Skip to main content

DISORDER TO ENHANCE THE LIGHT-MATTER INTERACTION

RYC-2015-18124

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

All-optical radio-frequency modulation of Anderson-localized modes

  • Arregui, Guillermo
  • Navarro-Urrios, D.
  • Kehagias, N.
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
All-optical modulation of light relies on exploiting intrinsic material nonlinearities [V. R. Almeida et al., Nature 431, 1081 (2004)]. However, this optical control is rather challenging due to the weak dependence of the refractive index and absorption coefficients on the concentration of free carriers in standard semiconductors [R. A. Soref and B. R. Bennett, Proc. SPIE 704, 32 (1987)]. To overcome this limitation, resonant structures with high spatial and spectral confinement are carefully designed to enhance the stored electromagnetic energy, thereby requiring lower excitation power to achieve significant nonlinear effects [K. Nozaki et al., Nat. Photonics 4, 477 (2010)]. Small mode-volume and high-quality (Q)-factor cavities also offer an efficient coherent control of the light field and the targeted optical properties. Here, we report on optical resonances reaching Q∼105 induced by disorder on photonic/phononic-crystal waveguides. At relatively low excitation powers (below 1mW), these cavities exhibit nonlinear effects leading to periodic (up to ∼35 MHz) oscillations of their resonant wavelength. Our system represents a test bed to study the interplay between structural complexity and material nonlinearities and their impact on localization phenomena and introduces a different functionality to the toolset of disordered photonics., This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) via the Severo Ochoa Program (Grant No. SEV-2013-0295) and the project PHENTOM (Fis 2015-70862-P), as well as by the CERCA Programme/Generalitat de Catalunya, and by the European Commission in the form of the H2020 FET Open Project PHENOMEN (Grant No. 713450). G.A. is supported by a BIST Ph.D. Fellowship, and P.D.G. and D.N.-U. gratefully acknowledge support through the Ramon y Cajal fellowships No. RYC-2015-18124 and No. RYC-2014-15392, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anderson photon-phonon colocalization in certain random superlattices

  • Arregui, Guillermo
  • Lanzillotti-Kimura, Norberto Daniel
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
Fundamental observations in physics ranging from gravitational wave detection to laser cooling of a nanomechanical oscillator into its quantum ground state rely on the interaction between the optical and the mechanical degrees of freedom. A key parameter to engineer this interaction is the spatial overlap between the two fields, optimized in carefully designed resonators on a case-by-case basis. Disorder is an alternative strategy to confine light and sound at the nanoscale. However, it lacks an a priori mechanism guaranteeing a high degree of colocalization due to the inherently complex nature of the underlying interference processes. Here, we propose a way to address this challenge by using GaAs/AlAs vertical distributed Bragg reflectors with embedded geometrical disorder. Because of a remarkable coincidence in the physical parameters governing light and motion propagation in these two materials, the equations for both longitudinal acoustic waves and normal-incidence light become practically equivalent for excitations of the same wavelength. This guarantees spatial overlap between the electromagnetic and displacement fields of specific photon-phonon pairs, leading to strong light-matter interaction. In particular, a statistical enhancement in the vacuum optomechanical coupling rate, go, is found, making this system a promising candidate to explore Anderson localization of high frequency (∼20 GHz) phonons enabled by cavity optomechanics. The colocalization effect shown here unlocks the access to unexplored localization phenomena and the engineering of light-matter interactions mediated by Anderson-localized states., This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades (MICINN) via the Severo Ochoa Program (Grant No. SEV-2017-0706) and the project PHENTOM (Grant No. Fis 2015-70862-P) as well as by the Centres de Recerca de Catalunya (CERCA), and by the European Commission in the form of the H2020 FET open project PHENOMEN (Grant No. 713450). G. A. is supported by a Barcelona Institute of Science and Technology PhD fellowship, N. D. L. K. by the ERC Starting Grant Nanophennec (Grant No. 715939) and P. D. G. by a Ramon y Cajal fellowship (Grant No. RyC-2015-18124)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coherent generation and detection of acoustic phonons in topological nanocavities

  • Arregui, Guillermo
  • Ortíz, O.
  • Esmann, M.
  • Sotomayor Torres, C. M.
  • Gomez-Carbonell, Carmen
  • Mauguin, O.
  • Perrin, B.
  • Lemaître, Aristide
  • García Fernández, Pedro David
  • Lanzillotti-Kimura, Norberto Daniel
Inspired by concepts developed for fermionic systems in the framework of condensed matter physics, topology and topological states are recently being explored also in bosonic systems. Recently, some of these concepts have been successfully applied to acoustic phonons in nanoscale multilayered systems. The reported demonstration of confined topological phononic modes was based on Raman scattering spectroscopy [M. Esmann et al., Phys. Rev. B 97, 155422 (2018)], yet the resolution did not suffice to determine lifetimes and to identify other acoustic modes in the system. Here, we use time-resolved pump-probe measurements using an asynchronous optical sampling (ASOPS) technique to overcome these resolution limitations. By means of one-dimensional GaAs/AlAs distributed Bragg reflectors (DBRs) used as building blocks, we engineer high frequency (∼200 GHz) topological acoustic interface states. We are able to clearly distinguish confined topological states from stationary band edge modes. The generation/detection scheme reflects the symmetry of the modes directly through the selection rules, evidencing the topological nature of the measured confined state. These experiments enable a new tool in the study of the more complex topology-driven phonon dynamics such as phonon nonlinearities and optomechanical systems with simultaneous confinement of light and sound., This work was supported by the European Commission in the form of the H2020 FET Proactive project TOCHA (No. 824140). The authors acknowledge funding by the European Research Council Starting Grant No. 715939, Nanophennec; by the French RENATECH network, and through a public grant overseen by the ANR as part of the “Investissements d’Avenir” program (Labex NanoSaclay Grant No. ANR-10-LABX-0035). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and the project PHENTOM (Fis 2015-70862-P), as well as by the CERCA Programme/Generalitat de Catalunya, and by the European Commission in the form of the H2020 FET Open project PHENOMEN (No. 713450 to G.A.). G.A. was supported by a BIST Ph.D. fellowship and P.D.G. by a Ramon y Cajal Fellowship No. RyC-2015-18124. M.E. acknowledges funding from the German Research Foundation DFG (Forschungsstipendium ES 560/1-1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Self-Assembled 2D Thermofunctional Material for Radiative Cooling

  • Jaramillo-Fernandez, Juliana
  • Whitworth, Guy L.
  • Pariente González, J. Ángel
  • Blanco Montes, Álvaro
  • García Fernández, Pedro David
  • López, Cefe
  • Sotomayor Torres, C. M.
[EN] The regulation of temperature is a major energy-consuming process of humankind. Today, around 15% of the global-energy consumption is dedicated to refrigeration and this figure is predicted to triple by 2050, thus linking global warming and cooling needs in a worrying negative feedback-loop. Here, an inexpensive solution is proposed to this challenge based on a single layer of silica microspheres self-assembled on a soda-lime glass. This 2D crystal acts as a visibly translucent thermal-blackbody for above-ambient radiative cooling and can be used to improve the thermal performance of devices that undergo critical heating during operation. The temperature of a silicon wafer is found to be 14 K lower during daytime when covered with the thermal emitter, reaching an average temperature difference of 19 K when the structure is backed with a silver layer. In comparison, the soda-lime glass reference used in the measurements lowers the temperature of the silicon by just 5 K. The cooling power of this simple radiative cooler under direct sunlight is found to be 350 W m when applied to hot surfaces with relative temperatures of 50 K above the ambient. This is crucial to radiatively cool down devices, i.e., solar cells, where an increase in temperature has drastic effects on performance., The European Union’s Horizon 2020 research and innovation program under the Marie Sklodoswa-Curie grant agreement N 665919 supported J.J.-F. and funded this project. Moreover, the research received funds from the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant No. SEV-2017-0706), RTI2018-093921-B-C41 and RTI2018-093921-A-C44 (SMOOTH), as well as by the CERCA Program/Generalitat de Catalunya. P.D.G. was supported by a Ramon y Cajal fellowship nr. RyC-2015-18124. J.J
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantifying the robustness of topological slow light

  • Arregui, Guillermo
  • Gomis-Bresco, J.
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
The backscattering mean free path ξ, the average ballistic propagation length along a waveguide, quantifies the resistance of slow light against unwanted imperfections in the critical dimensions of the nanostructure. This figure of merit determines the crossover between acceptable slow-light transmission affected by minimal scattering losses and a strong backscattering-induced destructive interference when the waveguide length L exceeds ξ. Here, we calculate the backscattering mean free path for a topological photonic waveguide for a specific and determined amount of disorder and, equally relevant, for a fixed value of the group index ng which is the slowdown factor of the group velocity with respect to the speed of light in vacuum. These two figures of merit, ξ and ng, should be taken into account when quantifying the robustness of topological and conventional (nontopological) slow-light transport at the nanoscale. Otherwise, any claim on a better performance of topological guided light over a conventional one is not justified., This work was supported by the European Commission H2020 FET Proactive project TOCHA (No. 824140). The authors acknowledge funding by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2019-0706) and the Plan Nacional RTI2018-093921-A-C44 (SMOOTH) and CERCA Programme/Generalitat de Catalunya. G. A. was supported by a H2020 MSC cofund action, a BIST Ph.D. fellowship, and P. D. G. by a Ramon y Cajal Fellowship No. RyC-2015-18124., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Engineering nanoscale hypersonic phonon transport

  • Florez, Omar
  • Arregui, Guillermo
  • Albrechtsen, Marcus
  • Ng, Ryan C.
  • Gomis-Bresco, J.
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
Controlling vibrations in solids is crucial to tailor their elastic properties and interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, that is, a frequency range over which there are no available elastic waves. Here we demonstrate the complete absence of thermal vibrations in a nanostructured silicon membrane at room temperature over a broad spectral window, with a 5.3-GHz-wide bandgap centred at 8.4 GHz. By constructing a line-defect waveguide, we directly measure gigahertz guided modes without any external excitation using Brillouin light scattering spectroscopy. Our experimental results show that the shamrock crystal geometry can be used as an efficient platform for phonon manipulation with possible applications in optomechanics and signal processing transduction., This project has received funding from the European Union’s H2020 FET Proactive project TOCHA (No. 824140) and Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement (No. 754558). The ICN2 authors acknowledge funding from the Severo Ochoa programme from Spanish MINECO (No. SEV-2019-0706), Plan Nacional (RTI2018-093921-A-C44 - SMOOTH) and MCIN project SIP (PGC2018-101743-B-100), as well as by the CERCA Programme Generalitat de Catalunya. O.F. and G.A. are supported by BIST PhD Fellowships, R.C.N. by a Marie Sklodowska-Curie fellowship (No. 897148) and P.D.G. by a Ramon y Cajal fellowship (No. RyC-2015-18124). M.A. and S.S. gratefully acknowledge funding from the Villum Foundation Young Investigator Programme (No. 13170), the Danish National Research Foundation (No. DNRF147 – NanoPhoton), Innovation Fund Denmark (No. 0175-00022 – NEXUS) and Independent Research Fund Denmark (No. 0135-00315 – VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cavity Optomechanics with Anderson-Localized Optical Modes

  • Arregui, Guillermo
  • Ng, Ryan C.
  • Albrechtsen, Marcus
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
Confining photons in cavities enhances the interaction between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes estimated to be below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed g_{o}/2π∼200  kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our Letter constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with a multitude of mutually coupled degrees of freedom., This work was supported by the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant No. SEV-2017-0706) as well as by the CERCA Program/Generalitat de Catalunya and the EU-H2020 FET Proactive project TOCHA (No. 824140). G. A. was supported by the project RTI2018-093921-A-C44 (SMOOTH). R. C. N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska-Curie (Grant No. 897148). P. D. gratefully acknowledges the support of a Ramon y Cajal fellowship (RYC-2015-18124) and C. M. S. T. acknowledges the support of the national project SIP (Grant No. PGC2018-104333-BI00). M. A. and S. S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly-Scattering Cellulose-Based Films for Radiative Cooling

  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Yang, Han
  • Schertel, Lukas
  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Garcia, Pedro David
  • Vignolini, Silvia
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Passive radiative cooling (RC) enables the cooling of objects below ambient temperature during daytime without consuming energy, promising to be a game changer in terms of energy savings and CO2 reduction. However, so far most RC surfaces are obtained by energy-intensive nanofabrication processes or make use of unsustainable materials. These limitations are overcome by developing cellulose films with unprecedentedly low absorption of solar irradiance and strong mid-infrared (mid-IR) emittance. In particular, a cellulose-derivative (cellulose acetate) is exploited to produce porous scattering films of two different thicknesses, L ≈ 30 µm (thin) and L ≈ 300 µm (thick), making them adaptable to above and below-ambient cooling applications. The thin and thick films absorb only ≈5% of the solar irradiance, which represents a net cooling power gain of at least 17 W m-2, compared to state-of-the-art cellulose-based radiative-cooling materials. Field tests show that the films can reach up to ≈5 °C below ambient temperature, when solar absorption and conductive/convective losses are minimized. Under dryer conditions (water column = 1 mm), it is estimated that the films can reach average minimum temperatures of ≈7-8 °C below the ambient. The work presents an alternative cellulose-based material for efficient radiative cooling that is simple to fabricate, cost-efficient and avoids the use of polluting materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo preliminar (WorkingPaper)

Engineering nanoscale hypersonic phonon transport

  • Florez, Omar|||0000-0001-6662-9811
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Albrechtsen, Marcus|||0000-0003-4226-0997
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Stobbe, Søren|||0000-0002-0991-041X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • García Fernández, Pedro David|||0000-0002-3422-178X
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mechanical modes. Here, we demonstrate the complete absence of mechanical vibrations at room temperature over a broad spectral window, with a 5.3 GHz wide band gap centered at 8.4 GHz in a patterned silicon nanostructure membrane measured using Brillouin light scattering spectroscopy. By constructing a line-defect waveguide, we directly measure GHz localized modes at room temperature. Our experimental results of thermally excited guided mechanical modes at GHz frequencies provides an eficient platform for photon-phonon integration with applications in optomechanics and signal processing transduction.