Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Far-Field Radiative Thermal Rectification Based on Asymmetric Emissivity

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Spectroscopic and thermal characterization of extra virgin olive oil adulterated with edible oils

  • Chavez Angel, Emigdio
  • Puertas, Blanca
  • Kreuzer, Martin
  • Soliva-Fortuny, Robert
  • Ng, Ryan C.
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, Clivia M.
he substitution of extra virgin olive oil with other edible oils is the primary method forfraud in the olive-oil industry. Developing inexpensive analytical methods for confirming the qualityand authenticity of olive oils is a major strategy towards combatting food fraud. Current methodsused to detect such adulterations require complicated time- and resource-intensive preparation steps.In this work, a comparative study incorporating Raman and infrared spectroscopies, photolumines-cence, and thermal-conductivity measurements of different sets of adulterated olive oils is presented.The potential of each characterization technique to detect traces of adulteration in extra virgin oliveoils is evaluated. Concentrations of adulterant on the order of 5% can be detected in the Raman,infrared, and photoluminescence spectra. Small changes in thermal conductivity were also foundfor varying amounts of adulterants. While each of these techniques may individually be unableto identify impurity adulterants, the combination of these techniques together provides a holisticapproach to validate the purity and authenticity of olive oils., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). A.C.-A. acknowledges the support from Fondecyt Iniciacion 11200620. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Fellowship (Grant No. 897148).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spectroscopic and Thermal Characterization of Extra Virgin Olive Oil Adulterated with Edible Oils

  • Chávez-Angel, Emigdio
  • Puertas, Belén
  • Kreuzer, Martin
  • Soliva Fortuny, Robert
  • Ng, Ryan C.
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
The substitution of extra virgin olive oil with other edible oils is the primary method for fraud in the olive-oil industry. Developing inexpensive analytical methods for confirming the quality and authenticity of olive oils is a major strategy towards combatting food fraud. Current methods used to detect such adulterations require complicated time- and resource-intensive preparation steps. In this work, a comparative study incorporating Raman and infrared spectroscopies, photoluminescence, and thermal-conductivity measurements of different sets of adulterated olive oils is presented. The potential of each characterization technique to detect traces of adulteration in extra virgin olive oils is evaluated. Concentrations of adulterant on the order of 5% can be detected in the Raman, infrared, and photoluminescence spectra. Small changes in thermal conductivity were also found for varying amounts of adulterants. While each of these techniques may individually be unable to identify impurity adulterants, the combination of these techniques together provides a holistic approach to validate the purity and authenticity of olive oils., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). A.C.-A. acknowledges the support from Fondecyt Iniciación 11200620. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Fellowship (Grant No. 897148).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal Rectification and Thermal Logic Gates in Graded Alloy Semiconductors

  • Ng, Ryan C.
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
Classical thermal rectification arises from the contact between two dissimilar bulk materials, each with a thermal conductivity (k) with a different temperature dependence. Here, we study thermal rectification in a SiGe alloy with a spatial dependence on the atomic composition. Rectification factors (R = k/k) of up to 3.41 were found. We also demonstrate the suitability of such an alloy for logic gates using a thermal AND gate as an example by controlling the thermal conductivity profile via the alloy composition. This system is readily extendable to other alloys, since it only depends on the effective thermal conductivity. These thermal devices are inherently advantageous alternatives to their electric counterparts, as they may be able to take advantage of otherwise undesired waste heat in the surroundings. Furthermore, the demonstration of logic operations is a step towards thermal computation., We acknowledge the support from Spanish MICINN project SIP (PCG2018-101743-B-100). R.C.N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A.C.-A. acknowledges the support from the Fondecyt Iniciación 11200620.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Excitation and detection of acoustic phonons in nanoscale systems

  • Ng, Ryan C.
  • Sachat, Alexandros el
  • Céspedes, Francisco
  • Poblet, Martin
  • Madiot, Guilhem
  • Jaramillo-Fernandez, Juliana
  • Florez, Omar
  • Xiao, Peng
  • Sledzinska, Marianna
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
This article is part of the themed collection: Recent Review Articles., Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 authors thank the Severo Ochoa (Spanish Research Agency AEI, grant no. SEV-2017-0706) and the CERCA Programme / Generalitat de Catalunya. R. C. N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A. E. S. acknowledges support by the H2020-MSCA-IF project THERMIC-GA No. 101029727. F. C. acknowledges funding from the scholarship BES-2016-077203 funded by MCIN/AEI/10.13038/501100011033 and by “ESF Investing in your future”. O. F. is supported by BIST PhD fellowship Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 754558. P. X. additionally acknowledges support by a Ph.D. fellowship from the EU Marie Skłodowska-Curie COFUND PREBIST project (Grant No. 754558)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of Synchrotron Radiation-Based Fourier-Transform Infrared Microspectroscopy for Thermal Imaging of Polymer Thin Films

  • Chávez-Angel, Emigdio
  • Ng, Ryan C.
  • Sandell, Susanne
  • He, Jianying
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, C. M.
  • Kreuzer, Martin
The thermal imaging of surfaces with microscale spatial resolution over micro-sized areas remains a challenging and time-consuming task. Surface thermal imaging is a very important characterization tool in mechanical engineering, microelectronics, chemical process engineering, optics, microfluidics, and biochemistry processing, among others. Within the realm of electronic circuits, this technique has significant potential for investigating hot spots, power densities, and monitoring heat distributions in complementary metal-oxide-semiconductor (CMOS) platforms. We present a new technique for remote non-invasive, contactless thermal field mapping using synchrotron radiation-based Fourier-transform infrared microspectroscopy. We demonstrate a spatial resolution better than 10 um over areas on the order of 12,000 um2 measured in a polymeric thin film on top of CaF2 substrates. Thermal images were obtained from infrared spectra of poly(methyl methacrylate) thin films heated with a wire. The temperature dependence of the collected infrared spectra was analyzed via linear regression and machine learning algorithms, namely random forest and k-nearest neighbor algorithms. This approach speeds up signal analysis and allows for the generation of hyperspectral temperature maps. The results here highlight the potential of infrared absorbance to serve as a remote method for the quantitative determination of heat distribution, thermal properties, and the existence of hot spots, with implications in CMOS technologies and other electronic devices., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). The Research Council of Norway is acknowledged for the support to NorFab (Grant No. 295864) and the HEFACE project (Grant No. 251068). A.C.-A. acknowledges the support from the Fondecyt Iniciación 11200620., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cavity Optomechanics with Anderson-Localized Optical Modes

  • Arregui, Guillermo
  • Ng, Ryan C.
  • Albrechtsen, Marcus
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
Confining photons in cavities enhances the interaction between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes estimated to be below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed g_{o}/2π∼200  kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our Letter constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with a multitude of mutually coupled degrees of freedom., This work was supported by the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant No. SEV-2017-0706) as well as by the CERCA Program/Generalitat de Catalunya and the EU-H2020 FET Proactive project TOCHA (No. 824140). G. A. was supported by the project RTI2018-093921-A-C44 (SMOOTH). R. C. N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska-Curie (Grant No. 897148). P. D. gratefully acknowledges the support of a Ramon y Cajal fellowship (RYC-2015-18124) and C. M. S. T. acknowledges the support of the national project SIP (Grant No. PGC2018-104333-BI00). M. A. and S. S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optomechanical Generation of Coherent GHz Vibrations in a Phononic Waveguide

  • Madiot, Guilhem
  • Ng, Ryan C.
  • Arregui, Guillermo
  • Florez, Omar
  • Albrechtsen, Marcus
  • Stobbe, Søren
  • García Fernández, Pedro David
  • Sotomayor Torres, C. M.
13 pages, 4 main text figures, 6 appendix figures, Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while nonpiezoelectric demonstrations have been inefficient. In this Letter, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation around 6.8 GHz, operating at room temperature. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, Grant No. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R. C. N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). O. F. is supported by a BIST PhD fellowship under the Marie Sklodowska Curie Grant Agreement (No. 754558). M. A. and S. S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intermodulation of optical frequency combs in a multimode optomechanical system

  • Ng, Ryan C.
  • Nizet, Paul
  • Navarro-Urrios, D.
  • Arregui, Guillermo
  • Albrechtsen, Marcus
  • García Fernández, Pedro David
  • Stobbe, Søren
  • Sotomayor Torres, C. M.
  • Madiot, Guilhem
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the megahertz and gigahertz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in gigahertz phononic devices, signal processing, and optical comb sensing applications., We acknowledge the support from the project LEIT funded by the European Research Council, H2020 Grant Agreement No. 885689. ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, Grant No. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 research and innovation programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). O.F. is supported by a BIST Ph.D. fellowship under the Marie Sklodowska Curie Grant Agreement (No. 754558). M.A. and S.S. gratefully acknowledge funding from the Villum Foundation Young Investigator Program (Grant No. 13170), the Danish National Research Foundation (Grant No. DNRF147—NanoPhoton), Innovation Fund Denmark (Grant No. 0175-00022—NEXUS), and Independent Research Fund Denmark (Grant No. 0135-00315—VAFL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Quantum thermometry with single molecules in nanoprobes

  • Esteso, Victoria
  • Duquennoy, R.
  • Ng, Ryan C.
  • Colautti, M.
  • Lombardi, P.
  • Arregui, Guillermo
  • Chávez-Angel, Emigdio
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
  • Hilke, M.
  • Toninelli, C.
An understanding of heat transport is relevant to developing efficient strategies for thermal management in areas of study such as microelectronics, as well as for fundamental science purposes. However, the measurement of temperatures in nanostructured environments and in cryogenic conditions remains a challenging task, requiring both high sensitivity and noninvasive approaches. Here, we present a portable nanothermometer based on a molecular two-level quantum system that operates in the (3–20)-K temperature range, with temperatures and spatial resolutions on the order of millikelvins and micrometers, respectively. We validate the performance of this molecular thermometer by estimating the thermal conductivity of a nanopatterned silicon membrane, where we find a quadratic temperature dependence. In addition, we demonstrate two-dimensional temperature mapping via the simultaneous spectroscopy of multiple probes deposited onto such a suspended membrane. Overall, these results demonstrate the unique potential of the proposed molecular thermometer to explore thermal properties with submicron accuracy and unveil related phenomena manifested at cryogenic temperatures., This work is Co-funded by the European Union (ERC, QUINTESSEnCE, 101088394). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. It was funded by the the EC under the FET-OPEN-RIA project STORMYTUNE (G.A. 899587), from the EMPIR programme (project 20FUN05, SEQUME), co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program. Also financial support has been received from: PNRR MUR project PE0000023-NQSTI. V.E. acknowledges funding from European Union (NextGenerationEU), the Ministerio de Universidades of Spain, and the University of Seville under the Grant Margarita Salas. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). ICN2 is supported by the Severo Ochoa program, the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Far-field radiative thermal rectification based on asymmetric emissivity

  • Ng, Ryan C.
  • El Sachat, Alexandros
  • Jaramillo-Fernandez, Juliana
  • Sotomayor Torres, C. M.
  • Chávez-Angel, Emigdio
This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727). C.M.S.T. acknowledges support by the AGAUR SGR-CAT grant Nr. 2021-0100., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Far-field radiative thermal rectification based on asymmetric emissivity

  • Ng, Ryan C.
  • El Sachat, Alexandros
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Sotomayor Torres, Clivia M.
  • Chavez Angel, Emigdio|||0000-0002-9783-0806
This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727). C.M.S.T. acknowledges support by the AGAUR SGR-CAT grant Nr. 2021-0100.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Spectroscopic and thermal characterization of extra virgin olive oil adulterated with edible oils

  • Chavez Angel, Emigdio
  • Puertas, Blanca
  • Kreuzer, Martin
  • Soliva-Fortuny, Robert
  • Ng, Ryan C.
  • Castro-Álvarez, Alejandro
  • Sotomayor Torres, Clivia M.
he substitution of extra virgin olive oil with other edible oils is the primary method forfraud in the olive-oil industry. Developing inexpensive analytical methods for confirming the qualityand authenticity of olive oils is a major strategy towards combatting food fraud. Current methodsused to detect such adulterations require complicated time- and resource-intensive preparation steps.In this work, a comparative study incorporating Raman and infrared spectroscopies, photolumines-cence, and thermal-conductivity measurements of different sets of adulterated olive oils is presented.The potential of each characterization technique to detect traces of adulteration in extra virgin oliveoils is evaluated. Concentrations of adulterant on the order of 5% can be detected in the Raman,infrared, and photoluminescence spectra. Small changes in thermal conductivity were also foundfor varying amounts of adulterants. While each of these techniques may individually be unableto identify impurity adulterants, the combination of these techniques together provides a holisticapproach to validate the purity and authenticity of olive oils., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. ICN2 authors acknowledge the support from the Spanish MICINN project SIP (PGC2018-101743-B-I00). A.C.-A. acknowledges the support from Fondecyt Iniciacion 11200620. R.C.N. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Fellowship (Grant No. 897148).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Far-field radiative thermal rectification based on asymmetric emissivity

  • Ng, Ryan C.
  • El Sachat, Alexandros
  • Jaramillo Fernández, Juliana
  • Sotomayor Torres, Clivia M.
  • Chavez Angel, Emigdio
This experimental study investigates thermal rectification via asymmetric far-field thermal radiation on a fused silica slab. An asymmetrical distribution of surface emissivity is created over the device by partially covering the fused silica with a 100 nm thick aluminum film. The slab is subjected to a thermal bias, and when this bias is reversed, a small temperature difference is observed between the different configurations. This temperature difference arises from the difference in emissivity between the aluminum layer and fused silica, resulting in the transfer of thermal energy to the surrounding environment through radiation. Experimental findings are supported by finite element simulations, which not only confirm the measured values but also provide valuable insights into the rectification efficiency of the system. The rectification efficiency is found to be approximately 50% at room temperature for a thermal bias of 140 K. Simulations, which are performed by considering different environmental conditions experienced by the radiation and free convection processes, provide further insight into the underlying thermal rectification mechanism. These simulations consider an environmental temperature of 4 K for thermal radiation and an ambient temperature of 294 K for free convection and reveal an enhanced rectification effect with a rectification efficiency up to 600% when a thermal bias of 195 K is applied. This result emphasizes the significance of considering both convection and radiation in the thermal management and rectification of asymmetric systems. The outcomes of this study further our understanding of the thermal rectification phenomenon. They also show the importance of system asymmetry, emissivity disparities, environmental conditions, and the interplay between convection and radiation. Furthermore, the findings have implications for heat transfer and rectification in asymmetric systems, offering potential applications in areas such as energy harvesting, thermal management, and heat transfer optimization in electronic devices., ICN2 is supported by the Severo Ochoa program from the Spanish Research Agency (AEI, grant no. SEV-2017-0706) and by the CERCA Programme/Generalitat de Catalunya. R.C.N. acknowledges funding from the EU-H2020 Research and Innovation Programme under the Marie Sklodowska Curie Individual Fellowship (Grant No. 897148). A.E.S. acknowledges funding from the EU-H2020 research and innovation program under the Marie Sklodowska Curie Individual Fellowship THERMIC (Grant No. 101029727). C.M.S.T. acknowledges support by the AGAUR SGR-CAT grant Nr. 2021-0100., Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spectroscopic and thermal characterization of extra virgin olive oil adulterated with edible oils

  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Puertas, Blanca
  • Kreuzer, Martin|||0000-0002-7305-5016
  • Soliva Fortuny, Robert
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
The substitution of extra virgin olive oil with other edible oils is the primary method for fraud in the olive-oil industry. Developing inexpensive analytical methods for confirming the quality and authenticity of olive oils is a major strategy towards combatting food fraud. Current methods used to detect such adulterations require complicated time- and resource-intensive preparation steps. In this work, a comparative study incorporating Raman and infrared spectroscopies, photoluminescence, and thermal-conductivity measurements of different sets of adulterated olive oils is presented. The potential of each characterization technique to detect traces of adulteration in extra virgin olive oils is evaluated. Concentrations of adulterant on the order of 5% can be detected in the Raman, infrared, and photoluminescence spectra. Small changes in thermal conductivity were also found for varying amounts of adulterants. While each of these techniques may individually be unable to identify impurity adulterants, the combination of these techniques together provides a holistic approach to validate the purity and authenticity of olive oils.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal rectification and thermal logic gates in graded alloy semiconductors

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Classical thermal rectification arises from the contact between two dissimilar bulk materials, each with a thermal conductivity (k) with a different temperature dependence. Here, we study thermal rectification in a SiGe alloy with a spatial dependence on the atomic composition. Rectification factors (R = k/k) of up to 3.41 were found. We also demonstrate the suitability of such an alloy for logic gates using a thermal AND gate as an example by controlling the thermal conductivity profile via the alloy composition. This system is readily extendable to other alloys, since it only depends on the effective thermal conductivity. These thermal devices are inherently advantageous alternatives to their electric counterparts, as they may be able to take advantage of otherwise undesired waste heat in the surroundings. Furthermore, the demonstration of logic operations is a step towards thermal computation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Application of Synchrotron Radiation-Based Fourier-Transform Infrared Microspectroscopy for Thermal Imaging of Polymer Thin Films

  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Sandell, Susanne|||0000-0003-1906-6790
  • He, Jianying|||0000-0001-8485-7893
  • Castro-Alvarez, Alejandro|||0000-0001-8360-8027
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Kreuzer, Martin|||0000-0002-7305-5016
The thermal imaging of surfaces with microscale spatial resolution over micro-sized areas remains a challenging and time-consuming task. Surface thermal imaging is a very important characterization tool in mechanical engineering, microelectronics, chemical process engineering, optics, microfluidics, and biochemistry processing, among others. Within the realm of electronic circuits, this technique has significant potential for investigating hot spots, power densities, and monitoring heat distributions in complementary metal-oxide-semiconductor (CMOS) platforms. We present a new technique for remote non-invasive, contactless thermal field mapping using synchrotron radiation-based Fourier-transform infrared microspectroscopy. We demonstrate a spatial resolution better than 10 um over areas on the order of 12,000 um measured in a polymeric thin film on top of CaF substrates. Thermal images were obtained from infrared spectra of poly(methyl methacrylate) thin films heated with a wire. The temperature dependence of the collected infrared spectra was analyzed via linear regression and machine learning algorithms, namely random forest and k-nearest neighbor algorithms. This approach speeds up signal analysis and allows for the generation of hyperspectral temperature maps. The results here highlight the potential of infrared absorbance to serve as a remote method for the quantitative determination of heat distribution, thermal properties, and the existence of hot spots, with implications in CMOS technologies and other electronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Excitation and detection of acoustic phonons in nanoscale systems

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Sachat, Alexandros el|||0000-0003-3798-9724
  • Céspedes, Francisco|||0000-0001-5444-7113
  • Poblet, Martin|||0000-0002-8259-4660
  • Madiot, Guilhem|||0000-0003-2662-4324
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Florez, Omar|||0000-0001-6662-9811
  • Xiao, Peng|||0000-0002-4711-2566
  • Sledzinska, Marianna|||0000-0001-8592-1121
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Chávez Ángel, Emigdio|||0000-0002-9783-0806
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo preliminar (WorkingPaper)

Engineering nanoscale hypersonic phonon transport

  • Florez, Omar|||0000-0001-6662-9811
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Albrechtsen, Marcus|||0000-0003-4226-0997
  • Ng, Ryan C.|||0000-0002-0527-9130
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Stobbe, Søren|||0000-0002-0991-041X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • García Fernández, Pedro David|||0000-0002-3422-178X
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mechanical modes. Here, we demonstrate the complete absence of mechanical vibrations at room temperature over a broad spectral window, with a 5.3 GHz wide band gap centered at 8.4 GHz in a patterned silicon nanostructure membrane measured using Brillouin light scattering spectroscopy. By constructing a line-defect waveguide, we directly measure GHz localized modes at room temperature. Our experimental results of thermally excited guided mechanical modes at GHz frequencies provides an eficient platform for photon-phonon integration with applications in optomechanics and signal processing transduction.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Intermodulation of optical frequency combs in a multimode optomechanical system

  • Ng, Ryan C.|||0000-0002-0527-9130
  • Nizet, Paul
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Albrechtsen, Marcus|||0000-0003-4226-0997
  • García Fernández, Pedro David|||0000-0002-3422-178X
  • Stobbe, Søren|||0000-0002-0991-041X
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Madiot, Guilhem|||0000-0003-2662-4324
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the megahertz and gigahertz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in gigahertz phononic devices, signal processing, and optical comb sensing applications.