions of the SCMCF were used to demonstrate quasi-distributed multipoint sensing in the proposed structure. To the best of our knowledge, this is the first demonstration of an optical fiber sensor that combines FBGs with SCMCF. The sensor here proposed has the advantage of compact size, low-cost, good mechanical strength and ease of interrogation., This work was supported in part by National Key Research and Development Program of China (2019YFB2203204), National Natural Science Foundation of China (61922069, 61775185), the "111" Plan (B18045), Sichuan Science and Technology Program (2020YJ0329), and the Spanish Ministry of Economy and Competitiveness under the project DIMENSION TEC2017 88029-R. J.V. acknowledges funding from the Fondo Europeo de Desarrollo Regional (FEDER) and the Ministerio de Economia y Competitividad (Spain) under project PGC2018-101997-B-I00. Document
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating

  • Zheng, D.
  • Cai, Z.
  • Floris, Ignazio
  • Pan, W.
  • Zou, X.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This Letter presents a simple temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating (ECFBG). By partly inserting an ECFBG into a ceramic ferrule, the reflection spectrum of the ECFBG splits into two peaks as a result of the applied tilt angle. The magnitude and direction of inclination in one dimension can be determined by monitoring the wavelength separation between both peaks, which is inherently insensitive to temperature. The proposed tilt sensor has a good linear response within a wide dynamic range of +/- 45 degrees, with a sensitivity of 0.012 nm/degrees, with a resolution of 0.83 degrees, and with an accuracy of 0.41 degrees. Being free from any inherent mechanical joint/friction, along with the advantages of a compact structure, good repeatability, and low cost, the proposed sensor is highly suitable for practical engineering applications. (C) 2019 Optical Society of America, National Natural Science Foundation of China (61405166, 61775185); Sichuan Province Science and Technology Support Program (2018HH0002); Higher Education Discipline Innovation Project (B18045); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Horizon 2020 Framework Programme (722509).