Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Antibacterial properties and mechanisms of action of sonoenzymatically synthesized lignin-based nanoparticles

  • Morena Gatius, Ángela Gala|||0000-0003-4470-8249
  • Bassegoda Puigdomenech, Arnau
  • Natan, Michal
  • Jacobi, Gila
  • Banin, Ehud
  • Tzanov, Tzanko|||0000-0002-8568-1110
In recent years, lignin has drawn increasing attention for different applications due to its intrinsic antibacterial and antioxidant properties, coupled with biodegradability and biocompatibility. However, chemical modification or combination with metals is usually required to increase its antimicrobial functionality and produce biobased added-value materials for applications wherein bacterial growth should be avoided, such as biomedical and food industries. In this work, a sonoenzymatic approach for the simultaneous functionalization and nanotransformation of lignin to prepare metal-free antibacterial phenolated lignin nanoparticles (PheLigNPs) is developed. The grafting of tannic acid, a natural phenolic compound, onto lignin was achieved by an environmentally friendly approach using laccase oxidation upon the application of high-intensity ultrasound to rearrange lignin into NPs. PheLigNPs presented higher antibacterial activity than nonfunctionalized LigNPs and phenolated lignin in the bulk form, indicating the contribution of both the phenolic content and the nanosize to the antibacterial activity. Studies on the antibacterial mode of action showed that bacteria in contact with the functionalized NPs presented decreased metabolic activity and high levels of reactive oxygen species (ROS). Moreover, PheLigNPs demonstrated affinity to the bacterial surface and the ability to cause membrane destabilization. Antimicrobial resistance studies showed that the NPs did not induce resistance in pathogenic bacteria, unlike traditional antibiotics., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Nanoparticle-driven self-assembling injectable hydrogels provide a multi-factorial approach for chronic wound treatment

  • Pérez Rafael, Silvia|||0000-0001-9658-6090
  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Stefanov, Ivaylo
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Todorova, Katerina
  • Dimitrov, Petar
  • Hinojosa Caballero, Dolores
  • Tzanov, Tzanko|||0000-0002-8568-1110
Chronic wounds represent a major health burden and drain on medical system. Efficient wound repair is only possible if the dressing materials target simultaneously multiple factors involved in wound chronicity, such as deleterious proteolytic and oxidative enzymes and high bacterial load. Here we develop multifunctional hydrogels for chronic wound management through self-assembling of thiolated hyaluronic acid (HA-SH) and bioactive silver-lignin nanoparticles (Ag@Lig NPs). Dynamic and reversible interactions between the polymer and Ag@Lig NPs yield hybrid nanocomposite hydrogels with shear thinning and self-healing properties, coupled to zero-order kinetics release of antimicrobial silver in response to infection-related hyaluronidase (HNase). The hydrogels inhibit the major enzymes myeloperoxidase (MPO) and matrix metalloproteinases (MMPs) responsible for wound chronicity in a patient’s wound exudate. Furthermore, the lignin-capped AgNPs provide the hydrogel with antioxidant properties and strong antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. The nanocomposite hydrogels are not toxic to human keratinocytes after 7 days of direct contact. Complete tissue remodeling and restoration of skin integrity is demonstrated in vivo in a diabetic mouse model. Hematological analysis reveals lack of wound inflammation due to bacterial infection or toxicity, confirming the potential of HA-SH/Ag@Lig NPs hydrogels for chronic wound management., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Capítulo o parte de un libro (BookPart)

Antimicrobial lightweight materials and components

  • Morena Gatius, Ángela Gala|||0000-0003-4470-8249
  • Ferreres Cabanes, Guillem|||0000-0003-3138-8506
  • Ivanova, Kristina Dimitrova|||0000-0001-9158-4088
  • Pérez Rafael, Silvia|||0000-0001-9658-6090
  • Tzanov, Tzanko|||0000-0002-8568-1110
Lightweight materials and components have gained remarkable scientific and technological importance in the recent times as the main drivers of innovation. They are finding widespread use across all industry sectors to reduce the production cost and enhance materials quality and functionality, while maintaining the strength of the final material. In particular, antimicrobial lightweight materials have been garnering increased interest for management of resistant pathogens that are mainly responsible for the food spoilage and the occurrence of severe foodborne and hospital acquired infections. Research initiatives have been devoted to engineering various innovative materials as nanoparticles, hydrogels, foams and surface coatings with improved antimicrobial properties. In this chapter we summarize the recent advances in development of antimicrobial nano-enabled lightweight solutions using polymers, biopolymers, and different types of highly effective than their bulk counterparts nanoparticles with low probability for resistance development, showing the way forward to limit the spread and emergence of antimicrobial resistance., This work was supported by the European project ReInvent - "Novel Products for Constrution and Automotive Industries Based on Bio Materials and Nature Fibers" (H2020-BIBI-JTI-2017, Grant Agreement number 792049) and the European project PROTECT - "Pre-commercial lines for the production of surface nanostructured antimicrobial and antibiofilm textiles, medical devices, and water treatment membranes" (H2020-720851). The autors would like to acknowledge the European Regional Development Fund (FEDER). A.G.M. would like to thank Generalitat the Catalunya for providing her the Ph.D. grant (2019FI_B 01004) and G.F. acknowledges Universitat Politècnica de Catalunya and Banco Santander for his Ph.D. grant (113 FPI-UPC 2018), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Hybrid tellurium-lignin nanoparticles with enhanced antibacterial properties

  • Morena Gatius, Ángela Gala|||0000-0003-4470-8249
  • Bassegoda Puigdomenech, Arnau
  • Hoyo Pérez, Javier|||0000-0002-9927-2465
  • Tzanov, Tzanko|||0000-0002-8568-1110
The surge of antibiotic-resistant bacteria is leading to the loss of antibiotic treatment effectiveness, resulting in prolonged infections and even death. Against this healthcare threat, antimicrobial nanoparticles that hamper the evolve of resistance mechanisms are promising alternatives to antibiotics. Herein, we used Kraft lignin, a poorly valorized polymer derived from plant biomass, to develop novel hybrid tellurium-lignin nanoparticles (TeLigNPs) as alternative antimicrobial agents. The sonochemically synthesized TeLigNPs are comprised of a lignin matrix with embedded Te clusters, revealing the role of lignin as both reducing agent and structural component. The hybrid NPs showed strong bactericidal effect against the Gram-negative Escherichia coli and Pseudomonas aeruginosa, achieving more than 5 log bacteria reduction, while only slightly inhibited the growth of the Gram-positive Staphylococcus aureus. Exposure of TeLigNPs to human cells did not cause morphological changes or reduction in cell viability. Studies on the antimicrobial mechanism of action demonstrated that the novel TeLigNPs were able to disturb bacterial model membranes and generate reactive oxygen species (ROS) in Gram-negative bacteria., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Rigid composite bio-based polyurethane foams: from synthesis to LCA analysis

  • Recupido, Federica
  • Lama, Giuseppe C.
  • Ammendola, Mario
  • De Lucca Bossa, Ferdinando
  • Minigher, Andrea
  • Campaner, Pietro
  • Morena Gatius, Ángela Gala|||0000-0003-4470-8249
  • Tzanov, Tzanko|||0000-0002-8568-1110
  • Ornelas, Mariana
  • Barros, Ana
  • Gomes, Filipa
  • Bouça, Veronica
  • Malagueiro, Regina
  • Sanchez, Monica
  • Martinez, Eva
  • Sorrentino, Luigi
  • Boggioni, Laura
  • Perucca, Massimo
  • Anegalla, Sridhar
  • Marzella, Roberta
  • Moimare, Pierluigi
  • Verdolotti, Letizia
Our current industrial ammonia cycle is far from being sustainable – while intense energy is required to produce ammonia – almost half of it ends up in wastewater treatment plants (WWTPs) where is finally transformed and lost. This work shows the application of flat sheet membrane distillation (MD) commercial modules for the ammonia recovery from WWTPs. First, optimized operating conditions – in terms of ammonia flux, specific thermal energy (STEC) and chemical demand – were investigated in the laboratory with a 2.3 m2 MD module. Second, optimized conditions were demonstrated in a pilot installation on site operating a 14.5 m2 MD module continuously (24/7) for three months. Results showed that MD is a robust, low-maintenance technology that can be operated at low temperature and corresponding STEC (i.e. 38 °C and 13.6 kWhth per kg1 NH3, respectively) and low pH (i.e. 8.7) for the recovery of 90% of the water-bound ammonia as an ammonium sulphate (AS) solution. The AS product reached a concentration of 5 g l-1 N–NH4, lower than conventional fertilizers, however given its high quality and volume reduction factor, it constitutes a potential fertilizer solution for local needs. The maximum AS permeate concentration was limited by the increasing water vapour flux due to a higher osmotic distillation effect and a minor ammonia flux decrease with increasing permeate concentration. Further research will focus on optimizing the module configuration to minimize water flux and overall system operation for increased heat recovery and open-loop operation., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Antibacterial properties and mechanisms of action of sonoenzymatically synthesized lignin-based nanoparticles

  • Morena Gatius, Ángela Gala
  • Bassegoda Puigdomenech, Arnau
  • Natan, Michal
  • Jacobi, Gila
  • Banin, Ehud
  • Tzanov, Tzanko
In recent years, lignin has drawn increasing attention for different applications due to its intrinsic antibacterial and antioxidant properties, coupled with biodegradability and biocompatibility. However, chemical modification or combination with metals is usually required to increase its antimicrobial functionality and produce biobased added-value materials for applications wherein bacterial growth should be avoided, such as biomedical and food industries. In this work, a sonoenzymatic approach for the simultaneous functionalization and nanotransformation of lignin to prepare metal-free antibacterial phenolated lignin nanoparticles (PheLigNPs) is developed. The grafting of tannic acid, a natural phenolic compound, onto lignin was achieved by an environmentally friendly approach using laccase oxidation upon the application of high-intensity ultrasound to rearrange lignin into NPs. PheLigNPs presented higher antibacterial activity than nonfunctionalized LigNPs and phenolated lignin in the bulk form, indicating the contribution of both the phenolic content and the nanosize to the antibacterial activity. Studies on the antibacterial mode of action showed that bacteria in contact with the functionalized NPs presented decreased metabolic activity and high levels of reactive oxygen species (ROS). Moreover, PheLigNPs demonstrated affinity to the bacterial surface and the ability to cause membrane destabilization. Antimicrobial resistance studies showed that the NPs did not induce resistance in pathogenic bacteria, unlike traditional antibiotics., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Nanoparticle-driven self-assembling injectable hydrogels provide a multi-factorial approach for chronic wound treatment

  • Pérez Rafael, Silvia
  • Ivanova, Kristina Dimitrova
  • Stefanov, Ivaylo
  • Puiggalí Bellalta, Jordi
  • Valle Mendoza, Luis Javier del
  • Todorova, Katerina
  • Dimitrov, Petar
  • Hinojosa Caballero, Dolores
  • Tzanov, Tzanko
Chronic wounds represent a major health burden and drain on medical system. Efficient wound repair is only possible if the dressing materials target simultaneously multiple factors involved in wound chronicity, such as deleterious proteolytic and oxidative enzymes and high bacterial load. Here we develop multifunctional hydrogels for chronic wound management through self-assembling of thiolated hyaluronic acid (HA-SH) and bioactive silver-lignin nanoparticles (Ag@Lig NPs). Dynamic and reversible interactions between the polymer and Ag@Lig NPs yield hybrid nanocomposite hydrogels with shear thinning and self-healing properties, coupled to zero-order kinetics release of antimicrobial silver in response to infection-related hyaluronidase (HNase). The hydrogels inhibit the major enzymes myeloperoxidase (MPO) and matrix metalloproteinases (MMPs) responsible for wound chronicity in a patient’s wound exudate. Furthermore, the lignin-capped AgNPs provide the hydrogel with antioxidant properties and strong antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. The nanocomposite hydrogels are not toxic to human keratinocytes after 7 days of direct contact. Complete tissue remodeling and restoration of skin integrity is demonstrated in vivo in a diabetic mouse model. Hematological analysis reveals lack of wound inflammation due to bacterial infection or toxicity, confirming the potential of HA-SH/Ag@Lig NPs hydrogels for chronic wound management., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Rigid composite bio-based polyurethane foams: from synthesis to LCA analysis

  • Recupido, Federica
  • Lama, Giuseppe C.
  • Ammendola, Mario
  • De Lucca Bossa, Ferdinando
  • Minigher, Andrea
  • Campaner, Pietro
  • Morena Gatius, Ángela Gala
  • Tzanov, Tzanko
  • Ornelas, Mariana
  • Barros, Ana
  • Gomes, Filipa
  • Bouça, Veronica
  • Malagueiro, Regina
  • Sanchez, Monica
  • Martinez, Eva
  • Sorrentino, Luigi
  • Boggioni, Laura
  • Perucca, Massimo
  • Anegalla, Sridhar
  • Marzella, Roberta
  • Moimare, Pierluigi
  • Verdolotti, Letizia
Our current industrial ammonia cycle is far from being sustainable – while intense energy is required to produce ammonia – almost half of it ends up in wastewater treatment plants (WWTPs) where is finally transformed and lost. This work shows the application of flat sheet membrane distillation (MD) commercial modules for the ammonia recovery from WWTPs. First, optimized operating conditions – in terms of ammonia flux, specific thermal energy (STEC) and chemical demand – were investigated in the laboratory with a 2.3 m2 MD module. Second, optimized conditions were demonstrated in a pilot installation on site operating a 14.5 m2 MD module continuously (24/7) for three months. Results showed that MD is a robust, low-maintenance technology that can be operated at low temperature and corresponding STEC (i.e. 38 °C and 13.6 kWhth per kg1 NH3, respectively) and low pH (i.e. 8.7) for the recovery of 90% of the water-bound ammonia as an ammonium sulphate (AS) solution. The AS product reached a concentration of 5 g l-1 N–NH4, lower than conventional fertilizers, however given its high quality and volume reduction factor, it constitutes a potential fertilizer solution for local needs. The maximum AS permeate concentration was limited by the increasing water vapour flux due to a higher osmotic distillation effect and a minor ammonia flux decrease with increasing permeate concentration. Further research will focus on optimizing the module configuration to minimize water flux and overall system operation for increased heat recovery and open-loop operation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication

Antimicrobial lightweight materials and components

  • Morena Gatius, Ángela Gala
  • Ferreres Cabanes, Guillem
  • Ivanova, Kristina Dimitrova
  • Pérez Rafael, Silvia
  • Tzanov, Tzanko
Lightweight materials and components have gained remarkable scientific and technological importance in the recent times as the main drivers of innovation. They are finding widespread use across all industry sectors to reduce the production cost and enhance materials quality and functionality, while maintaining the strength of the final material. In particular, antimicrobial lightweight materials have been garnering increased interest for management of resistant pathogens that are mainly responsible for the food spoilage and the occurrence of severe foodborne and hospital acquired infections. Research initiatives have been devoted to engineering various innovative materials as nanoparticles, hydrogels, foams and surface coatings with improved antimicrobial properties. In this chapter we summarize the recent advances in development of antimicrobial nano-enabled lightweight solutions using polymers, biopolymers, and different types of highly effective than their bulk counterparts nanoparticles with low probability for resistance development, showing the way forward to limit the spread and emergence of antimicrobial resistance., This work was supported by the European project ReInvent - "Novel Products for Constrution and Automotive Industries Based on Bio Materials and Nature Fibers" (H2020-BIBI-JTI-2017, Grant Agreement number 792049) and the European project PROTECT - "Pre-commercial lines for the production of surface nanostructured antimicrobial and antibiofilm textiles, medical devices, and water treatment membranes" (H2020-720851). The autors would like to acknowledge the European Regional Development Fund (FEDER). A.G.M. would like to thank Generalitat the Catalunya for providing her the Ph.D. grant (2019FI_B 01004) and G.F. acknowledges Universitat Politècnica de Catalunya and Banco Santander for his Ph.D. grant (113 FPI-UPC 2018), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid tellurium-lignin nanoparticles with enhanced antibacterial properties

  • Morena Gatius, Ángela Gala
  • Bassegoda Puigdomenech, Arnau
  • Hoyo Pérez, Javier
  • Tzanov, Tzanko
The surge of antibiotic-resistant bacteria is leading to the loss of antibiotic treatment effectiveness, resulting in prolonged infections and even death. Against this healthcare threat, antimicrobial nanoparticles that hamper the evolve of resistance mechanisms are promising alternatives to antibiotics. Herein, we used Kraft lignin, a poorly valorized polymer derived from plant biomass, to develop novel hybrid tellurium-lignin nanoparticles (TeLigNPs) as alternative antimicrobial agents. The sonochemically synthesized TeLigNPs are comprised of a lignin matrix with embedded Te clusters, revealing the role of lignin as both reducing agent and structural component. The hybrid NPs showed strong bactericidal effect against the Gram-negative Escherichia coli and Pseudomonas aeruginosa, achieving more than 5 log bacteria reduction, while only slightly inhibited the growth of the Gram-positive Staphylococcus aureus. Exposure of TeLigNPs to human cells did not cause morphological changes or reduction in cell viability. Studies on the antimicrobial mechanism of action demonstrated that the novel TeLigNPs were able to disturb bacterial model membranes and generate reactive oxygen species (ROS) in Gram-negative bacteria., Peer Reviewed, Postprint (published version)