Skip to main content

DETECCION DE TOXINAS Y AGENTES PATOGENOS MEDIANTE BIOSENSORES OPTICOS NANOMETRICOS PARA AMENAZAS NBQ

TEC2015-63838-C3-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

Label-free optical biosensing using low-cost electrospun polymeric nanofibers

  • Martínez Pérez, P.
  • Ponce Alcántara, S.
  • Murillo, Nieves
  • Pérez Márquez, Ana
  • Maudes, J.
  • Peraile, Inés
  • González López, L.
  • Gil García, M.
  • Lorenzo Lozano, P.
  • García Rupérez, J.
Polymeric nanofiber matrices are promising structures to develop biosensing devices due to their easy and affordable large-scale fabrication and their high surface-to-volume ratio. In this work, the suitability of a polyamide 6 nanofiber matrix for the development of a label-free and real-time Fabry–Pérot cavity-based optical biosensor was studied. For such aim, in-flow biofunctionalization of nanofibers with antibodies, bound through a protein A/G layer, and specific biodetection of 10 µg/mL bovine serum albumin (BSA) were carried out. Both processes were successfully monitored via reflectivity measurements in real-time without labels and their reproducibility was demonstrated when different polymeric nanofiber matrices from the same electrospinning batch were employed as transducers. These results demonstrate not only the suitability of correctly biofunctionalized polyamide 6 nanofiber matrices to be employed for real-time and label-free specific biodetection purposes, but also the potential of electrospinning technique to create affordable and easy-to-fabricate at large scale optical transducers with a reproducible performance., This research was supported by a co-financed action by the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencian Community 2014–2020, the Generalitat Valenciana through the PROMETEO project AVANTI/2019/123 and the grant PPC/2020/037, the Spanish government through the project TEC2015-63838-C3-OPTONANOSENS, Universitat Politècnica de València through grant PAID-01-17, and by the Basque government through the project µ4Industry, KK-2019/00101, from the ELKARTEK Program; With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On-chip wireless silicon photonics: From reconfigurable interconnects to lab-on-chip devices

  • García Meca, Carlos
  • Lechago-Buendia, Sergio
  • Brimont, Antoine Christian Jacques
  • Mas Gómez, Sara María
  • Sánchez Diana, Luis David
  • Sánchez Losilla, Nuria
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • Martí Sendra, Javier
[EN] Photonic integrated circuits are developing as key enabling components for high-performance computing and advanced network-on-chip, as well as other emerging technologies such as lab-on-chip sensors, with relevant applications in areas from medicine and biotechnology to aerospace. These demanding applications will require novel features, such as dynamically reconfigurable light pathways, obtained by properly harnessing on-chip optical radiation. In this paper, we introduce a broadband, high-directivity (>150), low-loss, and reconfigurable silicon photonics nanoantenna that fully enables on-chip radiation control. We propose the use of these nanoantennas as versatile building blocks to develop wireless (unguided) silicon photonic devices, which considerably enhance the range of achievable integrated photonic functionalities. As examples of applications, we demonstrate 160 Gbit·s-1 data transmission over mm-scale wireless interconnects, a compact low-crosstalk 12-port crossing, and electrically reconfigurable pathways via optical beam steering. Moreover, the realization of a flow micro-cytometer for particle characterization demonstrates the smart system integration potential of our approach as lab-on-chip devices., Funding from grant TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) is acknowledged. This work was also supported by project TEC2015-73581-JIN (AEI/FEDER, UE), the EU-funded projects FP7-ICT PHOXTROT (No.318240) and H2020-, the EU-funded H2020-FET-HPC EXANEST (No.671553) and the Generalitat Valenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34) CG-M acknowledges support from Generalitat Valenciana’s VALi+d postdoctoral program (exp. APOSTD/ 2014/044). We thank David Zurita for his help in the design of the data acquisition code for the sensing application.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sensitivity comparison of a self-standing porous silicon membrane under flow-through and flow-over conditionshttps://aplicat.upv.es/senia-app/edicion/mantArticuloBib.faces?p_idioma=v

  • Martín-Sánchez, David
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] An optical sensor based on a self-standing porous silicon (PS) membrane is presented. The sensor was created by electrochemically etching a heavily doped p-type silicon wafer with an organic electrolyte that contained dimethylformamide. After fabrication, a high-current density close to electropolishing was applied in order to allow the detachment from the substrate using a lift-off method. The PS membrane was integrated ina microfluidic cell for sensing purposes, and reflectance spectra were continuously obtained while the target substance was flowed. A comparison of the bulk sensitivity is achieved when flowing through and over the pores is reported. During the experiments,a maximum sensitivity of 770 nm/RIU measured at 1700 nm was achieved. Experimental sensitivity values are in good agreement with the theoretical calculations performed when flowing through the PS membrane, it means that the highest possible sensitivity of that sensor was achieved. In contrast, a drop in the sensi-tivity of around 25% was observed when flowing over the PS membrane., This work was supported by the Ministry of Economy and Competitiveness. The associate editor coordinating the review of this paper and approving it for publication was Prof. Aime Lay-Ekuakille.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study of subwavelength grating bimodal waveguides as ultrasensitive interferometric sensors

  • Torrijos-Morán, Luis
  • Griol Barres, Amadeu
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Over the recent years, subwavelength grating (SWG) structures have increasingly attracted attention in the area of evanescent-field photonic sensors. In this Letter, for the first time to the best of our knowledge, we demonstrate experimentally the real-time refractive index (RI) sensing using the SWG bimodal interferometric structures. Two different configurations are considered to compare the effect of the nonlinear phase shift, obtained between the two first transverse electromagnetic propagating modes, in the measured bulk sensitivity. Very high experimental values up to 2270 nm/RIU are reached, which perfectly match the numerical simulations and significantly enhance other existing SWG and spectralbased sensors. By measuring the spectral shift, the obtained experimental sensitivity does not depend on the sensor length. As a result, a highly sensitive and compact singlechannel interferometer is experimentally validated for refractive index sensing, thus opening new paths in the field of optical integrated sensors., European Commission (PHC-634013 PHOCNOSIS project); Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS project); Universitat Politecnica de Valencia (grant PAID 01-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Subwavelength grating bimodal waveguide for refractive index sensing

  • Torrijos-Morán, Luis
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Periodic subwavelength structures supporting two TE modes are presented as high performance sensors with bulk and surface sensitivities of 1375.5nm/RIU and 6.138nm/nm, respectively. A complete theoretical study is provided by numerical expressions and FDTD simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Commercial polycarbonate track-etched membranes as substrates for low-cost optical sensors

  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Porous materials have become one of the best options for the development of optical sensors, since they maximize the interaction between the optical field and the target substances, which boosts the sensitivity. In this work, we propose the use of a readily available mesoporous material for the development of such sensors: commercial polycarbonate track-etched membranes. In order to demonstrate their utility for this purpose, we firstly characterized their optical response in the near-infrared range. This response is an interference fringe pattern, characteristic of a Fabry¿Pérot interferometer, which is an optical device typically used for sensing purposes. Afterwards, several refractive index sensing experiments were performed by placing different concentrations of ethanol solution on the polycarbonate track-etched membranes. As a result, a sensitivity value of around 56 nm/RIU was obtained and the reusability of the substrate was demonstrated. These results pave the way for the development of optical porous sensors with such easily available mesoporous material., This research was funded by the Spanish Government through grant TEC2015-63838-C3-1-R-OPTONANOSENS and the Universitat Politecnica de Valencia through grants PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

High performance photonic biosensors based on periodic configurations

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
[EN] Periodic photonic configurations as photonic crystals (PhCs) and subwavelength grating (SWG) waveguides are gaining a renewed interest for the development of biosensing structures. By performing a proper design, these periodic configurations allow a significant sensitivity increase while keeping a compact footprint, what is achieved by exploiting concepts such as the slow-wave effect, the increase of the light-matter overlap or the interference of dispersion engineered modes., These results were achieved thanks to the funding received from the European Union (ICT-644242-SAPHELY, PHC634013-PHOCNOSIS and the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014¿2020), the Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS and PID2019-106965RB-C21-PHOLOW), the Generalitat Valenciana (AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037), the Universitat Politècnica de València (PAID-01-17, PAID-01-18 and OCUSENSOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coherent Control of a Plasmonic Nanoantenna Integrated on a Silicon Chip

  • Espinosa-Soria, Alba
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Illuminating a plasmonic nanoantenna by a se of coherent light beams should tremendously modify its scattering, absorption and polarization properties, thus, enabling all-optical dynamic manipulation. However, diffraction inherently makes coherent control of isolated subwavelength-sizecl nanoantennas highly challenging when Uninitiated from free-space. Here, we overcome this limitation by placing the nanoantenna at a subwavelength distance of the output facet of silicon, waveguides that provide monolithically defined paths for multibeam coherent illumination. Inspired by coherent perfect absorption (CPA) concepts, we demonstrate experimentally modulation of the nanoantenna scattering by more than 1 order of magnitude and of the on-chip transmfission by > 50% over a similar to 200 nm bandwidth at telecom wavelengths by changing the phase between two counter-directional coherent guided beams. Moreover, we demonstrate coherent synthesis of polarization of the radiated field by illuminating the nanoantenna from orthogonal waveguides. Our finding paves the way toward coherent manipulation of nanoantennas and all-optical processing without nonlinearities in art integrated platform., All the authors acknowledge support from the Spanish Ministry of Economy and Competiveness (MINECO): A.E.-S. under Grant BES-2015-073146, E.P.-C. under Grant FJCI-2015-27228, F.J.D.-F. under Grant TEC2015-63838-C3-1-R, and A.M. under Grants TEC2014-51902-C2-1-R and TEC2014-61906-EXP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study of a real-time and highly sensitive fiber-optic porous silicon temperature sensing probe

  • Caroselli, Raffaele
  • Martín-Sánchez, David
  • Prats-Quílez, Francisco
  • Torrijos-Morán, Luis
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] We report the development of a temperature sensing probe created as a result of the combination of an optical fiber and a porous silicon microcavity (PSMC). After determining the physical parameters of the PSMC to achieve the required porous sensing structure, it was fabricated by electrochemically etching a silicon wafer. A 1-mm(2) PSMC piece was attached to the tip of an optical fiber so that temperature variations can be monitored in real-time exactly on that point. First, the performance of the PSMC sensor probe was characterized in a stable environment as water, obtaining a sensitivity around 110 pm/degrees C and a resolution in the 10-4 degrees C range. Afterward, the temperature transmission dynamics in air environment were studied., This work was supported by the European Commission under Project H2020-644242 SAPHELY, in part by the Spanish Government under Project TEC2013-49987-EXP BIOGATE and Project TEC2015-63838-C3-1-R OPTONANOSENS, and in part by the Generalitat Valenciana under the Doctoral Scholarship under Grant GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Macropore Formation and Pore Morphology Characterization of Heavily Doped p-Type Porous Silicon

  • Martín-Sánchez, David
  • Martinez-Perez, Paula
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Tuning the pore diameter of porous silicon films is essential for some applications such as biosensing, where the pore size can be used for filtering analytes or to control the biofunctionalization of its walls. However, macropore (>50nm) formation on p-type silicon is not yet fully controlled due to its strong dependence on resistivity. Electrochemical etching of heavily doped p-type silicon usually forms micropores (<5nm), but it has been found that bigger sizes can be achieved by adding an organic solvent to the electrolyte. In this work, we compare the results obtained when adding dimethylformamide (DMF) and dimethylsulfoxide (DMSO) to the electrolyte as well as the effect of a post-treatment of the sample with potasium hydroxide (KOH) and sodium hydroxide (NaOH) for macropore formation in p-type silicon with resistivities between 0.001 and 10ohm· cm, achieving pore sizes from 5 to 100nm., The authors acknowledge the funding from the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simultaneous Refractive Index Sensing Using an Array of Suspended Porous Silicon Membranes

  • Martín-Sánchez, David
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] We propose a fast and cost-effective method for obtaining a miniaturized array-formatted sensor suitable for multiplexed detection. Our solution is based on the fabrication of multiple mu m-sized suspended porous silicon (PSi) membranes working as independent transducers. Our process can potentially integrate an array of up to 1000 sensing spots per cm(2). We also propose a simple and user-friendly optical platform to simultaneously interrogate each element of the array in real-time. The feasibility of this idea was proved performing several sensing experiments where we were able to detect refractive index (RI) variations with different transducers at the same time. An average experimental sensitivity of 685 nm/RIU (Refractive Index Unit) was achieved, with a theoretical limit of detection (LoD) of 2.10(-4) RIU. The analyzed sensing spots displayed similar behavior both in time and in magnitude. We believe that the high capabilities of the sensor presented in this work, along with the sensing mechanism, can be very useful for multi-parametric analysis and multi-target detection of biological samples., This work was supported in part by the Ministry of Economy and Competitiveness and Spanish National Research Council under Project TEC2015-63838-C3-1-R-OPTONANOSENS and in part by the Generalitat Valencia under Project AVANTI/2019/123.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterisation of on-chip wireless interconnects based on silicon nanoantennas via near-field scanning optical microscopy

  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
  • García Meca, Carlos
  • Lechago-Buendia, Sergio
[EN] Recently, a novel Photonic-Integrated Circuit (PIC) paradigm based on the use of a new kind of ultra-directive, lowloss, highly efficient and broadband silicon nanoantenna has enabled the first demonstration of an on-chip wireless interconnect, with potential applications in reconfigurable networks and lab-on-a-chip systems. Despite the fact that the far-field properties of these nanoantennas have been widely studied, their near-field behaviour stays unexplored. Here, the authors study this feature through scanning near-field optical microscopy (SNOM). For this purpose, the authors design and characterise an on-chip twoport wireless link using a tailored SNOM. The conducted near-field measurements will be useful to improve the design of these integrated photonic devices with potential impact on a variety of applications, from biosensing to optical communications., Funding support from the Spanish Ministry of Economy and Competiveness under grants TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) and TEC2015-73581-JIN PHUTURE (AEI/FEDER, UE), the EU-funded H2020-FET-HPC EXANEST (No. 671553) and the GeneralitatValenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34) are acknowledged. E.P.-C. acknowledges support from GeneralitatValenciana under Grant APOSTD/2016/025.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study of an evanescent-field biosensor based on 1D photonic bandgap structures

  • Sabek, Jad
  • Torrijos-Morán, Luis
  • Díaz-Betancor, Zeneida
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A photonic bandgap (PBG) biosensor has been developed for the label-free detection of proteins. As the sensing in this type of structures is governed by the interaction between the evanescent field going into the cladding and the target analytes, scanning near-field optical microscopy has been used to characterize the profile of that evanescent field. The study confirms the strong exponential decrease of the signal as it goes into the cladding. This means that biorecognition events must occur as close to the PBG structure surface as possible in order to obtain the maximum sensing response. Within this context, the PBG biosensor has been biofunctionalized with half-antibodies specific to bovine serum albumin (BSA) using a UV-induced immobilization procedure. The use of half-antibodies allows one to reduce the thickness of the biorecognition volume down to ca. 2.5 nm, thus leading to a higher interaction with the evanescent field, as well as a proper orientation of their binding sites towards the target sample. Then, the biofunctionalized PBG biosensor has been used to perform a direct and real-time detection of the target BSA antigen., This research was funded by the European Commission through the Horizon 2020 Programme (PHC-634013-PHOCNOSIS project) and by the Spanish Ministry of Economy and Competitiveness (TEC2015-63838-C3-1-R-OPTONANOSENS project and FJCI-2015-27228 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual Refractive Index and Viscosity Sensing Using Polymeric Nanofibers Optical Structures

  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Kovylina-Zabyako, Miroslavna
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Martín-Sánchez, David
  • Pérez-Márquez, Ana
  • Maudes, Jon
  • Murillo, Nieves
[EN] Porous materials have demonstrated to be ideal candidates for the creation of optical sensors with very high sensitivities. This is due both to the possibility of infiltrating the target substances into them and to their notable surfaceto-volume ratio that provides a larger biosensing area. Among porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative for the creation of low-cost and easy-to-produce high performance optical sensors, for example, based on Fabry-Pérot (FP) interferometers. However, the sensing performance of these polymeric NFs sensors is limited by the low refractive index contrast between the NFs porous structure and the target medium when performing in-liquid sensing experiments, which determines a very low amplitude of the FP interference fringes appearing in the spectrum. This problem has been solved with the deposition of a thin metal layer ( 3 nm) over the NFs sensing layer. We have successfully used these metal-coated FP NFs sensors to perform several real-time and in-flow refractive index sensing experiments. From these sensing experiments, we have also determined that the sponge-like structure of the NFs layer suffers an expansion/compression process that is dependent of the viscosity of the analyzed sample, what thus gives the possibility to perform a simultaneous dual sensing of refractive index and viscosity of a fluid., This work was supported by the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS and from the Basque government through the KK-2019/00101-mu 4FINDUSTRY.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imaging Cloaked Objects: Diffraction Tomography of Realistic Invisibility Devices

  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Martí Sendra, Javier
  • García Meca, Carlos
[EN] Invisibility cloaks have become one of the most outstanding developments among the wide range of applications in the field of metamaterials. So far, most efforts in invisibility science have been devoted to achieving practically realizable cloak designs and to improving the effectiveness of these devices in reducing their scattering cross-section (SCS), a scalar quantity accounting for the total electromagnetic energy scattered by an object. However, little attention has been paid to the opposite side of the technology: the development of more efficient techniques for the detection of invisibility devices. For instance, the SCS ignores the phase change introduced by the cloak, as well as the angular dependence of the incident and scattered waves. Here, a different path is proposed, which takes advantage of the smarter way in which diffraction tomography processes all this overlooked information to improve the efficiency in unveiling the presence of invisibility devices. This approach not only results in a considerable sensitivity enhancement in the detection of different kinds of cloaks based on both scattering cancellation and transformation optics, but also enables us to obtain images depicting the approximate shape and size of the cloak. The proposed method can be extended to the detection of sound cloaks., F.J.D.-F. acknowledges funding from project TEC2015-63838-C3-1-R OP-TONANOSENS (MINECO/FEDER, European Union) under grant FPI BES-2016-076818 and funding for open access charge: CRUE-Universitat Politecnia de Valencia. J. M. acknowledges funding from ICTS-2017-28-UPV-9 (FEDER EU, UPV), PROMETEO/2019/123 (Generalitat Valenciana) and INCONN/20210/10. The authors acknowledge grant PID2020-118855RB-I00 funded by MCIN/AEI/10.13039/501100011033. Correction added on February 10th, 2023: one funding source added.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical sensors based on polymeric nanofibers layers created by electrospinning

  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Martín-Sánchez, David
  • Pérez-Márquez, A.
  • Maudes, J.
  • Murillo, N.
[EN] Porous materials have become ideal candidates for the creation of optical sensors that are able to reach extremely high sensitivities, due to both the possibility to infiltrate the target substances on them and to their large surface-to-volume ratio. In this work, we present a new alternative for the creation of porous optical sensors based on the use of polymeric nanofibers (NFs) layers fabricated by electrospinning. Polyamide 6 (PA6) NFs layers with average diameters lower than 30 nm and high porosities have been used for the creation of Fabry-Perot optical sensing structures. which have shown an experimental sensitivity up to 1060 nm/R11.1 (refractive index unit). This high sensitivity, together with the low production cost and the possibility to be manufactured over large areas, make NFs-based structures a very promising candidate for the development of low-cost and high performance optical sensors. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, The Spanish government (TEC2015-63838-C3-1-R-OPTONANOSENS); Basque government (KK-2017/00089-u4F).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-Time and In-Flow Sensing Using a High Sensitivity Porous Silicon Microcavity-Based Sensor

  • Caroselli, Raffaele
  • Martín-Sánchez, David
  • Prats-Quílez, Francisco
  • Torrijos-Morán, Luis
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Porous silicon seems to be an appropriate material platform for the development of high-sensitivity and low-cost optical sensors, as their porous nature increases the interaction with the target substances, and their fabrication process is very simple and inexpensive. In this paper, we present the experimental development of a porous silicon microcavity sensor and its use for real-time in-flow sensing application. A high-sensitivity configuration was designed and then fabricated, by electrochemically etching a silicon wafer. Refractive index sensing experiments were realized by flowing several dilutions with decreasing refractive indices, and measuring the spectral shift in real-time. The porous silicon microcavity sensor showed a very linear response over a wide refractive index range, with a sensitivity around 1000 nm/refractive index unit (RIU), which allowed us to directly detect refractive index variations in the 10(-7) RIU range., Funding from Spanish government through grants TEC2015-63838-C3-1-R (MINECO/FEDER, UE) and TEC2013-49987-EXP BIOGATE, from the European Commission through the project H2020-644242 SAPHELY is acknowledged. Raffaele Caroselli also acknowledges the Generalitat Valenciana for funding his grant through the Doctoral Scholarship GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study of the sensitivity of a porous silicon ring resonator sensor using continuous in-flow measurements

  • Caroselli, Raffaele
  • Prats-Quílez, Francisco
  • Martín-Sánchez, David
  • Torrijos-Morán, Luis
  • Bandarenka, Hanna
  • Girel, Kseniya
  • Bondarenko, Vitaly
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A highly sensitive photonic sensor based on a porous silicon ring resonator was developed and experimentally characterized. The photonic sensing structure was fabricated by exploiting a porous silicon double layer, where the top layer of a low porosity was used to form photonic elements by e-beam lithography and the bottom layer of a high porosity was used to confine light in the vertical direction. The sensing performance of the ring resonator sensor based on porous silicon was compared for the different resonances within the analyzed wavelength range both for transverse-electric and transverse-magnetic polarizations. We determined that a sensitivity up to 439 nm/RIU for low refractive index changes can be achieved depending on the optical field distribution given by each resonance/polarization. (C) 2017 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Commission through the project H2020-644242 SAPHELY; Spanish government through the projects TEC2013-49987-EXP BIOGATE and TEC2015-63838-C3-1-R-OPTONANOSENS; Generalitat Valenciana through the Doctoral Scholarship GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stabilization of Polymeric Nanofibers Layers for Use as Real-Time and In-Flow Photonic Sensors

  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Martinez-Perez, Paula
  • Pérez-Márquez, Ana
  • Maudes, Jon
  • Murillo, Nieves
[EN] In order to increase the sensitivity of a sensor, the relationship between its volume and the surface available to be functionalized is of great importance. Accordingly, porous materials are becoming very relevant, because they have a notable surface-to-volume ratio. Moreover, they o er the possibility to infiltrate the target substances on them. Among other porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative to low-cost and easy-to-produce high-performance photonic sensors. However, experimental results show a spectrum drift when performing sensing measurements in real-time. That drift is responsible for a significant error when trying to determine the refractive index variation for a target solution,and, because of that, for the detection of the presence of certain analytes. In order to avoid that problem, different chemical and thermal treatments were studied. The best results were obtained for thermal steps at 190 ºC during times between 3 and 5 h. As a result, spectrum drifts lower than 5 pm/min and sensitivities of 518 nm/refractive index unit (RIU) in the visible range of the spectrum were achieved in different electrospun NFs sensors., This work was supported by the Spanish government through the project TEC2015-63838-C3-1-ROPTONANOSENS and from the Basque government through the project KK-2019/00101 -mu 4INDUSTRY.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High signal-to-noise ratio ultra-compact lab-on-a-chip microflow cytometer enabled by silicon optical antennas

  • Lechago-Buendia, Sergio
  • García Meca, Carlos
  • Sánchez Losilla, Nuria
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
[EN] We experimentally demonstrate an all-silicon nanoantenna-based micro-optofluidic cytometer showing a combination of high signal-to-noise ratio (SNR) > 14 dB and ultra-compact size. Thanks to the ultra-high directivity of the antennas (>150), which enables a state-of-the-art sub-micron resolution, we are able to avoid the use of the bulky devices typically employed to collimate light on chip (such as lenses or fibers). The nm-scale antenna cross section allows a dramatic reduction of the optical system footprint, from the mm-scale of previous approaches to a few mu m(2), yielding a notable reduction in the fabrication costs. This scheme paves the way to ultra-compact lab-on-a-chip devices that may enable new applications with potential impact on all branches of biological and health science., Funding from grant TEC2015-63838-C3-1-R OPTONANOSENS (MINECO/FEDER, UE) is acknowledged. C. G.-M. acknowledges support from project TEC2015-73581-JIN PHUTURE (AEI/FEDER, UE). This work was also supported by the EU-funded projects FP7-ICT PHOXTROT (No. 318240), the EU-funded H2020-FET-HPC EXANEST (No. 671553) and the Generalitat Valenciana's PROMETEO grant NANOMET PLUS (PROMETEO II/2014/34).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermo-optic coefficient of porous silicon in the infrared region and oxidation process at low temperatures

  • Martín-Sánchez, David
  • Kovylina-Zabyako, Miroslavna
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] In this work, a porous silicon nanostructure has been fabricated by electrochemical means and used as a thermal sensor. The thermo-optic effect in the near infrared region has been experimentally studied based on spectroscopy measurements. Values of the thermo-optic coefficient between 3.2 and 7.9·10¿5 K¿1 have been obtained, depending on the porosity, reaching a maximum thermal sensitivity of 91 ± 3 pm/°C during the experiments carried out with the fabricated samples. Additionally, the oxidation process of the sensor at temperatures below 500 K has been studied, showing that the growth of the silicon oxide was dependent on the characteristics of the porous layers. Based on the experimental results, a mathematical model was developed to estimate the evolution of the oxidation process as a function of porosity and thickness., The authors acknowledge the funding from the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Study of the Oriented Immobilization of Antibodies on Photonic Sensing Structures by Using Protein A as an Intermediate Layer

  • Caroselli, Raffaele
  • Garcia Castello, Javier
  • Escorihuela Fuentes, Jorge
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A proper antibody immobilization on a biosensor is a crucial step in order to obtain a high sensitivity to be able to detect low target analyte concentrations. In this paper, we present an experimental study of the immobilization process of antibodies as bioreceptors on a photonic ring resonator sensor. A protein A intermediate layer was created on the sensor surface in order to obtain an oriented immobilization of the antibodies, which enhances the interaction with the target antigens to be detected. The anti-bovine serum albumin (antiBSA)-bovine serum albumin (BSA) pair was used as a model for our study. An opto-fluidic setup was developed in order to flow the different reagents and, simultaneously, to monitor in real-time the spectral response of the photonic sensing structure. The antiBSA immobilization and the BSA detection, their repeatability, and specificity were studied in different conditions of the sensor surface. Finally, an experimental limit of detection for BSA recognition of only 1 ng/mL was obtained, Funding from Spanish government through grants TEC2015-63838-C3-1-R (MINECO/FEDER, UE), TEC2013-49987-EXP BIOGATE, and CTQ/2016/75749-R, and from the European Commission through project H2020-644242-SAPHELY is acknowledged. Raffaele Caroselli also acknowledges the Generalitat Valenciana for funding his grant through the doctoral scholarship GRISOLIAP/2014/109.