Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

High-level production of industrially relevant oxidases by a two-stage fed-batch approach, overcoming catabolite repression in arabinose-inducible Escherichia coli systems

  • Román, Ramón|||0000-0003-2311-2737
  • Lončar, Nikola|||0000-0002-3420-973X
  • Casablancas, Antoni|||0000-0002-0773-9364
  • Fraaije, Marco|||0000-0001-6346-5014
  • González Anadón, Gloria|||0000-0003-3435-3499
With the growing interest in enzyme applications there is an urgent demand for economic affordable and flexible enzyme production processes. In the present paper, we developed a high cell density fed-batch process for the production of two cofactor-containing oxidase, 5-hydroxymethylfurfural oxidase (HMFO) and eugenol oxidase (EUGO). The approach involved the arabinose inducible system to drive the expression while using mineral media. In order to overcome a major drawback of arabinose-inducible promoters, carbon catabolite repression, (CCR) by glucose, we developed a High Cell Density Culture (HCDC), two-stage fed-batch protocol allowing us to reach cell densities exceeding 70 g/L of Dry cell weight (DCW) using glucose as carbon source. Then, induction was achieved by adding arabinose, while changing the carbon source to glycerol. This strategy allowed us to obtain an 8-fold increase in recombinant HMFO titer when compared with a reference batch fermentation in Erlenmeyer flasks using terrific broth (TB), typically used with arabinose inducible strains. The optimized protocol was also tested for expression of a structurally unrelated oxidase, EUGO, where a similar yield was achieved. Clearly, this two-step protocol in which a relatively cheap medium (when compared to TB) can be used, reduces costs and provides a way to obtain protein production levels similar to those of IPTG-based systems.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzymatic glycosylation of bioactive acceptors catalyzed by an immobilized fungal β-xylosidase and its multi-glycoligase variant

  • Murguiondo, Carlos
  • Mestre, Anna
  • Méndez-Líter, Juan A.
  • Nieto-Domínguez, Manuel José
  • Eugenio, Laura I. de
  • Molina-Gutiérrez, María
  • Martínez, María Jesús
  • Prieto Orzanco, Alicia
32 p.-5 fig.-2 tab.-3 fig. supl., A recombinant β-xylosidase (rBxTW1) from the ascomycete Talaromyces amestolkiae and a mutant derived from it, with mostly synthetic activity, have been immobilized as magnetic cross-linked enzyme aggregates (mCLEAs). The mCLEAs of rBxTW1 kept the excellent hydrolytic and O-transxylosylating activities of the free enzyme and had improved thermal and pH stability. The mCLEAs of the mutant also maintained or improved the catalytic properties of the soluble enzyme, synthetizing the O-xylosides of vanillin and (-)-epigallocatechin gallate, and the N- and S-xyloside of 3,5-dibromo-1,2,4-triazole and thiophenol, respectively. The mCLEAs were recyclable across four cycles of synthesis of the O-xylosides through a green and highly selective process. The magnetic properties of the scaffold used for immobilization may allow the easy recovery and reuse of the biocatalyst even from reactions containing insoluble lignocellulosic biomass., This work was funded by the Comunidad de Madrid [RETOPROSOST-2-CM, P2018/EMT-4459] and MICIU/AEI/FEDER [GLYSUS, RTI2018-093683-B-I00]. The authors acknowledge BioSFerA (RIA 884208) and IBISBA1.0 (H2020 730976) projects and the SusPlast-CSIC Interdisciplinary Platform for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

SEVA 3.1: enabling interoperability of DNA assembly among the SEVA, BioBricks and Type IIS restriction enzyme standards

  • Damalas, Stamatios G.
  • Batianis, Christos
  • Martin‐Pascual, Maria
  • Lorenzo, Víctor de
  • Martins dos Santos, Vitor AP
© 2020 The Authors., Robust synthetic biology applications rely heavily on the design and assembly of DNA parts with specific functionalities based on engineering principles. However, the assembly standards adopted by different communities vary considerably, thus limiting the interoperability of parts, vectors and methods. We hereby introduce the SEVA 3.1 platform consisting of the SEVA 3.1 vectors and the Golden Gate‐based ‘SevaBrick Assembly’. This platform enables the convergence of standard processes between the SEVA platform, the BioBricks and the Type IIs‐mediated DNA assemblies to reduce complexity and optimize compatibility between parts and methods. It features a wide library of cloning vectors along with a core set of standard SevaBrick primers that allow multipart assembly and exchange of short functional genetic elements (promoters, RBSs) with minimal cloning and design effort. As proof of concept, we constructed, among others, multiple sfGFP expression vectors under the control of eight RBSs, eight promoters and four origins of replication as well as an inducible four‐gene operon expressing the biosynthetic genes for the black pigment proviolacein. To demonstrate the interoperability of the SEVA 3.1 vectors, all constructs were characterized in both Pseudomonas putida and Escherichia coli. In summary, the SEVA 3.1 platform optimizes compatibility and modularity of inserts and backbones with a cost‐ and time‐friendly DNA assembly method, substantially expanding the toolbox for successful synthetic biology applications in Gram‐negative bacteria., Funding was provided by European Union’s Horizon2020 Research and Innovation Programme under grant agreement Nos. 635536 (EmPowerPutida) and 730976 (IBISBA) to V.A.P.M.d.S.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The architecture of a mixed fungal-bacterial biofilm is modulated by quorum sensing signals, Running title: Quorum sensing mixed fungal-bacterial biofilms

  • Ruiz, Alberto
  • Herráez, Marta
  • Costa-Gutierrez, S.B.
  • Molina Henares, María Antonia
  • Martínez, María Jesús
  • Espinosa-Urgel, Manuel
  • Barriuso, Jorge
39 p.-7 fig.-1 tab., Interkingdom communication is of particular relevance in polymicrobial biofilms. In this work, the ability of the fungus Ophiostoma piceae to form biofilms individually and in consortium with the bacterium Pseudomonas putida, as well as the effect of fungal and bacterial signal molecules on the architecture of the biofilms was evaluated. P. putida KT2440 is able to form biofilms through the secretion of exopolysaccharides and two large extracellular adhesion proteins, LapA and LapF. It has two intercellular signalling systems, one mediated by dodecanoic acid and an orphan LuxR receptor that could participate in the response to AHL‐type quorum sensing molecules (QSMs). Furthermore, the dimorphic fungus O. piceae uses farnesol as QSM to control its yeast to hyphae morphological transition., Results show for the first time the ability of this fungus to form biofilms alone and in mixed cultures with the bacterium. Biofilms were induced by bacterial and fungal QSMs. The essential role of LapA‐LapF proteins in the architecture of biofilms was corroborated, LapA was induced by farnesol and dodecanol, while LapF by 3‐oxo‐C6‐HSL and 3‐oxo‐C12‐HSL. Our results indicate that fungal signals can induce a transient rise in the levels of the secondary messenger c‐di‐GMP, which control biofilm formation and architecture., This work was supported by the Spanish project BIO2015-73697-JIN-AEI/FEDER/UE. M.J. Martínez and J. Barriuso would also like to thank IBISBA1.0 H2020 project 730976 (https://www.ibisba.eu/) and the SusPlast Interdisciplinary platform (http://www.susplastcsic.org/) from the Spanish National Research Council (CSIC), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile lipases from the Candida rugosa-like family: a mechanistic insight using computational approaches

  • Rodríguez-Salarichs, Javier
  • García de Lacoba, Mario
  • Prieto Orzanco, Alicia
  • Martínez, María Jesús
  • Barriuso, Jorge
26 p.-5 fig., Lipases are enzymes able to catalyze the hydrolysis or synthesis of triglycerides, depending on the reaction conditions, whereas sterol esterases show the same ability on sterol esters. Structurally, both kinds of enzymes display an α/β-hydrolase fold, with a substrate-binding pocket formed by a hydrophobic cavity covered by a mobile lid. However, it has been reported that some lipases from the Candida rugosa-like family display wide substrate specificity on both triglycerides and sterol esters. Among them, enzymes with different biotechnological applications, such as the lipase isoenzymes produced by C. rugosa and the sterol esterase from Ophiostoma piceae, have been exhaustively characterized and their crystal structures are available. Differences in substrate affinity among these proteins have been attributed to changes in their hydrophobicity. In this work, we analyzed the full catalytic mechanisms of these proteins using molecular dynamics tools, gaining insight into their mechanistic properties. In addition, we developed an in silico protocol to predict the substrate specificity using C. rugosa and O. piceae lipases as model enzymes and triglycerides and cholesterol esters with different fatty acid chain lengths as model substrates. The protocol was validated by comparing the in silico results with those described in the literature. These results would be useful to perform virtual screening of substrates for enzymes of the C. rugosa-like family with unknown catalytic properties., This work was supported by the Spanish projects BIO2015-73697-JIN from MEICOMP co-financed with FEDER funds and RETOPROSOST2 S/2018/EMT-4459 from Comunidad de Madrid. The authors would also like to thank IBISBA1.0 project (H2020 730976) and the SusPlast-CSIC Interdisciplinary Platform for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Consorcios microbianos en aplicaciones industriales

  • Barriuso, Jorge
1 p., La actividad humana en el planeta genera un gran volumen de residuos que en muchas ocasiones son contaminantes y difíciles de gestionar, entre los más abundantes se encuentran los derivados de la agricultura (e.g. biomasa lignocelulósica) y los derivados de la industria (e.g. CO2 y plásticos). Por otra parte, nuestra actividad productiva necesita disminuir su dependencia del petróleo para obtener productos químicos, materiales y combustibles. En el marco de la economía circular los residuos agro-industriales pueden ser utilizados como sustratos renovables y transformados en productos de valor añadido, como biopolímeros y biocombustibles, utilizando herramientas biotecnológicas.El uso de microorganismos en aplicaciones industriales normalmente se restringe a monocultivos o al uso de sus enzimas de forma aislada. En nuestro laboratorio, utilizando herramientas de la biología sintética y de sistemas, explotamos el potencial de consorcios microbianos compuestos por organismos con distintas capacidades metabólicas. Aprovechamos y fomentamos las capacidades naturales de estos microorganismos para cooperar, estudiamos el comportamiento del microbioma, y diseñamos consorcios “sintéticos” con distintas aplicaciones biotecnológicas.En este trabajo se presentará como hongos saprófitos, con un amplio arsenal de enzimas degradativas,y bacterias ambientales, con un metabolismo versátil, pueden asociarse y coordinar sus actividades metabólicas utilizando mecanismos de comunicación célula a célula conocidos como mecanismos de quorum sensing. Estos consorcios pueden formar biofilms catalíticos, lo que mejora los procesos de biocatálisis degradando residuos agro-industriales y produciendo compuestos de valor añadido. Actualmente trabajamos en la modificación genética y modelado, tanto metabólico como ecológico,de estos consorcios para mejorar su eficacia., Proyectos BIO2015-73697-JIN (MINECO/FEDER), MINECO/FEDER BIO2015-68387-R, CM S2013/MAE-2907, S2018/EMT-4459, IBISBA1.0 (H2020 730976), BioSFerA (H2020 884208) and CO2SMOS (H2020 101000790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Genome sequence and Carbohydrate Active Enzymes (CAZymes) repertoire of the thermophilic Caldicoprobacter algeriensis TH7C1T

  • Ameri, Rihab
  • García, José Luis
  • Derenfed, Amel Bouanane
  • Pradel, Nathalie
  • Neifar, Sawssan
  • Mhiri, Sonia
  • Mezghanni, Monia
  • Jaouadi, Nadia Zaraî
  • Barriuso, Jorge
  • Bejar, Samir
11 p.-3 fig.-3 tab., Background: Omics approaches are widely applied in the field of biology for the discovery of potential CAZymes including whole genome sequencing. The aim of this study was to identify protein encoding genes including CAZymes in order to understand glycans-degrading machinery in the thermophilic Caldicoprobacter algeriensis TH7C1T strain., Results: Caldicoprobacter algeriensis TH7C1T is a thermophilic anaerobic bacterium belonging to the Firmicutes phylum, which grows between the temperatures of 55 °C and 75 °C. Next generation sequencing using Illumina technology was performed on the C. algeriensis strain resulting in 45 contigs with an average GC content of 44.9% and a total length of 2,535,023 bp. Genome annotation reveals 2425 protein-coding genes with 97 ORFs coding CAZymes. Many glycoside hydrolases, carbohydrate esterases and glycosyltransferases genes were found linked to genes encoding oligosaccharide transporters and transcriptional regulators; suggesting that CAZyme encoding genes are organized in clusters involved in polysaccharides degradation and transport. In depth analysis of CAZomes content in C. algeriensis genome unveiled 33 CAZyme gene clusters uncovering new enzyme combinations targeting specific substrates., Conclusions: This study is the first targeting CAZymes repertoire of C. algeriensis, it provides insight to the high potential of identified enzymes for plant biomass degradation and their biotechnological applications., This work was supported by the Tunisian Ministry of Higher Education and Scientific Research (contract program LBMIE-CBS, code: LR15CBS06) and the Algerian-Tunisian R&I Cooperation for the Mixed Laboratories of Scientific Excellence 2021–2024 (Hydro-BIOTECH, code LABEX/TN/DZ/21/01). The high throughput sequencing, assembly and annotation work was supported by the IBISBA1.0 H2020 project 730976 (https://www.ibisba.eu/) at its CSIC Cell Factory node., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Glycosylation of epigallocatechin gallate by engineered glycoside hydrolases from Talaromyces amestolkiae: potential antiproliferative and neuroprotective effect of these molecules

  • Méndez-Líter, Juan A.
  • Pozo-Rodríguez, Ana
  • Madruga, Enrique
  • Rubert, María
  • Santana, Andrés G.
  • Eugenio, Laura I. de
  • Sánchez, Cristina
  • Martínez Gil, Ana
  • Prieto Orzanco, Alicia
  • Martínez, María Jesús
16 p.-6 fig.-2 tab., Glycoside hydrolases (GHs) are enzymes that hydrolyze glycosidic bonds, but some of them can also catalyze the synthesis of glycosides by transglycosylation. However, the yields of this reaction are generally low since the glycosides formed end up being hydrolyzed by these same enzymes. For this reason, mutagenic variants with null or drastically reduced hydrolytic activity have been developed, thus enhancing their synthetic ability. Two mutagenic variants, a glycosynthase engineered from a β-glucosidase (BGL-1-E521G) and a thioglycoligase from a β-xylosidase (BxTW1-E495A), both from the ascomycete Talaromyces amestolkiae, were used to synthesize three novel epigallocatechin gallate (EGCG) glycosides. EGCG is a phenolic compound from green tea known for its antioxidant effects and therapeutic benefits, whose glycosylation could increase its bioavailability and improve its bioactive properties. The glycosynthase BGL-1-E521G produced a β-glucoside and a β-sophoroside of EGCG, while the thioglycoligase BxTW1-E495A formed the β-xyloside of EGCG. Glycosylation occurred in the 5″ and 4″ positions of EGCG, respectively. In this work, the reaction conditions for glycosides’ production were optimized, achieving around 90% conversion of EGCG with BGL-1-E521G and 60% with BxTW1-E495A. The glycosylation of EGCG caused a slight loss of its antioxidant capacity but notably increased its solubility (between 23 and 44 times) and, in the case of glucoside, also improved its thermal stability. All three glycosides showed better antiproliferative properties on breast adenocarcinoma cell line MDA-MB-231 than EGCG, and the glucosylated and sophorylated derivatives induced higher neuroprotection, increasing the viability of SH-S5Y5 neurons exposed to okadaic acid., This research was funded by the MICIU/AEI/FEDER (RTI2018-093683-B-I00), Comunidad de Madrid (RETOPROSOST-2-CM P2018/EMT-4459), CSIC Interdisciplinary Thematic Platform (PTI+) NEURO-AGING+ (PTI-NEURO-AGING+), and PI20/00590 Instituto de Salud Carlos III. The authors acknowledge BioSFerA (RIA 884208) and IBISBA1.0 (H2020 730976) projects for the suppor, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Expresión de PET hidrolasas en chasis no convencionales

  • Molpeceres García, Francisco Javier
  • Salas, Felipe de
  • Galindo, Sara
  • Sanz, David
  • Barriuso, Jorge
1 p., La contaminación por plásticos supone un gran problema medioambiental. Actualmente, el tratamiento y reciclado de estos residuos depende de técnicas físico químicas no sostenibles y poco eficientes. Ante esto, las técnicas biológicas, basadas en el empleo de microorganismos y enzimas, surgen como una alternativa. Uno de los plásticos más comercializados es el tereftalato de polietileno (PET), un polímero compuesto de ácido tereftálico y etilenglicol. El PET puede ser degradado por diferentes enzimas, entre las cuales destacan las cutinasas del tipo PETasa y MHETasa. El empleo de estas cutinasas abre una nueva vía para la revalorización de este plástico en el contexto de la economía circular. En nuestro grupo trabajamos en la caracterización de distintas PETasas para posteriormente introducirlas en microorganismos capaces de emplear los productos de degradación del PET como sustrato. Además buscamos microorganismos no convencionales que sean capaces de producir a través de su metabolismo compuestos de valor añadido como biopolímeros y bioplásticos, por ejemplo Pseudomonas putida, Comamonas testosteroni o Delftia sp. que son capaces de producir polihidroxialcanoato (PHA) y polihidroxibutirato (PHB). Para desarrollar estas nuevas cepas de microorganismos y que puedan expresar heterólogamente las enzimas, se selecciona el vector más apropiado en función de la bacteria hospedadora y se clonan los genes sintéticos a los cuales se les optimiza el uso codones. Una vez clonada la construcción se ajustan las condiciones de cultivo de las cepas para optimizar la secreción de las PETasas., Este trabajo ha sido financiado por el proyecto Europeo IBISBA “Industrial Biotechnology Innovation and Synthetic Biology Accelerator” Grant Agreement 730976 y el proyecto nacional del Ministerio de Ciencia e Innovación MICODE “Consorcios microbianos para la degradación de plásticos convencionales” PID2020-114210RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards polyethylene terephthalate valorisation into PHB using an engineered Comamonas testosteroni strain

  • Molpeceres García, Francisco Javier
  • Sanz, David
  • García Miró, Alejandro
  • Prieto Orzanco, Alicia
  • Barriuso, Jorge
9 p.-5 fig., The abundant production of plastic materials, coupled with their recalcitrant nature, makes plastic waste a major challenge as a pollutant. Polyethylene terephthalate (PET) is a polyester formed by polycondensation of terephthalic acid (TPA) and ethylene glycol (EG). This plastic polymer can be completely depolymerized to its monomers using microbial enzymes. In this study, we verified in silico and in vivo that the bacterium Comamonas testosteroni RW31 is able to assimilate TPA and to produce the bioplastic polyhydroxybutyrate (PHB). This bacterium was engineered to heterologously express a fusion of the PET-degrading enzymes FAST-PETase and IsMHETase. We verified that our strain successfully secretes the enzymes and depolymerize PET both in vitro and in vivo, achieving a weight loss of 37.1 % and 0.83 %, respectively. We also studied its capacity to form biofilm. Furthermore, our strain can employ bis(2-hydroxyethyl) terephthalate (BHET), an intermediate of PET degradation, as feedstock to accumulate PHB up to 12.03 % of its dry weight in 14 h. Our findings highlight C. testosteroni RW31 as a promising chassis for synthetic biology strategies aimed at upcycling PET waste., This work was supported by the Spanish projects MICODE (PID2020-114210RB-I00 MCIN/AEI) and DEMO (MCIN/AEI/“NextGenerationEU”/PRTR, TED2021-130096B-I00). The authors would also like to thank IBISBA1.0 project (H2020 730976), the SusPlast-CSIC Interdisciplinary Platform, and the LifeHub-CSIC research network for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Computational Study of a Versatile Lipase for the Degradation of Polylactic Acid

  • Murguiondo, Carlos
  • García de Lacoba, Mario
  • Acosta-Borreros, Valentina
  • Barriuso, Jorge
  • Prieto Orzanco, Alicia
Biocatalysis is an emerging and sustainable approach to depolymerize highly hydrophobic plastic polyesters such as poly(lactic acid) (PLA), a bioplastic widely used in packaging and disposable items. Some enzymes, including lipases, cutinases, and proteases, have been described to hydrolyze PLA, but the activity strongly depends on stereochemistry and crystallinity. In this study, we explored the activity of the versatile lipase fromOphiostoma piceae (OPE) and three engineered variants (N81A, N94A, and N81/94A) on polylactic acid (PLA), comparing the experimental data with predictions from two computational methodologies, Thermal Titration Molecular Dynamics (a classical method) and the machine learning-guided XLPFE scoring function. Experimentally, mutant N81A showed the highest PLA hydrolytic activity, followed by WT OPE, with N94A and N81/94A being substantially less effective. This combined approach served to validate the reliability of these computational strategies for predicting enzyme interactions and highlights the importance of using long enough model substrates to guide future enzyme optimization., C. Murguiondo Delgado thanks the Spanish Government for his FPU20/03916 fellowship. This work was supported by the spanish projects MICODE (PID2020-114210RB-I00-MCIN/AEI) and DEMO (MCIN/AEI/“NextGenerationEU”/PRTR, TED2021-130096B-I00). The authors would also like to thank the IBISBA1.0 project (H2020 730976), the SusPlast-CSIC Interdisciplinary Platform, and the LifeHub-CSIC research network for their support. The authors acknowledge the support toward the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification of the esterases responsible for dibutyl phthalate degradation in Paenarthrobacter sp. Shss

  • García-Miró, Alejandro
  • Sanz, David
  • Molpeceres, Francisco J.
  • Prieto, Alicia
  • Díaz, Eduardo
  • Barriuso, Jorge
Phthalic acid esters (PAEs) are plasticizers produced industrially in large quantities. Once released into the environment, these compounds can pose risks to environmental and human health. One of the most widely used PAEs is di- n -butyl phthalate (DBP), described as an endocrine disruptor, teratogenic and mutagenic agent. Given the need to eliminate DBP from the environment, biodegradation emerges as a particularly promising approach, and several microorganisms, mainly bacteria, have been reported as DBP-degraders. Understanding the specific mechanisms employed by these bacteria is crucial for optimizing the bioremediation process. In this work, we have focused on the Paenarthrobacter sp. strain Shss, an efficient DBP degrader. We have sequenced its genome and annotated the genes likely involved in the initial steps of DBP degradation. In vitro experiments showed that the esterase activity responsible for the first biodegradation step, namely DBP de-esterification to o -phthalate, was associated with the bacterial membrane. Genomic, phylogenetic and proteomic analyses suggested that two esterases, NicF3 and NicF4, are the main candidates responsible for this activity and that subsequent steps of o -phthalate catabolism are encoded within the nicF3 cluster. Furthermore, in silico structural modelling and molecular docking studies are consistent with NicF3 and NicF4 as two new members of the isochorismate-like esterase family, This work was supported by the Spanish projects MICODE (PID2020-114210RB-I00 MCIN/AEI/10.13039/501100011033), METACIRCUS (PID2022-142540OB-I00) MICIU/AEI/10.13039/501100011033) and DEMO (MCIN/AEI/“NextGenerationEU”/PRTR, TED2021-130096B-I00). We thank Matthias Boll for providing us the Paenarthrobacter sp. strain Shss. The authors would also like to thank IBISBA1.0 project (H2020 730976), the SusPlast-CSIC Interdisciplinary Platform, and the LifeHub-CSIC research network for their support, Peer reviewed, Modelo experimental alternativo-NAM, Organismos alternativos no vertebrados - Microorganismos Unicelulares - Bacterias
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioprocess performance analysis of novel methanol-independent promoters for recombinant protein production with Pichia pastoris

  • Garrigos, Javier|||0000-0003-2271-2220
  • Vuoristo, Kiira
  • Nieto-Taype, Miguel Angel|||0000-0003-1055-0658
  • Tähtiharju, Juha
  • Uusitalo, Jaana
  • Tukiainen, Pauliina
  • Schmid, Christian
  • Tolstorukov, Ilya
  • Madden, Knut
  • Penttilä, Merja
  • Montesinos Seguí, José Luis|||0000-0001-9941-0832
  • Valero, Francisco|||0000-0003-0429-9620
  • Glieder, Anton|||0000-0002-5986-9689
  • Garcia-Ortega, Xavier|||0000-0001-7833-3655
Pichia pastoris is a powerful and broadly used host for recombinant protein production (RPP), where past bioprocess performance has often been directed with the methanol regulated AOX1 promoter (P), and the constitutive GAP promoter (P). Since promoters play a crucial role in an expression system and the bioprocess efficiency, innovative alternatives are constantly developed and implemented. Here, a thorough comparative kinetic characterization of two expression systems based on the commercial PDF and UPP promoters (P, P) was first conducted in chemostat cultures. Most promising conditions were subsequently tested in fed-batch cultivations. These new alternatives were compared with the classical strong promoter P, using the Candida antarctica lipase B (CalB) as model protein for expression system performance. Both the P and P-based expression systems outperformed similar P-based expression in chemostat cultivations, reaching ninefold higher specific production rates (q ). CALB transcription levels were drastically higher when employing the novel expression systems. This higher expression was also correlated with a marked upregulation of unfolded protein response (UPR) related genes, likely from an increased protein burden in the endoplasmic reticulum (ER). Based on the chemostat results obtained, best culture strategies for both P and P expression systems were also successfully implemented in 15 L fed-batch cultivations where q and product to biomass yield (Y *) values were similar than those obtained in chemostat cultivations. As an outcome of the macrokinetic characterization presented, the novel P and P were observed to offer much higher efficiency for CalB production than the widely used P-based methanol-free alternative. Thus, both systems arise as highly productive alternatives for P. pastoris -based RPP bioprocesses. Furthermore, the different expression regulation patterns observed indicate the level of gene expression can be adjusted, or tuned, which is interesting when using Pichia pastoris as a cell factory for different products of interest. The online version contains supplementary material available at 10.1186/s12934-021-01564-9.