Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Photonic Interconnection Networks for Exascale Computers

  • Duro Gómez, José
[ES] En los últimos años, distintos proyectos alrededor del mundo se han centrado en el diseño de supercomputadores capaces de alcanzar la meta de la computación a exascala, con el objetivo de soportar la ejecución de aplicaciones de gran importancia para la sociedad en diversos campos como el de la salud, la inteligencia artificial, etc. Teniendo en cuenta la creciente tendencia de la potencia computacional en cada generación de supercomputadores, este objetivo se prevee accesible en los próximos años. Alcanzar esta meta requiere abordar diversos retos en el diseño y desarrollo del sistema. Uno de los principales es conseguir unas comunicaciones rápidas y eficientes entre el inmenso número de nodos de computo y los sitemas de memoria. La tecnología fotónica proporciona ciertas ventajas frente a las redes eléctricas, como un mayor ancho de banda en los enlaces, un mayor paralelismo a nivel de comunicaciones gracias al DWDM o una mejor gestión del cableado gracias a su reducido tamaño. En la tesis se ha desarrollado un estudio de viabilidad y desarrollo de redes de interconexión haciendo uso de la tecnología fotónica para los futuros sistemas a exaescala dentro del proyecto europeo ExaNeSt. En primer lugar, se ha realizado un análisis y caracterización de aplicaciones exaescala. Este análisis se ha utilizado para conocer el comportamiento y requisitos de red que presentan las aplicaciones, y con ello guiarnos en el diseño de la red del sistema. El análisis considera tres parámetros: la distribución de mensajes en base a su tamaño y su tipo, el consumo de ancho de banda requerido a lo largo de la ejecución y la matriz de comunicación espacial entre los nodos. El estudio revela la necesidad de una red eficiente y rápida, debido a que la mayoría de las comunaciones se realizan en burst y con mensajes de un tamaño medio inferior a 50KB. A continuación, la tesis se centra en identificar los principales elementos que diferencian las redes fotónicas de las eléctricas. Identificamos una secuencia de pasos en el diseño de un simulador, ya sea haciéndolo desde cero con tecnología fotónica o adaptando un simulador de redes eléctricas existente para modelar la fotónica. Después se han realizado dos estudios de rendimiento y comparativas entre las actuales redes eléctricas y distintas configuraciones de redes fotónicas utilizando topologías clásicas. En el primer estudio, realizado tanto con tráfico sintético como con trazas de ExaNeSt en un toro, fat tree y dragonfly, se observa como la tecnología fotónica supone una clara mejora respecto a la eléctrica. Además, el estudio muestra que el parámetro que más afecta al rendimiento es el ancho de banda del canal fotónico. El segundo estudio muestra el comportamiento y rendimiento de aplicaciones reales en simulaciones a gran escala en una topología jellyfish. En este estudio se confirman las conclusiones obtenidas en el anterior, revelando además que la tecnología fotónica permite reducir la complejidad de algunas topologías, y por ende, el coste de la red. En los estudios realizados se ha observado una baja utilización de la red debido a que las topologías utilizadas para redes eléctricas no aprovechan las características que proporciona la tecnología fotónica. Por ello, se ha propuesto Segment Switching, una estrategia de conmutación orientada a reducir la longitud de las rutas mediante el uso de buffers intermedios. Los resultados experimentales muestran que cada topología tiene sus propios requerimientos. En el caso del toro, el mayor rendimiento se obtiene con un mayor número de buffers en la red. En el fat tree el parámetro más importante es el tamaño del buffer, obteniendo unas prestaciones similares una configuración con buffers en todos los switches que la que los ubica solo en el nivel superior. En resumen, esta tesis estudia el uso de la tecnología fotónica para las redes de sistemas a exascala y propone aprovechar, [CA] Els darrers anys, múltiples projectes de recerca a tot el món s'han centrat en el disseny de superordinadors capaços d'assolir la barrera de computació exascala, amb l'objectiu de donar suport a l'execució d'aplicacions importants per a la nostra societat, com ara salut, intel·ligència artificial, meteorologia, etc. Segons la tendència creixent en la potència de càlcul en cada generació de superordinadors, es preveu assolir aquest objectiu en els propers anys. No obstant això, assolir aquest objectiu requereix abordar diferents reptes importants en el disseny i desenvolupament del sistema. Un dels principals és aconseguir comunicacions ràpides i eficients entre l'enorme nombre de nodes computacionals i els sistemes de memòria. La tecnologia fotònica proporciona diversos avantatges respecte a les xarxes elèctriques actuals, com ara un major ample de banda als enllaços, un major paral·lelisme de la xarxa gràcies a DWDM o una millor gestió del cable a causa de la seva mida molt més xicoteta. En la tesi, s'ha desenvolupat un estudi de viabilitat i desenvolupament de xarxes d'interconnexió mitjançant tecnologia fotònica per a futurs sistemes exascala dins del projecte europeu ExaNeSt. En primer lloc, s'ha dut a terme un estudi de caracterització d'aplicacions exascala dels requisits de xarxa. Els resultats de l'anàlisi ajuden a entendre els requisits de xarxa de les aplicacions exascale i, per tant, ens guien en el disseny de la xarxa del sistema. Aquesta anàlisi considera tres paràmetres principals: la distribució dels missatges en funció de la seva mida i tipus, el consum d'ample de banda requerit durant tota l'execució i els patrons de comunicació espacial entre els nodes. L'estudi revela la necessitat d'una xarxa d'interconnexió ràpida i eficient, ja que la majoria de comunicacions consisteixen en ràfegues de transmissions, cadascuna amb una mida mitjana de missatge de 50 KB. A continuació, la tesi se centra a identificar els principals elements que diferencien les xarxes fotòniques de les elèctriques. Identifiquem una seqüència de passos en el disseny i implementació d'un simulador: tractar la tecnologia fotònica des de zero o per ampliar un simulador de xarxa elèctrica existent per modelar la fotònica. Després, es presenten dos estudis principals de comparació de rendiment entre xarxes elèctriques i diferents configuracions de xarxes fotòniques mitjançant topologies clàssiques. En el primer estudi, realitzat tant amb trànsit sintètic com amb traces d'ExaNeSt en un toro, fat tree i dragonfly, vam trobar que la tecnologia fotònica representa una millora notable respecte a la tecnologia elèctrica. A més, l'estudi mostra que el paràmetre que més afecta el rendiment és l'amplada de banda del canal fotònic. Aquest darrer estudi analitza el rendiment d'aplicacions reals en simulacions a gran escala en una topologia jellyfish. Els resultats d'aquest estudi corroboren les conclusions obtingudes en l'anterior, revelant també que la tecnologia fotònica permet reduir la complexitat d'algunes topologies i, per tant, el cost de la xarxa. En els estudis anteriors ens adonem que la xarxa estava infrautilitzada principalment perquè les topologies estudiades per a xarxes elèctriques no aprofiten les característiques proporcionades per la tecnologia fotònica. Per aquest motiu, proposem Segment Switching, una estratègia de commutació destinada a reduir la longitud de les rutes mitjançant la implementació de memòries intermèdies en nodes intermedis al llarg de la ruta. Els resultats experimentals mostren que cadascuna de les topologies estudiades presenta diferents requisits de memòria intermèdia. Per al toro, com més gran siga el nombre de memòries intermèdies a la xarxa, major serà el rendiment. Per al fat tree, el paràmetre clau és la mida de la memòria intermèdia, aconseguint un rendiment similar tant amb una configuració amb memòria intermèdia en tots els co, [EN] In the last recent years, multiple research projects around the world have focused on the design of supercomputers able to reach the exascale computing barrier, with the aim of supporting the execution of important applications for our society, such as health, artificial intelligence, meteorology, etc. According to the growing trend in the computational power in each supercomputer generation, this objective is expected to be reached in the coming years. However, achieving this goal requires addressing distinct major challenges in the design and development of the system. One of the main ones is to achieve fast and efficient communications between the huge number of computational nodes and the memory systems. Photonics technology provides several advantages over current electrical networks, such as higher bandwidth in the links, greater network parallelism thanks to DWDM, or better cable management due to its much smaller size. In this thesis, a feasibility study and development of interconnection networks have been developed using photonics technology for future exascale systems within the European project ExaNeSt. First, a characterization study of exascale applications from the network requirements has been carried out. The results of the analysis help understand the network requirements of exascale applications, and thereby guide us in the design of the system network. This analysis considers three main parameters: the distribution of the messages based on their size and type, the required bandwidth consumption throughout the execution, and the spatial communication patterns between the nodes. The study reveals the need for a fast and efficient interconnection network, since most communications consist of bursts of transmissions, each with an average message size of 50 KB. Next, this dissertation concentrates on identifying the main elements that differentiate photonic networks from electrical ones. We identify a sequence of steps in the design and implementation of a simulator either i) dealing with photonic technology from scratch or ii) to extend an existing electrical network simulator in order to model photonics. After that, two main performance comparison studies between electrical networks and different configurations of photonic networks are presented using classical topologies. In the former study, carried out with both synthetic traffic and traces of ExaNeSt in a torus, fat tree and dragonfly, we found that photonic technology represents a noticeable improvement over electrical technology. Furthermore, the study shows that the parameter that most affects the performance is the bandwidth of the photonic channel. The latter study analyzes performance of real applications in large-scale simulations in a jellyfish topology. The results of this study corroborates the conclusions obtained in the previous, also revealing that photonic technology allows reducing the complexity of some topologies, and therefore, the cost of the network. In the previous studies we realize that the network was underutilized mainly because the studied topologies for electrical networks do not take advantage of the features provided by photonic technology. For this reason, we propose Segment Switching, a switching strategy aimed at reducing the length of the routes by implementing buffers at intermediate nodes along the path. Experimental results show that each of the studied topologies presents different buffering requirements. For the torus, the higher the number of buffers in the network, the higher the performance. For the fat tree, the key parameter is the buffer size, achieving similar performance a configuration with buffers on all switches that locating buffers only at the top level. In summary, this thesis studies the use of photonic technology for networks of exascale systems, and proposes to take advantage of the characteristics of this technology in current electrical network topologies., This thesis has been conceived from the work carried out by Polytechnic University of Valencia in the ExaNeSt European project
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On-chip wireless silicon photonics: From reconfigurable interconnects to lab-on-chip devices

  • García Meca, Carlos
  • Lechago-Buendia, Sergio
  • Brimont, Antoine Christian Jacques
  • Mas Gómez, Sara María
  • Sánchez Diana, Luis David
  • Sánchez Losilla, Nuria
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • Martí Sendra, Javier
[EN] Photonic integrated circuits are developing as key enabling components for high-performance computing and advanced network-on-chip, as well as other emerging technologies such as lab-on-chip sensors, with relevant applications in areas from medicine and biotechnology to aerospace. These demanding applications will require novel features, such as dynamically reconfigurable light pathways, obtained by properly harnessing on-chip optical radiation. In this paper, we introduce a broadband, high-directivity (>150), low-loss, and reconfigurable silicon photonics nanoantenna that fully enables on-chip radiation control. We propose the use of these nanoantennas as versatile building blocks to develop wireless (unguided) silicon photonic devices, which considerably enhance the range of achievable integrated photonic functionalities. As examples of applications, we demonstrate 160 Gbit·s-1 data transmission over mm-scale wireless interconnects, a compact low-crosstalk 12-port crossing, and electrically reconfigurable pathways via optical beam steering. Moreover, the realization of a flow micro-cytometer for particle characterization demonstrates the smart system integration potential of our approach as lab-on-chip devices., Funding from grant TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) is acknowledged. This work was also supported by project TEC2015-73581-JIN (AEI/FEDER, UE), the EU-funded projects FP7-ICT PHOXTROT (No.318240) and H2020-, the EU-funded H2020-FET-HPC EXANEST (No.671553) and the Generalitat Valenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34) CG-M acknowledges support from Generalitat Valenciana’s VALi+d postdoctoral program (exp. APOSTD/ 2014/044). We thank David Zurita for his help in the design of the data acquisition code for the sensing application.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Accurately Modeling a Photonic NoC in a Detailed CMP Simulation Framework

  • Puche Lara, José
  • Lechago Buendía, Sergio
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
Photonic interconnects are a promising solution for the so-called communication bottleneck in current Chip Multiprocessor (CMPs) architectures. This technology presents an inherent low-latency and power consumption almost independent of communication distance, which are really desirable features in future Networks on Chip for next CMPs generations. However, since nanophotonic technology is still growing and therefore in an immature state, current simulators of detailed systems may not provide accurate models of photonic components. In this context, non-representative results are obtained when unaccurate photonic models are assumed. This paper summarizes all of the components that conform a fully operative photonic NoC and presents their current state of the art. Moreover, we evaluate a realistic photonic network that consists of two photonic rings and a token-based arbitration mechanism and compare it against a non-realistic model. In addition, both realistic and non-realistic schemes are valuated under different configurations varying the number of wavelengths that photonic waveguides employ. The experimental results show that the non-realistic NoC presents up 6× network latency deviation with respect to the accurate model. This deviation is translated into a performance deviation higher than 10% in several applications studied, which demonstrates the importance of accurate models when simulating current technologies under development like nanophotonics. Finally, a power consumption model of the realistic photonic network is presented. The results show that the overall photonic network power consumption grows with the number of wavelengths per waveguide since the number of required modulators and receivers becomes higher. In this way, the proposed realistic photonic network, which employs only two wavelengths for arbitration and destination selection tasks, increases its power consumption up to 3%, so network designs with more complex arbitration mechanisms must take into account the impact of the number of wavelengths on the power consumption., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) and by Plan E funds under Grant TIN2015-66972-C5-1-R and the ExaNest project, funded by the European Union’s Horizon 2020 research andinnovation programme under grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Workload Characterization for Exascale Computing Networks

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[EN] Exascale computing is the next step in high performance computing provided by systems composed of millions of interconnected processing cores. In order to guide the design and implementation of such systems, multiple workload characterization studies and system performance evaluations are required. This paper provides a workload characterization study in the context of the European Project ExaNeSt, which focuses, among others, on developing the network technology required to implement future exascale systems. In this work, we characterize different ExaNeSt applications from the computer network perspective by analyzing the distribution of messages, the dynamic bandwidth consumption, and the spatial communication patterns among cores. The analysis highlights three main observations; i) message sizes are, in general, below 50 kB; ii) communication patterns are usually bursty; and iii) spatial communication among cores concentrate in hot spots for most applications. Taking into account these observations, one can conclude that in order to unclog congested network links, an exascale network must be designed to briefly support higher-than-average bandwidths in the vicinity of key network cores., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and Analysis of the Performance of Exascale Photonic Networks

  • Duro-Gómez, José
  • Pascual Pérez, José Antonio
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[EN] Photonics technology has become a promising and viable alternative for both on-chip and off-chip interconnection networks of future Exascale systems. Nevertheless, this technology is not mature enough yet in this context, so research efforts focusing on photonic networks are still required to achieve realistic suitable network implementations. In this regard, system-level photonic network simulators can help guide designers to assess the multiple design choices. Most current research is done on electrical network simulators, whose components work widely different from photonics components. In this work, we summarize and compare the working behavior of both technologies which includes the use of optical routers, wavelength-division multiplexing and circuit switching among others. After implementing them into a well-known simulation framework, an extensive simulation study has been carried out using realistic photonic network configurations with synthetic and realistic traffic. Experimental results show that, compared to electrical networks, optical networks can reduce the execution time of the studied real workloads in almost one order of magnitude. Our study also reveals that the photonic configuration highly impacts on the network performance, being the bandwidth per channel and the message length the most important parameters., This work was supported by the ExaNeSt project, funded by the European Union's Horizon 2020 Research and Innovation Program under grant 671553, and by the Spanish Ministerio de Economía y Competitividad (MINECO) and Plan E funds under grant TIN2015-66972-C5-1-R. Pascual was supported by a HiPEAC Collaboration Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Improving System Turnaround Time with Intel CAT by Identifying LLC Critical Applications

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Selfa, Vicent
[EN] Resource sharing is a major concern in current multicore processors. Among the shared system resources, the Last Level Cache (LLC) is one of the most critical, since destructive interference between applications accessing it implies more off-chip accesses to main memory, which incur long latencies that can severely impact the overall system performance. To help alleviate this issue, current processors implement huge LLCs, but even so, inter-application interference can harm the performance of a subset of the running applications when executing multiprogram workloads. For this reason, recent Intel processors feature Cache Allocation Technologies (CAT) to partition the cache and assign subsets of cache ways to groups of applications. This paper proposes the Critical-Aware (CA) LLC partitioning approach, which leverages CAT and improves the performance of multiprogram workloads, by identifying and protecting the applications whose performance is more damaged by LLC sharing. Experimental results show that CA improves turnaround time on average by 15%, and up to 40% compared to a baseline system without partitioning., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO) and Plan E funds, under grants TIN2015-66972-C5-1-R and TIN2017-92139-EXP. It was also supported by the ExaNest project, with funds from the European Union Horizon 2020 project, with grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterisation of on-chip wireless interconnects based on silicon nanoantennas via near-field scanning optical microscopy

  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
  • García Meca, Carlos
  • Lechago-Buendia, Sergio
[EN] Recently, a novel Photonic-Integrated Circuit (PIC) paradigm based on the use of a new kind of ultra-directive, lowloss, highly efficient and broadband silicon nanoantenna has enabled the first demonstration of an on-chip wireless interconnect, with potential applications in reconfigurable networks and lab-on-a-chip systems. Despite the fact that the far-field properties of these nanoantennas have been widely studied, their near-field behaviour stays unexplored. Here, the authors study this feature through scanning near-field optical microscopy (SNOM). For this purpose, the authors design and characterise an on-chip twoport wireless link using a tailored SNOM. The conducted near-field measurements will be useful to improve the design of these integrated photonic devices with potential impact on a variety of applications, from biosensing to optical communications., Funding support from the Spanish Ministry of Economy and Competiveness under grants TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) and TEC2015-73581-JIN PHUTURE (AEI/FEDER, UE), the EU-funded H2020-FET-HPC EXANEST (No. 671553) and the GeneralitatValenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34) are acknowledged. E.P.-C. acknowledges support from GeneralitatValenciana under Grant APOSTD/2016/025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Caracterización de Cargas para Redes de Computación Exascale

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[ES] La computación exascale es el siguiente paso en la computación de alto rendimiento proporcionada por sistemas compuestos por millones de núcleos de procesamiento interconectados. Para guiar el diseño e implementación de dichos sistemas, se requieren múltiples estudios de caracterización de carga de trabajo y evaluaciones del sistema. Este documento proporciona un estudio de caracterización de la carga de trabajo en el contexto del proyecto europeo ExaNeSt, que se centra, entre otros, en el desarrollo de la tecnologı́a de red necesaria para implementar futuros sistemas de exascale. En este trabajo, caracterizamos diferentes aplicaciones ExaNeSt desde la perspectiva de la red informática mediante el análisis de la distribución de mensajes por tamaño, el consumo de ancho de banda a lo largo de la ejecución y los patrones espaciales de comunicación entre los núcleos. El análisis destaca tres observaciones principales; i) los tamaños de los mensajes son, en general, inferiores a 50 kB; ii) los patrones de comunicación suelen ser de ráfaga; y iii) la comunicación espacial entre los núcleos se concentra en los puntos crı́ticos para la mayorı́a de las aplicaciones. Tomando en cuenta estas observaciones, uno puede concluir que para desbloquear enlaces de red congestionados, una red exascale debe diseñarse para soportar brevemente anchos de banda superiores a la media en las proximidaes de los núcleos claves de la red., Este trabajo fue apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención No. 671553, y por el Ministerio de Economía y Competitividad (MINECO) y fondos del Plan E bajo Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Modelado de una Red Fotónica para Computación Exascale

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
La mayoría de las investigaciones actuales se realizan en simuladores desarrollados para redes eléctricas, cuyos componentes difieren mucho de los componentes fotónicos. Además, la tecnología fotónica añade nuevos componentes que no están presentes en las redes eléctricas. Este artículo discute cómo se puede construir una herramienta de simulación de redes fotónicas a partir de un simulador de redes eléctricas. Se resume y compara el comportamiento de ambas tecnologías –eléctrica y fotónica– y se discuten las extensiones propuestas. Entre otros aspectos, las extensiones propuestas modelan routers ópticos, wavelength-division multiplexing, conmutación de circuitos y algoritmos de encaminamiento., Este trabajo ha sido apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención no 671553, y los fondos del Ministerio de Economía y Competitividad (MINECO) y el Plan E bajo la subvención TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Modeling a Photonic Network for Exascale Computing

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
Photonics technology has become a promising and viable alternative for both on-chip and off-chip computer networks of future Exascale systems. Nevertheless, this technology is not mature enough yet in this context, so research efforts focusing on photonic networks are still required to achieve realistic suitable network implementations. In this context, system-level photonic network simulators can help to guide designers to assess the multiple design choices. Most current research is done on electrical network simulators, whose components work widely different from photonics components. Moreover, photonics technology adds new components that are not present in electrical networks. This paper discusses how a photonics simulation tool can be built by extending an electrical simulation framework. We summarize and compare the working behavior of both technologies -electrical and photonics, and discuss the rationale behind the proposed extensions. Among others, the devised extensions model optical routers, wavelength-division multiplexing, circuit switching, and specific routing algorithms. This work is aimed to provide support to investigate off- chip optical networks in the context of the European Exascale System Interconnect and Storage project (ExaNeSt) project. The experiments presented in this paper study multiple realistic photonic networks configurations and have been performed with excerpts of real traces. Experimental results show that, compared to electrical networks, optical networks can reduce the execution time of the workload by several orders of magnitude. Our study reveals that future optical technologies presenting a 3.2 Tbps aggregate link bandwidth will not provide additional performance benefits over state-of-the-art 1.6 Tbps optical links across the studied workloads, but 1.6 Tbps network links are enough to achieve the highest optical performance on computer networks. Regarding the link configuration, the bandwidth per optical channel is the parameter with highest impact on the network delay and so on the execution time, while for a given optical bandwidth per channel the better strategy is to reduce the phit size., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Economía y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High signal-to-noise ratio ultra-compact lab-on-a-chip microflow cytometer enabled by silicon optical antennas

  • Lechago-Buendia, Sergio
  • García Meca, Carlos
  • Sánchez Losilla, Nuria
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
[EN] We experimentally demonstrate an all-silicon nanoantenna-based micro-optofluidic cytometer showing a combination of high signal-to-noise ratio (SNR) > 14 dB and ultra-compact size. Thanks to the ultra-high directivity of the antennas (>150), which enables a state-of-the-art sub-micron resolution, we are able to avoid the use of the bulky devices typically employed to collimate light on chip (such as lenses or fibers). The nm-scale antenna cross section allows a dramatic reduction of the optical system footprint, from the mm-scale of previous approaches to a few mu m(2), yielding a notable reduction in the fabrication costs. This scheme paves the way to ultra-compact lab-on-a-chip devices that may enable new applications with potential impact on all branches of biological and health science., Funding from grant TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) is acknowledged. C. G.-M. acknowledges support from project TEC2015-73581-JIN PHUTURE (AEI/FEDER, UE). This work was also supported by the EU-funded projects FP7-ICT PHOXTROT (No. 318240), the EU-funded H2020-FET-HPC EXANEST (No. 671553) and the Generalitat Valenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34).