Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strongly coupled multicore fiber with FBGs for multipoint and multiparameter sensing

  • Liu, Zhiming
  • Zheng, Di
  • Villatoro, Joel
  • Antonio-Lopez, Enrique
  • Schuelzgen, Axel
  • Amezcua-Correa, Rodrigo
  • Zou, Xihua
  • Pan, Wei
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] A compact optical fiber sensor by embedding fiber Bragg gratings (FBGs) in strongly coupled multicore fiber (SCMCF) is proposed for multipoint and multiparameter sensing. To build the device, two FBGs with different peak wavelengths were inscribed in a segment of SCMCF. Then one end of the SCMCF was fusion spliced to a single-mode fiber (SMF) and the other end of the SCMCF was cleaved. In the SMF-SCMCF structure, two supermodes are excited, as a result, the reflection spectrum exhibits a sinusoidal pattern with two sharp peaks. The wavelength position of the FBGs and the supermode coupler can be extracted simultaneously. Two distinct FBGs inscribed in different positions of the SCMCF were used to demonstrate quasi-distributed multipoint sensing in the proposed structure. To the best of our knowledge, this is the first demonstration of an optical fiber sensor that combines FBGs with SCMCF. The sensor here proposed has the advantage of compact size, low-cost, good mechanical strength and ease of interrogation., This work was supported in part by National Key Research and Development Program of China (2019YFB2203204), National Natural Science Foundation of China (61922069, 61775185), the "111" Plan (B18045), Sichuan Science and Technology Program (2020YJ0329), and the Spanish Ministry of Economy and Competitiveness under the project DIMENSION TEC2017 88029-R. J.V. acknowledges funding from the Fondo Europeo de Desarrollo Regional (FEDER) and the Ministerio de Economia y Competitividad (Spain) under project PGC2018-101997-B-I00. Document
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Temperature-insensitive curvature sensor based on Bragg gratings written in strongly coupled multicore fiber

  • Liu, Zhiming
  • Zheng, Di
  • Villatoro, Joel
  • Antonio-Lopez, J. Enrique
  • Schülzgen, Axel
  • Amezcua-Correa, Rodrigo
  • Zou, Xihua
  • Pan, Wei
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] A novel temperature-insensitive optical curvature sensor has been proposed and demonstrated. The sensor is fabricated by inscribing fiber Bragg gratings with short lengths into a piece of strongly coupled multicore fiber (SCMCF) and spliced to the conventional single-mode fiber. Due to the two supermodes being supported by the SCMCF, two resonance peaks, along with a deep notch between them, were observed in the reflection spectrum. The experimental results show that the depth of the notch changes with the curvature with a sensitivity up to 15.9dB/m-1 in a lower curvature range. Besides, thanks to the unique property of the proposed sensor, the notch depth barely changes with temperature. Based on the intensity demodulation of the notch depth, the temperature-insensitive curvature sensor is achieved with the cross sensitivity between the temperature, and the curvature is as low as 0.001m-1/¿C., National Natural Science Foundation of China (62071395); the 111 Project (B18045); Sichuan Province Science and Technology Support Program (2020YJ0329); Universitat Politècnica de València (PAID-01-18); Ministerio de Economía y Competitividad (PGC2018-101997-B-I00, TEC2017-88029-R).