Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Antibacterial Activity Testing Methods for Hydrophobic Patterned Surfaces

  • Pérez Gavilán, Ana
  • Vieira de Castro, Joana
  • Arana Salaverría, Ainara
  • Merino Álvarez, Santos
  • Retolaza, Aritz
  • Alves, Sofía A.
  • Francone, Achille
  • Kehagias, Nikolaos
  • Sotomayor Torres, Clivia Marfa
  • Cocina, Donato
  • Mortera, Renato
  • Crapanzano, Salvatore
  • Pelegrín, Carlos Javier
  • Garrigós, María Carmen
  • Jiménez Migallón, Alfonso
  • Galindo, Begoña
  • Araque, Mari Carmen
  • Dykeman, Donna
  • Neves, Nuno M.
  • Marimón Ortiz de Zarate, José María
One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to bethe best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces, The present study was carried out as part of a European project called “Antimicrobial FLEXible POLymers for its use in hospital environments” (FLEXPOL Grant agreement No. 721062) funded by Horizon 2020 Framework Programme for Research and Innovation (2014-2020). The objective of the FLEXPOL project was to develop a pilot line for the production of a cost effective antibacterial adhesive film for its use in hospitals
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Antibacterial activity testing methods for hydrophobic patterned surfaces

  • Perez-Gavilan, Ana
  • Vieira de Castro, Joana
  • Arana, Ainara
  • Merino, Santos
  • Retolaza, Aritz
  • Alves, Sofia A.
  • Francone, Achille
  • Kehagias, Nikolaos
  • Sotomayor-Torres, Clivia M.
  • Cocina, Donato
  • Mortera, Renato
  • Crapanzano, Salvatore
  • Pelegrín, Carlos Javier
  • Garrigós, María del Carmen
  • Jiménez, Alfonso
  • Galindo, Begoña
  • Araque, Mari Carmen
  • Dykeman, Donna
  • Neves, Nuno M.
  • Marimón, Jose Maria
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Pelegrín, Carlos Javier|||/items/ea5f57c7-11a4-4576-a514-209ba5857c42
One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to be the best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fabrication and replication of re-entrant structures by nanoimprint lithography methods

  • Kehagias, N.
  • Francone, Achille
  • Guttmann, Markus
  • Winkler, Frank
  • Fernández, Ariadna
  • Sotomayor Torres, C. M.
In this work, the authors present and demonstrate a simple method to fabricate and mass replicate re-entrant structures. The method consists of the direct imprinting of polymer mushroomlike microstructures produced by a combination of photolithography and nickel up-plating process. In particular, they have studied the conditions to generate highly robust mushroomlike topographies and their topographical impact on the replication process. They discuss all the imprinting conditions suitable to replicate such topographies using both ultraviolet light assisted nanoimprint lithography (UV-NIL) and thermal NIL methods in two polymer films, poly(methyl methacrylate) and polypropylene, and a hybrid (organic–inorganic) UV light curable photoresist, namely, Ormocomp. Re-entrant topographies have been widely studied for liquid/oil repelling and dry adhesive properties, whereas in their experiments, they have proved evidence for their amphiphobic potential., The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2013-0295) and the EU H2020 project NMBP-PILOT-2016-721062 (FLEXPOL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-line metrology for roll-to-roll UV assisted nanoimprint lithography using diffractometry

  • Kreuzer, Martin
  • Whitworth, Guy L.
  • Francone, Achille
  • Gomis-Bresco, J.
  • Kehagias, N.
  • Sotomayor Torres, C. M.
We describe and discuss the optical design of a diffractometer to carry out in-line quality control during roll-to-roll nanoimprinting. The tool measures diffractograms in reflection geometry, through an aspheric lens to gain fast, non-invasive information of any changes to the critical dimensions of target grating structures. A stepwise tapered linear grating with constant period was fabricated in order to detect the variation in grating linewidth through diffractometry. The minimum feature change detected was ∼40 nm to a precision of 10 nm. The diffractometer was then integrated with a roll-to-roll UV assisted nanoimprint lithography machine to gain dynamic measurements in situ., The authors acknowledge the financial support from the EU projects, FLEXPOL (No. H2020- NMBP-PILOT-2016-721062), FP7 QUANTIHEAT (No. FP7-NMP-2013-LARGE-7-604668), as well as the MINECO Project PHENTOM (No. FIS2015-70862-P). M.K. acknowledges financial support from the Deutsche Forschungsgemeinschaft (No. KR 4522/1-1). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant No. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Real-time optical dimensional metrology via diffractometry for nanofabrication

  • Whitworth, Guy L.
  • Francone, Achille
  • Sotomayor Torres, C. M.
  • Kehagias, N.
Surface patterning technologies represent a worldwide growing industry, creating smart surfaces and micro/nanoscale device. The advent of large-area, high-speed imprinting technologies has created an ever-growing need for rapid and non-destructive dimensional metrology techniques to keep pace with the speed of production. Here we present a new real-time optical scatterometry technique, applicable at the mesoscale when optical inspection produces multiple orders of diffraction. We validate this method by inspecting multiple silicon gratings with a variety of structural parameters. These measurements are cross-referenced with FIB, SEM and scanning stylus profilometry. Finally, we measure thermally imprinted structures as a function of imprinting temperature in order to demonstrate the method suitable for in-line quality control in nanoimprint lithography., The authors acknowledge the financial support from the EU project, FLEXPOL (No. H2020-NMBP-PILOT-2016-721062) and the project: Surface and interface reshaped phonon propagation and phonon coupling to photons (SIP). PGC2018-101743-B-I00 (MINECO). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and is supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Antibacterial activity testing methods for hydrophobic patterned surfaces

  • Pérez-Gavilán, Ana
  • Vieira de Castro, Joana
  • Arana, Ainara
  • Merino, Santiago
  • Retolaza, A.
  • Alves, Sofía A.
  • Francone, Achille
  • Kehagias, N.
  • Sotomayor Torres, C. M.
  • Cocina, Donato
  • Mortera, Renato
  • Crapanzano, Salvatore
  • Pelegrín, Carlos Javier
  • Garrigos, María Carmen
  • Jiménez, Alonso
  • Galindo, Begoña
  • Araque, Mari Carmen
  • Dykeman, Donna
  • Neves, Nuno M.
  • Marimón, José María
One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to be the best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces., The present study was carried out as part of a European project called “Antimicrobial FLEXible POLymers for its use in hospital environments” (FLEXPOL Grant agreement No. 721062) funded by Horizon 2020 Framework Programme for Research and Innovation (2014-2020). The objective of the FLEXPOL project was to develop a pilot line for the production of a cost effective antibacterial adhesive film for its use in hospitals.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of surface topography on the bacterial attachment to micro- and nano-patterned polymer films

  • Francone, Achille
  • Merino, Santos
  • Retolaza, A.
  • Ramiro, Jorge
  • Alves, Sofía A.
  • Vieira de Castro, Joana
  • Neves, Nuno M.
  • Arana, Ainara
  • Marimón, José María
  • Sotomayor Torres, C. M.
  • Kehagias, N.
The development of antimicrobial surfaces has become a high priority in recent times. There are two ongoing worldwide health crises: the COVID-19 pandemic provoked by the SARS-CoV-2 virus and the antibiotic-resistant diseases provoked by bacteria resistant to antibiotic-based treatments. The need for antimicrobial surfaces against bacteria and virus is a common factor to both crises. Most extended strategies to prevent bacterial associated infections rely on chemical based-approaches based on surface coatings or biocide encapsulated agents that release chemical agents. A critical limitation of these chemistry-based strategies is their limited effectiveness in time while grows the concerns about the long-term toxicity on human beings and environment pollution. An alternative strategy to prevent bacterial attachment consists in the introduction of physical modification to the surface. Pursuing this chemistry-independent strategy, we present a fabrication process of surface topographies [one-level (micro, nano) and hierarchical (micro+nano) structures] in polypropylene (PP) substrates and discuss how wettability, topography and patterns size influence on its antibacterial properties. Using nanoimprint lithography as patterning technique, we report as best results 82 and 86% reduction in the bacterial attachment of E. coli and S. aureus for hierarchically patterned samples compared to unpatterned reference surfaces. Furthermore, we benchmark the mechanical properties of the patterned PP surfaces against commercially available antimicrobial films and provide evidence for the patterned PP films to be suitable candidates for use as antibacterial functional surfaces in a hospital environment., This work is funded by the European Commission, under the project FLEXPOL (H2020-NMBPPILOT-2016-721062). The present study was carried out as part of a European project called “Antimicrobial FLEXible POLymers for its use in hospital environments” (FLEXPOL grant agreement No. 721062) funded by Horizon 2020 Framework Programme for Research and Innovation (2014-2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simulations of micro-sphere/shell 2D silica photonic crystals for radiative cooling

  • Whitworth, Guy L.
  • Jaramillo-Fernandez, Juliana
  • Pariente González, J. Ángel
  • García Fernández, Pedro David
  • Blanco Montes, Álvaro
  • López, Cefe
  • Sotomayor Torres, C. M.
Passive daytime radiative cooling has recently become an attractive approach to address the global energy demand associated with modern refrigeration technologies. One technique to increase the radiative cooling performance is to engineer the surface of a polar dielectric material to enhance its emittance atwavelengths in the atmospheric infrared transparency window (8-13 ìm) by outcoupling surface-phonon polaritons (SPhPs) into free-space. Here we present a theoretical investigation of new surface morphologies based upon self-assembled silica photonic crystals (PCs) using an in-house built rigorous coupled-wave analysis (RCWA) code. Simulations predict that silica micro-sphere PCs can reach up to 73 K below ambient temperature, when solar absorption and conductive/convective losses can be neglected. Micro-shell structures are studied to explore the direct outcoupling of the SPhP, resulting in near-unity emittance between 8 and 10 ìm. Additionally, the effect of material composition is explored by simulating soda-lime glass micro-shells, which, in turn, exhibit a temperature reduction of 61 K below ambient temperature. The RCWA code was compared to FTIR measurements of silica micro-spheres, self-assembled on microscope slides., Horizon 2020 Framework Programme (721062); H2020 Marie Skłodowska-Curie Actions (665919); Ministerio de Ciencia, Innovación y Universidades (PGC2018-101743-B-I00, RTI2018-093921-B-C41, SEV-2017-0706, RTI2018-093921-B-44, RyC-2015-18124, FPI programme); Centres de Recerca de Catalunya.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-line metrology for roll-to-roll UV assisted nanoimprint lithography using diffractometry

  • Kreuzer, Martin|||0000-0002-7305-5016
  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Francone, Achille|||0000-0001-7757-9901
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
We describe and discuss the optical design of a diffractometer to carry out in-line quality control during roll-to-roll nanoimprinting. The tool measures diffractograms in reflection geometry, through an aspheric lens to gain fast, non-invasive information of any changes to the critical dimensions of target grating structures. A stepwise tapered linear grating with constant period was fabricated in order to detect the variation in grating linewidth through diffractometry. The minimum feature change detected was ∼40 nm to a precision of 10 nm. The diffractometer was then integrated with a roll-to-roll UV assisted nanoimprint lithography machine to gain dynamic measurements in situ.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fabrication and replication of re-entrant structures by nanoimprint lithography methods

  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Francone, Achille|||0000-0001-7757-9901
  • Guttmann, Markus
  • Winkler, Frank
  • Fernández Estévez, Ariadna|||0000-0001-7559-2037
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
In this work, the authors present and demonstrate a simple method to fabricate and mass replicate re-entrant structures. The method consists of the direct imprinting of polymer mushroomlike microstructures produced by a combination of photolithography and nickel up-plating process. In particular, they have studied the conditions to generate highly robust mushroomlike topographies and their topographical impact on the replication process. They discuss all the imprinting conditions suitable to replicate such topographies using both ultraviolet light assisted nanoimprint lithography (UV-NIL) and thermal NIL methods in two polymer films, poly(methyl methacrylate) and polypropylene, and a hybrid (organic-inorganic) UV light curable photoresist, namely, Ormocomp. Re-entrant topographies have been widely studied for liquid/oil repelling and dry adhesive properties, whereas in their experiments, they have proved evidence for their amphiphobic potential.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Real-time optical dimensional metrology via diffractometry for nanofabrication

  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Francone, Achille|||0000-0001-7757-9901
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Kehagias, Nikolaos|||0000-0002-2698-383X
Surface patterning technologies represent a worldwide growing industry, creating smart surfaces and micro/nanoscale device. The advent of large-area, high-speed imprinting technologies has created an ever-growing need for rapid and non-destructive dimensional metrology techniques to keep pace with the speed of production. Here we present a new real-time optical scatterometry technique, applicable at the mesoscale when optical inspection produces multiple orders of diffraction. We validate this method by inspecting multiple silicon gratings with a variety of structural parameters. These measurements are cross-referenced with FIB, SEM and scanning stylus profilometry. Finally, we measure thermally imprinted structures as a function of imprinting temperature in order to demonstrate the method suitable for in-line quality control in nanoimprint lithography.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Antibacterial activity testing methods for hydrophobic patterned surfaces

  • Perez-Gavilan, Ana
  • Vieirra de Castro, Joana.|||0000-0002-9297-2207
  • Arana, Ainara
  • Merino, Santos
  • Retolaza, Aritz
  • Alves, Sofia A.
  • Francone, Achille|||0000-0001-7757-9901
  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Cocina, Donato
  • Mortera, Renato
  • Crapanzano, Salvatore
  • Pelegrín, Carlos Javier
  • Garrigos, María Carmen
  • Jiménez, Alfonso
  • Galindo, Begoña
  • Araque, Mari Carmen
  • Dykeman, Donna
  • Neves, Nuno M.|||0000-0003-3041-0687
  • Marimón, José María|||0000-0002-2787-7094
One strategy to decrease the incidence of hospital-acquired infections is to avoid the survival of pathogens in the environment by the development of surfaces with antimicrobial activity. To study the antibacterial behaviour of active surfaces, different approaches have been developed of which ISO 22916 is the standard. To assess the performance of different testing methodologies to analyse the antibacterial activity of hydrophobic surface patterned plastics as part of a Horizon 2020 European research project. Four different testing methods were used to study the antibacterial activity of a patterned film, including the ISO 22916 standard, the immersion method, the touch-transfer inoculation method, and the swab inoculation method, this latter developed specifically for this project. The non-realistic test conditions of the ISO 22916 standard showed this method to be non-appropriate in the study of hydrophobic patterned surfaces. The immersion method also showed no differences between patterned films and smooth controls due to the lack of attachment of testing bacteria on both surfaces. The antibacterial activity of films could be demonstrated by the touch-transfer and the swab inoculation methods, that more precisely mimicked the way of high-touch surfaces contamination, and showed to be the best methodologies to test the antibacterial activity of patterned hydrophobic surfaces. A new ISO standard would be desirable as the reference method to study the antibacterial behaviour of patterned surfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Simulations of micro-sphere/shell 2D silica photonic crystals for radiative cooling

  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Pariente, Jose Angel|||0000-0003-2649-9164
  • Garcia, Pedro David
  • Blanco, Alvaro|||0000-0002-0015-4873
  • Lopez, Cefe
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Passive daytime radiative cooling has recently become an attractive approach to address the global energy demand associated with modern refrigeration technologies. One technique to increase the radiative cooling performance is to engineer the surface of a polar dielectric material to enhance its emittance atwavelengths in the atmospheric infrared transparency window (8-13 ìm) by outcoupling surface-phonon polaritons (SPhPs) into free-space. Here we present a theoretical investigation of new surface morphologies based upon self-assembled silica photonic crystals (PCs) using an in-house built rigorous coupled-wave analysis (RCWA) code. Simulations predict that silica micro-sphere PCs can reach up to 73 K below ambient temperature, when solar absorption and conductive/convective losses can be neglected. Micro-shell structures are studied to explore the direct outcoupling of the SPhP, resulting in near-unity emittance between 8 and 10 ìm. Additionally, the effect of material composition is explored by simulating soda-lime glass micro-shells, which, in turn, exhibit a temperature reduction of 61 K below ambient temperature. The RCWA code was compared to FTIR measurements of silica micro-spheres, self-assembled on microscope slides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly-Scattering Cellulose-Based Films for Radiative Cooling

  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Yang, Han
  • Schertel, Lukas
  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Garcia, Pedro David
  • Vignolini, Silvia
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Passive radiative cooling (RC) enables the cooling of objects below ambient temperature during daytime without consuming energy, promising to be a game changer in terms of energy savings and CO2 reduction. However, so far most RC surfaces are obtained by energy-intensive nanofabrication processes or make use of unsustainable materials. These limitations are overcome by developing cellulose films with unprecedentedly low absorption of solar irradiance and strong mid-infrared (mid-IR) emittance. In particular, a cellulose-derivative (cellulose acetate) is exploited to produce porous scattering films of two different thicknesses, L ≈ 30 µm (thin) and L ≈ 300 µm (thick), making them adaptable to above and below-ambient cooling applications. The thin and thick films absorb only ≈5% of the solar irradiance, which represents a net cooling power gain of at least 17 W m-2, compared to state-of-the-art cellulose-based radiative-cooling materials. Field tests show that the films can reach up to ≈5 °C below ambient temperature, when solar absorption and conductive/convective losses are minimized. Under dryer conditions (water column = 1 mm), it is estimated that the films can reach average minimum temperatures of ≈7-8 °C below the ambient. The work presents an alternative cellulose-based material for efficient radiative cooling that is simple to fabricate, cost-efficient and avoids the use of polluting materials.