Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Determination of the interfacial energies in chemical guiding patterns for directed self-assembly of block co-polymers

  • Evangelio, Laura
  • Lorenzoni, Matteo
  • Fraxedas, J.
  • Perez Murano, Francesc X.
Trabajo presentado a la 41st International Conference on Micro and Nano Engineering, celebrada en Hague (Netherlands) del 21 al 24 de septiembre de 2015., Directed self-assembly (DSA) of block co-polymers allows the generation of high-resolution patterns at wafer scale level. The characteristic feature size of the final pattern is dictated by the molecular weight of the block co-polymer, while its orientation is prompted by the pre-definition of guiding patterns on the surface. In chemical epitaxy DSA, the guiding patterns are defined as areas of the surface of varied chemical strength (affinity) with the blocks forming the co-polymer. In this communication, we present a method to experimentally determine the interface energies and a quantitative estimation between surface affinity strength and guidance capability of the chemical patterns. We use PS-b-PMMA as block copolymer and PS-OH as brush layer. Chemical guiding patterns are created by selective exposure of the brush layer to oxygen plasma]. The difference of surface free energy of each segment of the copolymer with the confining boundary (γSA - γSB), is the main driving force in chemical epitaxy DSA. It is experimentally estimated from de-wetting experiments using blends of homopolymers, which are performed under the same conditions than the ones used for DSA of as block copolymers. When thermally annealed, the two immiscible homopolymers exhibit phase separation and the contact angle ΦAB between both polymers (A and B) and the substrate (S) can be obtained (see figure 1). Then, the interfacial energy (Δγ) can be estimated by Youngís equation: Δγ = γSA - γSB = γAB.cos(ΦAB) where γSA and γSB are the interface tension between homopolymers A and B with the substrate, and γSA is the interface tension between both polymers, which depends on the annealing temperature. Figure 2 shows the typical morphology for a blend of PS/PMMA polymers on a pristine PSOH surface (a) and on a PS-OH surface chemically modified by oxygen plasma exposure (b). After selective removal of PMMA, the contact angle is estimated from cross-sectional SEM images. The properties of the formed droplet are further investigated by atomic force microscopy employing Peak ForceTM tapping mode. This technique allows the acquisition of multiple force distance curves with improved force resolution (0.1-10 nN), with real time calculation of mechanical properties at each point. Mechanical properties such as adhesion force and surface stiffness of polymer blends are mapped with nanometric resolution as shown in Figure 3. Two examples of the relevance of the interface energy in chemical epitaxy DSA are shown in figure 4 where the guiding stripes are defined by soft or strong oxygen plasma. A pristine PS-OH layer presents preferential affinity to the PS block. When it is exposed to oxygen plasma, it becomes more attractive to PMMA, being the affinity larger when the plasma is stronger (higher power and longer exposure time). As a result. two completely different morphologies of the DSA patterns are obtained: for the soft plasma case, we obtain vertical lamella oriented in the direction of the guiding stripes while for the strong oxygen plasma exposure, the PS-b-PMMA lamella are placed parallel to the substrate above the guiding stripes and turn vertical with perpendicular orientation above the non-guiding stripes. Quantitative results of the interface energy and a more complete investigation of their relation with the guiding pattern efficiency will be presented at the conference., The research leading to these results received funding from the European Unionís Seventh Framework Programme FP7/2007-2013, under project CoLiSA. L. Evangelio acknowledges MECD for the PhD contract FPU13/03746., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identifying the nature of surface chemical modification for directed self-assembly of block copolymers

  • Evangelio, Laura
  • Gramazio, Federico
  • Lorenzoni, Matteo
  • Gorgoi, Michaela
  • Espinosa, Francisco M.
  • García García, Ricardo
  • Perez Murano, Francesc X.
  • Fraxedas, J.
In recent years, block copolymer lithography has emerged as a viable alternative technology for advanced lithography. In chemicalepitaxy- directed self-assembly, the interfacial energy between the substrate and each block copolymer domain plays a key role on the final ordering. Here, we focus on the experimental characterization of the chemical interactions that occur at the interface built between different chemical guiding patterns and the domains of the block copolymers. We have chosen hard X-ray high kinetic energy photoelectron spectroscopy as an exploration technique because it provides information on the electronic structure of buried interfaces. The outcome of the characterization sheds light onto key aspects of directed self-assembly: grafted brush layer, chemical pattern creation and brush/block co-polymer interface., The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) within the projects CoLiSA (FP7-ICT-2013-11) and SNM (FP7-ICT-2011-8) and from MINECO (Nanointegra, TEC2015-69864-R). Financial support under the CALIPSO Programme (HZBPHOTONS_CALIPSO-96) is highly appreciated. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and from the CERCA Programme (Generalitat de Catalunya). Ricardo García acknowledges financial support from MAT2013-4458-R. Laura Evangelio acknowledges the Ministry of Education of Spain for her FPU grant (FPU 13/03746).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Identifying the nature of surface chemical modification for directed self-assembly of block copolymers

  • Evangelio Araujo, Laura
  • Gramazio, Federico
  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Gorgoi, Michaela
  • Espinosa, Francisco Miguel
  • García, Ricardo
  • Pérez-Murano, Francesc
  • Fraxedas, Jordi|||0000-0002-2821-4831
In recent years, block copolymer lithography has emerged as a viable alternative technology for advanced lithography. In chemical-epitaxy-directed self-assembly, the interfacial energy between the substrate and each block copolymer domain plays a key role on the final ordering. Here, we focus on the experimental characterization of the chemical interactions that occur at the interface built between different chemical guiding patterns and the domains of the block copolymers. We have chosen hard X-ray high kinetic energy photoelectron spectroscopy as an exploration technique because it provides information on the electronic structure of buried interfaces. The outcome of the characterization sheds light onto key aspects of directed self-assembly: grafted brush layer, chemical pattern creation and brush/block co-polymer interface.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Role of penetrability into a brush-coated surface in directed self-assembly of block copolymers

  • Evangelio Araujo, Laura
  • Fernández Regúlez, Marta
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Müller, Marcus|||0000-0002-7472-973X
  • Pérez Murano, Francesc|||0000-0002-4647-8558
High-density and high-resolution line and space patterns on surfaces are obtained by directed self-assembly of lamella-forming block copolymers (BCPs) using wide-stripe chemical guiding patterns. When the width of the chemical pattern is larger than the half-pitch of the BCP, the interaction energy between each BCP domain and the surface is crucial to obtain the desired segregated film morphology. We investigate how the intermixing between BCPs and polymer brush molecules on the surface influences the optimal surface and interface free energies to obtain a proper BCP alignment. We have found that computational models successfully predict the experimentally obtained guided patterns if the penetrability of the brush layer is taken into account instead of a hard, impenetrable surface. Experiments on directed self-assembly of lamella-forming poly(styrene-block-methyl methacrylate) using chemical guiding patterns corroborate the models used in the simulations, where the values of the surface free energy between the BCP and the guiding and background stripes are accurately determined using an experimental method based on the characterization of contact angles in droplets formed after dewetting of homopolymer blends.