Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrasensitive bacterial sensing using a disposable all-in-one amperometric platform with self-noise cancellation

  • Aymerich, Joan
  • Ferrer-Vilanova, Amparo
  • Cisneros-Fernández, Jose
  • Escudé-Pujol, Roger
  • Guirado, Gonzalo
  • Terés, Lluís
  • Dei, Michele
  • Muñoz-Berbel, Xavier
  • Serra-Graells, Francesc
The early detection of very low bacterial concentrations is key to minimize the healthcare and safety issues associated with microbial infections, food poisoning or water pollution. In amperometric integrated circuits for electrochemical sensors, flicker noise is still the main bottleneck to achieve ultrasensitive detection with small footprint, cost-effective and ultra-low power instrumentation. Current strategies rely on autozeroing or chopper stabilization causing negative impacts on chip size and power consumption. This work presents a 27-μW potentiostatic-amperometric Delta-Sigma modulator able to cancel its own flicker noise and provide a 4-fold improvement in the limit of detection. The 2.3-mm2 all-in-one CMOS integrated circuit is glued to an inkjet-printed electrochemical sensor. Measurements show that the limit of detection is 15 pArms, the extended dynamic range reaches 110 dB and linearity is R2 = 0.998. The disposable device is able to detect, in less than 1h, live bacterial concentrations as low as 102 CFU/mL from a 50-μL droplet sample, which is equivalent to 5 microorganisms., This work has been partially funded by the Spanish Consejo Superior de Investigaciones Científicas (CSIC) under the project IP4SS-201650E19 and by the European Commission under the REA grant agreement no. 600388 (TECNIOspring programme). A.F.-V. and X.M.-B. also acknowledge the European Commission through the project PROTECT ( H2020-NMBP-PILOT-720851 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Smart bactericidal textile enabling in-situ visual assessment of antimicrobial activity

  • Ferrer-Vilanova, Amparo
  • Jimenez Ezenarro, Josune
  • Ivanova, Kristina
  • Calvo, Óscar
  • Perelshtein, Ilana
  • Gorni, Giulio
  • Reguera, Ana Cristina
  • Rodríguez-Rodríguez, Rosalía
  • Blanes, Maria
  • Vigués, Núria
  • Mas, Jordi
  • Gedanken, Aharon
  • Tzanov, Tzanko
  • Guirado, Gonzalo
  • Muñoz-Berbel, Xavier
13 pages, 6 figures, 1 table, Hospital fabrics and wound dressings with antibacterial properties are essential to minimize infection risks associated with bacterial colonization of textiles. A key challenge of these materials lies in the difficulty in assessing their functional lifespan. Integrating bacterial-sensing elements into smart textiles enables real-time and in-situ evaluation of antibacterial activity. However, this approach is often hindered by the reactivity between bactericidal and bacterial-sensing components, the limited stability and selectivity of the sensing probes, and high production costs. Here, we address these challenges by presenting a smart textile that simultaneously provides antibacterial activity and bacterial-sensing capacity using a layer-by-layer sonochemical deposition method. Prussian blue, a chromogenic bacterial-sensing probe, is integrated onto hospital-grade antibacterial fabrics containing copper oxide nanoparticles. When the biocidal fabric begins to lose its antimicrobial activity, live bacteria in the textile metabolically reduce Prussian blue nanoparticles, triggering a visible colour change. This approach offers several key advantages, such as: (i) the resulting textile retains antibacterial activity comparable to conventional copper oxide-based textiles (A value > 4 in both cases); (ii) it provides a direct and visible colour transition from blue to colourless (>20 % colour losses) when the antibacterial coating begins to lose effectiveness, enabling straightforward monitoring of antibacterial lifespan without external instruments or reagents; (iii) the co-immobilization enhances coating stability, nearly doubling the binding strength of copper oxide and Prussian blue compared to single-layer coatings; and (iv), the additional Prussian blue layer significantly reduces the material cytotoxicity, enhancing biocompatibility for safer use in healthcare settings. These innovations offer a scalable, cost-effective, and multifunctional solution for infection control. The smart textile not only prevents bacterial spread but also provides timely, visual indications of coating degradation, making it a promising tool for improving patient safety in hospitals and for minimizing infection risks in schools and other high-risk environments., This work was supported by the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). Some of these experiments were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2021024980). The authors thank the Ministerio de Ciencia e Innovacion of Spain for financial support through the project PID2019-106171RB-I00, FJC2020-044866- I/MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Innovative approaches for controlling clinically relevant biofilms: current trends and future prospects

  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Tzanov, Tzanko|||0000-0002-8568-1110
  • Hoyo Pérez, Javier|||0000-0002-9927-2465
  • Ramon Portés, Eva|||0000-0002-0786-2792
Bacteria that colonize and form biofilms on living tissues and medical devices are a global healthcare concern. They cause life threatening infections and are associated with increased mortality and morbidity in the hospitals. Although antibiotics have been successfully applied for treatment of bacterial diseases, the adaptive and genetic changes of the microorganisms within the biofilms make them inherently resistant to all known antibacterial agents. Therefore, novel antimicrobial strategies that do not exert selective pressure on bacterial population and minimize the risk of resistance occur- rence have been sought to prevent and treat biofilm related infections. A critical overview of the nu- merous groups and the rationale of advanced materials and surfaces with antibacterial and antibiofilm properties is the aim of this review. The development of antibiofilm coatings based on molecules in- terfering with bacterial cell-to-cell communication and biofilm integrity are discussed. Nano-scale transformation of obsolete antibiotics and surface functionalization with bacteriophages and natural antibacterials including enzymes, antimicrobial peptides, and polyphenols are also considered. Fi- nally, recent efforts to design new generation of integrated antibacterial materials are reported.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Smart bactericidal textile enabling in-situ visual assessment of antimicrobial activity

  • Ferrer Vilanova, Amparo
  • Jimenez Ezenarro, Josune
  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Calvo, Óscar
  • Perelshtein, Ilana
  • Gorni, Giulio
  • Reguera, Ana Cristina
  • Rodríguez Rodríguez, Rosalía
  • Blanes, Maria
  • Vigués Frantzen, Núria
  • Mas López, Jordi
  • Gedanken, Aharon
  • Tzanov, Tzanko|||0000-0002-8568-1110
  • Guirado, Gonzalo
  • Muñoz Berbel, Xavier
Hospital fabrics and wound dressings with antibacterial properties are essential to minimize infection risks associated with bacterial colonization of textiles. A key challenge of these materials lies in the difficulty in assessing their functional lifespan. Integrating bacterial-sensing elements into smart textiles enables real-time and in-situ evaluation of antibacterial activity. However, this approach is often hindered by the reactivity between bactericidal and bacterial-sensing components, the limited stability and selectivity of the sensing probes, and high production costs. Here, we address these challenges by presenting a smart textile that simultaneously provides antibacterial activity and bacterial-sensing capacity using a layer-by-layer sonochemical deposition method. Prussian blue, a chromogenic bacterial-sensing probe, is integrated onto hospital-grade antibacterial fabrics containing copper oxide nanoparticles. When the biocidal fabric begins to lose its antimicrobial activity, live bacteria in the textile metabolically reduce Prussian blue nanoparticles, triggering a visible colour change. This approach offers several key advantages, such as: (i) the resulting textile retains antibacterial activity comparable to conventional copper oxide-based textiles (A value > 4 in both cases); (ii) it provides a direct and visible colour transition from blue to colourless (>20 % colour losses) when the antibacterial coating begins to lose effectiveness, enabling straightforward monitoring of antibacterial lifespan without external instruments or reagents; (iii) the co-immobilization enhances coating stability, nearly doubling the binding strength of copper oxide and Prussian blue compared to single-layer coatings; and (iv), the additional Prussian blue layer significantly reduces the material cytotoxicity, enhancing biocompatibility for safer use in healthcare settings. These innovations offer a scalable, cost-effective, and multifunctional solution for infection control. The smart textile not only prevents bacterial spread but also provides timely, visual indications of coating degradation, making it a promising tool for improving patient safety in hospitals and for minimizing infection risks in schools and other high-risk environments, This work was supported by the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). Some of these experiments were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2021024980). The authors thank the Ministerio de Ciencia e Innovación of Spain for financial support through the project PID2019-106171RB-I00, FJC2020-044866-I/MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hyaluronic acid derivative molecular weight-dependent synthesis and antimicrobial effect of hybrid silver nanoparticles

  • Ferreres Cabanes, Guillem|||0000-0003-3138-8506
  • Pérez Rafael, Silvia|||0000-0001-9658-6090
  • Torrent Burgués, Juan|||0000-0002-4952-736X
  • Tzanov, Tzanko|||0000-0002-8568-1110
Silver nanoparticles (Ag NPs) appeared as promising antimicrobial candidates to face the development of antibiotic resistance. Although reported as toxic towards mammalian cells, their combination with biomolecules have shown reduced toxicity, while maintaining the antimicrobial function. Herein, hyaluronic acid (HA) with low (40 kDa), medium (200 and 600 kDa) and high (2 MDa) molecular weight (Mw) was modified with adipic acid dihydrazide (ADH) and used as reducing and capping agents to synthesise antimicrobial hybrid Ag NPs. The Mw of the polymer played a crucial role in the morphology, size and antibacterial activity of the Ag NPs. The 600 and 200 kDa HA-ADH-Ag NPs were able to reduce the Escherichia coli and Staphylococcus aureus concentration by more than 3 logs, while the 40 kDa NPs reached ~2 logs reduction. The 2 MDa HA-ADH failed to form homogenous NPs with strong bactericidal activity. A mechanistic study of the interaction with a model bacterial membrane using Langmuir isotherms confirmed the greater interaction between bacteria and higher Mw polymers and the effect of the NP’s morphology. The nanocomposites low toxicity to human skin cells was demonstrated in vitro, showing more than 90% cell viability after incubation with the NPs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Sonochemical synthesis and stabilization of concentrated antimicrobial silver-chitosan nanoparticle dispersions

  • Francesko, Antonio
  • Petkova, Petya
  • Mendoza Gómez, Ernesto|||0000-0002-6455-0875
  • Tzanov, Tzanko|||0000-0002-8568-1110
  • Cano Fossas, Marta
  • Fernandes, Margarita M.
This work reports on a green synthetic route to produce concentrated aqueous dispersions of silver nanoparticles (AgNP) employing high-intensity ultrasound (US) and chitosan (CS) as a non-toxic reducing agent for Ag1 salts and AgNP stabilizer. The sonication simultaneously boosted the synthesis and improved the stability of the AgNP, capping them with CS. Hybrid AgNP-CS antimicrobial dispersions, stable for at least 6 months, were synthesized in a simple single step process. The use of US allowed for applying relatively mild processing temperatures (608C) and reaction time between 30 min and 3 h to obtain concentrated disper- sions of AgNP that otherwise could not be obtained even after 72 h under mechanical stirring at the same reaction conditions. Upon sonication spherical AgNP-CS with a size between 60 and 100 nm were generated, in contrast to the average diameter of 200 nm of the particles obtained by stirring. The antibacterial efficiency of the AgNP-CS hybrids was evaluated against the medically relevant pathogens Staphylococcus aureus and Escherichia coli. The US-synthesized AgNP-CS showed more than 3-fold higher antibacterial activity compared to the particles obtained under stirring, due to their higher concentration and smaller size.
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Antimicrobial lightweight materials and components

  • Morena Gatius, Ángela Gala|||0000-0003-4470-8249
  • Ferreres Cabanes, Guillem|||0000-0003-3138-8506
  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Pérez Rafael, Silvia|||0000-0001-9658-6090
  • Tzanov, Tzanko|||0000-0002-8568-1110
Lightweight materials and components have gained remarkable scientific and technological importance in the recent times as the main drivers of innovation. They are finding widespread use across all industry sectors to reduce the production cost and enhance materials quality and functionality, while maintaining the strength of the final material. In particular, antimicrobial lightweight materials have been garnering increased interest for management of resistant pathogens that are mainly responsible for the food spoilage and the occurrence of severe foodborne and hospital acquired infections. Research initiatives have been devoted to engineering various innovative materials as nanoparticles, hydrogels, foams and surface coatings with improved antimicrobial properties. In this chapter we summarize the recent advances in development of antimicrobial nano-enabled lightweight solutions using polymers, biopolymers, and different types of highly effective than their bulk counterparts nanoparticles with low probability for resistance development, showing the way forward to limit the spread and emergence of antimicrobial resistance., This work was supported by the European project ReInvent - "Novel Products for Constrution and Automotive Industries Based on Bio Materials and Nature Fibers" (H2020-BIBI-JTI-2017, Grant Agreement number 792049) and the European project PROTECT - "Pre-commercial lines for the production of surface nanostructured antimicrobial and antibiofilm textiles, medical devices, and water treatment membranes" (H2020-720851). The autors would like to acknowledge the European Regional Development Fund (FEDER). A.G.M. would like to thank Generalitat the Catalunya for providing her the Ph.D. grant (2019FI_B 01004) and G.F. acknowledges Universitat Politècnica de Catalunya and Banco Santander for his Ph.D. grant (113 FPI-UPC 2018), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid chitosan-silver nanoparticles enzymatically-embedded on cork filter material for water disinfection

  • Garcia Peña, Lina Vanesa
  • Petkova, Petya
  • Margalef-Marti, Rosanna
  • Vives, Marc
  • Aguilar, Lorena
  • Gallegos, Angel
  • Francesko, Antonio
  • Perelshtein, Ilana
  • Gedanken, Aharon
  • Mendoza Gómez, Ernesto|||0000-0002-6455-0875
  • Casas-Zapata, Juan Carlos
  • Morató Farreras, Jordi|||0000-0003-2588-8846
  • Tzanov, Tzanko|||0000-0002-8568-1110
Microbial contamination remains a major challenge in supply of drinking water in developing regions, despite the continuous advances being made in water purification processes. The spread and transmission of pathogens due to consuming unsafe water culminate in waterborne diseases and increased number of deaths worldwide. Recently, the application of nanotechnology for water purification and in particular, the use of antibacterial nanoparticles (NPs) to control microbial contaminations, received considerable interest. In this study, antibacterial chitosan-silver NPs (CS/AgNPs) were enzymatically grafted on cork matrices to design a water purification point-of-use device. The antibacterial efficiency of the constructed filtering system was further evaluated against severely contaminated with Escherichia coli water (~107 CFU/mL). The system was tested in two operating filtration modes with varied water residence time. The antibacterial nanocomposite decreased the water bacterial contamination by 4 and 5 log CFU/mL when performing a series of continuous short disinfection cycles of 15 min residence time (Experiment I). Nevertheless, a complete bacteria removal was achieved only after increasing the water residence time in the filters up to 8 hours (Experiment II). Durability of the system was demonstrated via performing five disinfection cycles after which the hybrid CS/AgNPs still remained on the cork surface. Importantly, the antibacterial nanocomposite prevented the bacteria attachment and proliferation during all cycles of the disinfection process., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Interaction of silver-lignin nanoparticles with mammalian mimetic membranes

  • Hoyo Pérez, Javier|||0000-0002-9927-2465
  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Torrent Burgués, Juan|||0000-0002-4952-736X
  • Tzanov, Tzanko|||0000-0002-8568-1110
Silver nanoparticles (AgNPs) have broad spectrum antibacterial activity, but their toxicity to human cells has raised concerns related to their use as disinfectants or coatings of medically relevant surfaces. To address this issue, NPs comprising intrinsically bactericidal and biocompatible biopolymer and Ag with high antibacterial efficacy against common pathogens and compatibility to human cells have been engineered. However, the reason for their lower toxicity compared to AgNPs has not yet been elucidated. This work studies the in vitro interaction of AgLNPs with model mammalian membranes through two approaches: (i) Langmuir films and (ii) supported planar bilayers studied by quartz crystal microbalance and atomic force spectroscopy. These approaches elucidate the interactions of AgLNPs with the model membranes indicating a prominent effect of the bioresourced lignin to facilitate the binding of AgLNPs to the mammalian membrane, without penetrating through it. This study opens a new avenue for engineering of hybrid antimicrobial biopolymer – Ag or other metal NPs with improved bactericidal effect whereas maintaining good biocompatibility, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Lipid-lipid interactions of Escherichia coli mimetic inner membrane at human physiological temperature

  • Hoyo Pérez, Javier|||0000-0002-9927-2465
  • Torrent Burgués, Juan|||0000-0002-4952-736X
  • Tzanov, Tzanko|||0000-0002-8568-1110
The current strategies to eradicate bacteria require that the antimicrobial agent either penetrate or disrupt the bacterial membrane. In Escherichia coli (E.coli) as a model of Gram-negative strains, the antimicrobials have to cross two barriers – the outer and the inner membrane being the latter composed by ~ 77% phosphatidylethanolamine (PE), ~ 13% phosphatidylglycerol (PG) and ~ 10% cardiolipin (CL) lipids. Each one of these lipid families shares the same headgroup, but contains acyl chains with varying length and degree of unsaturation. Bacteria adapt their membrane lipid composition and metabolism in response to environmental signals, such as the temperature, resulting in different interactions with exogenous molecules, e.g. antibacterial agents. Herein, bacterial model membranes are prepared to evaluate the lipid-lipid interactions in Langmuir monolayers of binary mixtures at several molar ratios of PE and PG or CL at human physiological temperature (37°C). Both PE:PG and PE:CL monolayers were stable at 37°C and presented higher molecular areas (> 20 Å2/molecule) than at 23°C. However, these lipid mixtures presented liquid-expanded state and rigidity (inverse of the compressibility modulus ~ 90 mN/m) slightly lower than at 23°C. Such athermalicity at biologically relevant temperatures may favour the preservation of the biological functions of E.coli, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Lipid-lipid interactions of Escherichia coli mimetic inner membrane at human physiological temperature

  • Hoyo Pérez, Javier
  • Torrent Burgués, Juan
  • Tzanov, Tzanko
The current strategies to eradicate bacteria require that the antimicrobial agent either penetrate or disrupt the bacterial membrane. In Escherichia coli (E.coli) as a model of Gram-negative strains, the antimicrobials have to cross two barriers – the outer and the inner membrane being the latter composed by ~ 77% phosphatidylethanolamine (PE), ~ 13% phosphatidylglycerol (PG) and ~ 10% cardiolipin (CL) lipids. Each one of these lipid families shares the same headgroup, but contains acyl chains with varying length and degree of unsaturation. Bacteria adapt their membrane lipid composition and metabolism in response to environmental signals, such as the temperature, resulting in different interactions with exogenous molecules, e.g. antibacterial agents. Herein, bacterial model membranes are prepared to evaluate the lipid-lipid interactions in Langmuir monolayers of binary mixtures at several molar ratios of PE and PG or CL at human physiological temperature (37°C). Both PE:PG and PE:CL monolayers were stable at 37°C and presented higher molecular areas (> 20 Å2/molecule) than at 23°C. However, these lipid mixtures presented liquid-expanded state and rigidity (inverse of the compressibility modulus ~ 90 mN/m) slightly lower than at 23°C. Such athermalicity at biologically relevant temperatures may favour the preservation of the biological functions of E.coli, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid chitosan-silver nanoparticles enzymatically-embedded on cork filter material for water disinfection

  • Garcia Peña, Lina Vanesa
  • Petkova, Petya
  • Margalef-Marti, Rosanna
  • Vives, Marc
  • Aguilar, Lorena
  • Gallegos, Angel
  • Francesko, Antonio
  • Perelshtein, Ilana
  • Gedanken, Aharon
  • Mendoza Gómez, Ernesto
  • Casas-Zapata, Juan Carlos
  • Morató Farreras, Jordi
  • Tzanov, Tzanko
Microbial contamination remains a major challenge in supply of drinking water in developing regions, despite the continuous advances being made in water purification processes. The spread and transmission of pathogens due to consuming unsafe water culminate in waterborne diseases and increased number of deaths worldwide. Recently, the application of nanotechnology for water purification and in particular, the use of antibacterial nanoparticles (NPs) to control microbial contaminations, received considerable interest. In this study, antibacterial chitosan-silver NPs (CS/AgNPs) were enzymatically grafted on cork matrices to design a water purification point-of-use device. The antibacterial efficiency of the constructed filtering system was further evaluated against severely contaminated with Escherichia coli water (~107 CFU/mL). The system was tested in two operating filtration modes with varied water residence time. The antibacterial nanocomposite decreased the water bacterial contamination by 4 and 5 log CFU/mL when performing a series of continuous short disinfection cycles of 15 min residence time (Experiment I). Nevertheless, a complete bacteria removal was achieved only after increasing the water residence time in the filters up to 8 hours (Experiment II). Durability of the system was demonstrated via performing five disinfection cycles after which the hybrid CS/AgNPs still remained on the cork surface. Importantly, the antibacterial nanocomposite prevented the bacteria attachment and proliferation during all cycles of the disinfection process., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Antimicrobial lightweight materials and components

  • Morena Gatius, Ángela Gala
  • Ferreres Cabanes, Guillem
  • Ivanova, Kristina Dimitrova
  • Pérez Rafael, Silvia
  • Tzanov, Tzanko
Lightweight materials and components have gained remarkable scientific and technological importance in the recent times as the main drivers of innovation. They are finding widespread use across all industry sectors to reduce the production cost and enhance materials quality and functionality, while maintaining the strength of the final material. In particular, antimicrobial lightweight materials have been garnering increased interest for management of resistant pathogens that are mainly responsible for the food spoilage and the occurrence of severe foodborne and hospital acquired infections. Research initiatives have been devoted to engineering various innovative materials as nanoparticles, hydrogels, foams and surface coatings with improved antimicrobial properties. In this chapter we summarize the recent advances in development of antimicrobial nano-enabled lightweight solutions using polymers, biopolymers, and different types of highly effective than their bulk counterparts nanoparticles with low probability for resistance development, showing the way forward to limit the spread and emergence of antimicrobial resistance., This work was supported by the European project ReInvent - "Novel Products for Constrution and Automotive Industries Based on Bio Materials and Nature Fibers" (H2020-BIBI-JTI-2017, Grant Agreement number 792049) and the European project PROTECT - "Pre-commercial lines for the production of surface nanostructured antimicrobial and antibiofilm textiles, medical devices, and water treatment membranes" (H2020-720851). The autors would like to acknowledge the European Regional Development Fund (FEDER). A.G.M. would like to thank Generalitat the Catalunya for providing her the Ph.D. grant (2019FI_B 01004) and G.F. acknowledges Universitat Politècnica de Catalunya and Banco Santander for his Ph.D. grant (113 FPI-UPC 2018), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Innovative approaches for controlling clinically relevant biofilms: current trends and future prospects

  • Ivanova, Kristina Dimitrova
  • Tzanov, Tzanko
  • Hoyo Pérez, Javier
  • Ramon Portés, Eva
Bacteria that colonize and form biofilms on living tissues and medical devices are a global healthcare concern. They cause life threatening infections and are associated with increased mortality and morbidity in the hospitals. Although antibiotics have been successfully applied for treatment of bacterial diseases, the adaptive and genetic changes of the microorganisms within the biofilms make them inherently resistant to all known antibacterial agents. Therefore, novel antimicrobial strategies that do not exert selective pressure on bacterial population and minimize the risk of resistance occur- rence have been sought to prevent and treat biofilm related infections. A critical overview of the nu- merous groups and the rationale of advanced materials and surfaces with antibacterial and antibiofilm properties is the aim of this review. The development of antibiofilm coatings based on molecules in- terfering with bacterial cell-to-cell communication and biofilm integrity are discussed. Nano-scale transformation of obsolete antibiotics and surface functionalization with bacteriophages and natural antibacterials including enzymes, antimicrobial peptides, and polyphenols are also considered. Fi- nally, recent efforts to design new generation of integrated antibacterial materials are reported., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Interaction of silver-lignin nanoparticles with mammalian mimetic membranes

  • Hoyo Pérez, Javier
  • Ivanova, Kristina Dimitrova
  • Torrent Burgués, Juan
  • Tzanov, Tzanko
Silver nanoparticles (AgNPs) have broad spectrum antibacterial activity, but their toxicity to human cells has raised concerns related to their use as disinfectants or coatings of medically relevant surfaces. To address this issue, NPs comprising intrinsically bactericidal and biocompatible biopolymer and Ag with high antibacterial efficacy against common pathogens and compatibility to human cells have been engineered. However, the reason for their lower toxicity compared to AgNPs has not yet been elucidated. This work studies the in vitro interaction of AgLNPs with model mammalian membranes through two approaches: (i) Langmuir films and (ii) supported planar bilayers studied by quartz crystal microbalance and atomic force spectroscopy. These approaches elucidate the interactions of AgLNPs with the model membranes indicating a prominent effect of the bioresourced lignin to facilitate the binding of AgLNPs to the mammalian membrane, without penetrating through it. This study opens a new avenue for engineering of hybrid antimicrobial biopolymer – Ag or other metal NPs with improved bactericidal effect whereas maintaining good biocompatibility, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Sonochemical synthesis and stabilization of concentrated antimicrobial silver-chitosan nanoparticle dispersions

  • Francesko, Antonio
  • Petkova, Petya
  • Mendoza Gómez, Ernesto
  • Tzanov, Tzanko
  • Cano Fossas, Marta
  • Fernandes, Margarita M.
This work reports on a green synthetic route to produce concentrated aqueous dispersions of silver nanoparticles (AgNP) employing high-intensity ultrasound (US) and chitosan (CS) as a non-toxic reducing agent for Ag1 salts and AgNP stabilizer. The sonication simultaneously boosted the synthesis and improved the stability of the AgNP, capping them with CS. Hybrid AgNP-CS antimicrobial dispersions, stable for at least 6 months, were synthesized in a simple single step process. The use of US allowed for applying relatively mild processing temperatures (608C) and reaction time between 30 min and 3 h to obtain concentrated disper- sions of AgNP that otherwise could not be obtained even after 72 h under mechanical stirring at the same reaction conditions. Upon sonication spherical AgNP-CS with a size between 60 and 100 nm were generated, in contrast to the average diameter of 200 nm of the particles obtained by stirring. The antibacterial efficiency of the AgNP-CS hybrids was evaluated against the medically relevant pathogens Staphylococcus aureus and Escherichia coli. The US-synthesized AgNP-CS showed more than 3-fold higher antibacterial activity compared to the particles obtained under stirring, due to their higher concentration and smaller size., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Smart bactericidal textile enabling in-situ visual assessment of antimicrobial activity

  • Ferrer Vilanova, Amparo
  • Jimenez Ezenarro, Josune
  • Ivanova, Kristina Dimitrova
  • Calvo, Óscar
  • Perelshtein, Ilana
  • Gorni, Giulio
  • Reguera, Ana Cristina
  • Rodríguez Rodríguez, Rosalía
  • Blanes, Maria
  • Vigués Frantzen, Núria
  • Mas López, Jordi
  • Gedanken, Aharon
  • Tzanov, Tzanko
  • Guirado, Gonzalo
  • Muñoz Berbel, Xavier
Hospital fabrics and wound dressings with antibacterial properties are essential to minimize infection risks associated with bacterial colonization of textiles. A key challenge of these materials lies in the difficulty in assessing their functional lifespan. Integrating bacterial-sensing elements into smart textiles enables real-time and in-situ evaluation of antibacterial activity. However, this approach is often hindered by the reactivity between bactericidal and bacterial-sensing components, the limited stability and selectivity of the sensing probes, and high production costs. Here, we address these challenges by presenting a smart textile that simultaneously provides antibacterial activity and bacterial-sensing capacity using a layer-by-layer sonochemical deposition method. Prussian blue, a chromogenic bacterial-sensing probe, is integrated onto hospital-grade antibacterial fabrics containing copper oxide nanoparticles. When the biocidal fabric begins to lose its antimicrobial activity, live bacteria in the textile metabolically reduce Prussian blue nanoparticles, triggering a visible colour change. This approach offers several key advantages, such as: (i) the resulting textile retains antibacterial activity comparable to conventional copper oxide-based textiles (A value > 4 in both cases); (ii) it provides a direct and visible colour transition from blue to colourless (>20 % colour losses) when the antibacterial coating begins to lose effectiveness, enabling straightforward monitoring of antibacterial lifespan without external instruments or reagents; (iii) the co-immobilization enhances coating stability, nearly doubling the binding strength of copper oxide and Prussian blue compared to single-layer coatings; and (iv), the additional Prussian blue layer significantly reduces the material cytotoxicity, enhancing biocompatibility for safer use in healthcare settings. These innovations offer a scalable, cost-effective, and multifunctional solution for infection control. The smart textile not only prevents bacterial spread but also provides timely, visual indications of coating degradation, making it a promising tool for improving patient safety in hospitals and for minimizing infection risks in schools and other high-risk environments, This work was supported by the European Commission through the project PROTECT (H2020-NMBP-PILOT-720851). Some of these experiments were performed at the CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2021024980). The authors thank the Ministerio de Ciencia e Innovación of Spain for financial support through the project PID2019-106171RB-I00, FJC2020-044866-I/MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hyaluronic acid derivative molecular weight-dependent synthesis and antimicrobial effect of hybrid silver nanoparticles

  • Ferreres Cabanes, Guillem
  • Pérez Rafael, Silvia
  • Torrent Burgués, Juan
  • Tzanov, Tzanko
Silver nanoparticles (Ag NPs) appeared as promising antimicrobial candidates to face the development of antibiotic resistance. Although reported as toxic towards mammalian cells, their combination with biomolecules have shown reduced toxicity, while maintaining the antimicrobial function. Herein, hyaluronic acid (HA) with low (40 kDa), medium (200 and 600 kDa) and high (2 MDa) molecular weight (Mw) was modified with adipic acid dihydrazide (ADH) and used as reducing and capping agents to synthesise antimicrobial hybrid Ag NPs. The Mw of the polymer played a crucial role in the morphology, size and antibacterial activity of the Ag NPs. The 600 and 200 kDa HA-ADH-Ag NPs were able to reduce the Escherichia coli and Staphylococcus aureus concentration by more than 3 logs, while the 40 kDa NPs reached ~2 logs reduction. The 2 MDa HA-ADH failed to form homogenous NPs with strong bactericidal activity. A mechanistic study of the interaction with a model bacterial membrane using Langmuir isotherms confirmed the greater interaction between bacteria and higher Mw polymers and the effect of the NP’s morphology. The nanocomposites low toxicity to human skin cells was demonstrated in vitro, showing more than 90% cell viability after incubation with the NPs., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fast phage detection and quantification, An optical density-based approach

  • Rajnovic, Denis|||0000-0001-7891-103X
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Mas Gordi, Jordi|||0000-0002-1980-4522
Since 1959 with the proposal of Double Agar Layer (DAL) method for phage detection and quantification, many sophisticated methods have emerged meanwhile. However, many of them are either too complex/expensive or insensitive to replace routine utilization of DAL method in clinical, environmental and industrial environments. For that purpose, we have explored an alternative method for the detection and quantification of bacteriophages that fulfills the criteria of being rapid, simple and inexpensive. In this paper we have developed a method based on the analysis of optical density kinetics in bacterial cultures exposed to phage-containing samples. Although the decrease in optical density caused by cell lysis was one of the first observable consequences of the effect of viral infection in bacterial cultures, the potential of the method for the assessment of phage abundance has never been fully exploited. In this work we carry out a detailed study of optical density kinetics in phage-infected bacterial cultures, as a function of both, phage abundance and initial concentration of the host organisms. In total, 90 different combinations of bacteria/phage concentrations have been used. The data obtained provide valuable information about sensitivity ranges, duration of the assay, percentages of inhibition and type of lysing behavior for each phage concentration. The method described can detect, as few as 10 phage particles per assay volume after a phage incubation period of 3.5h. The duration of the assay can be shortened to 45min at the expense of losing sensitivity and increasing the limit of detection to 10 pfu/ ml. Despite using non-sophisticated technology, the method described has shown sensitivity and response time comparable to other high-end methods. The simplicity of the technology and of the analytical steps involved, make the system susceptible of miniaturization and automation for high-throughput applications which can be implemented in routine analysis in many environments.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochromogenic Detection of Live Bacteria Using Soluble and Insoluble Prussian Blue

  • Ferrer-Vilanova, Amparo|||0000-0002-4223-8442
  • Alonso, Yasmine
  • J. Ezenarro, Josune|||0000-0003-3456-3787
  • Santiago Malagon, Sara|||0000-0002-1206-1455
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Guirado, Gonzalo|||0000-0003-2128-7007
Microbial detection is crucial for the control and prevention of infectious diseases, being one of the leading causes of mortality worldwide. Among the techniques developed for bacterial detection, those based on metabolic indicators are progressively gaining interest due to their simplicity, adaptability, and, most importantly, their capacity to differentiate between live and dead bacteria. Prussian blue (PB) may act as a metabolic indicator, being reduced by bacterial metabolism, producing a visible color change from blue to colorless. This molecule can be present in two main forms, namely, the soluble and the insoluble, having different properties and structures. In the current work, the bacterial-sensing capacity of soluble and insoluble PB will be tested and compared both in suspensions as PB-NPs and after deposition on transparent indium tin oxide-poly(ethylene terephthalate) (ITO-PET) electrodes. In the presence of live bacteria, PB-NPs are metabolized and completely reduced to the Prussian white state in less than 10 h for soluble and insoluble forms. However, when electrodeposited on ITO-PET substrates, less than 1 h of incubation with bacteria is required for both forms, although the soluble one presents faster metabolic reduction kinetics. This study paves the way to the use of Prussian blue as a metabolic indicator for the early detection of bacterial infection in fields like microbial diagnostics, surface sterilization, food and beverage contamination, and environmental pollution, among others.