Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Engineering Gram-Negative Microbial Cell Factories Using Transposon Vectors

  • Martínez-García, Esteban
  • Aparicio, Tomás
  • Lorenzo, Víctor de
  • Nikel, Pablo I.
The construction of microbial cell factories à la carte largely depends on specialized molecular biology and synthetic biology tools needed to reprogram bacteria for modifying their existing functions or for bestowing them with new-to-Nature tasks. In this chapter, we document the use of a series of broad-host-range mini-Tn5 vectors for the delivery of gene(s) into the chromosome of Gram-negative bacteria and for the generation of saturated, random mutagenesis libraries for studies of gene function. The application of these tailored mini-transposon vectors, which could also be used for chromosomal engineering of a wide variety of Gram-negative microorganisms, is demonstrated in the platform environmental bacterium Pseudomonas putida KT2440., The work described in this protocol was supported by the CAMBIOS Project of the Spanish Ministry of Economy and Competitiveness (RTC-2014-1777-3), the ST-FLOW (FP7- KBBE- 2011-5-289326), EVOPROG (FP7-ICT-610730), ARISYS (ERC-2012-ADG-322797), and EmPowerPutida (EU-H2020-BIOTEC 2014-2015-6335536) Contracts of the European Union, and the PROMPT Project of the Autonomous Community of Madrid (CAM-S2010/BMD-2414)., CAM-S2010/BMD-2414, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The quest for the minimal bacterial genome

  • Martínez-García, E.
  • Lorenzo, Víctor de
The onset of techniques for both editing extant bacterial chromosomes and synthesizing long DNA sequences has enabled addressing the question on the smallest set of genes and biological functions that are required for running an operative cell. But this is not only a fundamental scientific endeavour: simpler genomes could be easier to understand and eventually reprogram for the sake of diverse applications. This has fostered efforts to eliminate apparently useless — if not annoying DNA segments from many biotechnologically relevant strains as well as attempts to (re)write complete genomes á la carte. Yet, the smallest number of genes that enable given functionalities do vary depending on the ultimate agenda, as both natural and engineered small-size genomes afford genetic simplicity by engaging in a suite of complex interactions with the surrounding medium., This work was supported by the CAMBIOS Project of the Spanish Ministry of Economy and Competitiveness (RTC-2014-1777-3), the EVOPROG (FP7-ICT-610730), ARISYS (ERC-2012-ADG-322797), and EmPowerPutida (EU-H2020-BIOTEC-2014-2015-6335536) Contracts of the European Union, and the PROMPT Project of the Autonomous Community of Madrid (CAM-S2010/BMD-2414)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Physical Forces Shape Group Identity of Swimming Pseudomonas putida Cells

  • Espeso, David R.
  • Martínez García, Esteban
  • Lorenzo, Víctor de
  • Goñi-Moreno, Ángel
The often striking macroscopic patterns developed by motile bacterial populations on agar plates are a consequence of the environmental conditions where the cells grow and spread. Parameters such as medium stiffness and nutrient concentration have been reported to alter cell swimming behavior, while mutual interactions among populations shape collective patterns. One commonly observed occurrence is the mutual inhibition of clonal bacteria when moving toward each other, which results in a distinct halt at a finite distance on the agar matrix before having direct contact. The dynamics behind this phenomenon (i.e., intolerance to mix in time and space with otherwise identical others) has been traditionally explained in terms of cell-to-cell competition/cooperation regarding nutrient availability. In this work, the same scenario has been revisited from an alternative perspective: the effect of the physical mechanics that frame the process, in particular the consequences of collisions between moving bacteria and the semi-solid matrix of the swimming medium. To this end, we set up a simple experimental system in which the swimming patterns of Pseudomonas putida were tested with different geometries and agar concentrations. A computational analysis framework that highlights cell-to-medium interactions was developed to fit experimental observations. Simulated outputs suggested that the medium is compressed in the direction of the bacterial front motion. This phenomenon generates what was termed a compression wave that goes through the medium preceding the swimming population and that determines the visible high-level pattern. Taken together, the data suggested that the mechanical effects of the bacteria moving through the medium created a factual barrier that impedes to merge with neighboring cells swimming from a different site. The resulting divide between otherwise clonal bacteria is thus brought about by physical forces—not genetic or metabolic programs., This work was supported by the EVOPROG (FP7-ICT-610730), ARISYS (ERC-2012-ADG-322797), and EmPowerPutida (EU-H2020-BIOTEC-2014-2015-635536) Contracts of the European Union, and the CAMBIOS (RTC-2014-1777-3) and CONTIBUGS (PCIN-2013-040) Projects of the Spanish Ministry of Economy and Competitiveness., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Iron Uptake Analysis in a Set of Clinical Isolates of Pseudomonas putida

  • Molina Delgado, Lázaro
  • Geoffroy, Valérie A.
  • Segura, Ana
  • Udaondo, Zulema
  • Ramos, Juan L.
Pseudomonas putida strains are frequent inhabitants of soil and aquatic niches and they are occasionally isolated from hospital environments. As the available iron sources in human tissues, edaphic, and aquatic niches are different, we have analyzed iron-uptake related genes in different P. putida strains that were isolated from all these environments. We found that these isolates can be grouped into different clades according to the genetics of siderophore biosynthesis and recycling. The pyoverdine locus of the six P. putida clinical isolates that have so far been completely sequenced, are not closely related; three strains (P. putida HB13667, HB3267, and NBRC14164T) are grouped in Clade I and the other three in Clade II, suggesting possible different origins and evolution. In one clinical strain, P. putida HB4184, the production of siderophores is induced under high osmolarity conditions. The pyoverdine locus in this strain is closely related to that of strain P. putida HB001 which was isolated from sandy shore soil of the Yellow Sea in Korean marine sand, suggesting their possible origin, and evolution. The acquisition of two unique TonB-dependent transporters for xenosiderophore acquisition, similar to those existing in the opportunistic pathogen P. aeruginosa PAO, is an interesting adaptation trait of the clinical strain P. putida H8234 that may confer adaptive advantages under low iron availability conditions., Work in our laboratories was supported by ERANET Pathogenomics program through the ADHERS project (Ref: BIO2008-04419-E) and Fondos FEDER from the European Union through project BIO2010-17227 of the Spanish Ministry of Economy and Competitivity. The work in Abengoa Research was funded by H2020 grant Empowerputida number 65703., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bioremediation 3.0: Engineering pollutant-removing bacteria in the times of systemic biology

  • Dvorak, P.
  • Nikel, Pablo I.
  • Damborsky, Jiri
  • Lorenzo, Víctor de
Elimination or mitigation of the toxic effects of chemical waste released to the environment by industrial and urban activities relies largely on the catalytic activities of microorganisms—specifically bacteria. Given their capacity to evolve rapidly, they have the biochemical power to tackle a large number of molecules mobilized from their geological repositories through human action (e.g., hydrocarbons, heavy metals) or generated through chemical synthesis (e.g., xenobiotic compounds). Whereas naturally occurring microbes already have considerable ability to remove many environmental pollutants with no external intervention, the onset of genetic engineering in the 1980s allowed the possibility of rational design of bacteria to catabolize specific compounds, which could eventually be released into the environment as bioremediation agents. The complexity of this endeavour and the lack of fundamental knowledge nonetheless led to the virtual abandonment of such a recombinant DNA-based bioremediation only a decade later. In a twist of events, the last few years have witnessed the emergence of new systemic fields (including systems and synthetic biology, and metabolic engineering) that allow revisiting the same environmental pollution challenges through fresh and far more powerful approaches. The focus on contaminated sites and chemicals has been broadened by the phenomenal problems of anthropogenic emissions of greenhouse gases and the accumulation of plastic waste on a global scale. In this article, we analyze how contemporary systemic biology is helping to take the design of bioremediation agents back to the core of environmental biotechnology. We inspect a number of recent strategies for catabolic pathway construction and optimization and we bring them together by proposing an engineering workflow., PD is the holder of the Marie Sklodowska-Curie grant No. 704410 (FUTURE). The work in Authors' Laboratory was funded by the CAMBIOS Project of the Spanish Ministry of Economy and CompetitivenessRTC-2014-1777-3 (MINECO), HELIOS Project of the Spanish Ministry of Economy and Competitiveness BIO 2015-66960-C3-2-R (MINECO/FEDER) and the ARISYS (ERC-2012-ADG-322797), EmPowerPutida (EU-H2020-BIOTEC-2014-2015-6335536), and Raft4Biotech (720776) contracts of the European Union. JD is supported also by the Czech Ministry of Education (LQ1605, LO1214, LM2015055), and Czech Grant Agency (GA16-06096S)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A post-translational metabolic switch enables complete decoupling of bacterial growth from biopolymer production in engineered Escherichia coli

  • Durante-Rodríguez, Gonzalo
  • Lorenzo, Víctor de
  • Nikel, Pablo I.
43 p.-7 fig., Most of the current methods for controlling the formation rate of a key protein or enzyme in cell factories rely on the manipulation of target genes within the pathway. In this article, we present a novel synthetic system for post-translational regulation of protein levels, FENIX, which provides both independent control of the steady-state protein level and inducible accumulation of target proteins. The FENIX device is based on the constitutive, proteasome-dependent degradation of the target polypeptide by tagging with a short synthetic, hybrid NIa/SsrA amino acid sequence in the C-terminal domain. Protein production is triggered via addition of an orthogonal inducer ( i.e., 3-methylbenzoate) to the culture medium. The system was benchmarked in Escherichia coli by tagging two fluorescent proteins (GFP and mCherry), and further exploited to completely uncouple poly(3-hydroxybutyrate) (PHB) accumulation from bacterial growth. By tagging PhaA (3-ketoacyl-CoA thiolase, first step of the route), a dynamic metabolic switch at the acetyl-coenzyme A node was established in such a way that this metabolic precursor could be effectively redirected into PHB formation upon activation of the system. The engineered E. coli strain reached a very high specific rate of PHB accumulation (0.4 h-1) with a polymer content of ca. 72% (w/w) in glucose cultures in a growth-independent mode. Thus, FENIX enables dynamic control of metabolic fluxes in bacterial cell factories by establishing post-translational synthetic switches in the pathway of interest., This study was supported by The Novo Nordisk Foundation (Grant NNF10CC1016517) and the Danish Council for Independent Research (SWEET, DFF-Research Project 8021-00039B) to P.I.N. This study was also supported by the HELIOS Project of the Spanish Ministry of Economy and Competitiveness BIO2015-66960-C3-2-R (MINECO/FEDER), and the ARISYS (ERC-2012-ADG-322797), EmPowerPutida (EUH2020-BIOTEC-2014-2015-6335536), and MADONNA (H2020-FET-OPEN-RIA-2017-1-766975) contracts of the European Union to V.D.L., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-quality genome-scale metabolic modelling of Pseudomonas putida highlights its broad metabolic capabilities

  • Nogales, Juan
  • Mueller, J.
  • Gudmundsson, S.
  • Canalejo, F. J.
  • Duque, Estrella
  • Monk, J
  • Feist, Adam M.
  • Ramos, Juan L.
  • Niu, W
  • Palsson, Bernhard Ø
Genome "scale reconstructions of metabolism are computational species" specific knowledge bases able to compute systemic metabolic properties. We present a comprehensive and validated reconstruction of the biotechnologically relevant bacterium Pseudomonas putida KT2440 that greatly expands computable predictions of its metabolic states. The reconstruction represents a significant reactome expansion over available reconstructed bacterial metabolic networks. Specifically, iJN1462 (i) incorporates several hundred additional genes and associated reactions resulting in new predictive capabilities, including new nutrients supporting growth; (ii) was validated by in vivo growth screens that included previously untested carbon (48) and nitrogen (41) sources; (iii) yielded gene essentiality predictions showing large accuracy when compared with a knock¿out library and Bar¿seq data; and (iv) allowed mapping of its network to 82 P. putida sequenced strains revealing functional core that reflect the large metabolic versatility of this species, including aromatic compounds derived from lignin. Thus, this study provides a thoroughly updated metabolic reconstruction and new computable phenotypes for P. putida, which can be leveraged as a first step toward understanding the pan metabolic capabilities of Pseudomonas., H2020 Future and Emerging Technologies. Grant Number: 686585 H2020 LEIT Biotechnology. Grant Numbers: 635536, 814650 Ministerio de Economía y Competitividad. Grant Numbers: BIO2014‐59528‐JIN, RTI‐2018‐094370‐B‐I00 National Science Foundation Graduate Research Fellowship Program. Grant Number: 1610400 Novo Nordisk. Grant Number: NNF10CC1016517 U.S. Department of Energy. Grant Number: DE‐AC02‐05CH11231
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SEVA 3.1: enabling interoperability of DNA assembly among the SEVA, BioBricks and Type IIS restriction enzyme standards

  • Damalas, Stamatios G.
  • Batianis, Christos
  • Martin‐Pascual, Maria
  • Lorenzo, Víctor de
  • Martins dos Santos, Vitor AP
© 2020 The Authors., Robust synthetic biology applications rely heavily on the design and assembly of DNA parts with specific functionalities based on engineering principles. However, the assembly standards adopted by different communities vary considerably, thus limiting the interoperability of parts, vectors and methods. We hereby introduce the SEVA 3.1 platform consisting of the SEVA 3.1 vectors and the Golden Gate‐based ‘SevaBrick Assembly’. This platform enables the convergence of standard processes between the SEVA platform, the BioBricks and the Type IIs‐mediated DNA assemblies to reduce complexity and optimize compatibility between parts and methods. It features a wide library of cloning vectors along with a core set of standard SevaBrick primers that allow multipart assembly and exchange of short functional genetic elements (promoters, RBSs) with minimal cloning and design effort. As proof of concept, we constructed, among others, multiple sfGFP expression vectors under the control of eight RBSs, eight promoters and four origins of replication as well as an inducible four‐gene operon expressing the biosynthetic genes for the black pigment proviolacein. To demonstrate the interoperability of the SEVA 3.1 vectors, all constructs were characterized in both Pseudomonas putida and Escherichia coli. In summary, the SEVA 3.1 platform optimizes compatibility and modularity of inserts and backbones with a cost‐ and time‐friendly DNA assembly method, substantially expanding the toolbox for successful synthetic biology applications in Gram‐negative bacteria., Funding was provided by European Union’s Horizon2020 Research and Innovation Programme under grant agreement Nos. 635536 (EmPowerPutida) and 730976 (IBISBA) to V.A.P.M.d.S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spatial organization of the gene expression hardware in Pseudomonas putida

  • Kim, Juhyun
  • Goñi-Moreno, Ángel
  • Calles, Belén
  • Lorenzo, Víctor de
The localization of ribosomes, RNA polymerase (RNAP) and the nucleoid of Pseudomonas putida cells has been inspected with genetic, microscopical and physiological approaches. To this end, strains of P. putida were constructed with fluorescent tags to either ribosomal proteins or the RNAP or both. Their relative positions in respect to the bacterial DNA revealed the separation of the ribosomal pool from the nucleoid, which however co-localized entirely with the tridimensional distribution of RNAP. This split was kept under all growth conditions: exponential versus stationary and different carbon sources. To test the robustness of what appeared to be a phase separation phenomenon, different types of perturbations were entered. In one case, cells were grown under conditions known to accumulate polyhydroxyalkanoate granules that caused a mechanical impact in the cytoplasm – which failed to destroy the split between the translation versus transcription machineries. However, both chloramphenicol and rifampicin blurred – but not eliminated – the boundaries between the phases. The picture that emerges from all these data is not only that the different components of the gene expression hardware are physically divided but also that a large share of the mRNAs ought to move from their site of transcription towards ribosome-rich regions of the cell., This work was funded by the HELIOS Pro-ject of the Spanish Ministry of Science BIO 2015-66960-C3-2-R(MINECO/FEDER), the ARISYS (ERC-2012-ADG-322797),EmPowerPutida (EU-H2020-BIOTEC-2014-2015-6335536) andMADONNA (H2020-FET-OPEN-RIA-2017-1-766975) Contractsof the European Union, InGEMICS-CM (B2017/BMD-3691) contract of the Comunidad de Madrid (FSE, FECER) and Syn-Bio3D (EP/R019002/1) project of the Engineering and PhysicalSciences Research Council (EPSRC, UK). Authors declare noconflict of interest.