Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

4D printed actuators with soft‐robotic functions

  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk, J.
  • Sánchez-Somolinos, Carlos
Soft matter elements undergoing programed, reversible shape change can contribute to fundamental advance in areas such as optics, medicine, microfluidics, and robotics. Crosslinked liquid crystalline polymers have demonstrated huge potential to implement soft responsive elements; however, the complexity and size of the actuators are limited by the current dominant thin-film geometry processing toolbox. Using 3D printing, stimuli-responsive liquid crystalline elastomeric structures are created here. The printing process prescribes a reversible shape-morphing behavior, offering a new paradigm for active polymer system preparation. The additive character of this technology also leads to unprecedented geometries, complex functions, and sizes beyond those of typical thin-films. The fundamental concepts and devices presented therefore overcome the current limitations of actuation energy available from thin-films, thereby narrowing the gap between materials and practical applications., C.S.-S. thanks the Spanish MINECO project SAF2014-54763-C2-2-R, the Gobierno de Aragón, and the FEDER (EU). D.J.B. thanks the European Research Commission (ERC) Advanced Grant 669991 (VIBRATE). D.L. thanks the Netherlands Organization of Scientific Research (NWO) VENI grant 15135., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

ACSApplMaterInterfaces2020_12_44195_Ceamanos_Fig6

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk, J.
  • Sánchez-Somolinos, Carlos
Dataset corresponding to the underlying data of PRIME scientific publications. - Publication title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions. - Publication reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure 6 caption: Photoresponse of a dog bone-shaped LCE strip (110 μm thick) with uniaxial orientation. Director along the long axis of the element. A pre-stretching of the sample by a force of 2.4 mN has been applied prior to force measurements. Temporal dependence of force measurement under pulsed excitation (1 s, illumination starts at t = 0 s) with UV light (365 nm, purple line) at (a) 50, (c) 100, and (e) 200 mW/cm2. Temporal dependence of the sample surface temperature under pulsed excitation (1 s, illumination starts at t = 0 s) with UV light (365 nm, purple line) at (b) 50, (d) 100, and (f) 200 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices, PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

ACSApplMaterInterfaces2020_12_44195_Ceamanos_Fig4

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk, J.
  • Sánchez-Somolinos, Carlos
Dataset corresponding to the underlying data of PRIME scientific publications - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 Figure 4 caption: Photoresponse of a rectangular LCE strip (90 μm thick) with uniaxial orientation of the director along the long axis of the element with (a−c) low UV intensity (365 nm, 50 mW/cm2) and (d−f) high UV intensity (365 nm, 200 mW/cm2) exposure. A weight of 1 g is attached to the lower extreme of the strip. (a,d) Images of the LCE element successively acquired (i) before UV illumination, (ii) after UV illumination (after 4 and 1 min of illumination with 50 and 200 mW/cm2, respectively), (iii) 2 min after ceasing the UV illumination, and (iv) after 30 min of blue light illumination (455 nm, 4 mW/cm2). (b,e) Temporal dependence of normalized strip length during the initial part of the experiment showing contraction upon UV illumination (purple squares) with (b) 50 and (e) 200 mW/cm2 and the partial recovery of the length when UV illumination ceases (black squares). (b and d insets) Temporal dependence of normalized strip length during the whole experiment including the final blue light irradiation step (455 nm, 4 mW/cm2, for 30 min, blue squares). (c,f) Temporal dependence of temperature of the irradiated side of the LCE element illuminated (365 nm, purple line) with (c) 50 and (f) 200 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices, PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

ACSApplMaterInterfaces2020_12_44195_Ceamanos_Fig2

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk, J.
  • Sánchez-Somolinos, Carlos
Dataset corresponding to the underlying data of PRIME scientific publications. - Publication Title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication Reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure 2 caption: Thermomechanical response of a uniaxially oriented strip (90 μm thick) with the director along its long axis. (a) Weight of 1 g attached to the extreme of the strip lifted upon heating. (i−iii) Camera images acquired on heating from (i) 30 °C to (ii) 100 °C and (iii) at 30 °C again after cooling down. (b) Temperature dependence of normalized length and width of the LCE strip during the heating process. The strip length and width were measured at 30 °C(L0 andW0, respectively) and during the temperature increase of the cycle (L and W, respectively). PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices., PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

ACSApplMaterInterfaces2020_12_44195_Ceamanos_FigS2

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk, J.
  • Sánchez-Somolinos, Carlos
Dataset corresponding to the underlying data of PRIME scientific publications - Publication title: Four-Dimensional Printed Liquid Crystalline Elastomer Actuators with Fast Photoinduced Mechanical Response toward Light-Driven Robotic Functions - Publication reference: ACS Appl. Mater. Interfaces 2020, 12, 39, 44195. - Publication DOI: 10.1021/acsami.0c13341 - Figure S2 caption: Photoresponse of a dog-bone shaped LCE strip with uniaxial orientation. Peak force measurement at maximum under a sequence of ten pulses (pulse duration of 1 s with a periodicity of 11s) of UV light (365 nm) at 50 mW/cm2. PRIME. Advanced and versatile PRInting platform for the next generation of active Microfluidic dEvices., PRIME has received Funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 829010 and VIBRATE - Self-sustaining vibration and mechanical resonance effects in stimuli responsive liquid crystal polymer coatings and membranes (Vibrate) (669991)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fast photo-induced mechanical response for light-driven robotic functions with 4D printed liquid cristal elastomers

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Resumen del trabajo presentado al nanoGe Fall Meeting, celebrado online del 18 al 22 de octubre de 2021., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragon project LMP150_18, and FEDER (EU). D.J.B. thanks the European Research Commission (ERC) Advanced Grant 66999 (VIBRATE). D.L. thanks the Netherlands Organization of Scientific Research (NWO) VENI grant 15135., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Four-dimensional printed liquid crystalline elastomer actuators with fast photoinduced mechanical response toward light-driven robotic functions

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Remote light exposure of photoresponsive liquid crystalline polymers has drawn great attention over the last years as an attractive strategy to generate mechanical work with high spatial resolution. To tailor these materials into practical engineering devices, it is of key importance to gain control over their morphology and thus precisely program their mechanical response, which must also be fast and relevant in magnitude. In this communication, we report the four-dimensional (4D) printing of azobenzene-containing liquid crystalline elastomers (LCEs) that respond to light. During extrusion of the LCE precursor, mesogen orientation is defined by the needle’s moving direction enabling a precise definition of the director, which is later fixed by photopolymerization. Fast mechanical responses have been observed in these 4D printed LCE elements when excited with ultraviolet (UV) light. These 4D printed elements lift objects many times heavier than their own weight, demonstrating a capacity to produce effective work. Photochemical and photothermal contributions to the deformation and force have been identified. Advantageously, the use of blue and UV light excitation enables adjustment of generated forces that can be maintained even in the dark and can be released by light excitation or temperature. The demonstrated ability to generate light-responsive elements quickly delivering sufficient work paves the way for implementing remotely addressed mechanical functions to future soft robotics and engineering., The described research study is part of the project PRIME. This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragón project LMP150_18, and FEDER (EU). D.J.B. thanks the European Research Commission (ERC) Advanced Grant 66999 (VIBRATE). D.L. thanks the Netherlands Organization of Scientific Research (NWO) VENI grant 15135., Peer reviewed