Skip to main content

BIOCATALISIS TERMO-ACTIVADA POR NANO-ACTUACION

BIO2017-84246-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 68
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Digital luminescence patterning via inkjet printing of a photoacid catalysed organic-inorganic hybrid formulation

  • Alamán, Jorge
  • López-Valdeolivas, María
  • Alicante, Raquel
  • Peña, J. I.
  • Sánchez-Somolinos, Carlos
Accurate positioning of luminescent materials at the microscale is essential for the further development of diverse application fields including optoelectronics, energy, biotechnology and anti-counterfeiting. In this respect, inkjet printing has recently attracted great interest due to its ability to precisely deposit with high throughput and no contact, functional materials on different types of substrates. Here, we present a novel photoacid catalysed organic-inorganic hybrid luminescent ink. The formulation, containing monomers bearing epoxy and silane functionalities, a photoacid generator and a small percentage of Rhodamine-B, shows good jetting properties and adequate wetting of the deposited droplets on the receiving substrates. Ultraviolet exposure of the deposited material triggers the cationic ring-opening polymerization reaction of the epoxy groups. Concomitantly, if atmospheric water is available, hydrolysis and condensation takes place, overall leading to a luminescent crosslinked hybrid organic-inorganic polymeric material obtained through a simple one-step curing process, without post baking steps. Advantageously, protection of the ink from actinic light delays the hydrolysis and condensation conferring long-term stability to the ink. Digital patterning leads to patterned emissive surfaces and elements with good adhesion to different substrates, mechanical and optical properties for the fabrication of optical and photonic elements and devices., This research was funded by the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragón and FEDER (EU)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dual role of magnetic nanoparticles as intracellular hotspots and extracellular matrix disruptors triggered by magnetic hyperthermia in 3D cell culture models

  • Beola, Lilianne
  • Asín, Laura
  • Fratila, Raluca M.
  • Herrero, Vanessa
  • Fuente, Jesús M. de la
  • Grazú, Valeria
  • Gutiérrez, Lucía
Magnetic hyperthermia is a promising therapy for the localized treatment of cancer based on the exposure of magnetic nanoparticles to an external alternating magnetic field. In order to evaluate some of the mechanisms involved in the cellular damage caused by this treatment, two different 3D cell culture models were prepared using collagen, which is the most abundant protein of the extracellular matrix. The same amount of nanoparticles was added to cells either before or after their incorporation into the 3D structure. Therefore, in one model, particles were located only inside cells (In model), while the other one had particles both inside and outside cells (In&Out model). In the In&Out model, the hyperthermia treatment facilitated the migration of the particles from the outer areas of the 3D structure to the inner parts, achieving a faster homogeneous distribution throughout the whole structure and allowing the particles to gain access to the inner cells. The cell death mechanism activated by the magnetic hyperthermia treatment was different in both models. Necrosis was observed in the In model and apoptosis in the In&Out model 24 h after the hyperthermia application. This was clearly correlated with the amount of nanoparticles located inside the cells. Thus, the combination of both 3D models allowed us to demonstrate two different roles of the magnetic particles during the hyperthermia treatment: (i) The modulation of the cell death mechanism depending on the amount of intracellular particles and (ii) the disruption of the collagen matrix caused by the extracellular nanoparticles., The present work was supported by grants from the Universidad de Zaragoza (UZ2018-CIE-03), Spanish MINECO (MAT2011-26851-CO2-01, SAF2014-54763-C2-2-R, and BIO2017-84246-C2-1-R), Fondo Social de la DGA (grupos DGA), COST Action TD1402 (Radiomag), and the European Commission through the M-ERA.NET COFUND project MagicCellGene (PCIN-2017-060). L.B. thanks Santander-Universidad Zaragoza Fellowship program for her PhD position. L.A. acknowledges financial support from the Juan de la Cierva program (JFC1-2014-20655). L.G. and R.M.F. acknowledge financial support from the Ramón y Cajal program (RYC-2014-15512 and RYC-2015-17640)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enzyme activation by alternating magnetic field: Importance of the bioconjugation methodology

  • Armenia, Ilaria
  • Grazú, Valeria
  • De Matteis, Laura
  • Ivanchenko, Pavlo
  • Martra, Gianmario
  • Gornati, Rosalba
  • Fuente, Jesús M. de la
  • Bernardini, Giovanni
Iron oxide nanoparticles (NPs) are attractive materials for enzyme immobilization and, thanks to their superparamagnetism, can be accessed by remote stimuli. This can be exploited to activate molecules that are not remotely actuable. Here, we demonstrate that thermophilic enzymes chemically linked to NPs can be activated in a “wireless” fashion by an external alternate magnetic field (AMF). To this aim, we have conjugated, with different binding strategies, the thermophilic enzymes α-amylase and l-aspartate oxidase to iron oxide NPs obtaining NP-enzyme systems with activities depending on the different orientations and stretching of the enzymes. Since enzyme activation occurs without a significant rise of the “overall” temperature of the systems, we have speculated a local NP-enzyme heating that does not immediately interest the rest of the solution that remains at relatively low temperature, low enough to allow non-thermophilic enzymes to work together with the NP-conjugated thermophilic enzymes. Nanoactuation of thermophilic enzymes by AMF has potential applications in different fields. Indeed, multi-enzymatic processes with enzymes with different temperature optima could be carried out in the same reaction pot and thermolabile products could be efficiently produced by thermophilic enzymes without suffering for the high temperatures. Moreover, our findings represent a proof of concept of the possibility to achieve a fine-tuning of the enzyme-NP system with the aim to intervene in cell metabolism., Ilaria Armenia is a PhD student of the “Biotechnology, Biosciences and Surgical Technology” course at Università degli Studi dell'Insubria. The Authors are in debt with Prof. Loredano Pollegioni for the gift of the enzymes LASPO and DAAO. Authors would like to also acknowledge the public funding from Fondo Social de la DGA, Spain (grupos DGA), and from Ministerio de la Economía y Competitividad del Gobierno de España for the public funding of Proyectos I D+i – Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Spain (project n. BIO2017-84246-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Light to shape the future: From photolithography to 4D printing

  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
Over the last few decades, the demand of polymeric structures with well‐defined features of different size, dimension, and functionality has increased from various application areas, including microelectronics, biotechnology, tissue engineering, and photonics, among others. The ability of light to control over space and time physicochemical processes is a unique tool for the structuring of polymeric materials, opening new avenues for technological progress in different fields of application. This article gives an overview of various photochemical reactions in polymers, photosensitive materials, and structuring techniques making use of light, and highlights most recent advances, emerging opportunities, and relevant applications., J.d.B. acknowledges the MINECO, the FSE, and the FEDER for funding through projects RYC‐2015‐18471 (Ramón y Cajal program) and CTQ2017‐84087. C.S.‐S. thanks the Spanish MICINN projects BIO2017‐84246‐C2‐1‐R, Gobierno de Aragón, and FEDER (EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical planar waveguide sensor with integrated digitally-printed light coupling-in and readout elements

  • Alamán, Jorge
  • López-Valdeolivas, María
  • Alicante, Raquel
  • Sánchez-Somolinos, Carlos
This article belongs to the Section Physical Sensors., Optical planar waveguide sensors, able to detect and process information from the environment in a fast, cost-effective, and remote fashion, are of great interest currently in different application areas including security, metrology, automotive, aerospace, consumer electronics, energy, environment, or health. Integration of networks of these systems together with other optical elements, such as light sources, readout, or detection systems, in a planar waveguide geometry is greatly demanded towards more compact, portable, and versatile sensing platforms. Herein, we report an optical temperature sensor with a planar waveguide architecture integrating inkjet-printed luminescent light coupling-in and readout elements with matched emission and excitation. The first luminescent element, when illuminated with light in its absorption band, emits light that is partially coupled into the propagation modes of the planar waveguide. Remote excitation of this element can be performed without the need for special alignment of the light source. A thermoresponsive liquid crystal-based film regulates the amount of light coupled out from the planar waveguide at the sensing location. The second luminescent element partly absorbs the waveguided light that reaches its location and emits at longer wavelengths, serving as a temperature readout element through luminescence intensity measurements. Overall, the ability of inkjet technology to digitally print luminescent elements demonstrates great potential for the integration and miniaturization of light coupling-in and readout elements in optical planar waveguide sensing platforms., This research was funded by the Spanish Ministerio de Ciencia, Innovación y Universidades for Project BIO2017-84246-C2-1-R, Gobierno de Aragón, FEDER (EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Facile fabrication of microlenses with controlled geometrical characteristics by inkjet printing on nanostructured surfaces prepared by combustion chemical vapour deposition

  • Alamán, Jorge
  • López-Villuendas, Ana María
  • López-Valdeolivas, María
  • Arroyo, M. Pilar
  • Andrés, Nieves
  • Sánchez-Somolinos, Carlos
Precise positioning of microlenses with well-defined optical characteristics is key in the further development of CCD cameras, biosensors or optical fiber interconnects. Inkjet printing enables accurate microfabrication of microlenses however inks generally employed for this purpose contain solvents that need to be evaporated before the lens solidification process. Besides, the receiving substrate needs to be conditioned, sometimes using complex photolithographic steps to lead to large contact angles of the deposited ink drop that are needed to attain large numerical aperture microlenses. This paper describes the fabrication of microlenses with controlled geometrical characteristics by inkjet printing a solvent-free photocurable formulation. The employed photoacid catalyzed organic–inorganic hybrid ink can be cured just after deposition, without any intermediate evaporation or annealing step, enormously simplifying microlens fabrication process. Besides, a simple combustion chemical vapour deposition process, leading to a porous layer with nano-roughness, followed by a silanization step using a fluorosilane enables the generation of a surface that provides access to a large range of contact angles for the ink drops that are printed on this surface. Single droplet microball lenses with contact angles up to 115°, beyond the hemispherical microlenses, are demonstrated with this industrially viable, cost-effective and high-throughput method., Carlos Sánchez Somolinos acknowledges funding from the Spanish Ministry project BIO2017-84246-C2-1-R, Gobierno de Aragón project LMP150_18 and FEDER (EU). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Inkjet‐based technology for microencapsulation of gold nanoparticles within biocompatible hydrogels

  • Artiga, Álvaro
  • Ramos-Sánchez, Francisco
  • Serrano-Sevilla, Inés
  • De Matteis, Laura
  • Mitchell, Scott G.
  • Sánchez-Somolinos, Carlos
  • Fuente, Jesús M. de la
Herein, an inkjet‐based technology as a versatile high throughput methodology for the microencapsulation of gold nanoparticles (AuNPs) inside a biocompatible chitosan hydrogel is described. This continuous automated inkjet production approach generates 30 µm diameter polymeric microcapsules and offers a high rate of production and nanoparticle encapsulation efficiency of 14 nm diameter AuNPs, precise control of the microcapsule size, and ease of scale‐up. The hybrid microcapsules demonstrate biocompatible cell‐adhesion properties and resist degradation over a large range of pH, making them particularly relevant for a variety of potential health applications., Authors thank Spanish MICINN Project No. BIO2017‐84246‐C2‐1‐R and DGA and Fondos Feder (Bionanosurf E15_17R). A.A. acknowledges the Ministerio de Educación, Cultura y Deportes of Spanish Government for an FPU Grant No. (FPU014/06249). I.S.S. acknowledges Ministerio de Economía y Competitividad del Gobierno de España for her FPI Grant No. (BES‐2015‐071304)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surfactant-free synthesis and scalable purification of triangular gold nanoprisms with low non-specific cellular uptake

  • Ramírez-Jiménez, Rafael
  • Artiga, Álvaro
  • Mitchell, Scott G.
  • Martín-Rapún, Rafael
  • Fuente, Jesús M. de la
This article belongs to the Section Synthesis, Interfaces and Nanostructures., Gold nanoprisms possess remarkable optical properties that make them useful for medical biotechnology applications such as diagnosis and photothermal therapy. However, shape-selective synthesis of gold nanoprisms is not trivial and typically requires either toxic surfactants or time-consuming purification protocols, which can limit their applicability. Here, we show how triangular gold nanoprisms of different sizes can be purified by precipitation using the non-toxic glutathione ligand, thereby removing the need for toxic surfactants and bottleneck purification techniques. The protocol is amenable for direct scaling up as no instrumentation is required in the critical purification step. The new purification method provides a two-fold increased yield in gold nanoprisms compared to electrophoretic filtration, while providing nanoprisms of similar localized surface plasmon resonance wavelength. Crucially, the gold nanoprisms isolated using this methodology show fewer non-specific interactions with cells and lower cellular internalization, which paves the way for a higher selectivity in therapeutic applications., This research was funded by the Spanish Ministry of Science, Innovation and Universities (Ramón y Cajal fellowship RYC-2013-12570 to R.M.-R., FPU014/06249 fellowship to A.A., and APCIN action in the framework of the European EuroNanoMedII Project “NanoPlasmiRNA”), Spanish MINECO project BIO2017-84246-C2-1-R, and Gobierno de Aragón (Diputación General de Aragón–Fondo Social Europeo and Predoctoral contract to R.R.J.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coumarin-containing pillar[5]arenes as multifunctional liquid crystal macrocycles

  • Concellón, Alberto
  • Romero, Pilar
  • Marcos, Mercedes
  • Barberá, Joaquín
  • Sánchez-Somolinos, Carlos
  • Mizobata, Masayuki
  • Tomoki, Ogoshi
  • Serrano, José Luis
  • Barrio, Jesús del
Liquid crystal macrocycles (LCMs) combine the unique properties of liquid crystals with those associated with macrocyclic compounds—shape persistence and the capability of hosting small molecules. Herein, we investigate the grafting of coumarin-containing promesogenic moieties to pillar[5]arene as a strategy to obtain multifunctional LCMs. Pillar[5]arenes containing 10 and 30 coumarin units are glassy materials with nematic mesomorphism. Moreover, the coumarin moieties afford the pillar[5]arene derivatives with enhanced film-forming and photoresponsive properties. Photodimerization of the coumarin moieties results in cross-linked polymer networks, which can be used as alignment layers. Therefore, liquid-crystal coumarin-containing pillar[5]arenes represent a significant addition to the family of LCMs and may become useful for the development of engineered, hierarchical structures and materials., J.D.B. acknowledges MINECO, FSE, and FEDER for funding through projects RYC-2015-18471 (Ramón y Cajal program) and CTQ2017-84087-R. T.O. acknowledges funding from JST CREST. C.S.-S. acknowledges MINECO for funding through project BIO2017-84246-C2-1-R, Gobierno de Aragón for project LMP150_18, and FEDER (EU). J.L.S acknowledges MINECO for funding through project PGC2018-097583-B-I00, FEDER, and Gobierno de Aragón (Research Group E47_17R). The authors thank access to the services of CEQMA (nuclear magnetic resonance, mass spectra, and thermal analysis) of the Universidad de Zaragoza-CSIC. A.C. thanks MINECO for a PhD fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fighting against intracellular pathogens: host cell-targeted drug delivery

  • Baranyai, Zsuzsa
Nanomedicine with active targeting strategies is one of the most promising approaches toensure that drug molecules reach their target sites and it brings us closer to eradicating harmful intracellular pathogens., This work has been supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 842652, by the Spanish MICINN project BIO2017-84246-C2-1-R and by Gobierno de Aragon (Diputacion General de Aragon-Fondo Social Europeo)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Glycogen synthase kinase 3β inhibitor delivered by chitosan nanocapsules promotes safe, fast, and efficient activation of Wnt signaling in vivo

  • Ambrosone, Alfredo
  • De Matteis, Laura
  • Serrano-Sevilla, Inés
  • Tortiglione, Claudia
  • Fuente, Jesús M. de la
The Wnt-β-catenin signaling is an evolutionarily conserved pathway with a prominent role in different biological processes such as stem cell renewal, cell proliferation, and differentiation. Wnt signaling dysfunctions have been associated with developmental and neurological diseases as well as formation and progression of tumors. Nanomedicine may provide safe and efficient drug delivery systems offering breakthrough innovation in targeting Wnt signaling. The natural polymer chitosan represents an excellent candidate for delivery platforms, showing interesting biophysical properties such as high biocompatibility and mucoadhesive properties. In this study, oily core chitosan nanocapsules were designed with the aim to deliver the Wnt signaling agonist alsterpaullone in the model organism Hydra vulgaris. Chitosan nanocapsules show negligible impact on animal morphology, without affecting the viability. Nile red-loaded nanocapsules reveal fast and efficient intracellular delivery of the fluorescent cargo. Short incubations with alsterpaullone-loaded nanocapsules ensure a more effective activation of Wnt signaling with respect to the same concentrations of the free drug. Altogether, these data provide evidence that chitosan nanocapsules may represent a very promising strategy for future therapies targeting the diseases associated with canonical Wnt signaling., The authors acknowledge financial support from Spanish MINECO (project BIO2017-84246-C2-1-R) and DGA and Fondos Feder (Bionanosurf E15_17R). A.A. thanks European Union for financial support with a Marie Curie Fellowship (H2020-MSCA-IF-2014-657566). I.S.S. acknowledges Ministerio de Economı́a y Competitividad del Gobierno de España for her FPI grant (BES-2015-071304)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoparticle-based biosensors for detection of extracellular vesicles in liquid biopsies

  • Martín-Gracia, Beatriz
  • Martín-Barreiro, Alba
  • Cuestas-Ayllón, Carlos
  • Grazú, Valeria
  • Linē, Aija
  • Llorente, Alicia
  • Fuente, Jesús M. de la
  • Moros, María
Tumor-derived extracellular vesicles have emerged as an alternative source of cancer biomarkers in liquid biopsies. Despite their clinical potential, traditional methods for isolation and analysis have hampered their translation into the clinic. The use of nanomaterial-based biosensors can speed up the development of analytical methods for quantifying extracellular vesicles in a specific, highly reproducible, robust, fast and inexpensive way. Here we review the utility of extracellular vesicles as a novel type of liquid biopsies and the recent advances in nanoparticle-based biosensors for their analysis. We aim to emphasise the limitations and challenges that hinder extracellular vesicle analysis using these biosensors and point out potential solutions., This work was supported by the TRANSCAN2-JTC2016 call (Project PROSCANEXO), Spanish AEI funds (BIO2017-84246-C2-1-R project and Juan de la Cierva fellowship (IJCI-2016-30520) to M. M.) and Fondo Social de la DGA (grupos DGA). B. M. G. thanks the DGA Fellowship program for her PhD position. The Research Council of Norway, the Norwegian Cancer Society, and the South-Eastern Norway Regional Health Authority are also acknowledged., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Cocinando gelatina para células: geles 3D para mimetizar la matriz extracelular

  • Pamplona, Regina
Trabajo presentado al III Workshop de NanoOncología, celebrado en la Universidad de Zaragoza del 14 al 15 de enero de 2020., Contrato Predoctoral de Personal Investigador en Formación 2017-2021, Gobierno de Aragón. Spanish MICINN projects (CTQ2015-66869-P and BIO2017-84246-C2-1-R). Fondo Social Europeo (Grupo E93)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dysprosium and holmium vanadate nanoprobes as high-performance contrast agents for high-field magnetic resonance and computed tomography imaging

  • Gómez-González, Elisabet
  • Núñez, Nuria O.
  • Caro, Carlos
  • García-Martín, María L.
  • Fernández-Afonso, Yilian
  • Fuente, Jesús M. de la
  • Balcerzyk, Marcin
  • Ocaña, Manuel
A wet chemical method for the synthesis of uniform and well-dispersed dysprosium vanadate (DyVO4) and holmium vanadate (HoVO4) nanoparticles with almost spherical shape and a mean size of ⁓ 60 nm and their functionalization with polyacrylic acid is described. The transverse magnetic relaxivity of both systems at 9.4 T is analyzed on the basis of magnetic susceptibility and magnetization measurements in order to evaluate their potential for applications as high field MRI contrast agent. In addition, the X-ray attenuation properties of these systems are also studied to determine their capability as computed tomography contrast agent. Finally, the colloidal stability under physiological pH conditions and the cytotoxicity of the functionalized NPs is also addressed to assess their suitability for bioimaging applications, Funding from FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (RTI2018-094426–B-I00 and BIO2017-84246-C2-1-R) and from Gobierno de Aragón (Diputación General de Aragón–Fondo Social Europeo) is acknowledged. Y.F-A. thanks Santander-Universidad Zaragoza fellowship program for her Ph.D. position.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanotechnology-based targeted drug delivery: An emerging tool to overcome tuberculosis

  • Baranyai, Zsuzsa
  • Soria-Carrera, Héctor
  • Alleva, María
  • Millán-Placer, Ana C.
  • Lucía, Ainhoa
  • Martín-Rapún, Rafael
  • Aínsa, José A.
  • Fuente, Jesús M. de la
The appearance and rapid spread of drug resistant strains of tuberculosis (TB), one of the deadliest infectious diseases, pose a serious threat to public health and increase the need for shorter, less toxic, and more effective therapies. Developing new drugs is difficult and often associated with side effects, so nanotechnology has emerged as a tool to improve current treatments and to rescue drugs having elevated toxicity or poor solubility. Due to their size and surface chemistry, antimicrobial-loaded nanocarriers are avidly taken up by macrophages, the main cells hosting Mycobacterium tuberculosis. Macrophages are continuously recruited to infected areas, they can transport drugs with them, making passive targeting a good strategy for TB treatment. Active targeting (decorating surface of nanocarriers with ligands specific to receptors displayed by macrophages) further increases local drug concentration, and thus treatment efficacy. Although in in vivo studies, nanocarriers are often administered intravenously in order to avoid inaccurate dosage in animals, translation to humans requires more convenient routes like pulmonary or oral administration. This report highlights the importance and progress of pulmonary administration, passive and active targeting strategies toward bacteria reservoirs to overcome the challenges in TB treatment., This work was supported by the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 842652, the Spanish MICINN projects (Grant Nos. BIO2017-84246-C2-1-R, SAF2017-84839-C2-1-R, and CTQ2015-66869-P), and by the Gobierno de Aragón (Diputación General de Aragón–Fondo Social Europeo). R.M.-R. acknowledges MICINN for funding through the Ramón y Cajal Program (Grant No. RYC-2013-12570). H.S.-C. and A.C.M.-P. are grateful for FPU predoctoral contracts from Ministerio de Educación Cultura y Deporte (Spain) and M.A. is grateful for a predoctoral contract from Gobierno de Aragón (Diputación General de Aragón–Fondo Social Europeo)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Efficient T2 Cobalt Ferrite Nanoparticles Vectorized for Internalization in Cancer Cells

  • Mazarío, Eva
  • Cañete, Magdalena
  • Herranz, Fernando
  • Sánchez-Marcos, Jorge
  • Fuente, Jesús M. de la
  • Herrasti, Pilar
  • Menéndez, Nieves
Uniform cobalt ferrite nanoparticles have been synthesized using an electrochemical synthesis method in aqueous media. Their colloidal, magnetic, and relaxometric properties have been analyzed. The novelty of this synthesis relies on the use of iron and cobalt foils as precursors, which assures the reproducibility of the iron and cobalt ratio in the structure. A stable and biocompatible targeting conjugate nanoparticle-folic acid (NP-FA) was developed that was capable of targeting FA receptor positivity in HeLa (human cervical cancer) cancer cells. The biocompatibility of NP-FA was assessed in vitro in HeLa cells using the MTT assay, and morphological analysis of the cytoskeleton was performed. A high level of NP-FA binding to HeLa cells was confirmed through qualitative in vitro targeting studies. A value of 479 Fe+Co mM􀀀1s􀀀1 of transverse relaxivity (r2) was obtained in colloidal suspension. In addition, in vitro analysis in HeLa cells also showed an important effect in negative T2 contrast. Therefore, the results show that NP-FA can be a potential biomaterial for use in bio medical trials, especially as a contrast agent in magnetic resonance imaging (MRI)., We are grateful for the financial support provided by the Spanish Ministry of Economy and Competitiveness who funded this research under project PGC2018-095642-B-I00 and to the Fondo Social Europeo-Gobierno de Aragón, Ministerio de la Economía y Competitividad del Gobierno de España for the public funding of Proyectos I+D+I—Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (project n. BIO2017-84246-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoparticles and bioorthogonal chemistry joining forces for improved biomedical applications

  • Idiago López, Francisco Javier
  • Moreno Antolín, Eduardo
  • Fuente, Jesús M. de la
  • Fratila, Raluca M.
Bioorthogonal chemistry comprises chemical reactions that can take place inside complex biological environments, providing outstanding tools for the investigation and elucidation of biological processes. Its use in combination with nanotechnology can lead to further developments in diverse areas of biomedicine, such as molecular bioimaging, targeted delivery, in situ drug activation, study of cell–nanomaterial interactions, biosensing, etc. Here, we summarise the recent efforts to bring together the unique properties of nanoparticles and the remarkable features of bioorthogonal reactions to create a toolbox of new or improved biomedical applications. We show how, by joining forces, bioorthogonal chemistry and nanotechnology can overcome some of the key current limitations in the field of nanomedicine, providing better, faster and more sensitive nanoparticle-based bioimaging and biosensing techniques, as well as therapeutic nanoplatforms with superior efficacy., This work has been supported by the European Commission, MagicCellGene Project (M-ERA.NET COFUND call 2016, funded by Ministerio de Economía y Competitividad, MINECO, Spain in the framework of the PCIN-2017-060 project), Ministerio de Innovación, Ciencia y Universidades (MCIU, PGC2018-096016-B-I00 to R. M. F.), Ministerio de Economía, Industria y Competitividad (BIO 2017-84246-C2-1R to J. M. F.) and MINECO and FSE/Agencia Estatal de Investigación (Ramón y Cajal subprogram, grant RYC-2015-17640 to R.M.F.). R. M. F. also acknowledges financial support from European Union's Horizon 2020 research and innovation programme under the MarieSkłodowska-Curie grant agreement No. 657215. J. I. L. and E. M. A. acknowledge financial support for their predoctoral fellowships from Gobierno de Aragón (DGA 2017-2021 call, co-funded by the Programa Operativo Fondo Social Europeo de Aragón 2014-2020) and Ministerio de Universidades (FPU17/02024), respectively. Authors also acknowledge support from Gobierno de Aragón and Fondos Feder for funding the Bionanosurf (E15_17R) research group. For the table of content figure the authors would like to acknowledge help from Miguel Ruiz and the use of resources from Servier Medical Art (https://smart.servier.com) and Flaticon (https://www.flaticon.com). Part of Figure 14 was created with BioRender.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantification of lipoprotein uptake in vivo using magnetic particle imaging and spectroscopy

  • Hildebrand, Staffan
  • Löwa, Norbert
  • Paysen, Hendrik
  • Fratila, Raluca M.
  • Reverte-Salisa, Laia
  • Trakoolwilaiwan, Thithawat
  • Niu, Zheming
  • Kasparis, Georgios
  • Franziska Preuss, Stephanie
  • Kosch, Olaf
  • Fuente, Jesús M. de la
  • Thanh, Nguyen Thi Kim
  • Wiekhorst, Frank
  • Pfeifer, Alexander
Lipids are a major source of energy for most tissues, and lipid uptake and storage is therefore crucial for energy homeostasis. So far, quantification of lipid uptake in vivo has primarily relied on radioactive isotope labeling, exposing human subjects or experimental animals to ionizing radiation. Here, we describe the quantification of in vivo uptake of chylomicrons, the primary carriers of dietary lipids, in metabolically active tissues using magnetic particle imaging (MPI) and magnetic particle spectroscopy (MPS). We show that loading artificial chylomicrons (ACM) with iron oxide nanoparticles (IONPs) enables rapid and highly sensitive post hoc detection of lipid uptake in situ using MPS. Importantly, by utilizing highly magnetic Zn-doped iron oxide nanoparticles (ZnMNPs), we generated ACM with MPI tracer properties superseding the current gold-standard, Resovist, enabling quantification of lipid uptake from whole-animal scans. We focused on brown adipose tissue (BAT), which dissipates heat and can consume a large part of nutrient lipids, as a model for tightly regulated and inducible lipid uptake. High BAT activity in humans correlates with leanness and improved cardiometabolic health. However, the lack of nonradioactive imaging techniques is an important hurdle for the development of BAT-centered therapies for metabolic diseases such as obesity and type 2 diabetes. Comparison of MPI measurements with iron quantification by inductively coupled plasma mass spectrometry revealed that MPI rivals the performance of this highly sensitive technique. Our results represent radioactivity-free quantification of lipid uptake in metabolically active tissues such as BAT., S.H., L.R.-S., and A.P. thank the DFG (FOR917, 335447717/SFB1328, and 397484323/SFB TRR 259/1) and DAAD (57172123) for funding. Z.N. was supported by the Bonn International Graduate School of Drug Sciences (BIGS DrugS), University of Bonn, and A.P. is member of the PharmaCenter Bonn, University of Bonn, Germany. N.L., H.P., and F.W. would like to acknowledge the Federal Ministry of Economics and Technology within the TransMeT project “Magnetische Messtechnik für die Größenfraktionierung magnetischer Nanopartikel”, the DFG Grant SHA 1506/2-1 “AMPI: Magnetic particle imaging: Development and evaluation of novel methodology for the assessment of the aorta in vivo in a small animal model of aortic aneurysms”, the DFG grant TR 408/9-1 “quantMPI: Establishment of quantitative Magnetic Particle Imaging (MPI) application oriented phantoms for preclinical investigations”, and the DFG grant “Matrix in Vision” (SFB 1340/1 2018, no 372486779, project A02). N.T.K.T. thanks EPSRC (EP/M018016/1 and EP/M015157/1) and AOARD (FA2386-17-1-4042 award) for funding. G.K. would like to acknowledge EPSRC for his Ph.D. studentship. T.T. thanks the Royal Thai Government for his Ph.D. studentship. The microscopy work was conducted in the “Laboratorio de Microscopias Avanzadas” at “Instituto de Nanociencia de Aragón–Universidad de Zaragoza”. The authors acknowledge the LMA-INA for offering access to their instruments and expertise. R.M.F. acknowledges financial support from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 657215 and from Ministerio de Economía y Competitividad (Ramón y Cajal subprogram RYC-2015-17640). J.M.F. also acknowledges financial support from Spanish MINECO (project BIO2017-84246-C2-1-R) and DGA and Fondos Feder (Bionanosurf E15_17R). The authors would like to acknowledge the LA-ICPMS laboratory of the Institute of Geosciences and Meterology, University of Bonn, for performing ICP-MS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Critical parameters to improve pancreatic cancer treatment using magnetic hyperthermia: field conditions, immune response, and particle biodistribution

  • Beola, Lilianne
  • Grazú, Valeria
  • Fernández-Afonso, Yilian
  • Fratila, Raluca M.
  • Heras, Marcelo de las
  • Fuente, Jesús M. de la
  • Gutiérrez, Lucía
  • Asín, Laura
Magnetic hyperthermia (MH) was used to treat a murine model of pancreatic cancer. This type of cancer is generally characterized by the presence of dense stroma that acts as a barrier for chemotherapeutic treatments. Several alternating magnetic field (AMF) conditions were evaluated using three-dimensional (3D) cell culture models loaded with magnetic nanoparticles (MNPs) to determine which conditions were producing a strong effect on the cell viability. Once the optimal AMF conditions were selected, in vivo experiments were carried out using similar frequency and field amplitude parameters. A marker of the immune response activation, calreticulin (CALR), was evaluated in cells from a xenograft tumor model after the MH treatment. Moreover, the distribution of nanoparticles within the tumor tissue was assessed by histological analysis of tumor sections, observing that the exposure to the alternating magnetic field resulted in the migration of particles toward the inner parts of the tumor. Finally, a relationship between an inadequate body biodistribution of the particles after their intratumoral injection and a significant decrease in the effectiveness of the MH treatment was found. Animals in which most of the particles remained in the tumor area after injection showed higher reductions in the tumor volume growth in comparison with those animals in which part of the particles were found also in the liver and spleen. Therefore, our results point out several factors that should be considered to improve the treatment effectiveness of pancreatic cancer by magnetic hyperthermia., This work was funded by the European Commission through the MagicCellGene Project (M-ERA.NET COFUND call 2016, funded by Ministerio de Economía y Competitividad, MINECO, Spain, in the framework of the PCIN-2017-060 project to V.G.) and the TBMED project (DT-NMBP-02-2018, ID: 814439 to R.M.F.), Spanish MCIU (PGC2018-096016-B-I00 to R.M.F. and L.G., and project BIO2017-84246-C2-1-R to V.G. and J.M.F.), Fondo Social de la DGA (grupos DGA), Fundación Ibercaja-Universidad de Zaragoza (JIUZ-2018-CIE-03 to L.G.), and Universidad de Zaragoza (UZ-2018-CIE-03 to L.G.). L.B. and Y.F.-A. thank the Santander-Universidad Zaragoza Fellowship program for their Ph.D. position. L.G. and R.M.F. acknowledge financial support from the Ramón y Cajal program (RYC-2014-15512 and RYC-2015-17640)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fate and transformation of silver nanoparticles in different biological conditions

  • Pem, Barbara
  • Ćurlin, Marija
  • Domazet Jurašin, Darija
  • Vrček, Valerije
  • Barbir, Rinea
  • Micek, Vedran
  • Fratila, Raluca M.
  • Fuente, Jesús M. de la
  • Vinković Vrček, Ivana
The exploitation of silver nanoparticles (AgNPs) in biomedicine represents more than one third of their overall application. Despite their wide use and significant amount of scientific data on their effects on biological systems, detailed insight into their in vivo fate is still lacking. This study aimed to elucidate the biotransformation patterns of AgNPs following oral administration. Colloidal stability, biochemical transformation, dissolution, and degradation behaviour of different types of AgNPs were evaluated in systems modelled to represent biological environments relevant for oral administration, as well as in cell culture media and tissue compartments obtained from animal models. A multimethod approach was employed by implementing light scattering (dynamic and electrophoretic) techniques, spectroscopy (UV–vis, atomic absorption, nuclear magnetic resonance) and transmission electron microscopy. The obtained results demonstrated that AgNPs may transform very quickly during their journey through different biological conditions. They are able to degrade to an ionic form and again reconstruct to a nanoparticulate form, depending on the biological environment determined by specific body compartments. As suggested for other inorganic nanoparticles by other research groups, AgNPs fail to preserve their specific integrity in in vivo settings., This study was based upon a collaborative work from COST Action CA 17140 "Cancer Nanomedicine from the Bench to the Bedside" supported by COST (European Cooperation in Science and Technology). It was financially supported by the Croatian Science Foundation (grant number HRZZ-IP-2016-06-2436), the Ministerio de Ciencia e Innovacion and Fondo Social Europeo/Agencia Estatal de Investigación (Spain, grant BIO2017-84246-C2-1-R and Ramón y Cajal subprogram, grant RYC-2015-17640), Fondo Social de la DGA (grupos DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fe3O4-Au core-shell nanoparticles as a multimodal platform for in vivo imaging and focused photothermal therapy

  • Caro, Carlos
  • Gámez, Francisco
  • Quaresma, Pedro
  • Páez-Muñoz, Jose María
  • Domínguez, Alejandro
  • Pearson, John R.
  • Pernía Leal, Manuel
  • Beltrán, Ana M.
  • Fernández-Afonso, Yilian
  • Fuente, Jesús M. de la
  • Franco, Ricardo
  • Pereira, Eulália
  • García-Martín, María L.
This article belongs to the Special Issue Biomimetic and Functional Nanomaterials for Molecular Imaging., In this study, we report the synthesis of gold-coated iron oxide nanoparticles capped with polyvinylpyrrolidone (Fe@Au NPs). The as-synthesized nanoparticles (NPs) exhibited good stability in aqueous media and excellent features as contrast agents (CA) for both magnetic resonance imaging (MRI) and X-ray computed tomography (CT). Additionally, due to the presence of the local surface plasmon resonances of gold, the NPs showed exploitable “light-to-heat” conversion ability in the near-infrared (NIR) region, a key attribute for effective photothermal therapies (PTT). In vitro experiments revealed biocompatibility as well as excellent efficiency in killing glioblastoma cells via PTT. The in vivo nontoxicity of the NPs was demonstrated using zebrafish embryos as an intermediate step between cells and rodent models. To warrant that an effective therapeutic dose was achieved inside the tumor, both intratumoral and intravenous routes were screened in rodent models by MRI and CT. The pharmacokinetics and biodistribution confirmed the multimodal imaging CA capabilities of the Fe@AuNPs and revealed constraints of the intravenous route for tumor targeting, dictating intratumoral administration for therapeutic applications. Finally, Fe@Au NPs were successfully used for an in vivo proof of concept of imaging-guided focused PTT against glioblastoma multiforme in a mouse model., Financial support was provided by the Spanish Ministry of Economy, Industry and Competitiveness (CTQ2017-86655-R and BIO2017-84246-C2-1-R), Fondo Social de la DGA (grupos DGA) and by the Regional Ministry of Health of Andalusia (OH-0026-2018). This work was supported by the Associate Laboratory for Green Chemistry—LAQV, and by the Applied Molecular Biosciences Unit –UCIBIO, both financed by Portuguese national funds from FCT/MCTES (UIDB/04378/2020 and UIDB/50006/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interaction of differently sized, shaped, and functionalized silver and gold nanoparticles with glycosylated versus nonglycosylated transferrin

  • Barbir, Rinea
  • Ramírez-Jiménez, Rafael
  • Martín-Rapún, Rafael
  • Strasser, Vida
  • Domazet Jurašin, Darija
  • Dabelić, Sanja
  • Fuente, Jesús M. de la
  • Vinković Vrček, Ivana
Exposure of nanomaterials (NMs) to biological medium results in their direct interaction with biomolecules and the formation of a dynamic biomolecular layer known as the biomolecular corona. Despite numerous published data on nano-biointeractions, the role of protein glycosylation in the formation, characteristics, and fate of such nano-biocomplexes has been almost completely neglected, although most serum proteins are glycosylated. This study aimed to systematically investigate the differences in interaction of metallic NPs with glycosylated vs nonglycosylated transferrin. To reach this aim, we compared interaction mechanisms between differently sized, shaped, and surface-functionalized silver NMs and gold NMs to commercially available human transferrin (TRF), a glycosylated protein, and to its nonglycosylated recombinant form (ngTRF). Bovine serum albumin (BSA) was also included in the study for comparative purposes. Characterization of NMs was performed using transmission electron microscopy and dynamic and electrophoretic light scattering techniques. Fluorescence quenching and circular dichroism methods were used to evaluate protein binding constants on the nanosurface and conformational changes after the protein–NM interactions, respectively. Competitive binding of TRF, ngTRF, and BSA to the surface of different NMs was evaluated by separating them after extraction from protein corona by gel electrophoresis following quantification with a commercial protein assay. The results showed that the binding strength between NMs and transferrin and the changes in the secondary protein structure largely depend not only on NM physicochemical properties but also on the protein glycosylation status. Data gained by this study highlight the relevance of protein glycosylation for all future design, development, and efficacy and safety assessment of NMs., This study is based upon collaborative work from COST Action CA 17140 “Cancer Nanomedicine from the Bench to the Bedside” supported by COST (European Cooperation in Science and Technology). It was financially supported by the “Research Cooperability” Program of the Croatian Science Foundation funded by the European Union from the European Social Fund under the Operational Programme Efficient Human Resources 2014–2020 (grant HRZZ-PZS-2019-02-4323), Ministerio de Ciencia e Innovacion (Spain, grant BIO2017–84246-C2–1-R), Fondo Social de la DGA (grupos DGA), and Croatian Science Foundation (grant number HRZZ-IP-2016-06-2436). The authors would like to acknowledge the use of the Advanced Microscopy Laboratory (INMA-Universidad de Zaragoza) for access to their instrumentation and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nano-second laser interference photoembossed microstructures for enhanced cell alignment

  • Martínez, Alba
  • González-Lana, Sandra
  • Asín, Laura
  • Fuente, Jesús M. de la
  • Bastiaansen, Cees W. M.
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in Spain (2020,2021)., Photoembossing is a powerful photolithographic technique to prepare surface relief structures relying on polymerization-induced diffusion in a solventless development step. Conveniently, surface patterns are formed by two or more interfering laser beams without the need for a lithographic mask. The use of nanosecond pulsed light-based interference lithography strengthens the pattern resolution through the absence of vibrational line pattern distortions. Typically, a conventional photoembossing protocol consists of an exposure step at room temperature that is followed by a thermal development step at high temperature. In this work, we explore the possibility to perform the pulsed holographic exposure directly at the development temperature. The surface relief structures generated using this modified photoembossing protocol are compared with those generated using the conventional one. Importantly, the enhancement of surface relief height has been observed by exposing the samples directly at the development temperature, reaching approximately double relief heights when compared to samples obtained using the conventional protocol. Advantageously, the light dose needed to reach the optimum height and the amount of photoinitiator can be substantially reduced in this modified protocol, demonstrating it to be a more efficient process for surface relief generation in photopolymers. Kidney epithelial cell alignment studies on substrates with relief-height optimized structures generated using the two described protocols demonstrate improved cell alignment in samples generated with exposure directly at the development temperature, highlighting the relevance of the height enhancement reached by this method. Although cell alignment is well-known to be enhanced by increasing the relief height of the polymeric grating, our work demonstrates nano-second laser interference photoembossing as a powerful tool to easily prepare polymeric gratings with tunable topography in the range of interest for fundamental cell alignment studies., Funding has been received from Spanish MICINN project BIO2017-84246-C2-1-R, Gobierno de Aragón and FEDER (EU). SGL was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Selective magnetic nanoheating: Combining iron oxide nanoparticles for multi-hot-spot induction and sequential regulation

  • Ovejero, Jesús G.
  • Armenia, Ilaria
  • Serantes, David
  • Veintemillas-Verdaguer, S.
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Grüttner, Cordula
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Grazú, Valeria
The contactless heating capacity of magnetic nanoparticles (MNPs) has been exploited in fields such as hyperthermia cancer therapy, catalysis, and enzymatic thermal regulation. Herein, we propose an advanced technology to generate multiple local temperatures in a single-pot reactor by exploiting the unique nanoheating features of iron oxide MNPs exposed to alternating magnetic fields (AMFs). The heating power of the MNPs depends on their magnetic features but also on the intensity and frequency conditions of the AMF. Using a mixture of diluted colloids of MNPs we were able to generate a multi-hot-spot reactor in which each population of MNPs can be selectively activated by adjusting the AMF conditions. The maximum temperature reached at the surface of each MNP was registered using independent fluorescent thermometers that mimic the molecular link between enzymes and MNPs. This technology paves the path for the implementation of a selective regulation of multienzymatic reactions., This work was funded by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), the Spanish Ministry of Economy and Competitiveness under Grant No. MAT2017-88148-R (AEI/FEDER, UE) and the PIE-201960E062 project, AEI (BIO2017-84246-C2-1-R project to V.G. and J.M.F., and PID2019-109514RJ-100 to D.S.), Nanotechnology in translational hyperthermia (HIPERNANO) - RED2018-102626-T, and Fondo Social de la DGA (grupos DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unveiling the role of surface, size, shape and defects of iron oxide nanoparticles for theranostic applications

  • Cotin, Geoffrey
  • Blanco-Andujar, Cristina
  • Perton, Francis
  • Asín, Laura
  • Fuente, Jesús M. de la
  • Reichardt, Wilfried
  • Schaffner, Denise
  • Ngyen, Dinh-Vu
  • Mertz, Damien
  • Kiefer, Céline
  • Meyer, Florent
  • Spassov, Simo
  • Ersen, Ovidiu
  • Chatzidakis, Michael
  • Botton, Gianluigi A.
  • Hénoumont, Céline
  • Laurent, Sophie
  • Grenèche, Jean Marc
  • Teran, Francisco J.
  • Ortega, Daniel
  • Felder-Flesch, Delphine
  • Begin-Colin, Sylvie
Iron oxide nanoparticles (IONPs) are well-known contrast agents for MRI for a wide range of sizes and shapes. Their use as theranostic agents requires a better understanding of their magnetic hyperthermia properties and also the design of a biocompatible coating ensuring their stealth and a good biodistribution to allow targeting of specific diseases. Here, biocompatible IONPs of two different shapes (spherical and octopod) were designed and tested in vitro and in vivo to evaluate their abilities as high-end theranostic agents. IONPs featured a dendron coating that was shown to provide anti-fouling properties and a small hydrodynamic size favoring an in vivo circulation of the dendronized IONPs. While dendronized nanospheres of about 22 nm size revealed good combined theranostic properties (r2 = 303 mM s−1, SAR = 395 W gFe−1), octopods with a mean size of 18 nm displayed unprecedented characteristics to simultaneously act as MRI contrast agents and magnetic hyperthermia agents (r2 = 405 mM s−1, SAR = 950 W gFe−1). The extensive structural and magnetic characterization of the two dendronized IONPs reveals clear shape, surface and defect effects explaining their high performance. The octopods seem to induce unusual surface effects evidenced by different characterization techniques while the nanospheres show high internal defects favoring Néel relaxation for magnetic hyperthermia. The study of octopods with different sizes showed that Néel relaxation dominates at sizes below 20 nm while the Brownian one occurs at higher sizes. In vitro experiments demonstrated that the magnetic heating capability of octopods occurs especially at low frequencies. The coupling of a small amount of glucose on dendronized octopods succeeded in internalizing them and showing an effect of MH on tumor growth. All measurements evidenced a particular signature of octopods, which is attributed to higher anisotropy, surface effects and/or magnetic field inhomogeneity induced by tips. This approach aiming at an analysis of the structure–property relationships is important to design efficient theranostic nanoparticles., The Region Alsace, France, and the Labex Chimie des Systemes Complexes, University of Strasbourg, France are gratefully acknowledged for the doctoral fellowship to Geoffrey Cotin. This research project was also co-funded by Labex CSC, Alsace contre le cancer, INCA (project PRTK14, THERAMAG 2014-225) and the INTERREG project NANOTRANSMED. The “NANOTRANSMED” project is co-funded by the European Regional Development Fund (ERDF) and by the Swiss Confederation and the Swiss cantons of Aargau, Basel-Landschaft and Basel-Stadt, in the framework of the INTERREG V Upper Rhine program (“Transcending borders with every project”). The authors thank Morgane Rabineau for epifluorescence imaging and Nadia Messaddeq for TEM imaging of cells. The authors thank the Center for Microscopy and Molecular Imaging (CMMI, supported by the European Regional Development Fund and the Walloon Region). This work was supported by the Fond National de la Recherche Scientifique (FNRS), UIAP VII, ARC Programs of the French Community of Belgium and the Walloon region (Gadolymph and Holocancer programs). All the authors acknowledge the COST action TD1402 “RADIOMAG”. D. Ortega and F. J. Teran acknowledge support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686), the Spanish Ministry of Economy and Competitiveness for the NANOLICO project (MAT2017-85617-R), the Spanish Ministry of Science through the NaNoCAR grant PID2020-117544RB-I00, the Ramón y Cajal grant RYC2018-025253-I and Research Networks grant RED2018-102626-T, the HEATOOLS project (BIO2017-84246-C2-1-R), the Comunidad de Madrid for grant NANOMAGCOST (P2018/NMT-4321), DGA for public funding from Fondo Social (grupos DGA), and the European Commission for the funding received through the H2020 “NoCanTher” project (GA No. 685795)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Advanced manufacturing of polymeric materials: From molecule to application through processing

  • Sánchez-Somolinos, Carlos
Resumen del trabajo presentado al nanoGe Fall Meeting, celebrado online del 18 al 22 de octubre de 2021., PRIME has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010. STORM-BOTS has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956150. Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragon and FEDER (EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fast photo-induced mechanical response for light-driven robotic functions with 4D printed liquid cristal elastomers

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Resumen del trabajo presentado al nanoGe Fall Meeting, celebrado online del 18 al 22 de octubre de 2021., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragon project LMP150_18, and FEDER (EU). D.J.B. thanks the European Research Commission (ERC) Advanced Grant 66999 (VIBRATE). D.L. thanks the Netherlands Organization of Scientific Research (NWO) VENI grant 15135., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Conjugating his-tagged proteins to magnetic nanoparticles: tips and challenges

  • Armenia, Ilaria
  • Bussolari, Francesca
  • Vyas, Anisha
  • Macedo de Melo, Eduardo
  • Zeballos, Nicoll
  • Ovejero, Jesús G.
  • Bolivar, Juan M.
  • Veintemillas-Verdaguer, S.
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • López-Gallego, Fernando
  • Rother, Dörte
  • Nidetzky, Bernd
  • Grazú, Valeria
Resumen del póster presentado al 5th Multistep Enzyme Catalyzed Processes Congress (MECPC), celebrado online del 13 al 16 de septiembre de 2021., The histidine tag (His-tag) is one of the most used affinity-tag for protein purification due to its small size and versatility. Agarose and sepharose beads containing nitriloacetic acid (NTA) transition metal derivatives are widely used for the purification of His-tagged proteins, thanks to their high affinity to the His-tag genetically fused to the protein of interest [1]. The same chemistry can be used to conjugate enzymes to magnetic nanoparticles (MNPs) with the aim of tuning their activity by magnetic heating [2, 3]. Within the frame of the FET-OPEN project HOTZYMES (https://www.hotzymes.eu), different MNPs have been synthetized and coated with polyacrylic acid and dimercaptosuccinic acid, and then were further functionalized with NTA-Cu2+ as His-tag chelating agent. Different proteins were expressed as His-tag variants and immobilized on the MNPs, including monomeric (superfolded GFP), dimeric (C. violaceum transaminase, CvTA; C. uda cellobiose phosphorylase, CuCbP), and tetrameric (B. stearothermophilus alcohol dehydrogenase, ADH) variants. While for the monomeric protein selected as model no difficulties in the bioconjugation processes were observed, when using dimeric or tetrameric enzymes the aggregation of the MNPs occurs very easily due to crosslinking between the nanoparticles. This colloidal destabilization of the MNPs is favored due to its high surface area and the presence of several tags per enzyme molecule. To avoid this situation, different strategies have been developed: saturation of the binding site of the nanoparticles, presence of a small percentage of imidazole in reaction, changes in the incubation conditions (pH, ionic strength, …). First positive results confirm that by playing with different factors it is possible to conjugate different His-tagged enzymes to very different MNPs in terms of size, shape, surface area, and colloidal stability. Actually, it is possible to avoid protein and MNPs aggregation while obtaining good activity yields for the conjugated enzymes and maintaining the magnetic heating capacity of the MNPs., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R, DGA and Fondos Feder (Bionanosurf E15_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Coupling proteins to magnetic nanoparticles for tuning their properties by magnetic heating

  • Armenia, Ilaria
  • Bussolari, Francesca
  • Zeballos, Nicoll
  • Ovejero, Jesús G.
  • Veintemillas-Verdaguer, S.
  • Fuente, Jesús M. de la
  • López-Gallego, Fernando
  • Morales, María Del Puerto
  • Grazú, Valeria
Resumen del póster presentado al 5th Multistep Enzyme Catalyzed Processes Congress (MECPC), celebrado online del 13 al 16 de septiembre de 2021., It is well known that magnetic nanoparticles (MNPs) absorb magnetic energy when exposed to an alternating magnetic field (AMF) and therefore dissipate heat in their local environment. So far, the heat dissipated by the MNPs has been widely used in biomedicine for cancer treatment and drug delivery. The FET-OPEN project HOTZYMES proposes instead to exploit this property for the biotechnological production of pharmaceuticals and bio-commodities, by conjugating thermophilic enzymes on the MNPs surface in order to selectively tune their activity by triggering this highly localized magnetic heating while maintaining the reaction media at low temperature., To this aim superparamagnetic iron oxide nanoparticles coated with different organic shells (dimercaptusuccinic acid, DMSA; polyacrylic acid, PAA) have been selected due to their good colloidal stability, high density of functionalizable chemical groups (-COOH) and a good combination of different heating efficiencies. They have been further functionalized with NTA-Cu2+, a chelating agent commonly used in protein purification by metal affinity interaction. Herein, we demonstrate that we can selectively bind a His-tag variant of the superfolded GFP protein, thanks to the high affinity of the immobilized copper to the 6xhistidine tag genetically fused to the protein. Furthermore, using the same strategy, we were able to bind the tetrameric recombinant His-tag variant of the B. stearothermophilus alcohol dehydrogenase (ADH) with also high specificity. Additionally, we demonstrate that the application of an AMF to the selected protein@MNPs derivatives can lead to the generation of different temperature gradients on the MNPs surface by studying both the GFP fluorescence (that strongly depends on temperature), and the effect of the triggered local heating on ADH activity. These first results suggest the feasibility of tuning remotely protein properties by combining their coupling to MNPs with the application of alternating magnetic fields., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020- FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R and DGA and Fondos Feder (Bionanosurf E15_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Magnetic nanoparticles coated with metallic hydroxides as supports for protein purification and immobilization

  • Armenia, Ilaria
  • Ovejero, Jesús G.
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Morales, María Del Puerto
  • Fuente, Jesús M. de la
  • Grazú, Valeria
Resumen del trabajo presentado a la 4th Spanish Conference on Biomedical Applications of Nanomaterials (SBAN), celebrada online del 2 al 4 de junio de 2021., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R, DGA and Fondos Feder (Bionanosurf E15_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Surface functionalization to control biomimetic mechanical environment in cop based microfluidic devices

  • González-Lana, Sandra
  • Randelovic, Teodora
  • Monge, Rosa
  • Ciriza, Jesús
  • Ochoa, Ignacio
  • Sánchez-Somolinos, Carlos
Trabajo presentado al Meeting European Organ-on-Chip Society (EUROoCS), celebrado online del 1 al 2 de julio de 2021., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 829010 (PRIME), FEDER, Spanish MINECO project (BIO2017-84246- C2-1-R), PGC2018-097257-B-C31, NEOTEC funding from CDTI (SNEO-20181019) and Gobierno de Aragón. SGL was funded by Spanish MINECO fellowship (DI-17-09585)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From bench to cell: A roadmap for assessing the bioorthogonal "click" reactivity of magnetic nanoparticles for cell surface engineering

  • Idiago López, Francisco Javier
  • Moreno Antolín, Eduardo
  • Eceiza, Maite
  • Aizpurua, Jesús M.
  • Grazú, Valeria
  • Fuente, Jesús M. de la
  • Fratila, Raluca M.
In this work, we report the use of bioorthogonal chemistry, specifically the strain-promoted click azide–alkyne cycloaddition (SPAAC) for the covalent attachment of magnetic nanoparticles (MNPs) on living cell membranes. Four types of MNPs were prepared, functionalized with two different stabilizing/passivation agents (a polyethylene glycol derivative and a glucopyranoside derivative, respectively) and two types of strained alkynes with different reactivities: a cyclooctyne (CO) derivative and a dibenzocyclooctyne (DBCO) derivative. The MNPs were extensively characterized in terms of physicochemical characteristics, colloidal stability, and click reactivity in suspension. Then, the reactivity of the MNPs toward azide-modified surfaces was evaluated as a closer approach to their final application in a living cell scenario. Finally, the DBCO-modified MNPs, showing superior reactivity in suspension and on surfaces, were selected for cell membrane immobilization via the SPAAC reaction on the membranes of cells engineered to express azide artificial reporters. Overall, our work provides useful insights into the appropriate surface engineering of nanoparticles to ensure a high performance in terms of bioorthogonal reactivity for biological applications., This work has been supported by the European Commission, MagicCellGene Project (M-ERA.NET COFUND call 2016, funded by Ministerio de Economía y Competitividad, MINECO, Spain in the framework of the PCIN-2017-060 project), Ministerio de Innovación, Ciencia y Universidades (MCIU, PGC2018-096016-B-I00 to R.M.F), Ministerio de Economía, Industria y Competitividad (BIO 2017-84246-C2-1R to V.G. and J.M.F.), and MINECO and FSE/Agencia Estatal de Investigación (Ramón y Cajal subprogram, grant RYC-2015-17640 to R.M.F.). J.I.L. and E.M.A acknowledge financial support for their predoctoral fellowships from Gobierno de Aragón (DGA 2017–2021 call, co-funded by the Programa Operativo Fondo Social Europeo de Aragón 2014–2020) and Ministerio de Universidades (FPU17/02024), respectively. Authors also acknowledge support from Gobierno de Aragón and Fondos Feder for funding the Bionanosurf (E15_20R) research group. J.M.A. and M.E. acknowledge support from the Basque Government (GIC-2015_IT-1033-16)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Photonic and magnetic materials for on-demand local drug delivery

  • Armenia, Ilaria
  • Cuestas-Ayllón, Carlos
  • Torres Herrero, Beatriz
  • Bussolari, Francesca
  • Alfranca, Gabriel
  • Grazú, Valeria
  • Fuente, Jesús M. de la
Nanomedicine has been considered a promising tool for biomedical research and clinical practice in the 21st century because of the great impact nanomaterials could have on human health. The generation of new smart nanomaterials, which enable time- and space-controlled drug delivery, improve the limitations of conventional treatments, such as non-specific targeting, poor biodistribution and permeability. These smart nanomaterials can respond to internal biological stimuli (pH, enzyme expression and redox potential) and/or external stimuli (such as temperature, ultrasound, magnetic field and light) to further the precision of therapies. To this end, photonic and magnetic nanoparticles, such as gold, silver and iron oxide, have been used to increase sensitivity and responsiveness to external stimuli. In this review, we aim to report the main and most recent systems that involve photonic or magnetic nanomaterials for external stimulus-responsive drug release. The uniqueness of this review lies in highlighting the versatility of integrating these materials within different carriers. This leads to enhanced performance in terms of in vitro and in vivo efficacy, stability and toxicity. We also point out the current regulatory challenges for the translation of these systems from the bench to the bedside, as well as the yet unresolved matter regarding the standardization of these materials., The research for this work has received funding from: grant PID2020-118485RB-I00 funded by Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, the European Union (EU) projects HOTZYMES (grant agreement n° 829162) and PRIME (grant agreement n° 829010) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01 and DGA and Fondos Feder (Bionanosurf E15_17R). This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. This research work was also funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC’s Global Health Platform (PTI Salud Global). F.B. also thanks Spanish MINECO project BIO2017-84246-C2-1-R for the FPI grant, G.A. is grateful for the Juan de la Cierva-formación (FJC2020-043450-I) funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and B.T. is grateful for the FPU predoctoral contract (FPU19/01311) from Ministerio de Educación Cultura y Deporte (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Building enzyme nanohybrids for AMF-triggered cancer therapy

  • Torres Herrero, Beatriz
  • Armenia, Ilaria
  • Ortiz, Cecilia
  • Fuente, Jesús M. de la
  • Betancourt, Lorena
  • Grazú, Valeria
Resumen del trabajo presentado a la International Conference on Nanomaterials Applied To Life Sciences (NALS), celebrada en Santander (España) del 27 al 29 de abril de 2022., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R, DGA and Fondos Feder (Bionanosurf E15_17R). Author is grateful for a predoctoral fellowship FPU (FPU19/01311)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Combining iron oxide nanoparticles and fluorescent protein for selective magnetic nanoheating studies

  • Armenia, Ilaria
  • Ovejero, Jesús G.
  • Serantes, David
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Grazú, Valeria
Resumen del póster presentado a la 13th International Conference on the Scientific and Clinical Applications of Magnetic Carriers, celebrada en London (UK) del 14 al 17 de junio de 2022., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R and DGA and Fondos Feder (Bionanosurf E15_17R), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Magnetic heating to trigger entrapped enzymes activity

  • Bussolari, Francesca
  • Torres Herrero, Beatriz
  • Armenia, Ilaria
  • López-Gallego, Fernando
  • Morales, María Del Puerto
  • Betancourt, Lorena
  • Fuente, Jesús M. de la
  • Grazú, Valeria
Resumen del trabajo presentado a la 13th International Conference on the Scientific and Clinical Applications of Magnetic Carriers, celebrada en London (UK) del 14 al 17 de junio de 2022., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R and DGA and Fondos Feder (Bionanosurf E15_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

AMF-triggered cancer therapy using enzyme-silica nanohybrids

  • Armenia, Ilaria
  • Torres Herrero, Beatriz
  • Ortiz, Cecilia
  • Fuente, Jesús M. de la
  • Betancourt, Lorena
  • Grazú, Valeria
Resumen del trabajo presentado a la Conference on Advanced Materials and Devices for Nanomed (AMA4MED), celebrada en Valencia (España) del 3 al 4 de mayo de 2022., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R, DGA and Fondos Feder (Bionanosurf E15_17R). Author is grateful for a predoctoral fellowship FPU (FPU19/01311)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanoactuators for cancer therapy

  • Grazú, Valeria
Resumen del trabajo presentado a la Conference on Advanced Materials and Devices for Nanomed (AMA4MED), celebrada en Valencia (España) del 3 al 4 de mayo de 2022., The research for this work has received funding from the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Programme Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01. Authors also thank Spanish MINECO project BIO2017-84246-C2-1-R and DGA., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanobiocatalysis: opportunities for remote enzymatic control by nanuactuation

  • Armenia, Ilaria
Resumen del trabajo presentado al IX Iberian Meeting on Colloids and Interfaces, celebrado en Santiago de Compostela (Espaañ) del 10 al 13 de julio de 2022., The research for this work has received funding from: i) the European Union (EU) project HOTZYMES (grant agreement n° 829162) under EU’s Horizon 2020 Program Research and Innovation actions H2020-FETOPEN-2018-2019-2020-01; ii) Spanish MINECO BIO2017-84246-C2-1-R project; iii) MICINN/AEI PID2020-118485RBI00 project; and iv) DGA and Fondos Feder (Bionanosurf E15_17R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Melt electrowriting of liquid crystal elastomer scaffolds with programmed mechanical response

  • Javadzadeh, Mehrzad
  • Barrio, Jesús del
  • Sánchez-Somolinos, Carlos
This paper is dedicated to Prof. Mark Warner, a pioneer in LCE theory, an exceptional researcher, and an appreciated co-worker and friend., Recently, significant advances have been achieved to precisely program the response of liquid crystal elastomers (LCEs) through extrusion-based additive manufacturing techniques; however, important challenges remain, especially when well-defined scaffolds based on ultrafine fibers are required. Here the melt electrowriting of reactive liquid crystalline inks, leading, after ultraviolet-light-induced crosslinking, to digitally positioned uniform LCE fibers with diameters ranging from hundreds of nanometers to tens of micrometers is presented, which is hardly accessible with conventional extrusion-based printing techniques. The electrowriting process induces the preferential alignment of the mesogens parallel to the fiber's axis. Such an alignment, defined by the printing path, determines the mechanical response of the crosslinked material upon stimulation. This manufacturing platform allows the preparation of open square lattice scaffolds with ultrafine fibers (a few micrometers in diameter), periods as small as 90 µm, and well-defined morphology. Additionally, the combination of accurate fiber stacking (up to 50 layers) and fiber fusion between layers leads to unprecedented microstructures composed of high-aspect-ratio LCE thin walls. The possibility of digitally controlling the printing of fibers allows the preparation complex fiber-based scaffolds with programmed and reversible shape-morphing, thus opening new avenues to prepare miniaturized actuators and smart structures for soft robotics and biomedical applications., The described research study was a part of the project PRIME. This project has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). The Spanish “Ministerio de Ciencia, Innovación y Universidades (MCIU)” provided funding for this work through AEI/FEDER(UE) project PID2020-118485RB-I00; Spanish MINECO project BIO2017-84246- C2-1-R; Gobierno de Aragón project LMP221_21, FEDER (EU); through the “Fondo Social Europeo” (DGA E47_20R). J.D.B acknowledges grant RYC-2015-18471, funded by MCIN/AEI/10.13039/501100011033 and by “European Social Fund Investing in your future;” and grant CTQ2017-84087-R supported by MCIN/ AEI /10.13039/501100011033, and by “European Regional Development Fund a way of making Europe” by the European Union. This research was also supported by CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación. C.S.S. would like to thank the FAB3D interdisciplinary platform (PTI-CSIC) for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The intracellular number of magnetic nanoparticles modulates the apoptotic death pathway after magnetic hyperthermia treatment

  • Beola, Lilianne
  • Asín, Laura
  • Roma-Rodrigues, Catarina
  • Fernández-Afonso, Yilian
  • Fratila, Raluca M.
  • Serantes, David
  • Ruta, Sergiu
  • Chantrell, Roy W.
  • Fernandes, Alexandra R.
  • Baptista, Pedro V.
  • Fuente, Jesús M. de la
  • Grazú, Valeria
  • Gutiérrez, Lucía
Magnetic hyperthermia is a cancer treatment based on the exposure of magnetic nanoparticles to an alternating magnetic field in order to generate local heat. In this work, 3D cell culture models were prepared to observe the effect that a different number of internalized particles had on the mechanisms of cell death triggered upon the magnetic hyperthermia treatment. Macrophages were selected by their high capacity to uptake nanoparticles. Intracellular nanoparticle concentrations up to 7.5 pg Fe/cell were measured both by elemental analysis and magnetic characterization techniques. Cell viability after the magnetic hyperthermia treatment was decreased to <25% for intracellular iron contents above 1 pg per cell. Theoretical calculations of the intracellular thermal effects that occurred during the alternating magnetic field application indicated a very low increase in the global cell temperature. Different apoptotic routes were triggered depending on the number of internalized particles. At low intracellular magnetic nanoparticle amounts (below 1 pg Fe/cell), the intrinsic route was the main mechanism to induce apoptosis, as observed by the high Bax/Bcl-2 mRNA ratio and low caspase-8 activity. In contrast, at higher concentrations of internalized magnetic nanoparticles (1-7.5 pg Fe/cell), the extrinsic route was observed through the increased activity of caspase-8. Nevertheless, both mechanisms may coexist at intermediate iron concentrations. Knowledge on the different mechanisms of cell death triggered after the magnetic hyperthermia treatment is fundamental to understand the biological events activated by this procedure and their role in its effectiveness., This work was funded by the European Commission through the M-ERA.NET COFUND Project MagicCellGene (PCIN-2017-060, FCT/MCTES M-ERA NET/2/0008/2016), Spanish MCIU (PGC2018-096016-B-I00 to R.M.F. and L.G. and BIO2017-84246-C2-1-R to J.M.F. and V.G.), the Applied Molecular Biosciences Unit - UCIBIO which is financed by national funds from FCT (UIDB/04378/2020) and Fondo Social de la DGA (grupos DGA). L.B. and Y.F.-A. thank the Santander-Universidad Zaragoza Fellowship program for their Ph.D. fellowships. D.S. acknowledges Xunta de Galicia for financial support under the I2C Plan and the Strategic Grouping in Materials (AeMAT; grant no. ED431E2018/08). This work made use of computational facilities funded by the Small items of research equipment at the University of York ENERGY (grant no. EP/K031589/1). L.B. acknowledges support from Santander Universidad and Erasmus Campus Iberus to perform experimental work at Universidade Nova de Lisboa. L.A. acknowledges support from the José Castillejo program (CAS18/00233). L.G. and R.M.F. acknowledge financial support from the Ramón y Cajal program (RYC-2014-15512 and RYC-2015-17640). The authors would like to acknowledge the use of Servicios Científicos Técnicos del CIBA (IACS-Universidad de Zaragoza), the Advanced Microscopy Laboratory (INA-Universidad de Zaragoza), for access to their instrumentation and expertise and Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Thermal tuning of enzyme activity by magnetic heating

  • Armenia, Ilaria
  • Bussolari, Francesca
  • Sánchez, Manu
  • Gallo-Cordova, Álvaro
  • Ovejero, Jesús G.
  • Macedo de Melo, Eduardo
  • Gamberoni, Federica
  • Borgese, Marina
  • Serio, Simone
  • Guisán, José Manuel
  • Fuente, Jesús M. de la
  • Papait, Roberto
  • Gornati, Rosalba
  • Bernardini, Giovanni
  • Cassinelli, Nicolas
  • Rother, Dörte
  • Morales, María Del Puerto
  • López-Gallego, Fernando
  • Grazú, Valeria
Enzymes are selective, specific, efficient, and more sustainable catalysts than their chemical counterparts. From an industrial perspective, multienzymatic systems to produce chemical compounds are particularly attractive since they comply with most green production principles including the minimization of wastes and their ecological footprints. However, the number of industrial processes based on the use of enzymes as catalysts remains limited. Indeed, incompatibility issues of enzymes with respect to reaction conditions or cross-reactivity are still challenging aspects that make one-pot enzyme cascade reactions hard to perform. The urgent need for more sustainable industrial processes has made different research fields, not accustomed to working together, join efforts to develop innovative technologies that could be key enabling to overcome these challenges. Among these technologies are those that seek to synergistically integrate the specific recognition and unique catalytic properties of enzymes with the size-dependent unique properties of nanoparticles. However, rather than giving a complete overview of the use of nanomaterials in biocatalysts, here it will be discussed the feasibility of triggering magnetic nanoparticles (MNPs) into hotspots by remote nanoactuation for the thermal modulation of discrete enzyme molecules activity with minimal collateral heating., The possibility of heating discrete and defined local regions within a sample offers the potential to introduce a game-changing breakthrough in industrial biocatalysis by achieving coordinated enzyme function and thus concurrent multienzyme reactions. Therefore, not only the principles behind the activation of MNPs as hotspots, but also those examples that report the selective control of enzyme activity by magnetic heating, together with the foreseen challenges for the transfer of this technology to the industry, will be discussed., This work has been supported by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), by Grant PID2020-118485RB-I00 funded by MCIN/AEI/10.13039/501100011033 (to V.G and J.M.F), and by CIBER-Consorcio Centro de Investigación Biomédica en Red-(CB16/01/00263 to J.M), Instituto de Salud Carlos III (Spanish Ministry of Science and Innovation and European Commission, European Regional Development Fund). F.B acknowledges financial support for her predoctoral fellowship (BIO2017-84246-C2-1-R) funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future.” J.M.F also acknowledges support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. This research was also funded by the European Commission-NextGenerationEU (Regulation EU 2020/2094)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Co-delivery of free vancomycin and transcription factor decoy-nanostructured lipid carriers can enhance inhibition of methicillin resistant Staphylococcus aureus (MRSA)

  • Hibbitts, Alan
  • Lucía, Ainhoa
  • Serrano-Sevilla, Inés
  • De Matteis, Laura
  • McArthur, Michael
  • Fuente, Jesús M. de la
  • Aínsa, José A.
  • Navarro, Fabrice
Bacterial resistance to antibiotics is widely regarded as a major public health concern with last resort MRSA treatments like vancomycin now encountering resistant strains. TFDs (Transcription Factor Decoys) are oligonucleotide copies of the DNA-binding sites for transcription factors. They bind to and sequester the targeted transcription factor, thus inhibiting transcription of many genes. By developing TFDs with sequences aimed at inhibiting transcription factors controlling the expression of highly conserved bacterial cell wall proteins, TFDs present as a potential method for inhibiting microbial growth without encountering typical resistance mechanisms. However, the efficient protection and delivery of the TFDs inside the bacterial cells is a critical step for the success of this technology. Therefore, in our study, specific TFDs against S. aureus were complexed with two different types of nanocarriers: cationic nanostructured lipid carriers (cNLCs) and chitosan-based nanoparticles (CS-NCs). These TFD-carrier nanocomplexes were characterized for size, zeta potential and TFD complexation or loading efficiency in a variety of buffers. In vitro activity of the nanocomplexes was examined alone and in combination with vancomycin, first in methicillin susceptible strains of S. aureus with the lead candidate advancing to tests against MRSA cultures. Results found that both cNLCs and chitosan-based carriers were adept at complexing and protecting TFDs in a range of physiological and microbiological buffers up to 72 hours. From initial testing, chitosan-TFD particles demonstrated no visible improvements in effect when co-administered with vancomycin. However, co-delivery of cNLC-TFD with vancomycin reduced the MIC of vancomycin by over 50% in MSSA and resulted in significant decreases in viability compared with vancomycin alone in MRSA cultures. Furthermore, these TFD-loaded particles demonstrated very low levels of cytotoxicity and haemolysis in vitro. To our knowledge, this is the first attempt at a combined antibiotic/oligonucleotide-TFD approach to combatting MRSA and, as such, highlights a new avenue of MRSA treatment combining traditional small molecules drugs and bacterial gene inhibition., This work was undertaken as part of the Nano-therapeutics for Antibiotic Resistant Emerging Bacterial Pathogens (NAREB) European research network supported by the EU FP7 under grant agreement 604237. JMF, LM and ISS thank the financial support from the Ministerio de Ciencia, Innovación y Universidades (BIO2017-84246-C2-1-R) and Gobierno de Aragón and Fondos Feder (Bionanosurf E15_17R). ISS acknowledges Ministerio de Economía y Competitividad del Gobierno de España for her FPI grant (BES-2015-071304). JAA ackowledges funding from the Ministerio de Ciencia, Innovación y Universidades (SAF2017-84839-C2-2-R) and Gobierno de Aragón and Fondos Feder (Grupo de Genética de Micobacterias B35 17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Four-dimensional printed liquid crystalline elastomer actuators with fast photoinduced mechanical response toward light-driven robotic functions

  • Ceamanos, Lorena
  • Kahveci, Zehra
  • López-Valdeolivas, María
  • Liu, Danqing
  • Broer, Dirk J.
  • Sánchez-Somolinos, Carlos
Remote light exposure of photoresponsive liquid crystalline polymers has drawn great attention over the last years as an attractive strategy to generate mechanical work with high spatial resolution. To tailor these materials into practical engineering devices, it is of key importance to gain control over their morphology and thus precisely program their mechanical response, which must also be fast and relevant in magnitude. In this communication, we report the four-dimensional (4D) printing of azobenzene-containing liquid crystalline elastomers (LCEs) that respond to light. During extrusion of the LCE precursor, mesogen orientation is defined by the needle’s moving direction enabling a precise definition of the director, which is later fixed by photopolymerization. Fast mechanical responses have been observed in these 4D printed LCE elements when excited with ultraviolet (UV) light. These 4D printed elements lift objects many times heavier than their own weight, demonstrating a capacity to produce effective work. Photochemical and photothermal contributions to the deformation and force have been identified. Advantageously, the use of blue and UV light excitation enables adjustment of generated forces that can be maintained even in the dark and can be released by light excitation or temperature. The demonstrated ability to generate light-responsive elements quickly delivering sufficient work paves the way for implementing remotely addressed mechanical functions to future soft robotics and engineering., The described research study is part of the project PRIME. This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 829010 (PRIME). Funding has also been received from the Spanish MINECO project BIO2017-84246-C2-1-R, Gobierno de Aragón project LMP150_18, and FEDER (EU). D.J.B. thanks the European Research Commission (ERC) Advanced Grant 66999 (VIBRATE). D.L. thanks the Netherlands Organization of Scientific Research (NWO) VENI grant 15135., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Membrane-localized magnetic hyperthermia promotes intracellular delivery of cell-impermeant probes

  • Idiago López, Francisco Javier
  • Ferreira, Daniela
  • Asín, Laura
  • Moros, María
  • Armenia, Ilaria
  • Grazú, Valeria
  • Fernandes, Alexandra R.
  • Fuente, Jesús M. de la
  • Baptista, Pedro V.
  • Fratila, Raluca M.
In this work, we report the disruptive use of membrane-localized magnetic hyperthermia to promote the internalization of cell-impermeant probes. Under an alternating magnetic field, magnetic nanoparticles (MNPs) immobilized on the cell membrane via bioorthogonal click chemistry act as nanoheaters and lead to the thermal disruption of the plasma membrane, which can be used for internalization of different types of molecules, such as small fluorescent probes and nucleic acids. Noteworthily, no cell death, oxidative stress and alterations of the cell cycle are detected after the thermal stimulus, although cells are able to sense and respond to the thermal stimulus through the expression of different types of heat shock proteins (HSPs). Finally, we demonstrate the utility of this approach for the transfection of cells with a small interference RNA (siRNA), revealing a similar efficacy to a standard transfection method based on the use of cationic lipid-based reagents (such as Lipofectamine), but with lower cell toxicity. These results open the possibility of developing new procedures for “opening and closing” cellular membranes with minimal disturbance of cellular integrity. This on-demand modification of cell membrane permeability could allow the direct intracellular delivery of biologically relevant (bio)molecules, drugs and nanomaterials, thus overcoming traditional endocytosis pathways and avoiding endosomal entrapment., This work was supported by the following grants: AEI, Grant PCIN-2017-060 funded by MICIU/AEI/10.13039/501100011033 and co-funded by the European Union (M-ERA.NET COFUND call 2016), grants PGC2018-096016-B-I00 to R. M. F and BIO 2017-84246-C2-1R to V. G. and J. M. F. funded by MICIU/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, grant RYC2015-17640 to R. M. F. and RYC2019-026860-I to M. M. funded by MICIU/AEI/10.13039/501100011033 and by “ESF Investing in your future”, and grant CNS2023-144436 funded by MICIU/AEI/10.13039/501100011033 and by “European Union Next Generation EU/PRTR”. This work was also financed by national funds from FCT – Fundação para a Ciência e a Tecnologia, I. P., in the scope of the project UIDP/04378/2020 and UIDB/04378/2020 of the Research Unit on Applied Molecular Biosciences – UCIBIO and the project LA/P/0140/2020 of the Associate Laboratory Institute for Health and Bioeconomy – i4HB, project M-ERA.NET2/0008/2016, DF also acknowledges the FCT/MCTES grant 2020.06599.BD. J. I. L. acknowledges financial support for his predoctoral fellowships from Gobierno de Aragón (DGA 2017-2021 call, co-funded by the Programa Operativo Fondo Social Europeo de Aragón 2014–2020). L. A. acknowledges support from the José Castillejo program (CAS18/00233). The authors also acknowledge support from Gobierno de Aragón and Fondos Feder for funding the Bionanosurf (E15_23R) research group. The authors would like to acknowledge the use of Servicios Cientifícos Técnicos del CIBA (IACS-Universidad de Zaragoza), the Advanced Microscopy Laboratory (Universidad de Zaragoza), for access to their instrumentation and expertise and for the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, BIOLAB@UCIBIO, NOVA School of Science and Technology for flow cytometry experiments., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enzyme activation by alternating magnetic field: Importance of the bioconjugation methodology

  • Armenia, I.
  • Grazú Bonavia, M.V.
  • De Matteis, L.
  • Ivanchenko, P.
  • Martra, G.
  • Gornati, R.
  • de la Fuente, J.M.
  • Bernardini, G.
Iron oxide nanoparticles (NPs) are attractive materials for enzyme immobilization and, thanks to their superparamagnetism, can be accessed by remote stimuli. This can be exploited to activate molecules that are not remotely actuable. Here, we demonstrate that thermophilic enzymes chemically linked to NPs can be activated in a “wireless” fashion by an external alternate magnetic field (AMF). To this aim, we have conjugated, with different binding strategies, the thermophilic enzymes a-amylase and L-aspartate oxidase to iron oxide NPs obtaining NP-enzyme systems with activities depending on the different orientations and stretching of the enzymes. Since enzyme activation occurs without a significant rise of the “overall” temperature of the systems, we have speculated a local NP-enzyme heating that does not immediately interest the rest of the solution that remains at relatively low temperature, low enough to allow non-thermophilic enzymes to work together with the NP-conjugated thermophilic enzymes. Nanoactuation of thermophilic enzymes by AMF has potential applications in different fields. Indeed, multi-enzymatic processes with enzymes with different temperature optima could be carried out in the same reaction pot and thermolabile products could be efficiently produced by thermophilic enzymes without suffering for the high temperatures. Moreover, our findings represent a proof of concept of the possibility to achieve a fine-tuning of the enzyme-NP system with the aim to intervene in cell metabolism.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Digital luminescence patterning via inkjet printing of a photoacid catalysed organic-inorganic hybrid formulation

  • Alamán, J.
  • López-Valdeolivas, M.
  • Alicante, R.
  • Peña, J.I.
  • Sánchez-Somolinos, C.
Accurate positioning of luminescent materials at the microscale is essential for the further development of diverse application fields including optoelectronics, energy, biotechnology and anti-counterfeiting. In this respect, inkjet printing has recently attracted great interest due to its ability to precisely deposit with high throughput and no contact, functional materials on different types of substrates. Here, we present a novel photoacid catalysed organic-inorganic hybrid luminescent ink. The formulation, containing monomers bearing epoxy and silane functionalities, a photoacid generator and a small percentage of Rhodamine-B, shows good jetting properties and adequate wetting of the deposited droplets on the receiving substrates. Ultraviolet exposure of the deposited material triggers the cationic ring-opening polymerization reaction of the epoxy groups. Concomitantly, if atmospheric water is available, hydrolysis and condensation takes place, overall leading to a luminescent crosslinked hybrid organic-inorganic polymeric material obtained through a simple one-step curing process, without post baking steps. Advantageously, protection of the ink from actinic light delays the hydrolysis and condensation conferring long-term stability to the ink. Digital patterning leads to patterned emissive surfaces and elements with good adhesion to different substrates, mechanical and optical properties for the fabrication of optical and photonic elements and devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Co-delivery of free vancomycin and transcription factor decoy-nanostructured lipid carriers can enhance inhibition of methicillin resistant Staphylococcus aureus (MRSA)

  • Hibbitts, Alan
  • Lucía, Ainhoa
  • Serrano-Sevilla, Inés
  • De Matteis, Laura
  • McArthur, Michael
  • De La Fuente, Jesús M.
  • Aínsa, José A.
  • Navarro, Fabrice
Bacterial resistance to antibiotics is widely regarded as a major public health concern with last resort MRSA treatments like vancomycin now encountering resistant strains. TFDs (Transcription Factor Decoys) are oligonucleotide copies of the DNA-binding sites for transcription factors. They bind to and sequester the targeted transcription factor, thus inhibiting transcription of many genes. By developing TFDs with sequences aimed at inhibiting transcription factors controlling the expression of highly conserved bacterial cell wall proteins, TFDs present as a potential method for inhibiting microbial growth without encountering typical resistance mechanisms. However, the efficient protection and delivery of the TFDs inside the bacterial cells is a critical step for the success of this technology. Therefore, in our study, specific TFDs against S. aureus were complexed with two different types of nanocarriers: cationic nanostructured lipid carriers (cNLCs) and chitosan-based nanoparticles (CSNCs). These TFD-carrier nanocomplexes were characterized for size, zeta potential and TFD complexation or loading efficiency in a variety of buffers. In vitro activity of the nanocomplexes was examined alone and in combination with vancomycin, first in methicillin susceptible strains of S. aureus with the lead candidate advancing to tests against MRSA cultures. Results found that both cNLCs and chitosan-based carriers were adept at complexing and protecting TFDs in a range of physiological and microbiological buffers up to 72 hours. From initial testing, chitosan-TFD particles demonstrated no visible improvements in effect when co-administered with vancomycin. However, co-delivery of cNLC-TFD with vancomycin reduced the MIC of vancomycin by over 50% in MSSA and resulted in significant decreases in viability compared with vancomycin alone in MRSA cultures. Furthermore, these TFD-loaded particles demonstrated very low levels of cytotoxicity and haemolysis in vitro. To our knowledge, this is the first attempt at a combined antibiotic/oligonucleotide-TFD approach to combatting MRSA and, as such, highlights a new avenue of MRSA treatment combining traditional small molecules drugs and bacterial gene inhibition. © 2019 Hibbitts et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dual Role of Magnetic Nanoparticles as Intracellular Hotspots and Extracellular Matrix Disruptors Triggered by Magnetic Hyperthermia in 3D Cell Culture Models

  • Beola, L.
  • Asín, L.
  • Fratila, R.M.
  • Herrero, V.
  • De La Fuente, J.M.
  • Grazú, V.
  • Gutiérrez, L.
Magnetic hyperthermia is a promising therapy for the localized treatment of cancer based on the exposure of magnetic nanoparticles to an external alternating magnetic field. In order to evaluate some of the mechanisms involved in the cellular damage caused by this treatment, two different 3D cell culture models were prepared using collagen, which is the most abundant protein of the extracellular matrix. The same amount of nanoparticles was added to cells either before or after their incorporation into the 3D structure. Therefore, in one model, particles were located only inside cells (In model), while the other one had particles both inside and outside cells (In&Out model). In the In&Out model, the hyperthermia treatment facilitated the migration of the particles from the outer areas of the 3D structure to the inner parts, achieving a faster homogeneous distribution throughout the whole structure and allowing the particles to gain access to the inner cells. The cell death mechanism activated by the magnetic hyperthermia treatment was different in both models. Necrosis was observed in the In model and apoptosis in the In&Out model 24 h after the hyperthermia application. This was clearly correlated with the amount of nanoparticles located inside the cells. Thus, the combination of both 3D models allowed us to demonstrate two different roles of the magnetic particles during the hyperthermia treatment: (i) The modulation of the cell death mechanism depending on the amount of intracellular particles and (ii) the disruption of the collagen matrix caused by the extracellular nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optical planar waveguide sensor with integrated digitally-printed light coupling-in and readout elements

  • Alamán, Jorge
  • López-Valdeolivas, María
  • Alicante, Raquel
  • Sánchez-Somolinos, Carlos
Optical planar waveguide sensors, able to detect and process information from the environment in a fast, cost-effective, and remote fashion, are of great interest currently in different application areas including security, metrology, automotive, aerospace, consumer electronics, energy, environment, or health. Integration of networks of these systems together with other optical elements, such as light sources, readout, or detection systems, in a planar waveguide geometry is greatly demanded towards more compact, portable, and versatile sensing platforms. Herein, we report an optical temperature sensor with a planar waveguide architecture integrating inkjet-printed luminescent light coupling-in and readout elements with matched emission and excitation. The first luminescent element, when illuminated with light in its absorption band, emits light that is partially coupled into the propagation modes of the planar waveguide. Remote excitation of this element can be performed without the need for special alignment of the light source. A thermoresponsive liquid crystal-based film regulates the amount of light coupled out from the planar waveguide at the sensing location. The second luminescent element partly absorbs the waveguided light that reaches its location and emits at longer wavelengths, serving as a temperature readout element through luminescence intensity measurements. Overall, the ability of inkjet technology to digitally print luminescent elements demonstrates great potential for the integration and miniaturization of light coupling-in and readout elements in optical planar waveguide sensing platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Light to Shape the Future: From Photolithography to 4D Printing

  • del Barrio, Jesús
  • Sánchez-Somolinos, Carlos
Over the last few decades, the demand of polymeric structures with well-defined features of different size, dimension, and functionality has increased from various application areas, including microelectronics, biotechnology, tissue engineering, and photonics, among others. The ability of light to control over space and time physicochemical processes is a unique tool for the structuring of polymeric materials, opening new avenues for technological progress in different fields of application. This article gives an overview of various photochemical reactions in polymers, photosensitive materials, and structuring techniques making use of light, and highlights most recent advances, emerging opportunities, and relevant applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Surfactant-free synthesis and scalable purification of triangular gold nanoprisms with low non-specific cellular uptake

  • Ramírez Jiménez, Rafael
  • Artiga, Álvaro
  • Mitchell, Scott G.
  • Martín Rapún, Rafael
  • de la Fuente, Jesús M.
Gold nanoprisms possess remarkable optical properties that make them useful for medical biotechnology applications such as diagnosis and photothermal therapy. However, shape-selective synthesis of gold nanoprisms is not trivial and typically requires either toxic surfactants or time-consuming purification protocols, which can limit their applicability. Here, we show how triangular gold nanoprisms of different sizes can be purified by precipitation using the non-toxic glutathione ligand, thereby removing the need for toxic surfactants and bottleneck purification techniques. The protocol is amenable for direct scaling up as no instrumentation is required in the critical purification step. The new purification method provides a two-fold increased yield in gold nanoprisms compared to electrophoretic filtration, while providing nanoprisms of similar localized surface plasmon resonance wavelength. Crucially, the gold nanoprisms isolated using this methodology show fewer non-specific interactions with cells and lower cellular internalization, which paves the way for a higher selectivity in therapeutic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Stabilization of b-Glucuronidase by Immobilization in Magnetic-Silica Hybrid Supports

  • Correa, S.
  • Ripoll, M.
  • Jackson, E.
  • Grazu, V.
  • Betancor, L.
beta-Glucuronidases are a class of enzymes that catalyze the breakdown of complex carbohydrates. They have well documented biocatalytic applications in synthesis, therapeutics, and analytics that could benefit from enzyme immobilization and stabilization. In this work, we have explored a number of immobilization strategies for Patella vulgata beta-Glucuronidase that comprised a tailored combination of biomimetic silica (Si) and magnetic nanoparticles (MNPs). The individual effect of each material on the enzyme upon immobilization was first tested. Three different immobilization strategies for covalent attachment on MNPs and different three catalysts for the deposition of Si particles were tested. We produced nine different immobilized preparations and only two of them presented negligible activity. All the preparations were in the micro-sized range (from 1299 +/- 52 nm to 2101 +/- 67 nm of hydrodynamic diameter). Their values for polydispersity index varied around 0.3, indicating homogeneous populations of particles with low probability of agglomeration. Storage, thermal, and operational stability were superior for the enzyme immobilized in the composite material. At 80 degrees C different preparations with Si and MNPs retained 40% of their initial activity after 6 h of incubation whereas the soluble enzyme lost 90% of its initial activity within 11 min. Integration of MNPs provided the advantage of reusing the biocatalyst via magnetic separation up to six times with residual activity. The hybrid material produced herein demonstrated its versatility and robustness as a support for beta-Glucuronidases immobilization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nanotechnology-Based Targeted Drug Delivery: An Emerging Tool to Overcome Tuberculosis

  • Baranyai, Z.
  • Soria-Carrera, H.
  • Alleva, M.
  • Millan-Placer, A.C.
  • Lucia, A.
  • Martin-Rapun, R.
  • Ainsa, J.A.
  • de la Fuente, J.M.
The appearance and rapid spread of drug resistant strains of tuberculosis (TB), one of the deadliest infectious diseases, pose a serious threat to public health and increase the need for shorter, less toxic, and more effective therapies. Developing new drugs is difficult and often associated with side effects, so nanotechnology has emerged as a tool to improve current treatments and to rescue drugs having elevated toxicity or poor solubility. Due to their size and surface chemistry, antimicrobial-loaded nanocarriers are avidly taken up by macrophages, the main cells hostingMycobacterium tuberculosis. Macrophages are continuously recruited to infected areas, they can transport drugs with them, making passive targeting a good strategy for TB treatment. Active targeting (decorating surface of nanocarriers with ligands specific to receptors displayed by macrophages) further increases local drug concentration, and thus treatment efficacy. Although in in vivo studies, nanocarriers are often administered intravenously in order to avoid inaccurate dosage in animals, translation to humans requires more convenient routes like pulmonary or oral administration. This report highlights the importance and progress of pulmonary administration, passive and active targeting strategies toward bacteria reservoirs to overcome the challenges in TB treatment. La aparición y la rápida propagación de cepas de tuberculosis (TB) resistentes a los medicamentos, una de las enfermedades infecciosas más mortales, representan una grave amenaza para la salud pública y aumentan la necesidad de tratamientos más breves, menos tóxicos y más eficaces. El desarrollo de nuevos fármacos es difícil y, a menudo, se asocia con efectos secundarios, por lo que la nanotecnología se ha convertido en una herramienta para mejorar los tratamientos actuales y rescatar fármacos que tienen una toxicidad elevada o una solubilidad deficiente. Debido a su tamaño y química de superficie, los nanoportadores cargados de antimicrobianos son absorbidos con avidez por los macrófagos, las principales células que albergan Mycobacterium tuberculosis.. Los macrófagos se reclutan continuamente en las áreas infectadas, pueden transportar medicamentos con ellos, lo que hace que la focalización pasiva sea una buena estrategia para el tratamiento de la TB. La focalización activa (decoración de la superficie de los nanoportadores con ligandos específicos de los receptores mostrados por los macrófagos) aumenta aún más la concentración local del fármaco y, por lo tanto, la eficacia del tratamiento. Aunque en estudios in vivo, los nanotransportadores a menudo se administran por vía intravenosa para evitar dosis inexactas en animales, la traducción a humanos requiere vías más convenientes, como la administración pulmonar u oral. Este informe destaca la importancia y el progreso de la administración pulmonar, las estrategias de orientación pasiva y activa hacia los reservorios de bacterias para superar los desafíos en el tratamiento de la TB.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly efficient t2 cobalt ferrite nanoparticles vectorized for internalization in cancer cells

  • Mazarío, E.
  • Cañete, M.
  • Herranz, F.
  • Sánchez-Marcos, J.
  • de la Fuente, J.M.
  • Herrasti, P.
  • Menéndez, N.
Uniform cobalt ferrite nanoparticles have been synthesized using an electrochemical synthesis method in aqueous media. Their colloidal, magnetic, and relaxometric properties have been analyzed. The novelty of this synthesis relies on the use of iron and cobalt foils as precursors, which assures the reproducibility of the iron and cobalt ratio in the structure. A stable and biocompatible targeting conjugate nanoparticle-folic acid (NP-FA) was developed that was capable of targeting FA receptor positivity in HeLa (human cervical cancer) cancer cells. The biocompatibility of NP-FA was assessed in vitro in HeLa cells using the MTT assay, and morphological analysis of the cytoskeleton was performed. A high level of NP-FA binding to HeLa cells was confirmed through qualitative in vitro targeting studies. A value of 479 Fe+Co mM-1s-1 of transverse relaxivity (r2 ) was obtained in colloidal suspension. In addition, in vitro analysis in HeLa cells also showed an important effect in negative T2 contrast. Therefore, the results show that NP-FA can be a potential biomaterial for use in bio medical trials, especially as a contrast agent in magnetic resonance imaging (MRI).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fe3O4-Au core-shell nanoparticles as a multimodal platform for in vivo imaging and focused photothermal therapy

  • Caro, C.
  • Gámez, F.
  • Quaresma, P.
  • Páez-Muñoz, J.M.
  • Domínguez, A.
  • Pearson, J.R.
  • Pernía Leal, M.
  • Beltrán, A.M.
  • Fernandez-Afonso, Y.
  • Martínez De la Fuente, Jesús
  • Franco, R.
  • Pereira, E.
  • García-Martín, M.L.
In this study, we report the synthesis of gold-coated iron oxide nanoparticles capped with polyvinylpyrrolidone (Fe@Au NPs). The as-synthesized nanoparticles (NPs) exhibited good stability in aqueous media and excellent features as contrast agents (CA) for both magnetic resonance imaging (MRI) and X-ray computed tomography (CT). Additionally, due to the presence of the local surface plasmon resonances of gold, the NPs showed exploitable “light-to-heat” conversion ability in the near-infrared (NIR) region, a key attribute for effective photothermal therapies (PTT). In vitro experiments revealed biocompatibility as well as excellent efficiency in killing glioblastoma cells via PTT. The in vivo nontoxicity of the NPs was demonstrated using zebrafish embryos as an intermediate step between cells and rodent models. To warrant that an effective therapeutic dose was achieved inside the tumor, both intratumoral and intravenous routes were screened in rodent models by MRI and CT. The pharmacokinetics and biodistribution confirmed the multimodal imaging CA capabilities of the Fe@AuNPs and revealed constraints of the intravenous route for tumor targeting, dictating intratumoral administration for therapeutic applications. Finally, Fe@Au NPs were successfully used for an in vivo proof of concept of imaging- guided focused PTT against glioblastoma multiforme in a mouse model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Nanoparticles and bioorthogonal chemistry joining forces for improved biomedical applications

  • Idiago López, J.
  • Moreno Antolín, E.
  • Fuente, J.M. de la
  • Fratila, R.M.
Bioorthogonal chemistry comprises chemical reactions that can take place inside complex biological environments, providing outstanding tools for the investigation and elucidation of biological processes. Its use in combination with nanotechnology can lead to further developments in diverse areas of biomedicine, such as molecular bioimaging, targeted delivery, in situdrug activation, study of cell-nanomaterial interactions, biosensing, etc.Here, we summarise the recent efforts to bring together the unique properties of nanoparticles and the remarkable features of bioorthogonal reactions to create a toolbox of new or improved biomedical applications. We show how, by joining forces, bioorthogonal chemistry and nanotechnology can overcome some of the key current limitations in the field of nanomedicine, providing better, faster and more sensitive nanoparticle-based bioimaging and biosensing techniques, as well as therapeutic nanoplatforms with superior efficacy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Coumarin-Containing Pillar[5]arenes as Multifunctional Liquid Crystal Macrocycles

  • Concellón, A.
  • Romero, P.
  • Marcos, M.
  • Barberá, J.
  • Sánchez-Somolinos, C.
  • Mizobata, M.
  • Ogoshi, T.
  • Serrano, J.L.
  • Del Barrio, J.
Liquid crystal macrocycles (LCMs) combine the unique properties of liquid crystals with those associated with macrocyclic compounds - shape persistence and the capability of hosting small molecules. Herein, we investigate the grafting of coumarin-containing promesogenic moieties to pillar[5]arene as a strategy to obtain multifunctional LCMs. Pillar[5]arenes containing 10 and 30 coumarin units are glassy materials with nematic mesomorphism. Moreover, the coumarin moieties afford the pillar[5]arene derivatives with enhanced film-forming and photoresponsive properties. Photodimerization of the coumarin moieties results in cross-linked polymer networks, which can be used as alignment layers. Therefore, liquid-crystal coumarin-containing pillar[5]arenes represent a significant addition to the family of LCMs and may become useful for the development of engineered, hierarchical structures and materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Quantification of Lipoprotein Uptake in Vivo Using Magnetic Particle Imaging and Spectroscopy

  • Hildebrand, S.
  • Löwa, N.
  • Paysen, H.
  • Fratila, R.M.
  • Reverte-Salisa, L.
  • Trakoolwilaiwan, T.
  • Niu, Z.
  • Kasparis, G.
  • Preuss, S.F.
  • Kosch, O.
  • De La Fuente, J.M.
  • Thanh, N.T.K.
  • Wiekhorst, F.
  • Pfeifer, A.
Lipids are a major source of energy for most tissues, and lipid uptake and storage is therefore crucial for energy homeostasis. So far, quantification of lipid uptake in vivo has primarily relied on radioactive isotope labeling, exposing human subjects or experimental animals to ionizing radiation. Here, we describe the quantification of in vivo uptake of chylomicrons, the primary carriers of dietary lipids, in metabolically active tissues using magnetic particle imaging (MPI) and magnetic particle spectroscopy (MPS). We show that loading artificial chylomicrons (ACM) with iron oxide nanoparticles (IONPs) enables rapid and highly sensitive post hoc detection of lipid uptake in situ using MPS. Importantly, by utilizing highly magnetic Zn-doped iron oxide nanoparticles (ZnMNPs), we generated ACM with MPI tracer properties superseding the current gold-standard, Resovist, enabling quantification of lipid uptake from whole-animal scans. We focused on brown adipose tissue (BAT), which dissipates heat and can consume a large part of nutrient lipids, as a model for tightly regulated and inducible lipid uptake. High BAT activity in humans correlates with leanness and improved cardiometabolic health. However, the lack of nonradioactive imaging techniques is an important hurdle for the development of BAT-centered therapies for metabolic diseases such as obesity and type 2 diabetes. Comparison of MPI measurements with iron quantification by inductively coupled plasma mass spectrometry revealed that MPI rivals the performance of this highly sensitive technique. Our results represent radioactivity-free quantification of lipid uptake in metabolically active tissues such as BAT.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nano-second laser interference photoembossed microstructures for enhanced cell alignment

  • Martinez, A.
  • González-Lana, S.
  • Asín, L.
  • Martínez de la Fuente, J.
  • Bastiaansen, C. W. M.
  • Broer, D. J.
  • Sánchez-Somolinos, C.
Photoembossing is a powerful photolithographic technique to prepare surface relief structures relying on polymerization-induced diffusion in a solventless development step. Conveniently, surface patterns are formed by two or more interfering laser beams without the need for a lithographic mask. The use of nanosecond pulsed light-based interference lithography strengthens the pattern resolution through the absence of vibrational line pattern distortions. Typically, a conventional photoembossing protocol consists of an exposure step at room temperature that is followed by a thermal development step at high temperature. In this work, we explore the possibility to perform the pulsed holographic exposure directly at the development temperature. The surface relief structures generated using this modified photoembossing protocol are compared with those generated using the conventional one. Importantly, the enhancement of surface relief height has been observed by exposing the samples directly at the development temperature, reaching approximately double relief heights when compared to samples obtained using the conventional protocol. Advantageously, the light dose needed to reach the optimum height and the amount of photoinitiator can be substantially reduced in this modified protocol, demonstrating it to be a more efficient process for surface relief generation in photopolymers. Kidney epithelial cell alignment studies on substrates with relief-height optimized structures generated using the two described protocols demonstrate improved cell alignment in samples generated with exposure directly at the development temperature, highlighting the relevance of the height enhancement reached by this method. Although cell alignment is well-known to be enhanced by increasing the relief height of the polymeric grating, our work demonstrates nano-second laser interference photoembossing as a powerful tool to easily prepare polymeric gratings with tunable topography in the range of interest for fundamental cell alignment studies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fate and transformation of silver nanoparticles in different biological conditions

  • Pem, B
  • Curlin, M
  • Jurasin, DD
  • Vrcek, V
  • Barbir, R
  • Micek, V
  • Fratila, RM
  • de la Fuente, JM
  • Vrcek, IV
The exploitation of silver nanoparticles (AgNPs) in biomedicine represents more than one third of their overall application. Despite their wide use and significant amount of scientific data on their effects on biological systems, detailed insight into their in vivo fate is still lacking. This study aimed to elucidate the biotransformation patterns of AgNPs following oral administration. Colloidal stability, biochemical transformation, dissolution, and degradation behaviour of different types of AgNPs were evaluated in systems modelled to represent biological environments relevant for oral administration, as well as in cell culture media and tissue compartments obtained from animal models. A multimethod approach was employed by implementing light scattering (dynamic and electrophoretic) techniques, spectroscopy (UV-vis, atomic absorption, nuclear magnetic resonance) and transmission electron microscopy. The obtained results demonstrated that AgNPs may transform very quickly during their journey through different biological conditions. They are able to degrade to an ionic form and again reconstruct to a nanoparticulate form, depending on the biological environment determined by specific body compartments. As suggested for other inorganic nanoparticles by other research groups, AgNPs fail to preserve their specific integrity in in vivo settings.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Photonic and magnetic materials for on-demand local drug delivery

  • Armenia, Ilaria
  • Cuestas Ayllón, Carlos
  • Torres Herrero, Beatriz
  • Bussolari, Francesca
  • Alfranca, Gabriel
  • Grazú, Valeria
  • Martínez de la Fuente, Jesús
Nanomedicine has been considered a promising tool for biomedical research and clinical practice in the 21st century because of the great impact nanomaterials could have on human health. The generation of new smart nanomaterials, which enable time- and space-controlled drug delivery, improve the limitations of conventional treatments, such as non-specific targeting, poor biodistribution and permeability. These smart nanomaterials can respond to internal biological stimuli (pH, enzyme expression and redox potential) and/or external stimuli (such as temperature, ultrasound, magnetic field and light) to further the precision of therapies. To this end, photonic and magnetic nanoparticles, such as gold, silver and iron oxide, have been used to increase sensitivity and responsiveness to external stimuli. In this review, we aim to report the main and most recent systems that involve photonic or magnetic nanomaterials for external stimulus-responsive drug release. The uniqueness of this review lies in highlighting the versatility of integrating these materials within different carriers. This leads to enhanced performance in terms of in vitro and in vivo efficacy, stability and toxicity. We also point out the current regulatory challenges for the translation of these systems from the bench to the bedside, as well as the yet unresolved matter regarding the standardization of these materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Melt electrowriting of liquid crystal elastomer scaffolds with programmed mechanical response

  • Javadzadeh, Mehrzad
  • del Barrio, Jesús
  • Sánchez-Somolinos, Carlos
Recently, significant advances have been achieved to precisely program the response of liquid crystal elastomers (LCEs) through extrusion-based additive manufacturing techniques; however, important challenges remain, especially when well-defined scaffolds based on ultrafine fibers are required. Here the melt electrowriting of reactive liquid crystalline inks, leading, after ultraviolet-light-induced crosslinking, to digitally positioned uniform LCE fibers with diameters ranging from hundreds of nanometers to tens of micrometers is presented, which is hardly accessible with conventional extrusion-based printing techniques. The electrowriting process induces the preferential alignment of the mesogens parallel to the fiber's axis. Such an alignment, defined by the printing path, determines the mechanical response of the crosslinked material upon stimulation. This manufacturing platform allows the preparation of open square lattice scaffolds with ultrafine fibers (a few micrometers in diameter), periods as small as 90 µm, and well-defined morphology. Additionally, the combination of accurate fiber stacking (up to 50 layers) and fiber fusion between layers leads to unprecedented microstructures composed of high-aspect-ratio LCE thin walls. The possibility of digitally controlling the printing of fibers allows the preparation complex fiber-based scaffolds with programmed and reversible shape-morphing, thus opening new avenues to prepare miniaturized actuators and smart structures for soft robotics and biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

From Bench to Cell: A Roadmap for Assessing the Bioorthogonal "Click" Reactivity of Magnetic Nanoparticles for Cell Surface Engineering

  • Idiago-Lopez, Javier
  • Moreno-Antolin, Eduardo
  • Eceiza, Maite
  • Aizpurua, Jesus M.
  • Grazu, Valeria
  • Martínez de la Fuente, Jesús
  • Fratila, Raluca M.
In this work, we report the use of bioorthogonal chemistry, specifically the strain-promoted click azide-alkyne cyclo-addition (SPAAC) for the covalent attachment of magnetic nano-particles (MNPs) on living cell membranes. Four types of MNPs were prepared, functionalized with two different stabilizing/passivation agents (a polyethylene glycol derivative and a glucopyranoside derivative, respectively) and two types of strained alkynes with different reactivities: a cyclooctyne (CO) derivative and a dibenzocyclooctyne (DBCO) derivative. The MNPs were extensively characterized in terms of physicochemical characteristics, colloidal stability, and click reactivity in suspension. Then, the reactivity of the MNPs toward azide-modified surfaces was evaluated as a closer approach to their final application in a living cell scenario. Finally, the DBCO-modified MNPs, showing superior reactivity in suspension and on surfaces, were selected for cell membrane immobilization via the SPAAC reaction on the membranes of cells engineered to express azide artificial reporters. Overall, our work provides useful insights into the appropriate surface engineering of nanoparticles to ensure a high performance in terms of bioorthogonal reactivity for biological applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Membrane-localized magnetic hyperthermia promotes intracellular delivery of cell-impermeant probes

  • Idiago-López, Javier
  • Ferreira, Daniela
  • Asín, Laura
  • Moros, María
  • Armenia, Ilaria
  • Grazú, Valeria
  • Fernandes, Alexandra R.
  • de la Fuente, Jesús M.
  • Baptista, Pedro V.
  • Fratila, Raluca M.
In this work, we report the disruptive use of membrane-localized magnetic hyperthermia to promote the internalization of cell-impermeant probes. Under an alternating magnetic field, magnetic nanoparticles (MNPs) immobilized on the cell membrane via bioorthogonal click chemistry act as nanoheaters and lead to the thermal disruption of the plasma membrane, which can be used for internalization of different types of molecules, such as small fluorescent probes and nucleic acids. Noteworthily, no cell death, oxidative stress and alterations of the cell cycle are detected after the thermal stimulus, although cells are able to sense and respond to the thermal stimulus through the expression of different types of heat shock proteins (HSPs). Finally, we demonstrate the utility of this approach for the transfection of cells with a small interference RNA (siRNA), revealing a similar efficacy to a standard transfection method based on the use of cationic lipid-based reagents (such as Lipofectamine), but with lower cell toxicity. These results open the possibility of developing new procedures for “opening and closing” cellular membranes with minimal disturbance of cellular integrity. This on-demand modification of cell membrane permeability could allow the direct intracellular delivery of biologically relevant (bio)molecules, drugs and nanomaterials, thus overcoming traditional endocytosis pathways and avoiding endosomal entrapment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Critical Parameters to Improve Pancreatic Cancer Treatment Using Magnetic Hyperthermia: Field Conditions, Immune Response, and Particle Biodistribution

  • Beola, L.
  • Grazu, V.
  • Fernandez-Afonso, Y.
  • Fratila, R.M.
  • De Las Heras, M.
  • De La Fuente, J.M.
  • Gutierrez, L.
  • Asin, L.
Magnetic hyperthermia (MH) was used to treat a murine model of pancreatic cancer. This type of cancer is generally characterized by the presence of dense stroma that acts as a barrier for chemotherapeutic treatments. Several alternating magnetic field (AMF) conditions were evaluated using three-dimensional (3D) cell culture models loaded with magnetic nanoparticles (MNPs) to determine which conditions were producing a strong effect on the cell viability. Once the optimal AMF conditions were selected, in vivo experiments were carried out using similar frequency and field amplitude parameters. A marker of the immune response activation, calreticulin (CALR), was evaluated in cells from a xenograft tumor model after the MH treatment. Moreover, the distribution of nanoparticles within the tumor tissue was assessed by histological analysis of tumor sections, observing that the exposure to the alternating magnetic field resulted in the migration of particles toward the inner parts of the tumor. Finally, a relationship between an inadequate body biodistribution of the particles after their intratumoral injection and a significant decrease in the effectiveness of the MH treatment was found. Animals in which most of the particles remained in the tumor area after injection showed higher reductions in the tumor volume growth in comparison with those animals in which part of the particles were found also in the liver and spleen. Therefore, our results point out several factors that should be considered to improve the treatment effectiveness of pancreatic cancer by magnetic hyperthermia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Selective Magnetic Nanoheating: Combining Iron Oxide Nanoparticles for Multi-Hot-Spot Induction and Sequential Regulation

  • Ovejero J.G.
  • Armenia I.
  • Serantes D.
  • Veintemillas-Verdaguer S.
  • Zeballos N.
  • López-Gallego F.
  • Grüttner C.
  • De La Fuente J.M.
  • Puerto Morales M.D.
  • Grazu V.
The contactless heating capacity of magnetic nanoparticles (MNPs) has been exploited in fields such as hyperthermia cancer therapy, catalysis, and enzymatic thermal regulation. Herein, we propose an advanced technology to generate multiple local temperatures in a single-pot reactor by exploiting the unique nanoheating features of iron oxide MNPs exposed to alternating magnetic fields (AMFs). The heating power of the MNPs depends on their magnetic features but also on the intensity and frequency conditions of the AMF. Using a mixture of diluted colloids of MNPs we were able to generate a multi-hot-spot reactor in which each population of MNPs can be selectively activated by adjusting the AMF conditions. The maximum temperature reached at the surface of each MNP was registered using independent fluorescent thermometers that mimic the molecular link between enzymes and MNPs. This technology paves the path for the implementation of a selective regulation of multienzymatic reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Nanoparticle-based biosensors for detection of extracellular vesicles in liquid biopsies

  • Martín-Gracia, B.
  • Martín-Barreiro, A.
  • Cuestas-Ayllón, C.
  • Grazú, V.
  • Line, A.
  • Llorente, A.
  • De La Fuente, J.M.
  • Moros, M.
Tumor-derived extracellular vesicles have emerged as an alternative source of cancer biomarkers in liquid biopsies. Despite their clinical potential, traditional methods for isolation and analysis have hampered their translation into the clinic. The use of nanomaterial-based biosensors can speed up the development of analytical methods for quantifying extracellular vesicles in a specific, highly reproducible, robust, fast and inexpensive way. Here we review the utility of extracellular vesicles as a novel type of liquid biopsies and the recent advances in nanoparticle-based biosensors for their analysis. We aim to emphasise the limitations and challenges that hinder extracellular vesicle analysis using these biosensors and point out potential solutions.